How to Resolve the Issue ofEpson Scan CannotCommunicate with theScanner?

Epson is one of the popular brands in thescanning gadgets industry and choice of millions.The scanner devices produced by the Epson are ofextremely high quality, but sometimes due toregular and rough use, it may encounter issues.One such problem that many Epson userswitnessed is the Epson Scan Cannot Communicatewith the Scanner. There can be many reasonsbehind this ranging from the drivers of thescanner to wrong configuration of the network.With the help of this post, you will get to knowabout the different methods that can help you inscanner repairing.

Method1: Run a software scannerwith administrative privileges

Make a right-click on the Epson Scan and then choose the option of“Properties”.Choose “Compatibility” tab under the option of “Properties” andcheck ‘Run this program as an administrator’. If in case theadministrator privileges don’t solve the problem you can later runthe application in compatibility mode.To save the changes click on “Apply” and then exit. Now switch offthe Epson scanner and detach the USB cable. Now, wait for fewminutes and set up the scanner again and check if the problem isresolved.

Running a scanning software with the administrative privileges can helpyou in fixing this issue. Doing so will help the scanner in performing thefunctions without any interruption and security checks. For this, youneed to change the settings of application and allow administrativeaccess. To do so for repairing the scanner follow the below steps:

Method2: Fix the wirelessconnectivity

Launch the settings of Epson Scan and click on the option of “Add underneath Network ScannerAddress.” Ensure that you are choosing the right scanner by making use of the option at the top of

the window.Now, navigate to the command prompt and fetch the correct address from their and type it in the

“Enter address”Click on the icon of Windows and type “cmd” in the dialogue box and open the application.

Type “ipconfig” in the command prompt and hit the Enter button. Also from the command prompt,copy the field “Default Gateway.”

Paste the copied default gateway into your browser and obtain your router. Now, log into yourrouter, see the list of connected devices to the network.

Head back to the scanner application, insert the address of the scanner and then click on Apply. Bydoing so your scanner will successfully be added, and you will be capable of getting the work done

without any problem.

Sometimes the error causes because the scanning application of Epson fails to connect the scanner tothe network LAN that is address automatically. To eliminate this problem, you can manually updatethe address by fetching it from the command prompt. To get your scanner repaired via this method,

you need to perform the following things:

Method 3: Restart the ShellHardware Detection

You need to press the Windows and “R” key and type “services.msc” in theappeared dialogue box, click enter.Now, search for the “Shell Hardware Detection”. Make a right-click on it and choosethe “Properties” option.You need to ensure that the startup type is established to “Automatic”. Once youmake sure, this close the window and make a right-click on the option of “Service”once again and choose the “Restart” option.Now moving towards the next step, disconnect your Epson scanner from thecomputer and plug-in back after a couple of seconds to check whether the problempersists.

The work of Shell Hardware Detection service is to do surveillance and givesnotifications for autoplay events of the hardware. This service is considered useful foridentifying the scanners, printers or any other removable storage devices. If there is anissue with this service, there is every possibility that your device will not detect thescanner. In this case, you can restart this service and reconnect the Epson scanner. Todo so, you need to follow the steps mentioned below:

Method4: Turn off the password thatprotects sharing

Tap the Windows and “S”, a dialogue box will appear on the screen type“advanced sharing” in this.Select the option of “Private” and check the option, you need to turn on the“File and Printer Sharing”.In the next step, you need to press “All Networks” and disable passwordprotected sharing.Click on “Save Changes” present at the bottom of your screen.Disconnect your scanner from the computer and plug in it back after a coupleof minutes.

A password that protects your sharing sometimes also generates such problem.Passwords protection doesn’t allow all the users to connect to your network andaccess the data on your system until they provide the matching password. Bydisabling this, you can eliminate the error and can repair your scanner. To do sofollow the below steps:

For more information visit:https://www.epsonprintersupport247.com/fix-epson-scan-cannot-communicate-with-the-scanner/

Team Epsonsupport 247.