how to program an encoder with ubifast
TRANSCRIPT
How to Program a POSITAL Encoder with the UBIFAST Configuration Tool
Quickly Program with any WiFi-Enabled Device
No Software, No App, No Installations
Easy to Program!
Try it!Quick and
Easy!
Programm your Encoder in 5 Easy Steps!
Connect the Hardware
Power Device
Step 1
Works with PC‘s, Tablet‘s and Smartphone‘s WiFi
Use a WiFi Enabled Device
Step 2
Connect to Wifi HotspotChoose POSITAL Confi guration Tool at the network list
Open the WebbrowserGo to ubifast.fraba
Click Next and Start Confi guration
Confi guration Instructions for Smart Phones
Step 3
Pulses Per Revolution (PPR)Any value between 1 and 16384 pulses
Incremental Pulse Direction„A before B“ or „B before A“
Incremental Output DriverPush-Pull (HTL) / 8 – 30 V Supply VoltageRS422 (TTL) / 5 V Supply Voltage orRS 422 (TTL) / 8–30 V Supply Voltage
Click Next
Enter Incremental Parameters
Step 4
Verify the Incremental Parameters
Click „Confi gure“ to start programming the encoder
Review Parameters
Step 5
Your Confi guration was Successfull
Step 6
Email Parameter to POSITAL for Future References
Step 7
Find What You Need!www.posital.com
UBIFAST Configuration Tool
Quickly Program with any WiFi-Enabled Device
Easy to Program!