how to patch an apc campbell company. extract zip file and open folder for patch double click on ips...
TRANSCRIPT
How to Patch an APCCampbell Company
• Extract Zip file and open folder for patch• Double Click
on ips text file
• Make sure the IP address matches the APC you are going to Patch• Save file
• If you have not patched the APC before you may need to validate the key• To do this Double
click on Putty
• Type in the APC’s IP address and click open• Click yes when
prompted by the security key• Close out of the
session
• Now you are ready to patch• Double click on
patch (the Batch file)• When done, you
will need to either power cycle the APC or double click on reboot at the bottom of the files