how to make an adjustable ring diy jewelry making tutorial
TRANSCRIPT
How to Make An:Adjustable Ring
Materials:2mm Aquamarine Beads2mm Blue Beads2mm Gold Beads6 Inches of 20 Gauge Wire24 Inches of 26 Gauge Wire
Tools”Ring MandrelAnvil and HammerWire Cutters
Step 1:Wrap your 20 gauge wire around your ring mandrel in order to fit to your individual size.
Step 2:Wrap your 26 gauge wire around your base of your ring while trying to keep your wires as close together as possible to ensure a beautiful finish.
Step 3: Slide on your gold bead and then your blue bead and wrap your 26 gauge wire around each of the beads. This will hold your beads in place and not allow them to move anywhere while working on your ring.E and put
Step 4:Insert another gold bead onto the other side of the wire and put your ring back onto the mandrel to ensure it is the right size. Wrap the wire around the gold bead once more.
Step 5:Repeat step 4 by adding another blue bead to the other side and wrapping your wire around it to ensure a tight hold.
Step 6:Cut another piece of your 26 gauge wire and wrap it around the base of your ring. This will allow you to slide another blue bead on and wrap your wire around it just like you have previously done.
Step 7:Repeat these steps to get the desired amount of beads onto your ring. Once you have wrapped all of your beads, your beautiful new ring is complete!