how to make a paper plane by mark thompson have you ever wanted to make a paper plane but you...
TRANSCRIPT
How to Make a Paper How to Make a Paper PlanePlane
By Mark ThompsonBy Mark ThompsonHave you ever wanted Have you ever wanted to make a paper plane to make a paper plane but you didn’t know but you didn’t know how, well now with how, well now with these instructions you these instructions you can make:can make:
• A Glider A Glider
andand • A Simple Stunt Plane`A Simple Stunt Plane`
A Glider (A4)A Glider (A4)
Throw just a bit of Force at about a 30 to 40 degree angle toward the sky. The dart, if made correctly should be accurate and travel a long Distance
Instructions to make a Glider
Step1
Fold a piece of A4 paper in half longways. Then fold the top corners down as shown.
Step 2
Fold in the sides so that point A and B meet at the centre
crease
Instructions to make a Glider
Step 3
Fold Points C and D into the centre as shown above
Step 4
Turn the model over and fold it in half longways
Instructions to make a Glider
Step 5
Fold down the wings so that the edge of the wing meets the bottom or fuselage of the plane.
Step 6
Now the plane is complete so have fun flying it. For
Throwing suggestions see the Introduction of the
glider .
A Stunt Plane (Foolscap)A Stunt Plane (Foolscap)
Loops - throw the plane vertically with a fair amount of pressure
Circles - hold the plane on it’s side and throw slightly upwards
Gliding - throw the plane gently in the direction you want it to go
Instructions to make a Stunt Plane
Step 1
Fold and then unfold the following folds, from A - D, B - C and E - F
Step 2
Push point E to point F so that when completed it looks
like the picture above
Instructions to make a Stunt Plane
Step 3
Fold the triangular part at the top over
Step 4
turn the plane over and fold points A and B into the centre so that they touch
Instructions to make a Stunt Plane
Step 5
Fold point C over so that it covers points A and B
Step 6
Turn the plane over again and fold it in half
Instructions to make a Stunt Plane
Step 7
Fold down the wing so that their edges go down about 5mm past the bottom of the plane
Step 8
The plane is completed why not try it out or take a look at the introduction for tips on throwing.
Happy Flying