how to install Nissan Consult 3

Diagnostics Software

The installation manual of Nissan Consult 3 Diagnostic Software, This user manual will

guide how to install & crack Nissan consult 3 software on your laptop, If you have any

question, you can contact with us:

http://www.vipprogrammer.com/oem-diagnostic-tool-consult-iii-for-nissan-consult-3-progr

ammer-1180

Step 1: Open the DVD of Consult III software, click Consult-iii-* setup.exe

Step 2: Just show Nissan Consult III Setup Wizard

Step 3: Choose the installation path of Consult III

Step 4: click Install Consult III software

Step 5: wait for the Installshield Wizar

Step 6: Choose: accept the terms of Nisscan Consult License agreement

Step 7: Choose Northamerica market(NAM), click next

Step 8: Choose North America

Step 9: choose U.S.A

Step 10: you also can choose others lanuage

Step 11: the installtion of Consult - III software succeeded

The installation guide of Nissan Consult III USB drive

Connect the Consult III firmware with your pc by USB cables, and connect the Consult III

hardware with your car via OBD-II 16pin diagnostic plug, supply 12V power to Consult III

firmware.

Step 1: Found New hardware( nissan Consult III) Wizard, choose "Yes,this time only"

Step 2: Choose Install the Consult III software automatically

Step 3 Choose JCI-iB-Alliance verhicle interface, just click next

Step 4: just click finish, completing Consult III hardware drive installation

How to Crack Nissan Consult III software, and configure Consult III software

Step 1: Open Consult III software on desktop

Step 2: perhaps show these error: there are no registered VI/MI,

please contact your administrator, just ignore, click "OK"

Step 3: click "SUB" button

Step 4: click Administrator setting

Step 5: input Consult III Password -- nissanconsult3

Step 6: Choose VIMI registration

Step 7: Input Consult III VI serial number: 926573, and click: set

Step 8: Click the home button

Step 9: then click: "Connect" button

Step 10: the Consult III will found hardware, show: checking the firmware version

Step 11: choose the Function of Consult III software, just enjoy it

Q: Nissan consult 3 support diagnostic: vi models ?

A: Yes. For this nissan consult iii, there are two models in total: MI and VI. VI is for

diagnose and MI is for waveforms test.

Q: How to register VI/MI? When i install the Consult 3 software, it prompt me “you do not

register VI / MI, please contact the administrator”.

A: pls read the above user installation manual of nissan consult III.