How to Import an Excel File Using the SAS Import Wizard SAS 9 for Windows

Download How to Import an Excel File Using the SAS Import Wizard SAS 9 for Windows

Post on 02-Apr-2015

235 views

Category:

Documents

4 download

Embed Size (px)

TRANSCRIPT

<ul><li>Slide 1</li></ul> <p>How to Import an Excel File Using the SAS Import Wizard SAS 9 for Windows Slide 2 Go to the File menu and select Import Data Slide 3 Choose the file type. Note: Click on the arrow at right of file format box to get a list of file types. Select the appropriate file type, then click Next. Slide 4 In the Connect to MS Excel window, Browse to the file name. Browse to the folder where you saved the Excel files. Slide 5 Locate and select the filename, in this example, group1.xls Note: You will see a list of files to select. If you have selected the file type as Excel, you will only see files that have the filename extension .xls.After selecting group1.xls, click on Open. Slide 6 Click on OK to select the file. Verify your file selection by clicking on OK. Slide 7 Select the correct sheet from the list. The arrow at the right provides a pull-down list of available sheets. Select the correct sheet, and then click on Next&gt;. Slide 8 Save the data set and click on Finish or Next. The library selected may be WORK, or another library you have previously defined. Type the SAS data set name in the Member: box. Click on Finish to implement the import, or Next to save commands for importing. Use Next for homework 1. Slide 9 Create SAS statements to import the data. If you selected Next you may now save SAS statements in a command file to use later. After specifying the file name, click Finish. For homework 1, you will save a command file called homework1.sas. Be sure you remember where you save the file, so you can pull it up later. Slide 10 Check the SAS log to be sure the data set was created For homework 1, you should see a NOTE: that says WORK.group1 was successfully created. Slide 11 From the Editor Window, Open the saved SAS statements For homework 1, you would open homework1.sas from the Enhanced Program Editor window. Slide 12 Browse to the name of your saved commands For homework 1, you would open the command file, homework1.sas, from the folder where you previously saved it. Slide 13 Modify the commands, so you can import group2.xls. You will copy and paste the commands for each Excel file. Slide 14 Submit your commands.. In the Program Editor Window, highlight the commands to import the data for all of the 8 groups. Submit by clicking on the running figure icon. Slide 15 Check the Log Window to be sure all your data sets were properly created. Slide 16 Type a data step to combine data for all groups. Highlight and submit the data step commands. Check the SAS log to make sure your commands worked properly. Slide 17 Submit commands for the rest of the homework. 4 Type the commands for each procedure, submit them, and check the results. 4 Re-save your command file. 4 The SAS commands in the Enhanced Program Editor window can be copied and pasted into a Word document for your homework. 4 Output from the SAS output window can also be copied and pasted into a Word document for your homework. 4 You cannot edit the SAS output in SAS, but you can in Word. </p>

Recommended

View more >