how to flash t-mobile to android
TRANSCRIPT
-
8/2/2019 How to Flash T-Mobile to Android
1/11
How to flash T-Mobile HD from WinMobile to Android
unpack this File
You get this folders
This is the driver for MT6516
This is the driver for flashcable
USB to serial
This is the IMEI write Tool
This is the FlashTool
In this folder is the complete system
Android folder incl. scatter.txt
Database for IMEI Tool
Important: Note your IMEI Number !!!
The IMEI Number is behind the battery in the phone
-
8/2/2019 How to Flash T-Mobile to Android
2/11
1. Install the driver for the flashcable
remember the com-port
2. Start the flashTool
-
8/2/2019 How to Flash T-Mobile to Android
3/11
Select your com-port
Select your baudrate
-
8/2/2019 How to Flash T-Mobile to Android
4/11
1. Choose project WinMo
2. Search MTK_AllInOne_DA.bin
3. Search MT6516_WinMo_scatter.txt
4. Press format
Check this box, its slower but saver
-
8/2/2019 How to Flash T-Mobile to Android
5/11
9. You can set the format length according to the size of the Rom
of your phone. If the rom is 256 M, you can set it to
0x10000000. If the rom is 512 M, you can set it to 0x20000000.
10. Please select OK, when you finish the setting.
11. Connect the flex cable from your phone to the PC. Your
phone should be off power at this moment.
12. press and hold the power key on your phone until the
progress bar start to move.(If the progress bar hasnt moved,
you just to remove the battery and put it on again to try.)
The green progress bar takes app. 7-8 minutes. Hold the
powerkey all the times.
13.It will pop up the OK when the setting have finished.
-
8/2/2019 How to Flash T-Mobile to Android
6/11
Now we are ready to flash to ANDROID
Start the FLASH TOOL
1. Select Android on the point 1
2. Please note the point 2, here is set to the
T6516_Android_scatter.txt, this software is a loader file which is to
guide the whole flashing process.
3. In general, we provided Android rom will have this file. Please use
the file within the Android Rom instead of the same name file of the
kit.
4. Finally, according to the chart above to do the settings of each file
for the Android. Double-click the file name, it will pop up the file
selection box.
5. Please Double-click the UBOOT of point 3 and select the file with
uboot as prefix within the rom package if the point 3 cant load the file
automatically.
-
8/2/2019 How to Flash T-Mobile to Android
7/11
Install the driver of MTK usb( If you have finished this setting,
please do the next steps)
Please click the download( Please plug the special flex cable of 2303 and regular data cable to the
PC, because you need to use the data cable during the flexing.)
Now press and hold the power key on your phone until the progress bar start to move.( If the
progress bar doesnt move, you just to remove the battery and put it on to try again.)
Please plug the data cable after the progress bar finished 2 times 100%. Now the PC will tell you it
had found the new hardware of mt6516.
Now you need to use the driver of mtk usb. During setting the driver, it just can appear this driver
The mt6516 will only show up for one minute. If you see it was gone from the list of device
manager, please remove the data cable and then plug it again, then mt6516 will be shown up
again
When the driver has been installed, remove the USB data cable and then plug it again. Now youshould be able to find the usb modem driver in the PC device manager, that means the driver has
been installed successfully.
5Flex the Android
Please click the download( Please plug the special flex cable of 2303 and regular data cable to the
PC, because you need to use the data cable during the flexing.)
Now press and hold the power key on your phone until the progress bar start to move.( If the
progress bar doesnt move, you just to remove the battery and put it on to try again.)
Please plug the USB after the progress bar finished 2 times 100%. It will pop up the OK when the
flexing is completed.
-
8/2/2019 How to Flash T-Mobile to Android
8/11
Before the yellow bar start, you have to look here !
Because after the red and the purple bar you have only
5 Seconds to plug in the USB Data Cable. So you use the
flashcable and the USB Datacable at the same time.
If it was finish there popup a OK
Kongratulation
The next step is to write the IMEI into the phone
The IMEI Number is behind the battery in the phone
-
8/2/2019 How to Flash T-Mobile to Android
9/11
-
8/2/2019 How to Flash T-Mobile to Android
10/11
according to the chart above to do the settings:
1 = write IMEI+BackUP nvram
2 = smartphone
3 = meta mode
4 = 115200
5 = Input the port of the flex cable had contacted by your PC
6 = active this box
7 = active this box
8 = Browse and open
BPLGUInfoCustomApp_MT6516_S01_MAUI_10A_W10_48
within the Rom package
9 = Browse and open APDB_MT6516_S01_10YW1048MP_W10.52
within the Rom package
Now press Start or F6
Type your IMEI in
Two times the same number1234567891011
1234567891011
For example
-
8/2/2019 How to Flash T-Mobile to Android
11/11
press enter, press and hold the power key on your phone after
inserting the battery, then you can see the meta mode in the left
botton corner on your phone
Wait for this picture as blew appeared on your PC,
then the IMEI flexing process is finished.
If all is fine, you phone looks like mine
Best regards and good luck from GeoBroker from chinamobiles.org