how to connect to dss v6 to another dss v6 with an iscsi target volume
TRANSCRIPT
-
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
1/15
Software Version: DSS ver. 6.00 up13
Presentation updated: September 2010
How to Connect aDSS V6 to another DSS V6
with an iSCSI Target Volume
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/products/open-e-dss-v6/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
2/15
2www.open-e.com
1. Hardware configuration
2. Configure Destination Node:
Create a Volume Group, iSCSI volume and target on the DSS2,
3. Connecting iSCSI target Volume using iSCSI Initiator on DSS1
Connect to iSCSI target Volume from DSS2 using iSCSI Initiator on DSS1
Create a Volume Groups (vg01), on DSS1
TO SET UP A BACKUP USING AN ISCSI TARGET VOLUME OVER A LAN,
BETWEEN TWO DSS V6 SYSTEMS, PERFORM THE FOLLOWING STEPS:
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
3/15
3www.open-e.com
Volume Group (vg00) Volume Group (vg00)
ISCSI volume (lv0000)
iSCSI Target: Target0
Data Server (DSS1)Source node
IP Address:192.168.0.220
iSCSI initiator
RAID System 1 RAID System 2
Data Server (DSS2)Destination node
Address IP:192.168.0.240
1. Hardware configuration
Volume Group (vg01)
NAS volume (lv0100)
iSCSI Target Volume
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
4/15
4www.open-e.com
2. Configure Destination Node
Volume Groups (vg00)
In Unit manager add theselected physical units (Unit
MD0 or other) to create a newvolume group (in this case,
vg00) and click apply button.
Under the CONFIGURATIONtab, select volume managerand next Vol. Groups.
How to Connect to an iSCSI Target Volume over a LAN
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
5/15
5www.open-e.com
2. Continue
Select the appropriate volume
group (vg00
) from the list on
the left. In the Action fieldselect a new iSCSI volume forthe required size.
After assigning an appropriate
amount of space for the iSCSI
volume, click the apply button.
Now select the required size of
iSCSI volume. In this example
we will be adding 450 GB for
the iSCSI volume.
How to Connect to an iSCSI Target Volume over a LAN
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
6/15
6www.open-e.com
The destination iSCSI Volume
Block I/O is now configured.
iSCSI volume (lv0000)
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
2. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
7/157www.open-e.com
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
Choose CONFIGURATION , iSCSI target manager andTargets from the menu
iSCSI targets
In the Create new target, clickthe apply to confirm.
2. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
8/158www.open-e.com
Select target0 within theTargets field.
Assign a volume to the target,
click the button locatedunderAction.
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
iSCSI targets
2. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
9/159www.open-e.com
Data Server (DSS2)Destination node
IP Address: 192.168.0.240
The destination iSCSI target is
now configured.
iSCSI targets (target0)
2. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
10/1510www.open-e.com
iSCSI initiators
Choose SETUP, iSCSIinitiators. In Add new portalserver, in field Portal IP enterthe IP Address of targets on the
destination node (in ourexample this would be
192.168.0.240) then click on
the apply to confirm.
Data Server (DSS1)Source node
IP Address: 192.168.0.220
3. Connecting the iSCSI target Volume using iSCSI Initiator
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
11/1511www.open-e.com
Data Server (DSS1)Source node
IP Address: 192.168.0.220
iSCSI initiators
In Portal manager select thename of the iSCSI targets and
click the connect button.
Select 192.168.0.240 within thePortals field.
3. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
12/1512www.open-e.com
Data Server (DSS1)Source node
IP Address: 192.168.0.220
iSCSI initiators
iSCSI target:
iqn.2009-12:dss2.target0 has
been connected successfully.
3. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
13/1513www.open-e.com
Data Server (DSS1)Source node
IP Address: 192.168.0.220
iSCSI initiators
Next, click on the iSCSI target
name within the Portals, in thisexample the name is:
iqn.2009-12:dss2.target0 .
In the Target manager you canview the connected target's
name as well as its size.
3. Continue
How to Connect to an iSCSI Target Volume over a LAN
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
14/1514www.open-e.com
Data Server (DSS1)Source node
IP Address: 192.168.0.220
Volume Groups (vg00)
Under the CONFIGURATIONtab, select volume managerand next Vol. Groups.
The configuration of connecting to
an iSCSI target Volume
is now complete.
In the Unit manager selectphysical units (Unit S003) to
create a new volume group (inthis case, vg01) and clickapply button
How to Connect to an iSCSI Target Volume over a LAN
3. Continue
http://www.open-e.com/http://www.open-e.com/http://www.open-e.com/ -
7/29/2019 How to Connect to DSS V6 to another DSS V6 with an iSCSI Target Volume
15/1515www open-e com
Thank you!
Follow Open-E:
http://www.open-e.com/http://blog.open-e.com/http://forum.open-e.com/http://kb.open-e.com/http://www.linkedin.com/companies/open-ehttp://www.facebook.com/pages/Open-E/148433081839890http://www.youtube.com/user/OpenEchannelhttps://twitter.com/storagesoftwarehttp://www.open-e.com/http://www.open-e.com/