how to configure dch-m255 play to with a windows phone · how to configure – dch-m255 play to...

How to Configure – DCH-M255 play to with a Windows Phone

Device Required:

Smart Phone PC / Laptop D-Link Wi-Fi Configuration Card External Speakers or Headphones

Step 1 – Insert the DCH-M225 into a Power Socket and press and hold the reset button

for 30 seconds

Step 2 – Once it has been reset you should see a flashing “Orange” LED

Step 3 – Connect to the Wireless Network by searching for the SSID which will be

located on the D-Link Wi-Fi Configuration Card.


Step 4 – Select the SSID and when prompted enter the password which will be located

on the D-Link Wi-Fi Configuration Card.

Tap on “done”


Step 5 – You will be presented with a prompt that there is no internet connection

available.

Tap on “connect”


Step 6 – Once connected to the Wi-Fi network of the DCH-M225, open Internet

Explorer and enter the following URL: http://dlinkap.local/

http://dlinkap.local/


Step 7 – Select Language then tap on “Login” to enter Setup Wizard


Step 8 – Select your language

Tap “Next”


Step 9 – You will now be presented with “Select Configuration Method”. There are two choices:

-- Select this option if your wireless device supports WPS(Wi-Fi Protected Setup)

-- Select this option if you want to setup your network manually

Step 9-1 – If your router supports WPS, select this option

Tap “Next”


You must press both WPS buttons on the DCH-M225 and the Router or AP to start the

connection, the follow the instructions


Step 9-2 – If your router doesn’t support WPS, you will need to select the option by “Setup your network manually”

Tap “Next”


You should notice the configuration wizard will be scanning for wireless networks as

below


Step 10 – Tap to select the wireless network provided by your router or AP

Tap “Select”


Step 11 – Enter the WiFi Password to connect

Tap “Next”


Step 12 – Choose if you would like to give a name for your “Extended Network” or use the existing WiFi Network. In this example, we are using the same Wi-Fi network

name

Tap “Next”


Step 13 – Choose a name for the “Device”. In this example we left as default “DCH-

M225”.

Tap “Next”


Step 14 – The setup is complete and you will be presented with a summary of the

setup

Tap “Save” and you will be presented with a prompt displaying the settings are being saved and device rebooting


Step 15 – Once rebooted you should automatically be reconnected to the WiFi network

selected in Step 10 (If not you will need to connect to this network). Once connected,

you will be taken to the “Current Status” page


Step 16 – Insert one end of the Audio 3.5mm Jack into the DCH-M225 and the other

into the input jack of your speakers. Once this has been accomplished, you will notice

a connection to the Audio Render on the “Current Status” page


Step 17 – To play music from your Windows Phone to the speakers you will need to

open the following program “Lumia Play to” – Tap “music”


Step 18 – Select an artist and tap screen to accept


Step 19 – Tap the play icon


Step 20 – Tap to connect


Step 21 – Your music should now be playing and heard from the speakers

End of Document

how to configure dch-m255 play to with a windows phone · how to configure – dch-m255 play to...

Documents