how does your electronic switch work? · yes, it’s true. we will replace or repair your...
TRANSCRIPT
Yes, it’s true. We will replace or repair your electronic switches, if any defects or faults are encountered within 5 years of product's lifetime. For more information on your warranty, see the Installation Guide.
MK Elements Collection Electronic Switch5 year warranty
by Honeywell
Operating the Electronic Switch
How does your Electronic Switch work?
Switching ON / OFF
Touch here to turn the light ON / O�.
ON
Switch’s Status
Illuminates at full brightness
Illuminates at low brightness
No illumination
Illuminates at full brightness
No illumination
Flashing at full brightness
OFF
Overload*
* The switch will resume normal operation after it is switched o� and turned back on, with the overload removed.
Fitting and removing frontplate
Give your Electronic Switch makeoverDo your wiring devices match your room decor? Are you redecorating and want to update the look of your wiring devices?
You can change the look of your Electronic Switch by simply changing the frontplate. Check out the wide range of colours, materials and �nishes online at www.mkelectric.com, then order through your local electrician.
Fitting the frontplate
Locate top hooks on front plate to top edge of module.
Lower front plate, locating hooks on sides and bottom edge.2
1
Indication Ring
www.mkelectric.comwww.mkelectric.com
MK ElectricThe Arnold Centre, Paycocke Road, Basildon, Essex SS14 3EA. UK
50091734-001 Rev.A
Technical Help
Tel: Fax: [email protected]
Technical Help
Tel: Fax: [email protected]
+44 (0)1268 563720+44 (0)1268 563064+44 (0)1268 563720+44 (0)1268 563064
Customer Service
Tel: +44 (0) 1268 563000Fax: +44 (0) 1268 563405Fax: +44 (0) 1268 563365 (International)
Customer Service
Tel: +44 (0) 1268 563000Fax: +44 (0) 1268 563405Fax: +44 (0) 1268 563365 (International)
Carefully insert a 4mm screwdriver into the slots provided along the bottom edge of the frontplate.
Carefully twist the screwdriver and lift the frontplate away disengaging the snap �ts.
2
1
Removing the frontplate