how do i install blades in my cricut maker?...learn.cricut.com help.cricut.com...

Click here to load reader

Post on 20-Aug-2020

2 views

Category:

Documents

0 download

Embed Size (px)

TRANSCRIPT

  • Guid

    eC

    ricut Maker: B

    lade Installatio

    n • 1/2

    How Do I

    Install Blades in My Cricut Maker?Installing your blades in the Cricut Maker is easy!

    Let’s Start

    Tips

    1. Securely seated housing

    It is important that your blade housing is seated on the top surface of the B clamp; if the housing it seated too high, your blade will not contact your material. See the im-ages below for some examples of correctly and incorrectly installed blade housings.

  • Guid

    eC

    ricut Maker: B

    lade Installatio

    n • 2/2

    2. Clamp closure

    When closing the clamp arms around the blade housing, close the left arm first; the left arm has an indentation which will fit snugly around the housing. Holding the left arm in place, swing the right arm around and close the plastic tab. The clamp arms will be very secure around the housing, and it may require some gentle pressure to close the plastic tab; this is normal. When properly closed, the plastic tabs for clamps A and B will align.

    Additional Resources

    Learn.cr icut.comHelp.cr icut.comInspirat ion.cr icut.comAll About Cricut BladesHow do I change the blade in my Cricut machine?Cricut Maker: Knife Blade cal ibrat ionCricut Maker: Knife Blade FAQWhich materials should I cut on the different machine mat gr ip strengths?

    http://learn.cricut.comhttp://help.cricut.comhttp://inspiration.cricut.comhttps://help.cricut.com/hc/en-us/articles/360009432294-All-About-Cricut-Bladeshttps://help.cricut.com/hc/en-us/articles/360009379054-How-do-I-change-the-blade-in-my-Cricut-machine-https://help.cricut.com/hc/en-us/articles/360009559453-Cricut-Maker-Knife-Blade-calibrationhttps://help.cricut.com/hc/en-us/articles/360009557073-Cricut-Maker-Knife-Blade-FAQhttps://help.cricut.com/hc/en-us/articles/360009554153-Which-materials-should-I-cut-on-the-different-machine-mat-grip-strengths-https://help.cricut.com/hc/en-us/articles/360009554153-Which-materials-should-I-cut-on-the-different-machine-mat-grip-strengths-