7/24/2019 Hovel Free Sample Instructions

1/1

David Graffam 2009. Permission granted to print for personal use only. Distribution is prohibited.

ASSEMBLY INSTRUCTIONS:To create thismodel, you will need 1 sheet of cardstock,scissors, a hobby knife and glue. Follow thetrimming guides on this page. Cut along theblack lines with scissors or a hobby knife.Scorewith a hobby knife and fold back alongthe redlines.Starting with the largest sections,

glue along the tabs and t the pieces togetherusing the images as your guide. For the roof,fold the tabs all the way under and glue at,then glue the roof to the tabs at the tops of thewall sections. Optionally, you can nish thismodel by using a ne-line black marker to llin the white edges.

PRINTING TIPS

This le is set up for the standard 28mm-30mm tabletopwargaming scale, and for US letter-sized (8.5 x 11)sheets. Turn o any t to page options in your printerdriver. If you are printing on A4-sized sheets, you maywant to reduce the print size to 95% of the original. Do thisconsistently when printing these les.

Print on heavy cardstock whenever possible. You can createsuper-sturdy models by printing on plain paper and thengluing this to a heavy bristol board before cutting.

DIFFERENT SCALESTo print at a smaller scale, usethe table below and change yourprint size percentage.

SCALE %

25mm 84%

20mm 65%

18mm (HO) 60%

15mm 50%12mm 40%

10mm (N) 34%

8mm 27%

(Z) 23%

6mm 20%

THEHOVEL30MMSCALECARDSTOCKTERRAINF ILES

BY DAVEGRAFFAM

www.davesgames.net