Instructions for Installation and Use

DishwasherModel BFV620

2D ISHWASHER

3D ISHWASHERContents

Retention of this Instruction BookThis Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of theappliance.

If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is alsoprovided so the new owner can become familiar with the appliance and safety warnings.

If the Book is lost or damaged a copy may be obtained from:Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB.

Electrical ConnectionFor Your SafetyInstallationGetting to know your DishwasherThe ControlsHow to use your DishwasherProgramme ChartBefore Using your DishwasherLoading your DishwasherCare and CleaningTroubleshootingInformation for Test LabsAfter Sales ServiceHotpoint GuaranteeNotesKey Contacts

4567789

10-11121314151617

18-19Back Cover

4D ISHWASHERElectrical Connection

FusesYour appliance comes fitted with a plug and a 13A fuse. If you need toreplace the fuse, only those rated at 13A and ASTA approved toBS1362 should be used. If you lose the fuse cover, a replacementmay be obtained from your local authorised Service Centre orElectrical company. Correct replacement is identified by colour codingor the marking on base of plug.

WARNING: DO NOT use the plug unless the fuse cover is fitted.

WARNING: The dishwasher must not be connected to theelectricity supply while installation is being carried out.

WARNING: This appliance must be earthed.

Changing the PlugCut off and dispose of the supplied plug if it does not fit your socket.WARNING: To avoid a shock hazard DO NOT insert thediscarded plug into a socket anywhere else.IMPORTANT: WIRES IN THE MAINS LEAD ARE COLOURED INACCORDANCE WITH THE FOLLOWING CODE:Green/Yellow - EarthBlue - NeutralBrown - Live

If you change the plug, the colour of the wires in the mains lead maynot correspond with the terminal markings in the plug, which if notcoloured, could be:EARTH E orNEUTRAL NLIVE L

Changing the Mains LeadA lead can be ordered from Hotpoint ServiceUK: 08709 066 066 orRepublic of Ireland: 1850 302 220If you have damaged the existing lead or require a longer one acharge will be made. It is strongly advised that this work is carried outby a qualified electrician.

If the domestic wiring includes a residual current-operated circuitbreaker, ensure that it conforms to the latest regulations.

Safety InformationAt the time of delivery...All functions of your dishwasher have been thoroughly tested at thefactory. A small number of water marks may have been left as aresult, they will disappear when the appliance is used for the first time.

- This appliance should only be connected to a 230/240V ACsource, via a properly installed earthed socket.

- Use the dishwasher solely in a domestic environment.- DO NOT stand or place heavy objects on the door when it is

open, this could damage the door or cause the appliance to tipforward.

If your family includes children...- DO NOT allow children to play with the appliance or tamper

with its controls.- Keep detergents and rinse aids away from children. Keep

children away from the open door of a dishwasher, there couldstill be some detergent left inside.

CAUTION:The dishwasher meets the requirements set out by the regulations inforce concerning safety and electrical equipment.Any technical checks should be conducted exclusively by a trainedand authorised technician: Repairs carried out by unaithorisedpersons will invalidate the guarantee, as well as posing a potentialhazard to the user.

The manufacturer declines all responsibility for damage to persons orproperty resulting from failure to observe the above precautions, fromtampering with even a single component or from the use of non-original spare parts.

5D ISHWASHERFor your SafetyThis manual forms an integral part of the appliance. It must always be kept handy for reference. Read through all the instructions contained in thismanual before using this dishwasher.

1. Seperate the variouspackaging materials anddispose of safely - DO NOTleave discarded packagingmaterial around the home.

2. After removing the packaging,check to make sure yourappliance is intact. If in doubt,contact a qualifiedprofessional.

3. DO NOT use extension leadsand multiple plugs. If theelectricity supply wire is notlong enough, then have itreplaced with one of the correctlength and remember that itshould be free of bends ordangerous kinks.

4. In the event of any damage tothe power cord have itreplaced by a qualifiedtechnician.

5. The mains plug must beeasily accessible afterinstallation.

6. If the appliance is notoperating properly or ifmaintenance operations arenecessary, disconnect thedishwasher from the mainspower supply (unplug it!).

7. DO NOT install outdoors, noteven if the area is covered bya roof: it is extremelydangerous to leave it exposedto rain and thunderstorms.

8. If installed on a carpeted orcovered floor, ensure that theopenings on the underside arenot obstructed.

9. Do not touch the heatingelement during or straight aftera wash cycle.

10. If the appliance malfunctions,turn off the water inlet tap anddisconnect the plug from thewall socket. Then read thesection entitled"Troubleshooting". If youcannot resolve the problem,then call Hotpoint Service(see KEY CONTACTS, backpage).

Installation must be performed by a qualified technician, in compliancewith the regulations in force, including the prevention and elimination ofradio frequency interference.The dishwasher is designed for washing and drying dishes, anyother use shall be considered improper. The manufacturer declinesall responsibility for uses other than those described above.

The rating plate, featuring thetechnical data, serial numberand markings, is visiblypositioned on the inner edge ofthe door.DO NOT remove the rating plate.

The dishwasher is intended for use by adults. DO NOT allowchildren to come near or play with the controls.

Keep children away from detergents and clear of the dishwasher doorwhen open.Keep all packaging material away from children.

1. DO NOT use solvents, such as alcohol or turpentine which maycause an explosion.

2. DO NOT load dishes to wash that are soiled with ash, wax or paints.3. DO NOT lean, sit or stand on any part of the dishwasher - this could

cause injury and/or damage the appliance.4. DO NOT drink any water residues from inside the dishwasher.

6D ISHWASHERInstallation

Cold water connection.Connect the cold water supplyhose, and making sure that it isfastened tightly in place . If thewater hoses are new or have beenout of use for an extended period oftime, let the water run to make sureit is clear and free of impuritiesbefore making the connection. If thisprecaution is not taken, the waterinlet could get blocked, causingdamage to your dishwasher.

Choose where you want to installyour dishwasher, you can place itso that its sides or back panel areside by side with furniture or upagainst the wall. The dishwasher isprovided with water supply and drainhoses, which can be directedtowards the left or right to facilitateappropriate installation.

Levelling.Once the appliance is positioned,adjust the feet by screwing them inor out depending on how high youwant it and to level it so that it ishorizontal. Make sure that it is notinclined more than 2 degrees. If theappliance is level, it will help ensureits correct operation.

Height AdjustmentInsert the appliance into the cutoutand then adjust the height using thescrews located on the front bottompart of the machine. Use ascrewdriver to turn the screws inthe clockwise or anti-clockwisedirection to increase or decreasethe height respectively.

Adjusting the back FeetInsert the appliance into the cutoutand then adjust the height using thescrews located on the front bottompart of the machine. Use ascrewdriver to turn the screws inthe clockwise or anti-clockwisedirection to increase or decreasethe height respectively.

Drain hose connection.WARNING: Connect yourdishwasher drain hose to pipeswhich connect to the foul drainsystem and not to surface waterdrains.IMPORTANT: For the correctoperation of your dishwasher, it isessential to comply with the followinginformation:-

Standpipe:Ensure that the hose is not pushedtoo far down the standpipe.If the end of your drain hose is fittedwith retaining flaps, ensure they areinserted fully into the standpipe. Thiswill prevent the pipe from jumpingout during installation and use.

DO NOT position the standpipenear an electrical outlet.ENSURE that the drain hose is notkinked and it is routed as shown inthe diagram.

The standpipe should have a boreof at least 38mm (11/2). It shouldbe installed as shown, have a trapfitted and must discharge into thesame drain system as yourhousehold sink.It MUST NOT be connected to asurface water drain.

Sink Waste System:For under sink drainage:Before connecting the drain hose,remove any internal restrictions -This will prevent a build up of debriswhich could cause a blockage.Remove any restrictions from thewaste spigot and ensure that thesealing bung is removed. The hoseshould be routed, such that it israised to a minimum height of800mm (31/2).

NOTE: Ensure the sink outletpipe has a minimum diamtere of32mm.

1. Untie the end of the GREYdrainage hose from the rear ofthe appliance.2. Reposition the Hooked EndSupport as required along theGREY drainage hose.3. If fitting an under sink wastedisposal unit, cut out themembrane, bung or blankingplug.

Ensure the drain hose issecurely attached, to preventit coming away while themachine is in use and causinga flood.

Condensation-proof tape.On some models, a transparentcondensation-proof adhesive tapehas been provided.It should be stuck onto the lowerside of your wooden worktop toprotect it from the formation ofcondensation.When not provided, this tape canbe requested as a spare part fromauthorised retailers.

7D ISHWASHERGetting to know your Dishwasher

Technical Characteristics

The ControlsA. ON-OFF Button

Press this button to switch theappliance on.

B. ON-OFF Indicator lightThis light informs you that thedishwasher is on.

C. Door opening handleUse this handle to open thedishwasher door.

D. Wash Programme SelectorUse this knob to select the cycle.

E. Cycle phase indicator light(pre-wash, wash, rinses, drying)

E. Upper basket

F. Top spray arm

G. Basket height adjusterH. Lower basket

I. Bottom spray arm

J. Salt container cap

K. Washing filterL. Detergent and rinse aid

dispenser

This dishwasher conforms to thefollowing European CommunityDirectives:

73/23/EEC of 19/02/73 (LowVoltage) and subsequentmodifications;

89/336/EEC of 03/05/89(Electromagnetic Compatibility)and subsequent modifications

97/17/CE(Labelling)

J

L

K

H

F

E

G

I

Technical characteristicsWidth cm. 59,5Depth cm. 57Height cm. 82Capacity 12 standard place settingsMains water pressure 4,3 psi - 145 psi (30 KPa 1MPa )(0,3 10 bar)Power voltage See data plateTotal absorber power See data plateFuse See data plate

AB

C

DE

8D ISHWASHER

First of all.- Turn on the water supplytap completely.- Add the correct amountof detergent.- Load the basketscorrectly.- Check that the sprayarms rotate freely.- Close the door securely.

- Press the ON-OFF button "A":indicator light "B" comes on. Yourappliance is now on and ready tobe programmed.

Select the wash cycle.To select the wash cycle, turn knob"D" clockwise until the indicator onthe knob lines up with the numberor symbol for the wash cycle mostsuitable for the type of dishes towash (see Programme Chart).After a few seconds, you will heara short beep: the wash cycle hasstarted, it is not advisable to makeany changes from this point.

Indicator lightsYour dishwasher is fitted with indi-cator lights (E) that come on to showyou at which point the wash cycleis at.Here are the symbols correspond-ing to each cycle phase:Starting from the indicator light onthe left moving towards the one onthe right: pre-wash, wash, rinses,drying.

At all times, your dishwasher tellsyou where it is at.

Modifying a wash cycle inprogress.If you have chosen the wrong cycle- You can modify the wash cycle inprogress, if it has only just started.Turn knob "D" anti-clockwise andset it to Reset, after a few secondsyou will hear 3 short beeps andIndicator light "E" will go out to showall the settings will have been can-celled. You are now free to re-setthe correct wash cycle.

You've left out a dish?Interrupt the wash cycle by press-ing the ON-OFF button, insert thedish you had forgotten and pressthe ON-OFF button again.The cycle will start up from whereyou interrupted it.

Cycle endThe end of the wash cycle is indi-cated by 2 short beeps and a flash-ing drying phase indicator light .Set the knob to the reset position toclear all settings.

How to use your Dishwasher

There's been a powerfailure or you opened thedishwasher doorThe wash cycle stops and thenrestarts when the electricity comesback on or when you close the door.

Turn the appliance off bypressing button A, unplug theappliance from the electricitysocket to cut off the powersupply; the power supply cableshould consequently be easilyaccessible.

Warning!

Turn off the water tap.Wait a few minutes before unload-ing the dishes: they are very hot! Ifyou wait a little while, they dry betterdue to the steam.Empty the lower basket first.

9D ISHWASHERProgramme ChartSelect the most suitable programme for the type of dishes and how dirty they are. To select the wash programme see the chart below:

To optimise wash performance and save on energy, try to use the dishwasher with a full wash load. If it takes some time to fill yourdishwasher, use the soak cycle to avoid caked on food and build up of bad odours.

&\FOH &\FOHVHOHFWLRQLQVWUXFWLRQV &\FOHGHVFULSWLRQ

HWHUJHQWIRUSUHZDVKZDVK

5LQVH$LG

:DVKF\FOHGXUDWLRQWROHUDQFH

,QWHQVLYH:DVK

9HU\GLUW\GLVKHVDQGSDQVQRWWREHXVHGIRUGHOLFDWHLWHPV

3UHZDVKZLWKKRWZDWHUDW&:DVKDW&5LQVHVZLWKFROGZDWHU5LQVHZLWKKRWZDWHUDW&U\LQJ

J

DLO\:DVK

&\FOHIRUQRUPDOO\GLUW\SDQVDQGGLVKHV6WDQGDUGGDLO\F\FOH

:DVKDW&ROGULQVH5LQVHZLWKKRWZDWHUDW&U\LQJ

J

(QYLURQPHQWDOO\IULHQGO\F\FOHZLWKORZHQHUJ\FRQVXPSWLRQOHYHOVVXLWDEOHIRUQRUPDOO\GLUW\SDQVDQGGLVKHV

&ROGSUHZDVKHV:DVKDW&+RWULQVHDW&U\LQJ

J

6RDNLQJ

3UHOLPLQDU\ZDVKF\FOHIRUGLVKHVZKLOHDZDLWLQJFRPSOHWLRQRIWKHORDGZLWKWKHGLVKHVIURPWKHQH[WPHDO

6KRUWFROGZDVKWRSUHYHQWIRRGIURPGU\LQJRQWRWKHGLVKHV

10

D ISHWASHERBefore Using your Dishwasher

Adjusting the water softener.Your dishwasher can adjust its saltconsumption according to the hard-ness of the water in your home.This way, you can optimise andcustomise your dishwasher's saltconsumption.To adjust salt consumption, do asfollows:1. Unscrew the salt container cap2. There is an arrow on the neck

of the container (see figure): ifnecessary, turn the arrow anti-clockwise from the "-" settingto the "+" setting.

Select the arrow positiondepending on the waterhardness, referring to the table.

To prevent rustfrom forming, loadthe salt just beforebeginning a wash

cycle .

Water Hardness

Clarkedegrees

fH mmol/lSelectorposition

Saltconsu-mption(grams/-cycle)

Autono-my(cycles\2-kg)

0 - 14 0 - 17 0 -1,7 / 0 /

14 - 36 18 - 44 1,8 - 4,4 "-" 20 60

36 - 71 45 - 89 4,5 - 8,9 MED 40 40

>71 >89 > 8,9 "+" 60 25

Filling the salt container.Always use salt which is intendedfor dishwasher use.The salt container is situatedunderneath the lower basket, fill itup as follows:1.Pull out the lower basket

completely, unscrew andremove the container cap

2. If it is the first time you add thesalt, first fill the container up withwater (you won't have to do thisagain next time)

3. Put the dishwasher funnel on thehole and pour in approximatelytwo kilos of salt. It is normal thatsome water comes out of thecontainer.

4. Screw the cap back in placecarefully.

Low Salt indicatorThis green device is located at thecentre of the cap for the decalcifica-tion cartridge and it indicates whetherthe container is full.When the indicator is not visible itmeans that you need to add salt.

Salt

You don't know how hardthe water in your home

is? Ask the company thatsupplies water in your

area.

WarningThree-in-one dishwasher tablets are now available on the market, and combine detergent, salt and rinse aid all in one.If the water in your area is hard or very hard, we still recommend you pour extra salt into the relevant dispenser to prevent theformation of white streaks on your dishes or on the interior of the appliance.Using a three-in-one product means it is no longer necessary to put rinse aid into the relevant container.If you want to achieve perfectly dry dishes, you may add rinse aid as long as the dosage adjuster is set to no.2.In any case, please read the manufacturers instructions on the packet.

11

D ISHWASHER

Rinse aid.Rinse aid makes dishes sparklemore as it improves their drying. Therinse aid container is situated on theinside of the appliance door, youshould refill it when light D indicatesthat it is empty.(If your dishwasher is fitted with alow rinse aid indicator light, fill thecontainer up when the indicator lightflashes or lights up).

Adding rinse aid.To open the dispenser, turn cap Canticlockwise. Take care when youpour in the rinse aid to avoid itoverflowing. You can regulate theamount of rinse aid used by thedishwasher, move the adjuster Fwhich you will find under lid C.

The detergentAdding detergentTo open lid A, press button B.The detergent should be put into thetwo containers C and D.If using a tablet, put it in container"D".Now you can close the lid: press itdown until you hear it click.

If it won't closeCheck whether there is anydetergent residue on the edges ofthe dispenser. Remove the excess.

You can choose from six different positions.It is normally set to 4.

Before Using your Dishwasher

- The amount of rinse aidneeds to be increased if thedishes appear dull or you cansee circular stains.- The amount of rinse aidneeds to be reduced if thedishes are sticky or you cansee white streaks.

*If you live in an area particularlyprone to very hard water ( 35f)Glist and Hotpoint recommendthat you continue to keep yourdishwasher salt topped up.

Use the right amount ofdetergent (see programmechart).

Store your detergent and rinseaid in a cool, dry place, safelyaway from children.

F

D

C

We recommend Glist 3 in 1 for use in all Hotpoint dishwashers...Brilliant cleaning is guaranteed with Glist 3 in 1.Hotpoint only recommends Glist 3 in 1 Dishwasher tablets to give outstanding cleaning andcare.It is important to use detergent specially designed for domestic dishwashers. (Always follow themanufacturers instructions.)Glist 3 in 1 advanced dishwasher tablets with active enzymes are the ideal way to protect and care foryour dishwasher, while getting your dishes and glasses sparking clean.

Softer Water:Built in salt action softens water, helping to prevent the build up of limescale in the dishwasher andimprove the cleaning result*.Cleaner Dishes:With unique active enzymes in the cleaning phase Glist 3 in 1 breaks down even the hard to shiftfoodstuffs and grease, leaving the dishes spotless and the dishwasher clean too.Sparkling Results:The built-in Glist rinse agent ensures the dishes and glasses are free from water marks and smears.

If you have any questions regarding Glist 3 in 1, please contact the hotline on 0800 216 730.

CD

25 gr. 5 gr.

A

B

12

D ISHWASHERLoading your DishwasherFirst of all.Before placing dishes in thebaskets, remove all course foodremains. This avoids blocking thefilter, which would reduce theefficiency of the wash.If saucepans and frying pans arevery dirty, allow them to soak beforebeing washed.To make it easier to load yourdishes, pull the baskets out.

What goes into the lowerbasket?We recommend you place the mostdifficult dishes to wash into thelower basket: saucepans, lids, soupdishes and plates (a load exampleis shown in the photo). Serving dishes and large lids:

place them on the sides of thebasket.

Saucepans, salad bowls: mustalways be placed upside down

Very deep dishes: place themobliquely, thus allowing water torun down them and cleaningthem better

This basket is equipped with tworemovable grids: insert the cutleryone by one into the slots; knivesand utensils with sharp blades ortips should be positioned with thesharp parts at the bottom. Positionall cutlery items so that they don'ttouch.If the basket is the one with sideinserts, then insert the tea spoonsone by one into the slots.

lower basket

It is best if you place longer utensilshorizontally at the front of the upperbasket.After loading the dishes, rememberto check that the spray arms canturn freely without hitting againstany dishes.

What goes into the upperbasket?Place delicate and lightweightdishes in the upper basket: glasses,tea cups and coffee cups, saucersand plates - shallow salad bowls,slightly dirty frying pans andshallow pans.Position lightweight dishes in suchas way as to avoid their beingmoved by the spray of water.

How to adjust the upperbasket.The upper basket can be set in highor low position to enable you toorganise your dishes effortlessly.

Load examples

upper basket

lower basket

upper basket

Open the rail stop flaps and pull thebasket out completely. Now placeit in high or low position, then slideit along the guide rails until the frontwheels also go in. Now close therail stop flaps. Follow the sequenceof actions illustrated in figure "F".

1 2

34Fig.F

What can I Wash Items not suitable for the dishwasher: Cutlery and tableware made from wood or part wood - They may become faded and unsightly in appearance. Avoid washing horn handled and bronze cutlery in the machine. Delicate/decorative glassware and vases, special antique or irreplaceable china - the decorative patterns

printed on these items will not be dishwasher proof. Plastic objects that are not resistant to hot water. Copper and Pewter utensils. Aluminium and Sliver objects. Some types of glass can become opaque in appearance after they have been washed too many times in a

dishwasher. Highly absorbent materials such as sponges and towels should never be placed in a dishwasher. If in any doubt, check with the manufacturer on items suitability for dishwashers.WARNING: Dishes or cutlery soiled with tobacco ash, wax, lubricating grease or paint should not be put

in the dishwasher.

Our recommendation: In future, only purchase table or kitchenware that has been confirmed - dishwasherproof.

13

D ISHWASHERCare and Cleaning

Cleaning the spray arms.Food residue may becomeencrusted onto the spray arms andblock the holes where water comesout. Check the spray arms regularlyand clean them once in a while.

DO NOT use solvents orabrasives to clean the exterior andrubber parts of your appliance, donot use solvents or abrasivecleaning products. Use a clothdampened with lukewarm soapywater only.If there are any stains on the surfaceof the appliance interior, use a clothdampened with water and a littlewhite vinegar, or a cleaning productspecifically made for dishwashers.

Unplug the appliance.Before carrying out any cleaning ormaintenance on the dishwasher,always remove the plug from theelectricity socket.

After every wash.When the wash cycle has ended,always remember to turn off thewater supply tap and to leave theappliance door ajar. This way,moisture and bad odours will not betrapped inside.

The seals.One of the factors that causeunpleasant odours to form insidethe dishwasher is food that remainstrapped in the seals. Periodiccleaning using a damp sponge willprevent this from occurring.

Going awayIf the dishwasher is not going to beused for some time, carry out thefollowing: run a cycle with the dishwasher

empty. switch off at the electrical socket

and unplug. turn off the water supply tap,

disconnect the inlet hose andallow to drain.

fill the rinse aid dispenser. leave the door ajar, to prevent the

build up of unpleasant odoursinside the dishwasher.

Before using the dishwasher aftera long break, plug in and switch onat the electrical socket. Reconnectthe inlet hose and turn on the watersupply tap. Check there are nodeposits of rust inside the waterpipe, if there are allow water to runfrom the supply tap for a fewminutes.

Moving the appliance.Drain water from the dishwasher.Secure all loose parts. Onlytransport in an upright position. If not kept upright during transport,

any water remaining inside mayseep into the control module andcause subsequent errors withprogramme functions.

Disconnecting thedishwasher.When disconnecting thedishwasher it is important that tasksare carried out in the correctsequence. switch off at the mains and remove

the plug from the socket. turn off the water supply. disconnect drain and water inlet

hose. pull out the dishwasher, carefully,

withdrawing hoses at the sametime.

The filter assembly IIf you want consistent goodresults from your dishwasher, youneed to clean the filter assembly. The food particles are removedfrom the wash water, allowing it tobe recirculated during the cycle,filtered perfectly. For this reason, itis a good idea to remove the largerfood particles trapped inside thesemi-circular filter A and cupCafter each wash; to remove thefilter assembly, pull the cup handleupwards. All you need to do is rinsethem under running water. The entire filter assembly shouldbe cleaned thoroughly once amonth: semi-circular filter A + cupC + cylindrical filter B+ microfilterD.To remove filter B, turn it anti-clockwise. Use a small non-metallic brush for cleaning.

Reassemble the filter parts (asshown in the figure) and reinsertthe whole assembly into thedishwasher. Position it into itshousing and press downwards.The dishwasher is not to be usedwithout filters. Improperreplacement of the filters mayreduce the efficiency of the washand even damage your dishwasher.

1

2 AB

C

14

D ISHWASHER

Caution- Do not forget that repairs should only be carried out by a qualified specialist. Improper repairs can lead to considerableequipment damage, as well as danger to the user.- The dishwasher must first be disconnected from the electricity supply before any repairs or other work can be carried out.Switch off at the mains socket and water supply and remove the plug.

If the dishwasher won'tstart, check...n Is the dishwasher plugged in at

the electricity socket andswitched on?

n Is there a power failure, checkother appliances.

n Check the fuse.n Is the water supply tap turned

on?n Is the water inlet hose connected

properly?n Is the pressure of the water

supply sufficient?n Is the inlet hose kinked?n Is the filter on the water supply

hose blocked?n Is the dishwasher door not closed

properly?

If water remains inside thedishwasher, check...n the drain hose is not kinked.n the drain syphon is not

obstructed.n the dishwasher filters are not

clogged.

If the dishes are not beingcleaned properly, check...n the correct amount of detergent

has been added.n there is regenerating salt in the

salt container.n the dishes have been loaded

correctly.n the selected programme is

suitable for the type of dishes andthe degree of soiling.

n all filters are clean and positionedcorrectly.

n the spray arm nozzles are notobstructed.

n there is nothing obstructing therotation of the spray arms.

If the dishes fail to dry orremain dirty, check...n there is rinse aid inside the rinse

aid container.n the rinse aid dispenser setting is

correct.n the detergent being used is of

good quality and has not lost itseffectiveness (for example,through incorrect storage, withthe box left open).

If the dishes show signs ofstreaking, staining etc.check...n the rinse aid dispenser setting is

not set too high.

If there are visible tracesof rust inside the tank,check...n the cap off the salt container is

securely closed and that thewater softner setting is correct.

n the correct amount of detergentis being used. Certain detergentscan be more corrosive thanothers.

n the tank is made of steel andtherefore any rust marks are dueto external elements (fragmentsof rust from the tank pipes, pots,cutlery etc.) Special products arecommercially available to removesuch marks.

Error messagesYour dishwasher is equipped with asafety system which is able to de-tect operating faults.These faults are reported by one ortwo cycle phase indicator lights "E"flashing rapidly. Take note of whichlights are flashing, turn the applianceoff and call Hotpoint Service for tech-nical assistance.

Tap off alarmIf you have forgotten to turn the wa-ter tap on, your appliance will re-mind you of this by sounding a fewshort beeps for a few minutes. Turnthe tap on and your appliance willstart up again after a few minutes.Were you to be absent when thesebeeps are sounded, the appliancewill be blocked automatically andcycle phase 2 and 3 indicator lights(wash and rinse) will flash rapidly.Turn the appliance off at the ON-OFF button, turn on the water tapand wait approximately 20 secondsbefore turning the appliance backon.Re-select the wash cycle and theappliance will start up again.

Clogged filter alarmIf the appliance is blocked andcycle phase1 and 3 indicator lights(pre-wash and rinses) flash rapidly,this means the filter is clogged bylarge particles of food residue. Turnthe appliance off, clean the filterthoroughly and reposition it in itsseat as illustrated on page 13. Thenturn the appliance back on.Re-select a wash cycle as indi-cated in the "Selecting the washcycle" paragraph and the appliancewill start.

Water load solenoid valvemalfunction alarm.If indicator light 2 (wash) flashesrapidly, TURN the dishwasherOFF AND BACK ON AGAINafter one minute. If the alarmpersists, first turn off the watertap to avoid any flooding and thencut off the electricity supply andcall for technical assistance.

If after all the checks, the appli-ance still does not operate or theproblem persists, call HotpointService (see KEY CONTACTS,back page) and inform them of:- the type of problem- the abbreviation of the model name(Mod.) and the relative numbers (S/N) written on the rating platelocated on the inner edge ofthe door.

Switch off at the mains socketand remove the plug. Turnoff the water supply.

Troubleshooting

Resolving minor problems yourself.Experience has shown that you can resolve most problems that arise during normal daily usage yourself, without havingto call out a service engineer. Not only does this save costs but it also means the appliance is available for use againthat much sooner. The following list of common occurences and their remedies should help you identify the causes ofmost problems.

15

D ISHWASHERLoad for 12 Standard Settings tests (upper rack at top position)

INFORMATION FOR TEST LABS

D

C

FComp.3Comp.2

Loading the Rinse AidTo open the dispenser, turn the "C" cap in the anti-clockwisedirection and then pour in the rinse aid, making sure not tooverfill. The amount of rinse aid used for each cycle can beregulated by turning the dose adjuster F which you will findunder lid C.There are 6 different settings; the normaldosage is setting 5.

This basket is equippedwith two removablegrids: insert the cutleryone by one into theslots, with the handlesat the bottom. Positionthem so that they don'ttouch.

Loading the detergentThe cleaning detergent should be introduced into the twocontainers Comp.2and Comp.3(see table at the endof the page).After pouring in the detergent, replace the lid, pressing downuntil it clicks.

B

128

A

C

1

A

4

C

1

D

1

C

1

C9

i

1 1

f

e

2e

5 5

e

k1h

12

g

6

g

6

L o w e r b a s k e t U p p e r b a s k e tTy p e Ite m D ia m e te r Vo lu m

(a p p rox im a te ly )Ty p e Ite m D ia m e te r /Vo lu m

(a p p ro x im a te ly )A s o u p e p la te 2 3 c m . e c u p 0 ,2 0 l.B d in n e r p la te 2 6 c m . f s e r v in g

b o w l1 9 c m .

C d e s s e r tp la te

1 9 c m . g g la s s 2 5 0 m l.

D o va l p la tte r 3 5 c m . h s a u c e r 1 4 c m .

h s a u c e r 1 4 c m . k s e r v in gb o w l1 3 c m .

i s e r v in gb o w l

1 6 c m .

78 6 4 5123

3 3 3 3 3 35 5 5 5 5 54 4

3

3

3

3

4 4 4 4 4 4

1 1 1 1 1 1

2

2

2

2

2

2

1

1

1

1

1

1 2

4 4 4 4

5 52 2 3

2 35 5 5 5

2 2

door side

IEC/ DIN 30 gr.

EN 50242Cycle

Eco

Eco+extra dry*

Total detergent

30 gr.Comp.2 Comp.3

25 530

* Press the extra dry button, if existing.

16

"No company is better positioned to offer an after sales service on aHotpoint appliance than us - the manufacturer"

As part of our commitment to you, all Hotpoint appliances have the added benefit of a fully inclusive partsand labour guarantee for the first 12 months. In addition to this you also have the advantage of free

replacement parts for the first 5 years when fitted by a Hotpointengineer. When the 12 months parts and labour guarantee expires we offer the following after sales

service options:

Repair Service and Information Help DeskUK: 08709 066066

www.theservicecentre.co.ukRepublic of Ireland: 1850 302 200

Note: Our operators will require the Model number and the Serial number of your appliance

Available 364 days a year with a fast, effective and value for money service. We have the largest whitegoods repair service in the UK with over 1200 of our own fully trained engineers. All repairs include a

parts and labour guarantee for 12 months from the date of the repair.If you require any information or have any questions about your appliance, our operators are on hand with

help and advice. All this ensures that you will receive the best available after sales service possible.

Extended WarrantiesUK: 08709 088 088

www.theservicecentre.co.ukRepublic of Ireland: 1850 502 200

Whether you have just one or a number of Hotpoint appliances in your kitchen, we offer two service coverplans to give you total peace of mind.

l Repair Protection Plan - FREE service repairs for a single Hotpoint appliance during theperiod of cover.

l Kitchen Cover - FREE service repairs for all your Hotpoint appliances less than 8years old.

Genuine Parts and AccessoriesUK: 08709 077 077www.theservicecentre.co.uk

Republic of Ireland: (01) 842 6836

A wide range of genuine parts and accessories are available from our hotline or through our web site.Genuine parts and accessories, extended warranties and service repairs are all

available on our web-site at:

www.theservicecentre.co.uk

After Sales Service

17

Guarantee"Satisfaction guaranteed or your money back"

We give you a unique 'satisfaction guaranteed' promise - valid for 90 days - after you havepurchased your Hotpoint appliance. If there is a technical problem simply call Hotpoint Repair service

or visit our web-site at www.theservicecentre.co.uk and where necessary, we will arrange for anengineer to call. If the technical problem is not resolved under this guarantee, we will replace your

machine or, if you prefer, give you your money back.

All Hotpoint appliances carry a fully inclusive 12 month parts and labour guarantee as well as freereplacement parts for the first 5 years (except microwaves, selected integrated appliances and cookerhoods, which have a one year guarantee) provided that they are fitted by a Hotpoint engineer.

Guarantee terms and conditionsYour guarantee is only applicable in the United Kingdom or Republic of Ireland and is subject to thefollowing provisions that your appliance:l Has been installed and used correctly in accordance with this instruction booklet.l Has been used solely for domestic purposes and is located on domestic premises (ie. not

for commercial or trade use).l Has been properly connected to a suitable electrical supply voltage as stated on the

appliance rating plate.l Has not been subject to misuse, accident, modified or repaired by anyone other than one of

our own service engineers.

For pre purchase information on any other Hotpoint product call: 08701 50 60 70or visit: www.hotpoint.co.uk

Recycling & Disposal InformationAs part of Hotpoint's continued commitment to helping the environment, Hotpoint reserves the right touse quality recycled components to keep down customer costs and minimise material wastage.Please dispose of packaging and old appliances carefully.To minimise risk of injury to children, remove the door, plug and cut mains cable off flush with theappliance. Dispose of these parts separately to ensure that the appliance can no longer be pluggedinto a mains socket and the door cannot be locked shut.

18

D ISHWASHER

NOTES

19

D ISHWASHER

NOTES

October 2004

Over 1200 trained specialists, directly employed by us, ensure that you can have complete confidence inboth the appliances and services we offer.

Repair Service and Information DeskUK: 08709 066 066

(Open 8 to 8 Mon - Fri, 8 to 6 Sat, 10 to 4 Sun & Bank Holidays)www.theservicecentre.co.uk

Republic of Ireland: 1850 302 200Note: Our operators will require the following information:

Model number:

Serial number:

Extended WarrantiesUK: 08709 088 088

(Open 8 to 8 Mon - Sun)www.theservicecentre.co.uk

Republic of Ireland: 1850 502 200

Genuine Parts and Accessories UK: 08709 077 077

(Open 8-30 to 5-30 Mon - Fri & 9 to 12 Sat)www.theservicecentre.co.uk

Republic of Ireland: (01) 842 6836

Merloni Elettrodomestici UK Ltd. Morley Way, Peterborough, PE2 9JB.

Key Contacts

After Sales Service

P/195042021.03