hot & cold pipe supports - sekisui foam australia...traditional pipe supports are commonly limited...
TRANSCRIPT
-
Thermobreak Themaloc XT is a new generation closed cell foam pipe support offering superior compression performance, an extremely low k value and excellent heat resistance.
HOT & COLD PIPE SUPPORTS
Thermaloc XT
PHYSICALLYC R O S S L I N K E DS E K I S U I T E C H N O L O G Y
®
NEW
-
TECHNICAL SPECIFICATIONSThermaloc XT
SiZE AvAiLABiLiTy
Other sizes available on request.
8-mm 50m X 1200 mm rolls
10-mm 20m X 1200 mm rolls
12-mm 20m X 1200 mm rolls
15-mm 20m X 1200 mm rolls
20-mm 20m X 1200 mm rolls
25~50-mm 2300mm X 1200mm sheets
Product Certification may be plant specific. Please consult with your local representative.
Technical Specifications
Distributed by
Thailand Plant700/329 Moo 6, Amata Nakorn Industrial Estate,Tumbol Donhua-Ioh, Amphur Muang Chonburi 20000Tel: +66 38 213219-26Email: [email protected]: www.thaisekisui.co.th
Australian Plant1-5 Parraweena Rd, PO BOX 2898, Taren Point NSW 2229 AustraliaTel: +61 2 9525 9880Email: [email protected] Web: www.sekisuifoam.com.au
PHySiCAL PRoPERTiES
Material: Physically (irradiation) crosslinked closed cell polyolefin foam with factory applied reinforced aluminium foil and acrylic adhesive backing
Density: 25 kg/m3 (foam core only)
Thermal Conductivity: 0.032 W/m/°K (@ 23°C mean temp.)(ASTM C518) 0.036 W/m/°K (@ 36°C mean temp.)
Water vapour Permeability: 8.19 x 10-15 kg/Pa.s.m(ASTM E96) (0.029 mg.m/N.h)
Water vapour Permeance: 3.3 x 10-4 g/MN.s
Water absorption by volume: 20,000
Resistance to fungi: Zero Growth(ASTM G21)
ozone Resistance: Excellent
Uv Resistance: Excellent
Noise Reduction Coefficient: 0.20 (12mm foam thickness)(ISO 354) 0.30 (25mm foam thickness)
operating Temperature Range: -80 °C ~ +100 °C (no adhesive)
GreenStar Rating: Low VOC Emitting(ASTM D5116)
Physical Property Requirements: COMPLIES (Type II - Sheet)(ASTM C1427)
REACH Directives: COMPLIES(1907/2006/EC)
FiRE AND SMoKE BEHAvioUR
BS476 Parts 6 & 7: CLASS 0
AS1530 Part 3 Ignitability Index: 0
Spread of Flame Index: 0
Heat Evolved Index: 0
Smoke Developed Index: 0-1
ASTM E84: COMPLIES (NFPA 90A & B)Flame Spread Index: High compression resistance, which allows Thermobreak Thermaloc XT to bear the weight of heavier pipes.
> Excellent chemical resistance.
> Closed cell so will not absorb moisture or degrade over time.
> Quick and safe application.
> Superior heat resistance compared to other pipe supports on the market.
> Compliant to AS1530.3 as required by the NCC of Australia (when foil faced):
Ignitability Index 0
Spread of Flame Index 0
Heat Evolved Index 0
Smoke Develop Index 2
Benefits of Thermaloc XTShear & Tensile Strength and Crush Resistance
Pipes contract and expand when undergoing swift temperature changes and can put a lot of force on a pipe support.
Thermaloc XT is a highly engineered material, designed to withstand extreme shear & tear strengths, temperature fluctuations and pressure from pipe movements.
Superior Thermal Properties
Thermaloc XT has a k value of 0.037 w/mK, which is in line with Thermobreak pipe insulation. These improved thermal properties in combination with the closed cell material mean greater protection from sweating and moisture absorption.
Hardness
Thermaloc XT has a exceptionally high compressive strength allowing for larger weights to be supported.
** Note: The force on a pipe support varies in accordance with the pipe size, the pipe type and the spacing from one pipe support to the next.
Heat Resistance
Traditional pipe supports are commonly limited to a maximum operating temperature of 100 deg C. Thermaloc XT is made from an innovative new material that can be used in temperatures up to 150 degrees C without compromising compressibility of the bloc.
*subject to pipe, size, & spacing between blocs. Contact Sekisui for further advice.
Size Availability
Wall thickness available: 13mm, 15mm, 20mm, 30mm, 40mm, 50mm, 63mm and made to order wall thickness and ID.
Length on pipe: 50mm is the standard supplied thickness however Thermaloc XT can be joined together in multiples of 50mm to provide longer lengthblocks such as 100mm, 150mm & 200mm
Physical Properties
Material: Closed cell rigid foam
Density: 100kg/m3
Thermal Conductivity: 0.037 W/mK
Compression Strength: 1128 kPa @ 10% deflection(internal) 1263 kPa @ 25% deflection
Ozone Resistance: Excellent
UV Resistance: Excellent
Water absorption by volume: < 1% v/v
Resistance to fungi (foil faced): Good(ASTM G21)
Leachable Chlorides: < 12 ppm (< 0.0012% w/w)(ASTM C871)