hot and cold water - always under pressure

2
VHG2-11021D VHG2-15021D VHG3-11021D VHG3-20021A VHG3-70021D MODEL VHG2-11025D VHG2-15025D VHG3-11025D VHG3-20025A VHG3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (19.5) 2.5 (9.5) 2.3 (8.7) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48) OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)* B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000 BURNER TYPE Natural Draft FUEL TYPE Natural Gas BURNER ASSEMBLY Ring Type with Aspirating Spud, 120V Control STACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) COIL Schedule 40 Schedule 40 Schedule 40 Schedule 40 Schedule 40 PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive PUMP MOTOR HP 1.5 2 1.5 5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1ph Total Amperage 15 17 15 20 15 CORD & PLUG 4' w/ GFCI & 15-amp Plug 4' w/ GFCI & 20-amp Plug 4' w/ GFCI & 15-amp Plug 4' w/ GFCI, No Plug 4' w/ GFCI & 15-amp Plug HOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination Hose GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLE Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm) NET WEIGHT Lbs (Kg) 319 (145) 325 (147) 319 (145 325 (147) 319 (145) SHIPPING WEIGHT Lbs (Kg) 375 (170) 365 (166) 365 (166) 390 (177) 380 (172) Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures due to variances allowed by manufacturers of our machine components. We attempt to keep our machine performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C) VHP2-11021D VHP2-15021D VHP3-11021D VHP3-20021A VHP3-70021D MODEL VHP2-11025D VHP2-15025D VHP3-11025D VHP3-20025A VHP3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (9.5) 2.5 (9.5) 2.3 (8.7) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48) OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)* B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000 BURNER TYPE Natural Draft FUEL TYPE Liquid Propane Gas (Vapor Only) BURNER ASSEMBLY Ring Type with Aspirating Spud, 120V Control STACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) COIL Schedule 80 Schedule 80 Schedule 80 Schedule 80 Schedule 80 PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive PUMP MOTOR HP 1.5 2 2 5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1ph Total Amperage 15 17 20 20 15 CORD & PLUG 36' w/ GFCI & 15-amp Plug 36' w/ GFCI & 20-amp Plug 36' w/ GFCI & 15-amp Plug 36' w/ GFCI, No Plug 36' w/ GFCI & 15-amp Plug HOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination Hose GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLE Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm) MACHINE WEIGHT Lbs (Kg) 315 (143) 321 (146) 315 (143) 344 (156) 318 (144) SHIPPING WEIGHT Lbs (Kg) 385 (175) 375 (170) 375 (170) 403 (183) 393 (178) VHW2-11021D VHW2-15021D VHW3-11021D VHW4-20021A VHW3-70021D MODEL VHW2-11025D VHW2-15025D VHW3-11025D VHW4-20025A VHW4-30025A/B/C VHW3-70025D DISCHARGE GPM (LPM) 2.0 (7.6) 1.9 (7.2) 3.0 (11.3) 3.5 (13.2) 3.5 (13.2) 2.7 (10.2) OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 3000 (207) 700 (48) OPERATING TEMPERATURE Ambient to 200°F (93°C)*, Maximum Temperature Rise of 140°F (78°C) 275°F (135°C) Max* B.T.U. PER HOUR 168,000 147,000 230,000 315,000 315,000 235,200 BURNER Oil Fired, Automatic Light, 120V 1ph FUEL TANK CAPACITY Gal (Liters) 6 (22.7) FUEL CONSUMPTION GPH (LPH) 1.20 (4.54) 1.05 (3.97) 1.60 (6.05) 2.25 (8.52) 2.25 (8.52) 1.68 (6.36) COIL Schedule 80 PUMP Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Direct-Drive Tri-Plunger Belt-Drive PUMP MOTOR HP 1.5 2 2 5 7.5 1.5 Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 230V 1ph / 230V 3ph / 460V 3ph 120V 1ph Total Amperage 18 20 20 20 36 / 27.5 / 14 18 CORD & PLUG 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, No Plug 36', No Plug 36' w/ GFCI, 20-amp Plug HOSE 3/8" I.D. x 50', 3000 PSI, Insulated Wire Braid 50' Steam Combination GUN & WAND Insulated Shut-Off Gun with Variable Pressure Wand NOZZLES Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance PAINT Epoxy Powder Coating LENGTH/WIDTH/HEIGHT 36" x 26" x 41" 42" x 26" x 41" 36" x 26" x 41" (91cm x 66cm x 104cm) (107cm x 66cm x 104cm) (91cm x 66cm x 104cm) MACHINE WEIGHT Lbs (Kg) 341 (155) 351 (159) 341 (155) 372 (169) 450 (204) / 425 (193) / 425 (193) 343 (156) SHIPPING WEIGHT Lbs (Kg) 410 (186) 390 (176) 390 (176) 440 (200) 565 (256) / 540(245) / 540(245) 395 (179) PRESSURE WASHERS G O L D S E R I E S ® HOT WATER • GASOLINE OR ELECTRIC POWERED • VERTICAL COIL 5-YEAR LIMITED WARRANTY CERTIFIED TO UL SAFETY STANDARDS ISO-9001 COMPANY MVP VHW, VHP and VHG MVP3-30321 MVP4-25321 MVP4-30321 MVP4-30321E MVP4-35321E MODEL MVP3-30325 MVP4-25325 MVP4-30325 MVP4-30325E MVP4-35325E DISCHARGE GPM (LPM) 3.0 (11.3) 3.2 (12.1) 3.5 (13.2) 3.5 (13.2) 3.8 (14.4) OPERATING PRESSURE PSI (Bar) Variable to 3000 (207) Variable to 2500 (172) Variable to 3000 (207) Variable to 3000 (207) Variable to 3500 (241) OPERATING TEMPERATURE Ambient to 190°F (88°C)*, Maximum Temperature Rise of 130°F (72°C) BTU PER HOUR 266,000 310,000 336,000 336,000 336,000 BURNER Oil Fired, Automatic Light, 12V DC COIL 1/2" Schedule 80 FUEL TYPE Kerosene, Stove Oil, Diesel FUEL OIL TANK CAPACITY Gal (Liters) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7) FUEL OIL NOZZLE GPH (LPH) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) PUMP Tri-Plunger Direct-Drive ENGINE 9 HP Honda/Recoil Start 9 HP Honda/Recoil Start 11 HP Honda/Recoil Start 11 HP Honda/Electric Start 13 HP Honda/Electric Start Charging System 18 Amps 18 Amps 18 Amps 18 Amps 18 Amps GASOLINE TANK CAPACITY Gal (Liters) 1.6 (6.1) 1.6 (6.1) 1.7 (6.4) 1.7 (6.4) 1.7 (6.4) HOSE 50' x 3/8"ID 3000 PSI Wire Braid 50' x 3/8"ID 4000 PSI SHUTOFF GUN & WAND Variable Pressure Wand SS VP Wand NOZZLES Hardened Stainless Steel (15°) and Brass (Soap) CHEMICAL CONTROL Downstream Chemical Injection WHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide Stance LENGTH/WIDTH/HEIGHT 47" x 26" x 45" (119cm x 66cm x 114cm) MACHINE WEIGHT Lbs (Kg) 390 (177) 390 (177) 400 (181) 400 (181) 400 (181) SHIPPING WEIGHT Lbs (Kg) 480 (218) 480 (218) 490 (223) 490 (223) 490 (223) Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures due to variances allowed by manufacturers of our machine components. We attempt to keep our machines performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for any permits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C) FORM #96-003 • 1/2000 • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA DISTRIBUTED BY: WATER CLEANING SYSTEMS ® CLEANING EQUIPMENT TRADE ASSOCIATION MEMBER OF Made in USA REGISTERED www.landa-inc.com World Headquarters SINCE 1969 • CELEBRATING OVER 30 YEARS OF EXCELLENCE VHW SPECIFICATIONS MVP SPECIFICATIONS VHP SPECIFICATIONS VHG SPECIFICATIONS VHW4-20021A MVP4-30321E (Shown with optional stainless steel wrap) PG: The workhorse of cold- water pressure washers PHW: The iron- tough hot-water washer SGHW: Heavy-duty hot- water cleaning muscle SJ Top Load: Parts washer with water-propelled spray bar SJ Front Load: Aqueous parts washer for large parts Water Jet: Hot/cold water rotary surface cleaner SandBlaster: Dust-free cleaning of metal, concrete Swivel Hose Reels: For tangle-free handling Rotary Nozzles: For extra cleaning power Chemicals: Full line of enviro-safe detergents HOT AND COLD WATER PRESSURE WASHERS AUTOMATIC AQUEOUS PARTS WASHERS ACCESSORIES AND PARTS SOLUTIONS OTHER EQUIPMENT FROM LANDA ACCESSORIES FOR PRESSURE WASHERS

Upload: others

Post on 22-Nov-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

VHG2-11021D VHG2-15021D VHG3-11021D VHG3-20021A VHG3-70021DMODEL VHG2-11025D VHG2-15025D VHG3-11025D VHG3-20025A VHG3-70025DDISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (19.5) 2.5 (9.5) 2.3 (8.7)OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48)OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)*B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000BURNER TYPE Natural DraftFUEL TYPE Natural GasBURNER ASSEMBLY Ring Type with Aspirating Spud, 120V ControlSTACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm)COIL Schedule 40 Schedule 40 Schedule 40 Schedule 40 Schedule 40PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-DrivePUMP MOTOR HP 1.5 2 1.5 5 1.5

Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1phTotal Amperage 15 17 15 20 15

CORD & PLUG 4' w/ GFCI & 15-amp Plug 4' w/ GFCI & 20-amp Plug 4' w/ GFCI & 15-amp Plug 4' w/ GFCI, No Plug 4' w/ GFCI & 15-amp PlugHOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination HoseGUN & WAND Insulated Shut-Off Gun with Variable Pressure WandNOZZLE Hardened Stainless Steel (15°) and Brass (Soap)CHEMICAL CONTROL Downstream Chemical InjectionPAINT Epoxy Powder CoatingLENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm)NET WEIGHT Lbs (Kg) 319 (145) 325 (147) 319 (145 325 (147) 319 (145)SHIPPING WEIGHT Lbs (Kg) 375 (170) 365 (166) 365 (166) 390 (177) 380 (172)Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressuresdue to variances allowed by manufacturers of our machine components. We attempt to keep our machine performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for anypermits, compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C)

VHP2-11021D VHP2-15021D VHP3-11021D VHP3-20021A VHP3-70021DMODEL VHP2-11025D VHP2-15025D VHP3-11025D VHP3-20025A VHP3-70025DDISCHARGE GPM (LPM) 2.0 (7.6) 1.8 (6.8) 2.5 (9.5) 2.5 (9.5) 2.3 (8.7)OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 700 (48)OPERATING TEMPERATURE Ambient to 180°F (82°C)*, Maximum Temperature Rise of 120° (67°C) Ambient to 275°F (135°C)*B.T.U. PER HOUR 168,000 140,000 245,000 245,000 245,000BURNER TYPE Natural DraftFUEL TYPE Liquid Propane Gas (Vapor Only)BURNER ASSEMBLY Ring Type with Aspirating Spud, 120V ControlSTACK SIZE 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm) 8" (20cm)COIL Schedule 80 Schedule 80 Schedule 80 Schedule 80 Schedule 80PUMP Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-Drive Tri-Plunger, Belt-DrivePUMP MOTOR HP 1.5 2 2 5 1.5

Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 120V 1phTotal Amperage 15 17 20 20 15

CORD & PLUG 36' w/ GFCI & 15-amp Plug 36' w/ GFCI & 20-amp Plug 36' w/ GFCI & 15-amp Plug 36' w/ GFCI, No Plug 36' w/ GFCI & 15-amp PlugHOSE 50' x 3/8" I.D. 3000 psi Insulated Wire Braid Steam Combination HoseGUN & WAND Insulated Shut-Off Gun with Variable Pressure WandNOZZLE Hardened Stainless Steel (15°) and Brass (Soap)CHEMICAL CONTROL Downstream Chemical InjectionWHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide StancePAINT Epoxy Powder CoatingLENGTH/WIDTH/HEIGHT 50" x 26" x 41" (127cm x 66cm x 104cm)MACHINE WEIGHT Lbs (Kg) 315 (143) 321 (146) 315 (143) 344 (156) 318 (144)SHIPPING WEIGHT Lbs (Kg) 385 (175) 375 (170) 375 (170) 403 (183) 393 (178)

VHW2-11021D VHW2-15021D VHW3-11021D VHW4-20021A VHW3-70021DMODEL VHW2-11025D VHW2-15025D VHW3-11025D VHW4-20025A VHW4-30025A/B/C VHW3-70025DDISCHARGE GPM (LPM) 2.0 (7.6) 1.9 (7.2) 3.0 (11.3) 3.5 (13.2) 3.5 (13.2) 2.7 (10.2)OPERATING PRESSURE PSI (Bar) 1000 (69) 1500 (103) 1000 (69) 2000 (138) 3000 (207) 700 (48)OPERATING TEMPERATURE Ambient to 200°F (93°C)*, Maximum Temperature Rise of 140°F (78°C) 275°F (135°C) Max*B.T.U. PER HOUR 168,000 147,000 230,000 315,000 315,000 235,200BURNER Oil Fired, Automatic Light, 120V 1phFUEL TANK CAPACITY Gal (Liters) 6 (22.7)FUEL CONSUMPTION GPH (LPH) 1.20 (4.54) 1.05 (3.97) 1.60 (6.05) 2.25 (8.52) 2.25 (8.52) 1.68 (6.36)COIL Schedule 80PUMP Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Belt-Drive Tri-Plunger Direct-Drive Tri-Plunger Belt-DrivePUMP MOTOR HP 1.5 2 2 5 7.5 1.5Volts/Phase 120V 1ph 120V 1ph 120V 1ph 230V 1ph 230V 1ph / 230V 3ph / 460V 3ph 120V 1phTotal Amperage 18 20 20 20 36 / 27.5 / 14 18

CORD & PLUG 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, 20-amp Plug 36' w/ GFCI, No Plug 36', No Plug 36' w/ GFCI, 20-amp PlugHOSE 3/8" I.D. x 50', 3000 PSI, Insulated Wire Braid 50' Steam CombinationGUN & WAND Insulated Shut-Off Gun with Variable Pressure WandNOZZLES Hardened Stainless Steel (15°) and Brass (Soap)CHEMICAL CONTROL Downstream Chemical InjectionWHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide StancePAINT Epoxy Powder CoatingLENGTH/WIDTH/HEIGHT 36" x 26" x 41" 42" x 26" x 41" 36" x 26" x 41"

(91cm x 66cm x 104cm) (107cm x 66cm x 104cm) (91cm x 66cm x 104cm)MACHINE WEIGHT Lbs (Kg) 341 (155) 351 (159) 341 (155) 372 (169) 450 (204) / 425 (193) / 425 (193) 343 (156)SHIPPING WEIGHT Lbs (Kg) 410 (186) 390 (176) 390 (176) 440 (200) 565 (256) / 540(245) / 540(245) 395 (179)

P R E S S U R E WA S H E R SG O L D S E R I E S

®

HOT WATER • GASOLINE OR ELECTRIC POWERED • VERTICAL COIL

5-YEAR LIMITED WARRANTY • CERTIFIED TO UL SAFETY STANDARDS • ISO-9001 COMPANY

MVPVHW, VHP and VHG

MVP3-30321 MVP4-25321 MVP4-30321 MVP4-30321E MVP4-35321EMODEL MVP3-30325 MVP4-25325 MVP4-30325 MVP4-30325E MVP4-35325EDISCHARGE GPM (LPM) 3.0 (11.3) 3.2 (12.1) 3.5 (13.2) 3.5 (13.2) 3.8 (14.4)OPERATING PRESSURE PSI (Bar) Variable to 3000 (207) Variable to 2500 (172) Variable to 3000 (207) Variable to 3000 (207) Variable to 3500 (241)OPERATING TEMPERATURE Ambient to 190°F (88°C)*, Maximum Temperature Rise of 130°F (72°C)BTU PER HOUR 266,000 310,000 336,000 336,000 336,000BURNER Oil Fired, Automatic Light, 12V DCCOIL 1/2" Schedule 80FUEL TYPE Kerosene, Stove Oil, DieselFUEL OIL TANK CAPACITY Gal (Liters) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7) 6 (22.7)FUEL OIL NOZZLE GPH (LPH) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6) 1.75 (6.6)PUMP Tri-Plunger Direct-DriveENGINE 9 HP Honda/Recoil Start 9 HP Honda/Recoil Start 11 HP Honda/Recoil Start 11 HP Honda/Electric Start 13 HP Honda/Electric Start

Charging System 18 Amps 18 Amps 18 Amps 18 Amps 18 AmpsGASOLINE TANK CAPACITY Gal (Liters) 1.6 (6.1) 1.6 (6.1) 1.7 (6.4) 1.7 (6.4) 1.7 (6.4)HOSE 50' x 3/8"ID 3000 PSI Wire Braid 50' x 3/8"ID 4000 PSISHUTOFF GUN & WAND Variable Pressure Wand SS VP WandNOZZLES Hardened Stainless Steel (15°) and Brass (Soap)CHEMICAL CONTROL Downstream Chemical InjectionWHEELS 2 Ply Tubed Pneumatic 10" x 4.00" Wide StanceLENGTH/WIDTH/HEIGHT 47" x 26" x 45" (119cm x 66cm x 114cm)MACHINE WEIGHT Lbs (Kg) 390 (177) 390 (177) 400 (181) 400 (181) 400 (181)SHIPPING WEIGHT Lbs (Kg) 480 (218) 480 (218) 490 (223) 490 (223) 490 (223)

Note: We are constantly improving and updating our products. Consequently, pictures, features and specifications in this brochure may differ slightly from current models. There may be slight variances in gallonage and pressures dueto variances allowed by manufacturers of our machine components. We attempt to keep our machines performance ±5% of listed specifications. This equipment intended for outdoor use only. Customer is responsible for any permits,compliance with codes, or other government requirements associated with the installation, use, or disposal of waste associated with this equipment. *When incoming water temperature is 60° (16°C)

FORM #96-003 • 1/2000 • LANDA, INC. • 4275 Pacific Rim Blvd., Camas, Washington 98607 USA

DISTRIBUTED BY:

WATER CLEANING SYSTEMS

®

CLEANING EQUIPMENT TRADE ASSOCIATION

MEMBER OF Made in USA

REGISTERED

www.landa-inc.comWorld Headquarters

SINCE 1969 • CELEBRATING OVER 30 YEARS OF EXCELLENCE

VHW SPECIFICATIONS MVP SPECIFICATIONS

VHP SPECIFICATIONS

VHG SPECIFICATIONS

VHW4-20021A

MVP4-30321E (Shown with optional stainless steel wrap)

PG: The workhorse of cold-water pressure washers

PHW: The iron-tough hot-water washer

SGHW: Heavy-duty hot-water cleaning muscle

SJ Top Load: Parts washerwith water-propelled spray bar

SJ Front Load: Aqueousparts washer for large parts

Water Jet: Hot/cold waterrotary surface cleaner

SandBlaster: Dust-freecleaning of metal, concrete

Swivel Hose Reels: Fortangle-free handling

Rotary Nozzles: Forextra cleaning power

Chemicals: Full line ofenviro-safe detergents

HOT AND COLD WATERPRESSURE WASHERS

AUTOMATIC AQUEOUSPARTS WASHERS

ACCESSORIESAND PARTS

SOLUTIONS OTHER EQUIPMENT FROM LANDA

ACCESSORIES FOR PRESSURE WASHERS

Quick Coil Access: Unique lift-outdesign allows easy access to the coil withoutremoving the wrap or burner.

Handle: For easy maneuvering ofpressure washer. Optional Roll Cage.

Insulated, Spring-LoadedTrigger Spray Gun: For safe con-trol of high pressure spray and conve-nience of remote operation.

Swivel SwedgeFitting: For twist-free

maneuvering of hoseand trigger gun.

24" Safety HoseGuard: Gives

strain relief to hose con-nection and divertsspray away from opera-

tor in the event ofhose failure.

High-Pressure Hose: 50 ft.of steel wire braid hose rated for

up to 3000 psi (3-70021D mod-els have steam-combo hose).

Remote ChemicalInjection: Allows for intro-

duction of chemicals in low-pressureapplication.

Brass and Steel FittingsThroughout: JIC fittings are easyto service, prevent corrosion, and arerated for high pressure (not visible).

• Same features as VHW• Portable• Gas regulator, LP valve shut off• Direct spark piezo ignitor• 10 ft. of gas hose and tank carrier with snug-fit

metal band (tank not included)• For use with vapor type propane only

VHP: PROPANE GAS-HEATED

• Same features as VHW• Stationary• Gas valve shut off• Direct spark piezo ignitor• Painted steel base with forklift guides and

additional height for gas burner• 10 models

VHG: NATURAL GAS-HEATED

Tri-Plunger Pump: Belt-driven (except4-30025), oil-bath with forged brass head.Five year limited warranty on pump, life-time warranty on pump head (not visible).

Thermal Pump Protector: Preventspump overheating in by-pass mode (not visible).

Pressure Trapping Unloader: No pres-sure in pump or load on motor when triggeringgun for longer pump and motor life (not visible).

Inlet Filter: Screen mesh prevents debrisfrom entering and damaging pump (not visible).

DuraCoil: Steel inner wrap with cold-rolled coil for a long life of efficient,leak-free operation. Coil is warrantedfor 5 years.

Protective Cover: Powder coatpaint provides added weather-resis-tant protection (optional brushed stain-less steel cover and coil wrap available).

Quick-Couple Nozzles: Easyto attach and detach.

Electrical Switch: Industrial,3-position on/off switch for long life.

Steam Combination: Adjustableunloader valve for converting hotwater to wet steam (3-70021D only).

Tri-Lingual Labels: Operatinginstructions in English, Spanish andFrench.

Motor with Overload Protection:Industrial-strength motor with thermalprotection (not visible).

Elevated Fuel Line: Fuel line ispositioned above the tank bottom tokeep dirt and debris from plugging thefuel line (VHW only).

GFCI: 36-foothigh-grade electricalcord with ground-fault circuit inter-rupter for operatorsafety (on all 1-phasemodels less than 30amps).

Rupture Disk: Attached to dischargeside of heating coil to protect against excessivepressure buildup (not visible).

Flow-Activated Solenoid Valve: Shutsoff fuel to burner when water flow is inter-rupted from gun operation (not visible).

®

Certified to UL-1776Standards

Rupture Disk: Attached to dis-charge side of heating coil to protectagainst excessive pressure buildup (notvisible).

Insulated, Spring-LoadedTrigger Spray Gun: For safe con-trol of high pressure spray and conve-nience of remote operation.

Swivel Swedge Fitting: Fortwist-free maneuvering of hoseand trigger gun.

24" Safety HoseGuard: Gives strain relief tohose connection and divertsspray away from operator inthe event of hose failure.

Variable PressureWand: Easy-to-adjust,

insulated, dual-lancewand makes it easy toswitch between washand rinse modes aswell as controlchemical flow at thewand.

Battery Box:Durablepolyurethane boxwith vibration isola-tors firmly securesbattery (electric-start

models only).

Quick-CoupleNozzles: Easy to

attach and detach.

Tri-Lingual Labels:Operating instructions in

English Spanish and French.

High-Pressure Hose: 50ft. of steel wire braid hose rated for upto 3000 or 4000 psi depending on model.

Remote Chemical Injection:Allows for introduction of cleaningchemicals in low-pressure applica-tion.

Burner Control Panel: On-Off rocker switch with hour meter formaintenance scheduling.

Burner: High-efficiency, low main-tenance 12V DC burner, providesyears of reliable operation (not visible).

Brass and Steel Fittings Throughout:JIC fittings are easy to service, prevent corro-sion, and are rated for high pressure.

Full Roll Cage: Rugged steel roll cage pro-vides additional protection to the componentsas well as a lifting beam and push handles atboth the front and rear.

Hose and Wand Holders: Convenientlypositioned for transporting hose and wand.

Pressure TrappingUnloader: Nopressure inpump orload onmotor whentrigger gunnot in use forlonger pump andmotor life (not visible).

Battery-LessPull Start:Eliminates the needfor a battery on allpull start models.

Inlet Filter: Screenmesh prevents debrisfrom entering and damag-ing pump.

Tri-Plunger Pump: Oil-bath with forged brass head.Five year limited warranty onpump, lifetime warranty on pumphead.

Oil Drain: For convenience indraining the engine oil and easier ser-vice and maintenance.

Rugged Engine: Industrial-grade 9, 11 or 13 hp, Honda engine withoverhead valves; four models come stan-dard with 18 amp charging system.

Thermal Pump Protector: Preventspump overheating in by-pass mode (not visible).

Elevated Fuel Line: Fuel line ispositioned above the tank floor to keep dirt anddebris from plugging the fuel line.

Flow-Activated Solenoid Valve: Shutsoff fuel to burner when water flow is interrupt-ed from gun operation (not visible).

Man

ufac

ture

dTo

Cle

anin

g

Equipment Trade AssociationPerform

ance

Standards

Cleaning Equipment Trade Association

PerformanceCertified

TM Made in USA

DuraCoil: Steel inner wrap withcold-rolled coil for a long life ofleak-free operation. Coil is fullywarranted for 5 years.

Quick Coil Access: Uniquelift-out design allows easy accessto the coil without removing thewrap or burner.

Hose and WandHolders: Convenientlypositioned for transport-ing hose and wand.

VariablePressureWand: Easy-to-adjust insulateddual-lance wandmakes it easy toswitch betweenwash and rinsemodes.

ELECTRIC-POWEREDHOT-WATER WASHERS

Pneumatic Tires: 2-ply air-filled, all terrain tires with tubesmake for easy maneuvering.

Rugged Chassis: Made of 12-gauge steel withwelded seams for added durability and protectedagainst rust with weather resistant powder coat paint.

®

Certified to UL-1776Standards

Man

ufac

ture

dTo

Cle

anin

g

Equipment Trade AssociationPerform

ance

Standards

Cleaning Equipment Trade Association

PerformanceCertified

TM

Made in USA

Pneumatic Tires:2-ply air-filled, all terraintires with tubes make foreasy maneuvering (does notapply for stationary VHG).

Burner: High-efficiencyburner, with top-qualitytransformer providesyears of reliable operation(not visible).

NEW!NEW!All Electric-Powered

Models Have Belt-Drive

Pumpsexcept

VHW4-30025

High-Temperature Shutdown:Shuts down washer if temperaturebecomes excessive (not visible).

MVP GASOLINE-POWERED, DIESEL-OIL-KEROSENE HEATEDDiscover the Many Reasons LANDA is the Only Pressure Washer Built to Last! VHW ELECTRIC-POWERED, DIESEL-OIL-KEROSENE HEATED

Discover the Many Reasons LANDA is the Only Pressure Washer Built to Last!VHPVHG