hoja de presentación priostatic ingles - artec tecnicas/p… · hoja de presentación...
TRANSCRIPT
Controls electrostatic discharge
Abrasion and impact resistance
Resistant to most chemicals used in the electronics industry
Resistant to fire does not support combustion
Easy to clean
(ESD)
,
Multi-layer epoxy system, 100% solids.
Designed to meet the electrostatic conductive/dissipative requirements of a wide variety of industrial flooring needs.
Complementary Products
: Priostatic Primer
SYS
TEM
Priostatic Black Coat CN or DSPriostatic Top Coat
Ground connection
Substrate
Black Coat
Primer
Top Coat
PRIOSTATIC 80 STATIC PROTECTIVE SYSTEM(Formerly known as SPS)
Legend: E= Excellent G= Good F= Fair P= Poor
USES:
• Electronic Industries.
• Areas where a static protection is required.
Chemical Resistance
PRODUCT WARRANTY:
Pricoat products have a quality warranty that stipulates that its production and its raw material are free of defects with the commitment to credit the amount of the purchase or material recovery to the client in case of fault or defect. The material installer has to assume the installation warranty.
Colors
Physical Properties (Dry Film)
Medium Gray GraySoft GrayLight
Oyster White Ice BlueElectric Blue
Beige
.
• Colors are close approximations. For greater precision please contact a Pricoat representative for samples.•• White and Light Gray tend to turn yellow with the passage of time.
Day 1 Day 7
Property ResultsHardness, Shore D (ASTM D-2240) 50-80
Compressive strength (ASTM D-695) 6,000 psi
Tensile strength (ASTM F-638) 2,000 psi
Flexural strength (ASTM D-790) 2,350 psi
Ultimate elongation 3.5%
Coefficient of friction slip 0 .507
Inflammability (ASTM D-635) Self-extinguishing
Abrasion resistance, mg CS-17, 1000 ciclos, 1000 gr (ASTM D4060) 80Electrical surface resistance, 100V ESD STM 7.1-2001
Conductive:2.5x10 -1x10 ÙDissipative:1x10 -1x10 Ù
4 6
6 9
Application Characteristics
ThicknessMil
75
95
105
125
ft /gal.2
2.0
1.5
1.4
1.1
Coveragem /gal.
2
21
16
15
12
Packaging
Top Coat
Part B(Gal)
Kit (Gals.)
2 5
3
10
13
15
Part C(pounds)
Part A(Gal)
Black Coat Primer
1
10
0.5
65
5
5.5 11
1
3 15
1
4 20
5
N/A N/A N/A N/A
Pricoat Trademark in process.Presentation HPI0709-13
®
Note: Antistatic coatings have a tendency to attract the relative humidity, present in the air, to the polymer surface, improving its surface electrical conductivity. Is
5 6probably to obtain conductive measurements, from 10 to 10 , in systems 6 9formulated as electrostatic dissipative (10 – 10 ).
Ph. 52 (614) 481-4344 [email protected]
Nicolás Gogol #11343 Complejo Industrial Chihuahua Chihuahua, Chih., Méx. ZC 31109
Inorganic Acids 10% Hydrochloric acid E E30% Hydrochloric acid E G10% Nitric acid E G50% Phosphoric acid F P37% Sulfuric acid G G
Organic acids 10% Acetic acid G F10% Acido cítrico G GOleic acid G F
Alkaline 10% Ammonium hydroxide E E50% Sodium hydroxide E E
Solvents (alcohols) Ethylene glycol antifreeze( ) E GIsopropyl alcohol F FMethanol F F
Solvents (aliphatic) d- Limonene G GJet JP 4 E EGasoline G GMineral spirits E E
Solvents (aromatics) Xylene F F
Solvents (chlorinated) Methylene chloride P P
Solvents (ketones & esters)
Methyl ethyl ketone (MEK) P PPropylene glicol methyl ether acetate (PMA) F F
Miscellaneous chemical
20% Ammonium nitrate E EBrake fluids F FBleach G GMotor oil (SAE30) E ESkydrol 500 B F FSkydrol Ld4 F F20% Sodium chloride E E1% Tide laundry soap E E10% Trisodium phosphate E E