hoists - certex · harrington hoists, inc. peerless cf hand chain hoist 11-4 11. ... • heavy duty...

3 Ton Optional Anchor Sling

• Tough aluminum alloy construction for strength and durability• Hoistaloy® hardened steel link type load chain provides strength, long wear life

and flexibility • Compact, lightweight, simplified construction for ease of use and service• Weatherized, automatic friction brake for positive load control• Easy operating — with one hand control• Forged steel upper and lower hooks, hardened for strength and durability• Hook latches are standard

Optional Load Limiter Protection Device: Load Limiter assures protection in overload conditions. When dangerous over-loads are applied to the tool by the application of excessive lever force, the Load Limiter stops additional transmission of lever forces to the tool. You may order Load Limiter as part of your new CM Puller or in a kit for easy installation on tools now in use.

Optional Anchor Sling®:Anchor Sling is an upper hook extender that simplifies attachment when applica-tion or space limitation makes it impossible to pull in a straight line from hook to hook. Swiveling anchor block is securely fixed to the tool housing and the upper hook swivels through a full 360° rotation. Anchor Sling may be ordered as an option or in kit form for simple installation on models already in use.

Optional Load Sentry®:Load Sentry assures positive warning of overload condition. When dangerous overloads are applied to the operating lever, the plastic covered hand grip gradu-ally deflects to warn of the danger involved. You may order Load Sentry as part of your new CM Puller or in a kit for easy installation on tools now in use.

3/4 Ton Optional Load Sentry

Specifications

CERTEXCat. Ref. No.

ColumbusMcKinnon

Code

Max.Capacity

(Tons)

Standard Lift(Ft.)

Pull on Lever to Lift Full Load

(Lbs.)

Approx. Weight (Lbs.)

Min. Distance Between Hooks

(In.)

Lever Length

(In.)

Hook Throat Openings

(In.)

HOISTSColumbus McKinnon Corporation

Puller

11-1

11

11-2

11


The Cyclone is a high speed, spur geared hoist that delivers maximum efficiency and requires minimum maintenance. Corrosion-resistant aluminum alloy frame construction is lightweight, yet rugged. CM Hoistaloy® load chain-equipped for flexibility, strength and durability. Low headroom and compact design make it easy to install. The hoist is equipped as standard with Load Limiter for automatic overload protection.When the hoist is excessively overloaded, Load Limiter stops the lift.The Cyclone has a fully enclosed brake requiring no lubrication. Neither extremes of temperature nor frequent stops will affect its positive load control. Latch type hooks are standard on all capaci-ties. Latchlok® hook available as optional equipment. Exclusive Lifetime guarantee.

SPECIFICATIONS

Standard hand chain drop reaches to a point 2 feet above lower hook when in its lowest position.

Army Type Trolley HoistsThis compact trolley hoist features reduced headroom, side clearances and end approach which make it ideal for operation in tight spaces. Integral trolley has hardened universal tread flanged track wheels which minimize rolling friction. CM’s Internal Load Limiter™ automatically guards against damaging overloads without increasing overall dimension. Capacities range from 1/4 thru 12 tons — plain or geared trolley. Adapts to a wide range of beam adjustments.

SPECIFICATIONS

Standard Strands

American Standard Shape Adjustment

Ranges†

Chain PullTo Lift FullCapacity

Chain OverhauledTo Lift Load Minimum

MinimumRadius

Capacity(Ton)

Lift (Ft.)

of Chain

Depth (In.)

Flange Width (In.)

Load (Lbs.)

One Foot (Ft.)

Headroom (In.)

Curve (In.)

ColumbusMcKinnon

Plain Trolley

ColumbusMcKinnon

Geared Trolley

CERTEXCat. Ref. No.

CERTEXCat. Ref. No.

* 1/4 thru 1 ton plain Trolley Hoist can be adapted to 4” & 5” depth—American Standard Shapes (2 5/8”-3” flange widths)—at no extra charge.† Specify exact beam size when ordering.

Hand Chain Hoists

Capacity(Ton)

CERTEXCat. Ref. No.

ColumbusMcKinnon

Code

Standard Lift(Ft.)

Strands of

Chain

Net Weight

(Lb.)

Shortest Distance Between Hooks

(In.)

Chain Overhauled to Lift Load One Foot

(Ft.)

Chain Pull to Lift

Full Load(Lb.)

Cyclone

Lodestar electric chain hoists offer power, flexibility and a number of import-ant safety features. All capacities are available in either single speed or two speed models. Heavy duty motors are rated at thirty minutes. Workings are completely enclosed and compact for low headroom. Safety features include Lodestar Protector®, a friction clutch assembly designed to stop the hoist when overloading occurs. A dual braking system — heavy duty magnetic and regen-erative, plus upper and lower adjustable limit switches are additional Lodestar safety features. Snap action control station, Rated NEMA 4, carries only 115 volts and is completely sealed and weatherproofed and waterproofed. Gears receive lifetime lubrication at factory. Famous CM Hoistaloy® load chain. Latchlok® hook available as optional equipment. Comes with a Lifetime war-ranty.1. When ordering use Product Code plus proper suspension code.2. Suspensions available in swivel hook, rigid hook, low headroom trolley and

motor driven trolley.


Electric Chain Hoists

11-3

11

CERTEXCat. Ref. No.

ColumbusMcKinnon115-1-60 10 Ft. Lift

CERTEXCat. Ref. No.

ColumbusMcKinnon

230/460-3-60 10 Ft. Lift

CERTEXCat. Ref. No.


CERTEXCat. Ref. No.


SPECIFICATIONS

HOIST SELECTION

Max.Cap.Tons

Strandsof

Chain

LiftingSpeed FPM

Single Speed Code Two Speed Code

LiftingSpeeds

FPMModel

NOTE: 15 and 20 foot lifts are also available as standard.

Harrington’s Model CF Series Hand Chain Hoist is a practical choice for efficient, trouble-free service. Rugged features include a die-cast aluminum body and high tensile heat treated main shaft, pinion and load gear. Special heat treated load chain, pre-lubricated sealed ball bearings, contribute to long service with low maintenance. All hoists are load tested and meet ANSI B30.16 & OSHA standards.

SPECIFICATIONS AND DIMENSIONS WITH 10 FT. OF LIFT

Capacity(ton)

CERTEXCat. Ref.

No.

HarringtonCodeModelCF4

Liftft.

HandChainPulllb.

OverHaulRatio

HeadRoom

cIn.

aIn.

gIn.

NetWt.lb.

Approx.Shipping

Wt.lb.

ChainFalls

Note: Length of hand chain equals lift less 18 inches.

HOISTSHarrington Hoists, Inc.

Peerless CF Hand Chain Hoist

11-4

11

HOISTS

11-5

11

Harrington Hoists, Inc.

LB Lever Hoist

3/4, 1, 11/2, 2, 2 3/4, 3, 6, and 9 Ton capacityThe LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair.

Many Benefits From More Features:• Rugged, all-steel construction that actually weighs

less than comparable aluminum models.

• Get positive braking action with Weston-style load brake incorporating two moisture-resistant brake pads with four braking surfaces. Includes two brake pawls for additional reliability.

• Enjoy protection against dirt and moisture with a totally enclosed brake mechanism.

• Ensure long life with machined, heat-treated, split load double reduction gears.

• Operate in close quarters with short steel handle and 15-degree recovery strokes.

• Patented spring-loaded freewheel mechanism permits easy adjustment of the load chain and safeguards against accidental freewheeling under load.

• Equipped with standard rubber grip for non-slip operation.

Options: • Load limit warning handle

• Top hook extender

• Point load hook

• Inspection hook

• Bullard® and Shur-Loc® hooks

Capabilities To Count On:• 5-foot lift is standard, 10-, 15- and 20-foot lifts also

stocked; nonstandard lifts available as well.

• Grade 100 heat-treated load chain is nickel plated for corrosion resistance.

• Forged and heat-treated alloy steel hooks open slowly without fracturing under excessive loads. Top and bottom hooks rotate 360.˚

• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity, in accordance with ASME B30.21 requirements.

HOISTS

11-6

11

Cap.(Tons)

CERTEXCat. Ref. No.

HarringtonCode

HeadroomC (in)

Std.Lift(ft)

Pull toLift

Load*(lbs)

a(in)

b(in)

D*(in)

e(in)

f(in)

g(in)

LoadChain

Diameter(mm) xChain

Fall Lines

NetWeight

(lbs)

ShippingWeightApprox.

(lbs)

Weight forAdditionalOne Foot

of Lift(lbs)

*Figures in parentheses are for hoists with the optional load limit warning handle.


Peerless LB Lever Hoist

Specifications

3⁄4 – 2 3⁄4 Ton 3 Ton

9 Ton6 Ton

HOISTS

11-7

11


LX Lever Puller

1/4 and 1/2 Ton capacityHarrington’s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and moving jobs in many applications including transportation, construction and plumbing. Available in two capacities to fit all applications. The 1⁄2 Ton capacity is unique to the industry.

Many Benefits From More Features:• Durable carbon steel body is compact

and lightweight.

• Very low headroom design for use in tight spaces.

• Free-chain mechanism allows for quick adjustments.

• Extremely low pulling force is required for operation.

• Weston-style brake is totally enclosed to protect against dirt, dust and rain.

• Single step reduction gear assures load holding performance.

• Load chain guide mechanism permits smooth and quiet guiding of chain.

• Rubber handle grip for ease of use.

• Effortless to transport, install and store.

Options: • Heavy duty carrying case

Capabilities To Count On:• Grade 100, nickel-plated load chain is corrosion

and wear resistant.

• Strong hook latches include safety tip.

• 5-foot lift is standard. Longer lifts are available in both capacities.

• Sold individually or in convenient multi-packs— 1⁄4 Ton in 6-packs and 1⁄2 Ton in 4-packs.

• Test certificate verifies that every hoist has been factory load tested to 125% of rated capacity in accordance with ASME B30.21 requirements.

1/2 Ton1/4 Ton

HOISTS

11-8

11

Cap.(Tons)

CERTEXCat. Ref. No.

HarringtonCode

HeadroomC (in)

Std.Lift(ft)

Pull toLift

Load(lbs)

a(in)

b(in)

D(in)

e(in)

g(in)

LoadChain

Diameter(mm) xChain

Fall Lines

NetWeight

(lbs)

ShippingWeightApprox.

(lbs)

Weight forAdditionalOne Foot

of Lift(lbs)

Weights are approximate.


LX Lever Puller

Specifications

11

The ER and NER Electric Chain Hoists can improve efficiency in the most severe work environments. Packed with the latest technology, quality components, and superior design character-istics, these hoists will satisfy the most demanding customers. The ER hoist offers a number of features as standard that are in compliance with codes and regulations for specific applica-tions. The NER is a high–quality, general purpose hoist. See the chart below for a detailed feature comparison.

Feature Comparisons (ER vs. NER)

*For 8 Ton and above Upper/Lower Switch is Standard.


Harrington ER and NER Electric Chain Hoists

ER NER

Feature Comparisons (ER vs. NER)

Feature

HOISTS

11-9

11-10

11


Harrington ER and NER Electric Chain Hoists

• Standard length of power supply cable is 15.́ For more information on power supply system, contact the Harrington distributor nearest you.

• Special lengths of load chain, push-button cord or power supply cables are available upon request.

• Harrington load chain is case-hardened Grade 80 chain.• Optional canvas chain containers are available. • Optional steel chain containers are available if lifting height exceeds limit of

canvas chain container.

Cap.(Tons)

CERTEXCat. Ref. No.

HarringtonProduct

CodeCERTEX

Cat. Ref. No.

HarringtonProduct

Code

StandardLift(Ft.)

Push ButtonCord 1

(Ft.)

LiftingSpeed

(Ft./Min.)Output

(Hp)@230V(208V) @460V

Load ChainDiameter

(mm)x

Chain FallLines

Net Weight (Lbs.)

Weight for Additional One Foot

of Lift(Lbs.)

Lifting Motor 3 Phase 60 Hz.Rated Current (amps)

ER/NER Specifications

HOISTS

HOISTS


11-11

11

Harrington SNER Electric Chain Hoists

Standard Features• 1/4 - 3 Ton capacities• 115/230-1-60 reconnectible power• Low headroom• Lightweight and easy maintenance• Pull-rotor motor brake• ASME H4 classification• NEMA 3R, IP55 rating

Top Quality Hoists• 60 minute severe duty rating (fan cooled)• Unique long life chain guide• Friction clutch prevents lifting of overloads• Single chain fall through 2 TonsApplications• Machine shops• Temporary job sites• Maintenance areas

Single Phase Power Reaches New Levels Of PerformanceHarrington’s SNER Series of electric chain hoists and SMR motorized trolleys offer expanded duty, low headroom and additional capacities for those many applications where only single-phase power is available. The standard features of the populart three-phase NER/MR Series are incorporated to provide the operator with top quality and high performance.

Cap.(Tons)

HarringtonProduct

Code

StandardLift(Ft.)

Push ButtonCord 1

(Ft.)

LiftingSpeed

(Ft./Min.)Output

(Hp) @115V @230V

Load ChainDiameter

(mm)x

Chain FallLines

Net Weight (Lbs.)

Weight for Additional One Foot

of Lift(Lbs.)

Lifting Motor 1 Phase 60 Hz.Rated Current (amps)

Cap.(Tons)

HarringtonProduct

Code

HeadroomC

(in)a

(in)b

(in)d

(in)e

(in)g

(in)h

(in)i

(in)

SNER Specifications

SNER Dimensions

11-12

11

Self-lubricating bearings

Nylon web strap

Pulley block double

reeved for full capacity

Forged steel latching hooks

Easily replaceable stress link gives

warning of overload

Aluminum alloy frame

Open constructionfor daily visual

inspection

Web strap stores on double flanged drum

Reversible fiberglass

handle

Interlockingpawl system

Hot stick ring(optional)

Hot stick operating

levers(optional)

Wind up wheel

Hot stick hook latch(optional)

Easily replaceable stress link

gives warning of overload

Engineered for reliable operation• Exclusive breakable stress link

- signals the operator of an over load condition by breaking before the fiberglass handle breaks and/or load-carrying part of the hoist is overloaded.

• Double flanged drum - prevents web strap from coming in contact with ratchet teeth.

• Forged Hooks - with latches.

Positive load holding in all environments

• Double interlocking pawl mechanism - No load brakes to slip or foul.

Ease of operation• Self-lubricating bearings -

throughout housing and on the pulley assure smooth operation.

• Open frame construction - for cleaning and visual inspection.

Useful cost-effective options• Five hook styles - designed to meet

your application requirements and work practice standards.

• Models equipped with hot stick levers, rings, and hot stick latches - for remote operation using approved hot line tools.

1 and 1 1/2 TON CAPACITY SMALL FRAME shown with optional hot stick rings and hot stick hook latches• Hot stick rings available • Choice of hook styles

TOTAL HOOK TO HOOK DISTANCE

TOTAL MAXIMUM PULLING DISTANCE

MODEL NUMBER HANDLELENGTH WEIGHT

1 TON CAPACITY2 LATCHING HOOKS2B HOT STICK RINGS & LATCHING HOOKS2U GATE TYPE HOOKS2UB GATE TYPE HOOKS and HOT STICK RINGS2HB HOT STICK RINGS & HOOK LATCHES

1 1/2 TON CAPACITY - SMALL FRAME2010920111 LATCHING HOOKS2010920109 HOT STICK RINGS & LATCHING HOOKS2010930118 GATE TYPE HOOKS2010930120 GATE TYPE HOOKS & HOT STICK RINGS2010930137 HOT STICK RINGS & HOOK LATCHES

1000/4551000/4551000/4551000/4551000/4551000/455

1500/6821500/6821500/6821500/6821500/682

2000/9092000/9092000/9092000/9092000/9092000/909

3000/13633000/13633000/13633000/13633000/1363

30''30''30''30''30''

10.25 lb.10.75 lb. 12.5 lb. 13 lb.11.25 lb.

20''20''20''20''20''

10.25 lb.10.25 lb. 12 lb. 12 lb.10.25 lb.

SINGLE LINECAPACITY

LB/METRIC�

DOUBLE LINE CAPACITY

LB/METRIC�

SINGLE LINEHOOK TO HOOK

DISTANCEMIN. MAX.

DOUBLE LINEHOOK TO HOOK

DISTANCEMIN. MAX.

TOTAL MAXIMUMPULLING DISTANCE

SINGLE DOUBLE

1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''1'-8'' 10'-9''

1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''1'-11'' 9'-1''

2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''2'-1'' 5'-4''

7'-2'' 3'-3'' 7'-2'' 3'-3''7'-2'' 3'-3''7'-2'' 3'-3''7'-2'' 3'-3''

2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''2'-3'' 6'-2''

9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''9'-1'' 3'-11''

†Metric capacities shown are exact equivalents of U.S Domestic Ratings.

Lug-All Web Strap Specifications

WINCH-HOISTSLug All

Web Strap

11-13

11

Self lubricating bearings

Reversible handle

bends on overload to protect

user and hoist

7 x 19 Highly flexible aircraft cable

360° Swiveling hook with latches for positive

load engagement

Interlocking Pawl System will not slip

Aluminum alloy frame - anodized on Marine models

Open constructionfor daily visual

inspection

Cable guide allows cable to move free-

ly within guide

All cable stores on drum

Crimped copper sleeve

Exclusive swaged

ball shank terminal

WINCH-HOISTSLug All

Cable Strap

Highest quality is designed from the beginning… industrial-quality products for all applications.

INNOVATIVE design • Aluminum alloy frame.• Exclusive drum anchor - swaged ball shank

terminal locks cable securely in drum and allows for full extension of cable. (Other brands use two set screws and 2-3 wraps of cable to hold cable to drum.)

• Cable end has hydraulically crimped copper sleeve.• Proprietary reversible handle - always a downward

pull, switches positions in seconds.• Self-storing aircraft cable. No chains are hanging in

the way or dragging on the ground. Much lighter than chain pullers.

• Optional marine-grade models - developed specifically for marine or other corrosive conditions, have anodized castings, stainless steel cables, and cadmium plated steel shafts.

• Drop forged steel hooks.

RELIABLE OPERATION• Factory tested to 125% of rated capacity.• At average of 20% to 50% overload, handles bend

to alert operator to stop immediately. • Reversible handle is designed to bend on severe

overload to protect the user and the hoist. Replace the handle not the winch-hoist. Call to order replacement handle.

• 6000 Model - the shear pin design on two-position telescoping handle warns of overload.

• Quick Release - will not function when the cable is under load.

• The handle can be removed to prevent tampering with the hoist or load.

• One year guarantee against defects in workmanship and/or materials.

These winch-hoists are intended for industrial use only and not for lifting or supporting human or animal cargo.

CAPACITY MODEL # CAPACITY HANDLE PULL LIFTING MIN. DISTANCE CAPACITY HANDLE PULL LIFTING MIN. DISTANCE CABLE CABLE TOTAL IN FOR FULL DISTANCE BETWEEN HOOKS IN FOR FULL DISTANCE BETWEEN HOOKS DIAMETER LENGTH WEIGHT LBS/METRIC LOADS (lbs.) LBS/METRIC LOADS (lbs.) (lbs.) 1/2 ton 1000-15* - - - - 1000/455 77 15' 16'' 3/16'' 16' 7 1/2 ton 115-R* - - - - 1000/455 77 15' 16'' 3/16'' 16' 7

3/4 ton 1500-25 1500/682 67 12-1/2' 21'' 750/341 65 25' 16'' 5/32'' 26' 8-1/2 3/4 ton 125-R 1500/682 67 12-1/2' 21'' 750/341 65 25' 16'' 5/32'' 26' 8-1/2

1-1/8 ton 2250-15 2250/1022 86 7-1/2' 21'' 1125/511 83 15' 16'' 3/16'' 16' 8-3/4 1-1/8 ton 215-R 2250/1022 86 7-1/2' 21'' 1125/511 83 15' 16'' 3/16'' 16' 8-3/4

1-1/8 ton 2250-20 2250/1022 86 10' 21'' 1125/511 83 20' 16'' 3/16'' 21' 9-1/4

1-1/2 ton 3000-10 3000/1363 100 5' 21'' 1500/682 97 10' 16'' 7/32'' 11'-6'' 9 1-1/2 ton 310-R 3000/1363 100 5' 21'' 1500/682 97 10' 16'' 7/32'' 11'-6'' 9

DOUBLE LINE CAPACITY SINGLE LINE CAPACITY

*without pulley block †Metric capacities shown are exact equivelents of U.S Domestic Ratings.

Lug-All Cable Strap Specifications

Small Frame - 1/2 to 1-1/2 ton capacityOPTIONS• Rapid Lowering - permits release four times faster. Look for “R” on chart after model number.• Cable Return Crank - attaches directly to drum shaft for slack cable take up.• Marine Grade - aluminum parts are anodized, steel shafts are cadmium plated. Stainless steel cables.

Add suffix “M” to model number.• Four hook options add to hoist flexibility.

11-14

11

Columbus McKinnon Corporation TROLLEYS

Adj. for American Standard Shapes Net

Depth (Inches)

Flange Width (Inches)

Weight (Pounds)

CERTEXCat. Ref.

No.

ColumbusMcKinnon

Code

TreadDiameter of

Wheels (Inches)

MaximumCapacity (Tons)

Depth (Inches)

Flange Width (Inches)

NetWeight

(Pounds)

MaximumCapacity(Tons)

CERTEXCat. Ref. No.

ColumbusMcKinnon

Code

TreadDiameterof Wheels(Inches)

Adj. for American Standard Shapes

Series 632 Ball Bearing TrolleyRevolutionary design advances make this trolley shorter, more compact and 50% lighter than conventional trolleys, yet it’s every bit as rugged. Exclusive Dial-Fit™ collars adapt to a wide range of Beams in minutes. No time consuming washer adjustment. And the Series 632 can negotiate radius curves as tight as 7 to 10 inches, depending on capacity. Includes hardened steel double-row ball bearing universal tread track-wheels.

SPECIFICATIONS

Series 633 Ball Bearing TrolleyVersatile, all-purpose trolley can be used with any hook suspended hoist. Hardened universal tread flanged track wheels are ball bearing equipped for easy rolling on American standard shapes, wide flange shapes, or patented rail. Rugged steel side plates are formed with trolley guards for added security and act as bum-pers. Adapts to a wide range of beam adjustments. Trolley includes a standard hook plate.

SPECIFICATIONS

WINCHES

11-15

11

Spur Gear Hand Winches — Single and Double ReductionIndustrial strength winches feature machine cut spur gears for accurate operation and long lasting service. Automatic brake models provide positive load control for lifting and lowering operations. Zinc and iridescent dichromate plated finish protects against corrosion. Bronze and ball bearings deliver smooth operation. Wire rope sold separate-ly.

Thern, Inc.

CERTEXCat. Ref. No.

ThernBaseModel

CERTEXCat. Ref. No.

ThernWith

BrakeLoad Rating

1st LayerLoad Rating

Full Drum

WireRope

Diameter

FullDrum

CapacityGearRatio

ForceTo Lift

1000 Lb.

Approx.Ship.Wt.

Model M4021PB

Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in the wire rope will also affect drum capacity. Weight shown is for base model, add 3 lb for brake on M4021PB and M4031PB, add 6 lb for brake on M4311PB and M4411PB.

Machine cut worm gears provide accurate operation and long lasting service. An enclosed oil bath provides continuous lubrication to minimize wear. Automatic brake models provide positive load control for lifting and lowering operations. A durable paint finish is combined with zinc and iridescent dichromate plating to protect against corrosion. Bronze and ball bearings deliver smooth operation. Winches can be field or factory converted for vertical or wall mounting. Wire rope sold separately.

CERTEXCat. Ref. No.

ThernBaseModel

CERTEXCat. Ref. No.

ThernWith

BrakeLoad Rating

1st LayerLoad Rating

Full Drum

WireRope

Diameter

FullDrum

CapacityGearRatio

ForceTo Lift

1000 Lb.

Approx.Ship.Wt.

Model 462PB

Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in the wire rope will also affect drum capacity. Weight shown is for base model, add 5 lb for brake on 462PB, add 10 lb for brake on 482B.

Machine cut worm gearing delivers accurate operation and long lasting service. Hex drive and socket handle included. Winch can also be driven with a maximum 400 rpm drill-motor. Cast aluminum gearbox and drum provide lightweight strength and dura-bility. An enclosed oil bath provides continuous lubrication. An internal mechanical brake provides positive load control for lifting and lowering operations. Bronze and ball bearings deliver smooth operation. Wire rope sold separately.

CERTEXCat. Ref. No.

ThernModel

Load Rating1st Layer

Load RatingFull Drum

WireRope

Diameter

FullDrum

CapacityGearRatio

ForceTo Lift

1000 Lb.

Approx.Ship.Wt.

Model 4WM2Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in the wire rope will also affect drum capacity.

Machine cut worm gearing delivers accurate operation and long lasting service. 115 volt single phase motor 8 foot power cord with grounded plug and pushbutton pen-dent control on 6 foot cord. Cast aluminum gearbox and drum provide lightweight strength and durability. An enclosed oil bath provides continuous lubrication. An internal mechanical brake provides positive load control for lifting and lowering opera-tions. Bronze and ball bearings deliver smooth operation. Wire rope sold separately.

CERTEXCat. Ref. No.

ThernModel Description



WireRope

Diameter

1st Layer Line

Speed

FullDrum

Capacity

Approx.Ship.Wt.

Model 4WP2 Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in the wire rope will also affect drum capacity.

Worm Gear Hand Winches

Series 4WM Worm Gear Hand Winches

Series 4WP Worm Gear Power Winches

WINCHES

Helical/worm gearing delivers dependable operation. Cast aluminum construction pro-vides lightweight strength and durability. An enclosed oil bath provides continuous lubrication. An internal mechanical brake provides positive load control for lifting and lowering operations. Ball bearings deliver smooth operation. Wire rope sold separately.

CERTEXCat. Ref. No.




WireRope

Diameter

1st Layer Line

Speed

FullDrum

Capacity

Approx.Ship.Wt.

Model 4771 Actual drum capacities may be 25-30% less, due to nonuniform winding. Tension in the wire rope will also affect drum capacity.For all models except 4771, line speed is based on reated load, actual speed will vary with load weight and power supply.For Model 4771PN, ratings are at 100 psi. For Model 4771HY, ratings are at 1000 psi. Controls and hoses sold separately.

Cranes move from base to base to serve more than one lift station. Corrosion resistant finish is standard, stainless steel and galvanized models available. A quick disconnect anchor allows you to quickly attach or remove the wire rope. The boom rotates 360º and adjusts to 2 different positions for operation, or folds down for storage or trans-port. Spur gear hand winches include automatic brakes for positive load control. Wire rope sold separately.

CERTEXCat. Ref. No.


Load Rating

Boom DownLoad Rating

Boom Up

WireRope

DiameterMax.

Hook Reach

Approx.Ship.Wt.

Model 5122M1 with 522 pedestal base Max. hook reach is measured from mast center to hook center with boom down.

Cranes move from base to base to serve more than one lift station. Corrosion resistant finish is standard, galvanized models available. A quick disconnect anchor allows you to quickly attach or remove the wire rope. The boom rotates 360º and telescopes to 4 different lengths. Boom height is adjustable with a ratchet and screw-jack. Wire rope and bases sold separately.

CERTEXCat. Ref. No.


Load Rating Extended

WireRope

DiameterMax.

Hook Reach

Approx.Ship.Wt.

Load Rating

Retracted

* Load ratings are based on two part line. Max. hook reach is measured from mast center to hook center with boom fully extended and down.

Collapsible crane can be quickly folded into a self-contained 16 x 17 x 57 inch unit, making it ideal for mobile maintenance crews, rental companies, contractors, and other uses where portability is important. The crane features a 4 position telescoping boom for extended reach, scratch and spark resistant wheels, and rear caster wheels for maneuverability. Loads area raised and lowered using a manually operated hydraulic jack, equipped with an overload relief valve to help prevent overload damage.

CERTEXCat. Ref. No.

ThernModel

Load Rating Retracted

Load RatingExtended

Hook Reach Retracted

Hook ReachExtended

Hook Height Retracted

Hook Height Extended

Approx.Ship.Wt.

Model 548 Hook reach is measured from mast center to hook center with boom horizontal.Hook height is measured from floor level to hook center with boom fully up.

Series 5122 Portable Davit Cranes

Series 5124 Portable Davit Cranes

Model 548 Portable Floor Crane

Model 5124M2 with 524 pedestal base

Thern, Inc.Series 477 Helicle/Worm Gear Power Winches

11

11-16

WINCHES

hoists - certex · harrington hoists, inc. peerless cf hand chain hoist 11-4 11. ... • heavy duty...

Documents