hmj design eelctric fencing
DESCRIPTION
ÂTRANSCRIPT
©zooE
agent: HMJ Design [email protected]: 00 45 98 39 27 99fax: 00 45 98 39 28 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
Catalog
Unobtrusive electric fencesand other equipment for zoos
203
04
05
06
07
08
09
10
11
12
13-14
15
16
17
18
19-21
22
23
24
25
26
27
Electro Grass - Instructions
Electro Grass - Information
Short Grass Rock
Short Grass M
Short Grass D
Long Grass S
Long Grass M
Long Grass L
Electrobamboo M
Electrobamboo S
Instructions for setting up the Electro Grass
Elektroliana - Information
Electroliana A
Electroliana B
Electroliana C
Mounting - connection, in-struction for Electroliana
Climbing liana - Information
Climbing liana single
Climbing liana triple
climbing liana triple with
Ape Game Station
List of references
KGF 1.01
KGM 1.02
KGD 1.03
LGS 2.01
LGM 2.02
LGL 2.03
EBM 3.01
EBS 3.02
ELA 4.01.01/02
ELB 4.02.01/02
ELC 4.03.01/02
CLI 5.01.01
CLI 5.02.02
CLI 5.03.01
A 01 - A 12
Contents
3
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
With the help of Electrograss, electric fences can be designed invisible for the visitor’s eyes. Depending on individual requirements, we can offer protective fences in heights from 0,3 to 3 metres.For the protection of planted areas, trees and security glass. Boundary for dry and wet trenches.With the help of Electrolianas it is easy to protect tree-trunks, tree tops or single branches unobstrusively.
The electrograss is made of stainless steel and plastic material. Due to security reasons, small balls are attached to the endings of the wire of Long Grass and Electrobamboo.
InstructionsGeneral
Protection of tree trunks and treetops
Installation
For installation stick grass into the ground while following the desired direction. The plastic base should end about 5cm above the ground to guarantee a proper insulati-on. Then connect single grass with the one next to it. To do this, press wire endings into the crimp sleeves. Connect Electro-grass with a standard power energizer for electric fences.
All warning notices and limitations for standard electric fences are required. Electrograss must not be used as a se-curity relevant barrier.
4
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
1 plastic base Ø = 9-12 mm 2 stainless steel wire Ø = 0,8 mm without nodular endings
InformationElectro Grass
Information to Short-grass
Information to Long-grass
Caption 1 soil support Ø = 16 mm 2 stainless steel wire Ø = 1,5 mm 3 stainless steel shaft Ø = 8 mm 4 nodular endings 5 crimp sleeve Ø = 1,5 mm
Important safety informationWARNING:
Wear safety googles when mounting!
Caption1
1
2
2
3
4
5
5
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Detail drawing Short Grass Rock KGF 1.01
KGF 1.01Short Grass Rock
Example installation
crimp sleeve
max. total height: 55 cminstallation height: 49 cm lenght of ground: 10 cmlenght of wire: 45 cm
material requisition per meter: 2 pcs
Details to KGF 1.01:
crimp sleeve
Important safety informationWARNING:
Wear safety googles when mounting!
Order no.:
6
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: KGM 1.02 Short Grass M
max. total height: 75 cminstallation height: 50 cm lenght of ground: 30 cmlenght of wire: 45 cm
material requisition per meter: 2 pcs
Details to KGM 1.02:
Important safety informationWARNING:
Wear safety googles when mounting!
7
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: KGD 1.03 Short Grass D
max. total height: 75 cminstallation height: 50 cm lenght of ground: 30 cmlenght of wire: 20-35 cm
material requisition per meter: 2 pcs
Details to KGD 1.03:
Important safety information WARNING:
Wear safety googles when mounting!
8
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.:LGS 2.01
Long Grass S
max. total height: 150 cminstallation height: 105 cm lenght of ground: 50 cmlenght of shank: 10 cmlenght of wire: 95 cm
material requisition per meter: 1 pcs
Details to LGS 2.01:
9
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: LGM 2.02Long Grass M
max. total height: 190 cminstallation height: 145 cm lenght of ground: 50cmlenght of shank: 45 cmlenght of wire: 95 cm
material requisition per meter: 0,9 pcs
Details to LGM 2.02:
10
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: LGL 2.03Long Grass L
max. total height: 210 cminstallation height: 165 cm lenght of ground: 50 cmlenght of shank: 65 cmlenght of wire: 95 cm
material requisition per meter: 0,8 pcs
Details to LGL 2.03:
11
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: EBM 3.01Electrobamboo M
max. total height: 430 cminstallation height: 365 cm lenght of ground: 70 cmlenght of shank: 270 cmlenght of wire: 93 cmProduct consists of 2 parts
material requisition per meter: 0,75 pcs
Details to EBM 3.01:
consists of 2 parts
12
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: EBS 3.02Electrobamboo S
max. total height: 310 cminstallation height: 255 cm lenght of ground: 65 cmlenght of shank: 245 cmlenght of wire: 93 cmProduct c onsists of 2 parts
material requisition per meter: 0,75 pcs
Details to EBS 3.02:
consists of 2 parts
13
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
1. Two wires with nodular ends 2. Before connecting remove nodular ends
3. Put both ends into the tube
4. Press connecting tube together
5. Finished connection between 2 wires
Instructions for connecting two wires:
1. Bend grass wires as shown in the drawings.
2. Set up the positions and distances between the grasses.
Distances: Short grass approx. 0,50 m Long grass approx. 1,10 -1,20 m Electrobamboo approx. 1,40-1,50 m
3. Drill hole for soil support.
Short grass rock diameter 12mm, depth 50 mm (maintain depth exactly) Short grass diameter 15 mm, depth 250 mm (maintain depth exactly) Long grass diameter 20 mm, depth 400 mm (maintain depth exactly) Electrobamboo diameter 25 mm, depth 600 mm (maintain depth exactly)
WARNING important! The plastic pole (soil support) has to stick at least 50 mm out of the ground or themulch. It is necessary to guarantee the isolation!
4. Stick grass into the ground and if necessary bend blades as you wish.
5. Set up the connections between the grass with the enclosed crimp sleeves. Remove the nodular ends on one wire of surrounding grasses with a wire cutter. Put both ends into the sleeve and press the crimp sleeve. Colour the crimp sleeve (i.e. matt black).
6. Colour grasses if you wish. You can adjust the grasses to the background with colourspray. We recom- mend our “Camouflage spray” in proper RAL colours.
Instruction for connecting
Instructions for installations
14
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
1. Stick Electro Grass into the ground
2. Cut off one wire
4. Mount power connection 5. Finished connection
Instructions for connecting Electro Grass with a standard power energizer for electric fences.
Instructions for installations
2. ... and bend wires
3. ...and bend the wire down
15
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
Protection of trees, Protection of treetops and superficial root areas (for example in ape enclosures)
Electroliana exists in 3 different typesLiana A with simple wire stalk for protection of treesLiana B with double wire stalk for protection of treesLiana C with triple wire stalk for special protection
Electroliana B with dou-plewire and thick base
Options of construction: reticular or spiral structure
If you attach the Liana in a reticu lar structure it may will affect the secondary growth of the tree. To avoid this you should move the structure upwards every 1 or 2 years.
If you attach the Liana in a spiral structure to the trunk, you have to loosen and unbend the Liana two times a year, to avoid overexpandation of the Liana.
Design: normal base (profil: circular) or thick base
For the reticular structur you need this many Lianas = 1 pair
Perimeter of trunk in cmHeight of the part of tree you want to protect
1 m 2 m 3 m 4 mPerimeter to 60 cm 2,50 m 5 m 7,50 m 10 m
Perimeter to 120 cm 5 m 10 m 15 m 20 m
Perimeter to 180 cm 7,50 m 15 m 22,50 m 30 m
Perimeterto 240 cm 10 m 20 m 30 m 40 m
Protection of tree trunks and treetops
One Liana can be produced with a maximum length of 10 metres. When ordering, please give informati-on about the height of the part you need to protect for and the thickness of the trunk. We produce the length you need.If you want to attach the Liana with a spiral structure, we will send you connected lianas.
Lianas with thick base
In the past there were some problems with the use of the Electro Liana because of ants and snails, which caused short-circuits at the feet of the Liana and unwanted sounds.To avoid these problems we created a new Liana with a thicker base, which enlarges the distance to the ground. With its irregular border it looks nearly invisible.
Electroliana Information
16
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Normal base: ELA 4.01.01Thick base: ELA 4.01.02
Front view - simple wire
Sections/ mounting on a tree trunk
1 base Ø = 8 mm 2 stainless steel wire Ø = 0,8 mm without nodular endings
Caption
Liana in a spiral structure on the trunk
Electroliana A
ELA 4.01.02 with thick base, coloringELA 4.01.02 with thick base, black
ELA 4.01.01 normal base, coloringELA 4.01.01 normal base, black
1
2
1
2
17
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Normal base: ELB 4.02.01Thick base: ELB 4.02.02
Electroliana B
Front view - double wire
Sections/ mounting on a tree trunk
1 base Ø = 8 mm 2 stainless steel wire Ø = 0,8 mm without nodular endings
Caption
ELB 4.02.02 with thick base, blackELB 4.02.02 with thick base, coloring
ELB 4.02.01 normal base, blackELB 4.02.01 normal base, coloring
1
2
1
2
18
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Front view - triple wire
Normal base: ELC 4.03.01Thick base: ELC 4.03.02
Electroliana C
Sections/ mounting on a tree trunk
1 base Ø = 8 mm 2 stainless steel wire Ø = 0,8 mm without nodular endings
Caption
1
2
1
2
ELC 4.03.02 with thick base ELC 4.03.02 with thick base, coloring
ELC 4.03.01 normal base, blackELC 4.03.01 normal base, coloring
19
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
WARNING: Wear safety googles when mounting!
1. Attach the Liana paired at the favoured high to the trunk (with a stainless steel nail or a rubber band )
2. Connect the two parallel strings of the Liana every 100 cm. This will form a reticular structure over the trunk. Please use black cable connector for the con-nection of the strings.
Connection of the strings with cable connector
Reticular structure
ElectrolianaConstruction manual
According to the thickness (perimeter) of the tree trunk you need 1 pair of Lianas per 60 cm. The Lianas have to be about 50 per cent longer than the part of the trunk you want to protect.
20
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
3. Now connect the wire stalk of the Liana. You have to connect it in a special way, so the Liana cannot distort against the trunk.
It works best when you twist the long parts of the wire with each other.
4. Connection with a standard power energizer - disconnect connector, cut off insulation, bend round one wire of Liana and connect both wires with a crimp sleeve.
You can take use one mounting part per running meter. Sometimes you won‘t need it because of the structure of the Liana.For connecting the mounting part with the Liana, cut off carefully the plastic co-ating of liana and press Liana into the on the tree attached mounting parts.
5. connection
To attach to the trunk, you can use a rubber band or tree straps
ElectrolianaConstruction manual
21
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
Spiral structure If you attach the Liana in a spiral structure to the trunk, you have to loosen and un-bend the liana two times a year, to avoid overexpandating of the Liana.
For attaching the Liana in spiral structure, you must use mounting parts.
WARNING: Wear safety googles when mounting!
For attaching the Liana in spiral structure, you need 3 mounting parts per running metre.
For connecting mounting part with Liana: Attach mounting part to the tree, cut off the plastic coating of Liana carefully, press it into the mounting part.
Connect Liana with standard power ener-gizer for electric fences. Explanation on previous page.
Endcap, required after cut off, order seperatly!
Order-no.: XBF 1Mounting part
Order-no.: XEC 1Endcap
ElectrolianaConstruction manual
22
Subject to technical changes and changes in dimensions! ©zooE
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark
Climbing liana
Climbing lianas are made from sturdy ropes covered with a permanently elastic plastic sheath. They are composed of a malleable metal core and one or three single strands twisted in itself. The diameter of the lianas are varying, but can also be produced on costumers demand in different strengths. It is possible to produce the liana with or wi-thout side branches. Based on the material composition, our lianas are very strong and more durable than natural lianas, but look confusingly similar to the natural model.
The vines can be used as a climbing aid for small animals; especially small species of monkeys or sloths, etc.
Climbing liana exists in 3 different types
Climbing liana simpleClimbing liana tripleClimbing liana triple with branches
Technical information and installation:
Moreover, it is possible to produce climbing lianas with a thicker diameter according to customer
Colour: brown-gray-dark green marbled
Lengths of about 10 m or ordered individually (not over 20m)The lianas are supplied with two eyelets for installations at stable hooks on walls, rocks, or climbing trees.
The lianas can be bent and tie together. We recommend bending the vines spiral or turning in „zigzag“ to achieve a natural lock.
Information
Climbing aid for monkeys, sloths, etc.
23
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.:
Climbing liana single
One or two single strands (diameter of 5-10mm) twisted, with metal core without branches
Diameter: 10-20 mmWeight: 0.47 kg per meter
Information:
Different designindividual item
climbing liana in silvery marmoset enclosure
CLI 5.01.01
24
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.: Climbing liana triple
Three self-twisted single strands with a diameter of 7.5-15mm, with metal core without branches, slightly spirally twisted version
Diameter: 15 to 35 mmWeight: 0.5 kg per meter
individual item
climbing liana with squirrel monkey
CLI 5.02.01
knotted connection of two single lianas
Information:
25
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Order no.:
Climbing liana triplewith branches
Three self-twisted single strands with a di-ameter of 15-20mm with metal core with side branches, elaborate, spirally twisted version
Diameter: 25-50 (80) mmWeight: 0.8 kg per meter
Information:
CLI 5.03.01
Different design
26
~ registered design ~
Subject to technical changes and changes in dimensions!
HMJ Design AS [email protected]: 00 45 98 39 27 99Gl. Skørpingvej 156DK 9250 Skørping, Denmark ©zooE
Ape game stationTimed feeding machine
Easy handling due to intelligent plug-in mounting. Food dispenser for five fee-ding portions. Feeding machine with transparent front and
rear window
Stainless-steel cover, camouflage green, remova-ble and secured by padlock
Stainless-steel case in “camouflage green” colour coating / varnishing
550 mm250 mm
800
mm
Steel section post for ground anchorage
Front window (impact-resistant, UV-resistant synthetic material) with long holes / slots for five working levels / removable shelves
Transparent rear window or non-transparent rear plate
Removable plastic shelves, may be flexibly arran-ged like a plug-in shelf
Hole
With the help of a stick or a similar object apes will move the food through several floors and obstacles in order to release it at the bottom hole.
Order-no.: A 01 - A 12Please look at price list
27Germany
• Zoo Leipzig elephant-, tapir-,monkey-, leopard- and apes- enclosure • Zoo Rostock elephant- and cheetah enclosure (test)• Allwetterzoo Münster apes- andrhino enclosure• Zoo Osnabrück elephant enclosure• Zoo Heidelberg elephant enclosure• Tierpark Munich Hellabrunn polarbear- and elephant enclosure• Zoo Hannover Yukon Bay, Ape game station• Zoologischer Garten Magdeburg outdoor enclosure Amazonien• Zoo Dortmund outdoor enclosure Orang Utan, Ape game station• Zoologischer Garten Berlin outdoor enclosure Gorilla• Zoo Braunschweig, „Arche Noah“ outdoor enclosure Orang Utan• Zoo Frankfurt am Main apes enclosure• Zoologischer Garten Krefeld outdoor enclosure Gorilla• Zoologischer Garten Köln rhino enclosure, Animal nursery• Zoo am Meer Bremerhaven Ape game station• Zoo Duisburg outdoor lynx• Zoo Dresden giraff- and elefant enclosure• Opelzoo Kronenberg elefant enclosure
Austria • Zoological garden Schönbrunn, Wien • Zoo Salzburg• Alpenzoo Insbruck Ireland
• Dublin Zoo Italy• Zoom Torino, Cumiana -Turin• Bioparco Zoologica di Roma
Sweden• Stiftelsen Skansen Stockholm• Kolmärder Djurpark
The Nederlands• Burgers zoo, Arnheim• Dierenpark Amersfoort
Denmark• Ree Park Ebeltoft
Switzerland• Zoo Zürich• Natur- und Tierpark Goldau• Tierpark Lange Erlen, Basel Greece• Attica Zoological Park, Spata France
• ZooParc Tregomeur• Jardin Zoologique, Lyon• Le Pal Dompier sur Bresbre• Reserve zooloque de Calviac
United Kingdom• Edinburgh Zoo• Colchester Zoo, Essex• Chester Zoo• Marwell Zoological Park, Winchester
Belgium• Zoo Park Paradisio, Cambron-Casteau
Czech Republic• Zoo Dvur, Kralove• Zoo Chateau Zlin, Lesna
List of references
Hungary• Budapest Zoo and Botancial Garden
United Arab Emirates• Al Bustan Zoological Centre, Al Maliha