hlr series - hot liquid rated liners
DESCRIPTION
ÂTRANSCRIPT
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
Covering the world.Protecting the Earth.
Rev
01.1
6
Covering the world.Protecting the Earth.
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
HeadquartersNORTH AMERICAN PLANT2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234Toll free in North America: 1.800.571.3904
ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600
SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999
Growing market expectations require new high performance materials. Solmax’s latest innovation is its patent pending HLR (Hot Liquid Rated) Series of geomembranes.
With its unique blend of special resins and additive package, this series of hot liquid resistant geomembranes offers the same hydrostatic strength and long-term durability as traditional HDPE Geomembranes do at typical service temperatures. Solmax’s goal is to consistently provide high quality products and meet high market demands.
SOLUTIONS FOR HOT LIQUID CONTAINMENT
2
Long term performance of a geomembrane is the main concern of any designer, especially when higher temperatures are considered. The depletion rate of anti-oxidants rises as temperatures increase. The innovative additive package used in the HLR Series allows this geomembrane to perform, even at temperatures as high as 100°C (212°F), for extended periods of time.
As geomembranes usually serve to contain solids or liquids, also to be considered is the anti-oxidant depletion rate in liquids. Just as a screw will rust at a higher rate in water than in air, the depletion rate of anti-oxidants of geomembranes is higher when they are immersed rather than exposed. Solmax continues to innovate by using a special additive package that allows its HLR Series to retain their anti-oxidants in hot liquids, which allows for long term durability of the geomembranes, even in the harshest conditions. As per ASTM D-5322*, Solmax’s HLR Series is the only PE geomembrane to retain over 90% of its anti-oxidants after 90 days of full immersion in 80°C (176°F) water, making it the only PE geomembranes to be Hot Liquid Rated.
LONg TERM DURAbILITy IN HOT LIQUIDS
Property Test Method UnitHLR Series
(60 mils/1,5mm)
Water bath: 90 days at 80°C (176°F) (HPOIT) ASTM D-5322 / ASTM D-5885 % > 90
Oven Aging: 90 days at 100°C (212°F) (HPOIT) ASTM D-5721 / D-5885 % > 90
* ASTM D-5322 modified, uses water at 80°C (176°F) as immersion solution
3
Hydrostatic strength at high temperaturesAs temperature increases, the elastic modulus of traditional HDPE geomembranes decreases. This means that the material becomes softer and offers less tensile strength. The specialty resin used in the HLR Series allows these geomembranes to retain their elastic modulus and tensile strength values at temperatures up to 100°C (212°F).
Property Test Method UnitHLR Series
(60 mils/1,5mm)
Tensile Properties at 100°C (212°F)
Strength at Yield ISO 527 1/2 Psi > 600
Elastic Modulus ISO 527 1/2 Psi > 6,500
WELDINg COMpATIbILITy WITH HDpEThe HLR Series’ resin is a unique blend of HDPE. This allows this distinctive geomembrane to be welded to traditional HDPE or LLDPE liners.
AppLICATIONSSolmax’s HLR series was specifically developed for applications where the geomembrane will be in contact with hot fluids or exposed to hot environments. Such applications include:
Hot fluid discharges Brine Ponds Bioreactors Hot lixiviate landfills Geothermal ponds Tailing dams Petrochemical Secondary containment
SOLMAXSolmax’s Patent Pending HLR Series is an innovative product in line with Solmax’s core goals: Offering containment products that meet our customers’ needs. Solmax is a pioneer of Innovation in the Geosynthetics Industry and offers value added products for most containment applications. For additional information on the HLR Series or any other products, please contact your local Solmax representative.
4
«»
MISSION:
Solmax offers synthetic products used for separation and / or containment of solids and fluids in soil protection and water management applications. Intended for the construction, civil engineering and environment fields, Solmax’s products aim to improve the quality of life of individuals as well as our society’s well-being.
Solmax is a worldwide leader in PE Geomembranes manufacturing, PVC pannel fabrication and offers both containment and fluid transportation solutions including HDPE pipes, valves, fittings and accessories. Manufactured from Canada, Malaysia and Chile, its products are sold in over 60 countries and are used by the biggest names in the mining, petroleum, waste management, water and civil engineering sectors. Solmax products are vital in protecting soils from contamination in applications as critical as the landfills of the world’s most populated cities to the tailings or heap leach pads of mines operating in environmentally fragile ecosystems.
SOLMAX
vISION:
Covering the world.Protecting the Earth.
5
Property Test Method Unit Metric/Imp. HLR
Physical
Thickness ASTM D-5199 mm/mils 1.5/60 2.0/80 2.5/100
Sheet Density ASTM D-1505 g/cm3 > 0.94 > 0.94 > 0.94
Tensile Properties (min. avg.) ASTM D-6693
Strength at Yield kN/m / ppi 24.5/140 33.3/190 38.5/220
Elongation at Yield % 13 13 13
Strength at Break kN/m / ppi 42/240 56/320 68.3/390
Elongation at Break % 650 650 650
Tear Resistance ASTM D-1004 N / lbf 200/45 258/58 320/72
Puncture Resistance ASTM D-4833 N / lbf 534/120 712/160 823/185
Tensile Properties (min. avg.) @ 100 C ISO 527 1/2
Strength at Yield Mpa/lbf 4.14/600 4.14/600 4.14/600
Elastic Modulus Mpa/lbf 44.7/6500 44.7/6500 44.7/6500
Mechanical
Carbon Black Content ASTM D-4218 % 2.0-3.0 2.0-3.0 2.0-3.0
Carbon Black Dispersion ASTM D-5596 Category Cat. 1 & Cat. 2 Cat. 1 & Cat. 2 Cat. 1 & Cat. 2
OIT - Standard AVG ASTM D-3895 min 160 160 160
HPOIT - High Pressure (avg) ASTM D-5885 min 800 800 800
Stress Crack Resistance ASTM D-5397 hr 600 600 600
Oven Aging @85 C - % Retained after 90 days ASTM D-5721
% HPOIT - Retained ASTM D-5885 % 90 90 90
Oven Aging @100 C - % Retained after 90 days ASTM D-5721
% HPOIT - Retained ASTM D-5885 % 90 90 90
UV Resistance - % Retained after 1600 hours ASTM D-7238
% HPOIT - Retained ASTM D-5885 % 85 85 85
Waterbath Immersion @ 80 C - % Retained after 90 days
% HPOIT - Retained ASTM D-5885 % 90 90 90
Dimensional Stability ASTM D-1204 % ± 2 ± 2 ± 2
Endurance
6
Property Test Method Unit Metric/Imp. HLR
Solmax reserves the rights to change these values at any time without notice, please confirm with your local sales representative for actual values.
Roll Width m/ft 8.00/26.2 8.00/26.2 8.00/26.2
Roll Length m/ft 140/459 105/344 85/279
Area (Surface/Roll) m2/sf 1120/12,026 840/9013 680/7310
Dimensions
Smooth · · ·
Standard Finishes
7
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
Covering the world.Protecting the Earth.
Rev
01.1
6
Covering the world.Protecting the Earth.
SOLMAX.COM CANADA - MALAYSIA - CHILE - USA - CHINA - SOUTH AFRICA - FRANCE - INDIA
HeadquartersNORTH AMERICAN PLANT2801 Marie-Victorin Blvd.Varennes, QuebecCanada J3X 1P7Tel.: 450.929.1234Toll free in North America: 1.800.571.3904
ASIAN PLANTLot 28, Jalan Sungai Pinang 4/2Taman Perindustrian Pulau Indah, Fasa 2B42920 Pelabuhan Klang, Selangor Darul Ehsan, MalaysiaTel.: 603.3375.3600
SOUTH AMERICAN PLANTAV. General Velázquez No 11001Barrio Industrial, Puerta Sur, San Bernardo, ChileTel.: 56.2.2862.9999