hl-2489 evt4 brochure - electric system

EVT4 SeriesLED & Fluorescent Technology

2 HOLOPHANE® | LED & Fluorescent | EVT4 Series

EVT4 Series

HOLOPHANE®

THE EVT4 SERIES’ SLEEK, IMPACT-RESISTANT HOUSING IS IDEAL FOR A WIDE-RANGE OF INDUSTRIAL APPLICATIONS. AVAILABLE IN FLUORESCENT AND LED TECHNOLOGY, THE EVT4 IS ENERGY-EFFICIENT AND AVAILABLE WITH MANY CONTROLS OPTIONS. IT IS IP65 RATED AND SUITABLE FOR WET LOCATIONS.

To meet these 21st century needs, it is imperative that the LED system is properly engineered for thermal and performance considerations. Holophane has exhausted many hours of research and development to ensure reliability through innovative integration of this exciting technology.

HOLOPHANE® | LED & Fluorescent | EVT4 Series 3

Features and Benefi ts

O Energy effi cient LED or fl uorescent technology

O Multiple mounting options

O Controls enabled

O Vandal-resistant polycarbonate construction

O Wet location listed when mounted to or suspended from ceiling

O Damp location listed when mounted to wall

Typical Applications

O Cold Storage Facilities (LED)

O Parking Garages

O Industrial Spaces

O Transit Stations

O Stairwells

O Canopies

O Locker Rooms

O Hospitals

| Indoor Lighting

EVT4 LED and EVT4 Fluorescent


HOLOPHANE®

Conduit Entry Chain Mount

O-RING

LOCK NUT

FITTING

The EVT4 fi xture was designed with the contractor in mind. With its multiple mounting options, this fi xture provides easy installation in both relight and new construction applications. Whether the application requires mounting to an existing junction box, to the surface, or by chain or conduit, we have a solution for you. Captive-latch design and smooth exterior allow for easy access and maintenance.

Easy Installation

Tilt for Ramp Applications

Quick Mount Junction Box Surface Mount (Standard Mounting Bracket)


| Indoor Lighting

Using EVT4 fi xtures for relight opportunities can dramatically revitalize the look of a space. Other benefi ts include enhanced lighting quality and distribution, as well as reduced energy and maintenance costs. In fact, energy consumption can be reduced by as much as 30-50% leading to a payback of less than two years depending on original lamp source replaced. Ideal spaces for relighting include areas with long burn hours or where the current fi xtures use older-style lamps and ballasts. The EVT4 fi xture offers several control solutions for maximizing energy effi ciency without sacrifi cing light

Relighting & Revitalizing

PHOTO SENSOR OCCUPANCY SENSOR

Rugged Construction

quality. EVT4 is simply the smart lighting choice for sustainability, energy savings and reducing costs. California Title 24 compliant.

Traditionally, parking garages are illuminated 100% of the time but are only occupied 20% of the time. By specifying additional options such as a photo cell or occupancy sensor, you will save energy and extend the life of the fi xture.

The injection-molded, vandal-resistant housing of the EVT4 fi xture is UV-stabilized frosted polycarbonate with a continuous poured-in-place, closed-cell gasket. Similarly, the injection-molded lens is UV-stabilized and impact-resistant. The lens, featuring a decorative rib detail, and the tamper-resistant latches are made of a clear, transparent polycarbonate material.

The channel and channel cover are constructed from 20-gauge steel. The fi xture design allows for 10 -12% uplight to minimize the “cavern effect” while featuring tool-less ballast and wiring access for ease of maintenance.

Holophane Lighting offers the following warranty for rough-service fi xtures: Rough-service products by Holophane Lighting are engineered to with stand extreme physical assault. When properly installed per instructions for maximum vandal resistance, any rough-service lighting fi xture utilizing a polycarbonate lens and/or polycarbonate housing enclosure that is rendered inoperable as a result of physical abuse, will be repaired or replaced without charge for the life of the product.

• Cold weather, wet location listed and IP65 rated

• Available with 360° lenses for mounting heights up to 8’ and 20’

• 15-minute time delay after last motion is detected

• Energy-saving solution for daylight harvesting

• Wet location listed

• Mounted on end of fi xture for optimal performance

Note: EVT4 LED also available with: 0-10V Dimming, 100-50% power control, Bi-Level Control, ROAM wireless monitoring system


HOLOPHANE®

EVT4 LED

Impact-resistant polycarbonate lens

Injection-molded,vandal resistant housing

Utilizes high-effi ciency LEDs

Optical Control Films Direct Light: general lighting environments

Asymmetric (ASYM)Provides broad light distribution which is ideal for lower mounting heights

Symmetric (SYM)Well suited for general lighting environments


| Indoor Lighting

Prismatic Light Control Film

EVT4 Fluorescent

Prismatic light control fi lm Striped light control fi lm Opaque light control fi lm Houseside shield eliminates light trespass

EVT4 with houseside shield option EVT4 with uplight shield option EVT4 without houseside shield oruplight shield options

Tool-less ballast and wiring access

Precision-formed,high-performance segmented optics

Injection-molded,vandal resistant housing

Lighting Control Options: customize light & reduce glare

HOLOPHANE®


Dimensional Details

Ordering Information

EVT4 LED

Intended UseIdeal for use in applications where smart, energy-effi cient fi xtures are desired. Typical applications include parking garage, canopy, transportation, school, hospital, cold storage and exterior retail environments where moisture or dust is a concern. Polycarbonate enclosure protects fi xture while remaining easy to service and clean.

Construction UV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing with continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and channel cover. Aluminum sheet metal board plate for thermal conduction and support. Fixture design allows for uplight.

OpticsUV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate lens with aesthetic rib detail (.080” thick). Asymmetric (ASY) optical control fi lm provides broad light distribution (ideal for lower mounting heights). Symmetric (SYM) optical control fi lm is well suited for general lighting environments. Clear transparent, tamper-resistant, polycarbonate latches standard (8 Torx T-20 tamper-resistant screws included). Stainless steel latches also available.

ElectricalUtilizes high-effi ciency LEDs mounted to core circuit boards. 4100 Kelvin temperature standard, with additional color temperatures also available. High effi ciency driver operates 100V through 277V, 50-60HZ. Integral surge protection standard and tested in accordance with IEEE/ANSI C62.41.2 to Category C Low. Includes a temperature-sensing component that will limit the temperature of the LEDs in case of excessive ambient temperatures or mis-application. One driver used for 39W and 59W; two drivers used for 79W and 114W. Bi-level control and low (0-10) voltage dimming standard (see options for prewiring). L93 at 60,000 hours (350mA) and L85 at 60,000 hours (525mA).

InstallationStainless steel surface spring-mounting brackets standard (2 included) allows for ceiling or suspended mount. A variety of stainless steel mounting options also available: J-box mounting and mounting brackets for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). Surface conduit entry on each end and on top. For horizontal and vertical mounting on a wall, application must be under a covered ceiling and QMB option recommended. 1/2” - 3/4” KO.

ListingsCSA Certifi ed to UL and C-UL standards for ambient temperatures ranging from -20°C to 40°C. NOM Certifi ed (see Options). EVT4 LED is wet location listed for covered ceiling applications. Product will be rated for damp location only when wall mounted. IP65 rated.

Meets Designlights™ Consortium requirements for Fuel Pump Canopy (standard). Meets Designlights™ Consortium requirements for Parking Garage Luminaires (see Options).

See “LED Specifi cation Matrix” below for ambient temperature listings.

Performance Specifi cations

Warranty5-year limited warranty. Complete warranty terms located atwww.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxRough Service products by Holophane Lighting are engineered to withstand extreme physical assault. When properly installed per instructions for maximum vandal resistance, any rough service polycarbonate lens and/or polycarbonate housing enclosure that is rendered inoperable as a result of physical abuse, will be repaired or replaced without charge for the life of the product.

EVT4 LEDMaximum Weight: 5.9 kg. (13.5 lbs.)

10.5 mm(4-1/8”)

21 mm(8-1/4”)

10.5 mm(4-1/8”)

139.1 mm(54-3/4”)

LED SPECIFICATION MATRIX

System Watts Delivered Lumens (Nominal) Ambient Temperature °C

39 3000 40

59 4100 40

79 6000 40

114 8000 25

| Indoor Lighting


Preferred Selections:

2WATTAGE

39LED59LED79LED114LED

39LED

Most Frequently Ordered Catalog Numbers

5VOLTAGE

MVOLT120277347480

2773

COLOR TEMP.BLANK

273557

AMB

27

Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected) ®

6OPTIONS

SFWLF

WLFINWLFEND

SF

STEP 1: LUMINAIRE

EVT4 EVT4 LED

STEP 2: WATTAGE

39LED 39 watts 59LED 59 watts 79LED 79 watts 114LED 114 watts

STEP 3: COLOR TEMPERATURE1

BLANK 4100K (CRI 65) 27 2700K (CRI 80) 35 3500K (CRI 80) 57 5700K (CRI 70) AMB Amber LED’s

STEP 4: LIGHT CONTROL FILM

ASY Asymmetric beam SYM Symmetric beam

STEP 5: VOLTAGE

BLANK MVOLT 120 120V 277 277V 3472 347V 4802 480V

STEP 6: OPTIONS3

SF4 Single fuse BSL7224 Bodine® emergency LED battery pack for 0°C and up BSL722C4 Bodine® emergency LED battery pack for -20°C and up WLF5 Wet location fi tting (two outboard, top) WLFIN5 Wet location fi tting (two inboard, top) WLFEND5 Wet location fi tting (one end) WLFEND25,6 Wet location fi tting (both ends) CS89 6' white cord, 16/3, no plug, wet location CS88 6’ Brad Harrison, 16/3 cord and straight blade plug set CS8812 12’ Brad Harrison, 16/3 cord and straight blade plug set STSL Stainless steel tamper resistant latches QMB Quick-mount ceiling bracket CMB Chain-mount suspension bracket JSB Junction box snap-bracket BLC2 80% lumen maintenance DIM Pre-wired for 0-10V low voltage dimming (100-10%) DIM27 Line-voltage power control (100-50%) L/SP Less surge protector MSI__4,8 Wet location motion sensor and bracket PE4 Photoelectric cell (button type) DLC4 Designlights™ Consortium qualifi ed for Parking Garage Luminaires NOM NOM Certifi ed

STEP 7: ACCESSORIES

VAPSMB Surface spring mount bracket VAPQMB Quick-mount ceiling bracketVAPCMB Chain-mount bracket VAPJSB Junction box snap bracket VAPPMP Pendant monopointVAPPMK Pendant monopoint kitVAPPMPB Pendant monopoint bracketHC368,11 Wire hook and 36' chain setRK1 T20BIT Hex base driver bit, Torx T20. Tamper resistant screws with center reject pinRK1 T20DRV Torx T20 screwdriver for use with tamper resistant screws with center reject pin___________________________________________1 The CCT value providedis of lamp source and actual CCT will vary upon levels.2 Non-DLC compliant.3 For additional options, consult factory.4 Must specify voltage.5 5/8" long NPT threaded hub.6 Not available with cord sensor or photocell options.7 Available with 79LED and 114LED only.8 For mounting up to 8', specify MS18; for mounting up to 20', specify MS120.9 Not applicable with ASY or SYM optical fi lm.10 Requires CMB (chain mount bracket) option.11 For stainless steel, specify STS (example: HC36 STS).12 4100K and 5700K are LED CCTs.

1LUMINAIRE

EVT4

EVT44

LIGHT CONTROL FILM

ASYSYM

ASY

HOLOPHANE®


Dimensional Details

Ordering Information

EVT4 Fluorescent

Intended UseIdeal for use in applications where smart, energy-effi cient fi xtures are desired. Typical applications include, parking garage, canopy, transportation, school, hospital and exterior retail environments where moisture or dust is a concern. Polycarbonate enclosure protects fi xture while remaining easy to serviceand clean.

ConstructionUV-stabilized, injection-molded, impact-resistant, frosted polycarbonate housing with continuous poured-in-place, closed-cell gasket. 20-gauge steel channel and channel cover. Tool-less ballast and wiring access. Fixture design allows for10-12% uplight.

OpticsUV-stabilized, injection-molded, impact-resistant, clear transparent, polycarbonate lens with aesthetic rib detail (.080” thick). Clear transparent, tamper-resistant, poly-carbonate latches standard (8 Torx T-20 tamper-resistant screws included). Stainless steel latches also available. Refl ectors are precision-formed, high-performance, segmented optics utilizing premium specular aluminum and optimized for both 1- and 2-lamp confi gurations. Provides 95% refl ectivity and warranted for 25 years.

ElectricalBallasts: Thermally protected, resetting, Class P, HPF, Sound Rating A+. 90°C rated Advance Cool Running™ ballast standard for T5HO. T8 ballast starting tem-perature is -18°C (0°F) and T5HO starting temperature is -29°C (-20°F).

Lamps: 4100K lamps standard. Secured with rotary locking lampholders for ease of re-lamping and to minimize disconnection due to vibration or incidental contact.

InstallationStainless steel surface spring-mounting brackets standard (2 included). A variety of stainless steel mounting options available: surface conduit entry on each end and on top, j-box mounting and mounting brackets for suspension with aircraft cable (cable not included). Optional stainless steel V-hooks available for chain hanging (chain not included). For horizontal mounting on a wall, application must be under a covered ceiling and QMB option recommended. 1/2” - 3/4” KO.

ListingsCSA Certifi ed to UL and C-UL standards. NOM Certifi ed (see Options). CSA Listed for ambient operation up to 40°C (104°F). EVT4 is wet-location listed for covered-ceiling applications. Product will be rated for damp location when wall mounted. IP65 rated.

Warranty1-year limited warranty. Complete warranty terms located atwww.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx

Performance Specifi cations

EVT4 FluorescentMaximum Weight: 5.9 kg. (13.5 lbs.)

10.5 mm(4-1/8”)

21 mm(8-1/4”)

10.5 mm(4-1/8”)

139.1 mm(54-3/4”)

| Indoor Lighting


Preferred Selections:

2LAMP TYPE

128T5L228T5L132L232L

128T5L

Most Frequently Ordered Catalog Numbers

5VOLTAGE

BLANK120

HVOLT

1203

SHIELDING

BLANK

BLANK

Catalog Numbers for Entire Product Offering(Pricing and lead times may be affected) ®

6BALLAST CONF.

BLANK2/1

GEB80SGEB90S

2/1

STEP 1: LUMINAIRE

EVT4 EVT4 Fluorescent

STEP 2: LAMP TYPE1

T5HO 154L 1 lamp, 54W 254L 2 lamps, 54W

T5 LAMPS

128T5L 1 lamp, 28W 228T5L 2 lamps, 28W

T8 LAMPS

132L 1 lamp, 32W 232L 2 lamps, 32W

STEP 3: SHIELDING

BLANK Clear Polycarbonate

STEP 4: DISTRIBUTION

WHITE BALLAST COVER

BLANK General Distribution

SPECULAR REFLECTOR

WD Wide Distribution

STEP 5: VOLTAGE

BLANK MVOLT 120V-277V 120 120V HVOLT2 347V-480V

1LUMINAIRE

EVT4

EVT44

DISTRIBUTION

BLANKWD

BLANK7

LAMP INSTALLED

BLANKLP830LP835LP850

LP830

STEP 6: BALLAST CONFIGURATIONS

BLANK One ballast 2/1 Two 1-lamp ballast

T5/T5HO BLANK 1.0 BF, PRS GEB80S3,4 .80 BF, step dimming (100%-50%) GEB90S5 .90 BF, PRS, step dimming

T8 BLANK 1.18 BF, IS GEB10IS .88 BF, IS GEB10ISL .76 BF, IS GEB10PS 1.00 BF, PS BSNP3,6 .87 BF, PS step dimming

STEP 7: LAMP INSTALLED

BLANK 85 CRI, 841 LP830 85 CRI, 830 LP835 85 CRI, 835 LP850 85 CRI, 850

STEP 8: OPTIONS

GLR Internal fast-blow fusing EL14DW9 Emergency lighting (1400 lumens) MSI__9.10,11 Wet location motion sensor with bracket, wired on/off MSI__D9,10,16 Wet location motion sensor with bracket wired for HI/WW dimming PE9,12 Photoelectric cell (button type) RIF1 Radio interference fi lter, one per fi xture B50CW6,9 Cold weather battery pack WLF Wet location fi tting (two outboard, top) WLFEND Wet location fi tting (one end) WLFEND2 Wet location fi ttings (both ends) WLFIN Wet location fi tting (two inboard, top) QMB13 Quick-mount ceiling bracket

STEP 8: OPTIONS

CMB13 Chain-mount bracket JSB13 Junction box snap bracket CS89 6’ white cord, 16/3, no plug, wet location CS88 6’ Brad Harrison 16/3 cord and straight blade plug set CS88L12 12’ Brad Harrison 16/3 cord and straight blade plug set HS Houseside shield UPS Uplight shield LCF113 Prismatic light control fi lm LCF213 Opaque light control fi lm LCF313 Striped light control fi lm STSL Stainless steel latches NOM NOM certifi ed

STEP 8: ACCESSORIES

VAPSMB Surface spring mount bracket VAPQMB Quick-mount ceiling bracketVAPCMB Chain-mount bracket VAPJSB Junction box snap bracket VAPPMP Pendant monopointVAPPMK Pendant monopoint kitVAPPMPB Pendant monopoint bracketHC3614,15 Wire hook and 36’ chain setRK1 T20BIT Hex base driver bit, Torx T20. Tamper resistant screws with center reject pinRK1 T20DRV Torx T20 screwdriver for use with tamper resistant screws with center reject pin___________________________________________1 To order fi xtures WITHOUT lamps, remove the “L” from the description (example:EVT4 132).2 Not available with 28T5 or 1-lamp 32T8.3 Available with 2-lamp unit only.4 Available with 54T5H0.5 Available with 28T5 only.6 Available with 32T8 only.7 Alternate lamp color need only be specifi ed if pre-installed lamps are provided.8 For additional options, consult factory.9 Must specify voltage.10 GEB10PS recommended.11 For mounting up to 8', specify MS18; for mounting up to 20', specify MS120.12 Not available with 480V.13 Accessories may be ordered as a separate catalog numbers.14 For stainless steel, specify STS (example: HC36 STS).15 Requires chain mount bracket (CMB option).16 For use with step dimming ballast.

8OPTIONS

GLREL14DWMSI___

MSI___D

GLR

Para obtener más información: Tel. +52 (81) 86614732 [email protected]

hl-2489 evt4 brochure - electric system

Documents