I N D U S T R I A L

Premium Additive Providing Synthetic Compressor Oil Performance in Mineral Oil

HiTEC® 5200Compressor Oil Additive Package

I N D U S T R I A L

Key Performance BenefitsHiTEC® 5200 synthetic compressor oil additive is designed for blending synthetic air compressor oils in Group III base stocks, providing performance comparable to oils using PAO. It has been developed to meet the most severe requirements of rotary screw air compressors.

HiTEC® 5200 additive contains ExxonMobil Chemical’s SYNESSTIC™ 5 Alkylated Naphthalene for improved sludge and deposit control, as well as a pour point depressant and an antifoam additive. This package provides simplicity to the oil blender.

HiTEC® 5200 finished fluid delivers the following benefits:

- Ashless- Extended oil change intervals, reducing servicing costs- Reduced air separator blocking, reducing maintenance- Excellent compatibility with seals, paints and the air line system- Low volatility, leading to low oil carry-over and cleaner

operation at lower cost- Increased oxidation protection- Superior thermal stability- Strong wear protection- Excellent air and water separation- Strong corrosion protection- Field trial data available

Recommended DosageHiTEC® 5200 additive treats at 16.90% wt. for use in blending rotary screw air compressor oils. Treat-rate may vary depending on base stock.

Typical CharacteristicsAppearance: Clear amber liquidDensity at 15°C, g/ml: 0.913Density, lbs/gal: 7.62Specific Gravity at 15.6/15.6°C: 0.915Flash Point, °C (PMCC): 120 min.Kinematic Viscosity at 100°C, mm²/s: 5.6Kinematic Viscosity at 40°C, mm²/s: 35

Handling InformationMax Handling Temp: 60˚CShelf Life: 24 months at ambient temperature

HiTEC® 5200 Compressor Oil Additive PackagePremium Additive Providing Synthetic Compressor Oil Performance in Mineral Oil

© 2011. Afton Chemical Corporation is a wholly-owned subsidiary of NewMarket Corporation (NYSE:NEU). HiTEC® is a trademark of Afton Chemical Corporation. 07/11.

The information in this bulletin is, to our best knowledge, sure and accurate, but all recommendations or suggestions are made without guarantee since the conditions of use are beyond our control. Afton Chemical Corporation and its affiliates disclaim any liability incurred in connection with the use of these data or suggestions. Furthermore, nothing contained herein shall be construed as a recommendation to use any product in conflict with existing patents covering any material or its use.

HiTEC® 5200 Field Trials - Varnish/Deposit Free Rotors

HiTEC® 5200 field trials - Gate Rotor Discharge Bearing

H5200 Sludge and Oxidation Comparison Against Various Compressor Formulations

RPVO

T (m

inut

es)

Slud

ge (m

g/10

0ml)

ASTM

D-2

070A

200

180

160

140

120

100

80

60

40

20

0

1600

1400

1200

1000

800

600

400

200

0HiTEC® 5200 Additive A Additive B Additive C Additive D Additive E