hitchins swimming pool

9
Hitchins Product Presentation Is a special blend of cement, quartz sand and multiple activating chemical in powder form. Upon application the chemical will react to form insulable crystals that penetrate deep into the concrete. Type : Crystalline, Integral Consumption : 1 x coating @ 1,0 kg/ m² Two component cementitious waterproofing system that has excellent flexibility and strength. It is used in situation where movement or cracking of the substrate is occuring or anticpated. Type : Cementitious membrane Consumption : 2 x coating @ 1,0 kg/ m² FORMDEX PLUS: FORMDEX UNIFLEX: SWIMMING POOL (SUSPENDED STRUCTURE)

Upload: datra-internusa

Post on 06-Mar-2016

271 views

Category:

Documents


3 download

DESCRIPTION

Double Protection Waterproofing for suspended swimming pool

TRANSCRIPT

Page 1: Hitchins Swimming Pool

Hitchins Product Presentation

Is a special blend of cement, quartz sand and multiple activating chemical in powder form. Upon application the chemical will react to form insulable crystals that penetrate deep into the concrete. Type : Crystalline, Integral

Consumption : 1 x coating @ 1,0 kg/ m²

Two component cementitious waterproofing system that has excellent flexibility and strength. It is used in situation where movement or cracking of the substrate is occuring or anticpated.

Type : Cementitious membrane Consumption : 2 x coating @ 1,0 kg/ m²

FORMDEX PLUS:

FORMDEX UNIFLEX:

SWIMMING POOL

(SUSPENDED STRUCTURE)

Page 2: Hitchins Swimming Pool

Hitchins Product Presentation

APPLICATION PROCEDURE

§  All surfaces to be waterproofed shall be cleaned by wire brushing, scraping or any other suitable means to remove dirt, grease, mould, etc.

§  All concrete surface should be dampen prior to waterproofing application.

Surface Preparation:

§  All new concrete surfaces shall be cured for a minimum of 14 days before the Waterproofing can be applied.

Page 3: Hitchins Swimming Pool

Hitchins Product Presentation

Formdex Plus: §  Mixing: Add 5 part of powder to 2 part of clean water by volume, and

mix thoroughly for at least 3 minutes.

§  Mix only sufficient material that can be used up within its pot life (approx. 20 minutes).

§  Apply waterproofing slurry mix in 1xcoat @ 1.0 kg/m².

§  Allow 3 hours drying time between each coats.

Apply by brush of Formdex Plus, 1x coating

= Formdex Plus, 1.0 kg/m²

Page 4: Hitchins Swimming Pool

Hitchins Product Presentation

§  Mixing: Add 3 part of powder to 2 part of liquid by volume, and mix thoroughly with a mechanical mixer for at least 3 minutes.

§  Mix only sufficient material that can be used up within its pot life (approx. 60 minutes).

§  Apply waterproofing slurry mix in 2x coat @ 1.0 kg/m².

Formdex Uniflex:

§  Allow 3 hours drying time between each coats.

Apply by brush of Formdex Uniflex, 2x coating

= Formdex Uniflex, 2.0 kg/m²

= Formdex Plus, 1.0 kg/m²

Page 5: Hitchins Swimming Pool

Hitchins Product Presentation

= Formdex Uniflex, 2.0 kg/m²

DETAIL - INSTALLATION

= Formdex Plus, 1.0 kg/m²

Pekerjaan plester pelindung.

= Lapisan Finishing

Page 6: Hitchins Swimming Pool

Hitchins Product Presentation DETAIL - LIGHTING

= Formdex Plus, 1.0 kg/m² = Formdex Uniflex, 2.0 kg/m²

= Epoxy mortar

Page 7: Hitchins Swimming Pool

Hitchins Product Presentation DETAIL - PIPE PENETRATION

= Formdex Plus, 1.0 kg/m² = Formdex Uniflex, 2.0 kg/m²

= Epoxy mortar

Page 8: Hitchins Swimming Pool

Hitchins Product Presentation

Page 9: Hitchins Swimming Pool

Hitchins Product Presentation