FOR SALE!!!!HIRSCHMANN

FIXTURING SYSTEM 5000

FOR SINKING EDM

H8.811 - Clamping Block: List Price: $2,260 H5.50.66/2 –Surface Finder with Ball 2mm List Price: $1,160 H5.50.8 – Aligning Rule List Price: $1,060 H5.50.9 – Aligning Gauge List Price: $1,080 H5.51.11 – Minifix Pallet (set of 30) List Price: $ 300 H5.51.15 – Minifx F Holder List Price: $ 460 H5.51.16 – Minifix V Holder List Price: $ 460 H5.50 – x 2 E Pallet (50 sq.) List Price: $ 280 H8.11.10 – Pneumatic Tool Clamper List Price: $4,260 H5.51.1 x 2– Minifix Stainless Pallet Holder List Price: $ 820 H5.62.25 x 2 – Magazine Fork List Price: $ 410--------------------------------------------------------------------------------------------- Total List Price :$14,060 40% Package Deal Discount - $5,624--------------------------------------------------------------------------------------------- Total Selling Price: $8,436

Tooling Set Includes :

H 5.50.8 -Test Bar

For aligning and checking the axis and radial position of the mounted tool clampers, and for concentricity and

system checks

H 5.50.9 Aligning Gauge For aligning and checking the tool and pallet clampers in the X/Y –

direction, and for checking the quill/pallet clamper in the center direction.

H5.51.11 Minifix Pallet (Set of 30-Rust Proof)Aluminum, x 20 mm (0.787”), with reference point, for electrodes of copper and graphite.

For attachment on the electrode blank by single-package system (glue), e.g. H 50 K. A fastening thread M 6 with a length of approx. 12 mm (0.472”) is drilled into the electrode through

the central hole. The pallet glued to the electrode is fastenedto the holder precisely and frictionally by means of the central

screw, under consideration of the reference points.Transmission of the current by the central screw

H 5.51.1 Minifix Stainless Pallet Holder - ShortFor precise and angular fixing of the MINIFIX and MINIFIXplus electrodes, pallets and holders.

Indexing in precision-ground centering Vee blocks. With internal flushing and external flushing.The central draw spindle has a continuous flushing hole. Repetitive accuracy of the pallet

(same holder) l 0.005 mm (0.0002”) Changing accuracy (holder-holder) ± 0.005 mm (0.0002”)Same length for all holders ± 0.005 mm (0.0002”)

H 5.50.66/2 Ball-type Surface Finder

For determining the position of the work piece.125 mm (4.920”) long, with hardened steel ball,

diameter 2+0.0 – 0.0/02 - 05 mm (0.078”).

H 5.50 PalletFor copper electrodes up to x l 75 mm (2.952”)

for graphite electrodes up to x l 100 mm (3.937”), milled on H 8.811. Inductively hardened centering Vee blocks and Z-

supports. Internal flushing through the clamping journal and external flushing

connection.Weight 0.5 kg (1.1 lbs)

The pallet is supplied without clamping journal.

H 5.51.15 F-HolderStainless steel, nitrided with reference point. For fixturing of small flat electrodes as e.g. small

sheet metal or rod electrodes up to 5 x 12 mm (0.196” x 0.472”).H 5.51.16 V-Holder

Stainless steel, nitrided with reference point. For fixturing of small electrodes up to x l10 mm (0.393”).

H 8.11.10 Tool Clamper (without MINIFIXplus)Compressed air and dielectric are supplied from above.The rear of the clamper is ground as an alignment surface parallel to the centering Vee blockPositioning and repetitive accuracy 0.002 mm (0.00008”) / Clamping force (clamper without MINIFIXplus) 2500 NClamping force (clamper with MINIFIXplus) 1500 N / Permissible electrode weight 100 kg (220.5 lbs)Permissible working current 120 A / Compressed air, min. 6 bars / Weight 2.15 kg (4.74 lbs)

Magazine Fork

H 8.811 Pallet ClamperWith four precision-ground contact surfaces, also used for the alignment on

the machine (the dimension from the center to the contact surface is engraved). Positive clamping.

Positioning accuracy 0.002 mm (0.00008”)Clamping force 10000 N / Weight 3.5 kg (7.72 lbs)