hinweis / note / notice€¦ · optionaler potentialausgleich mit 2,8 mm flachstecker optional...
TRANSCRIPT
-
Modul T568A 130910-I
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | GermanyTel. +49 7702 533-0 | Fax +49 7702 533-433Montageanleitung siehe/Mounting instruction see/Notice de montage voir www.metz-connect.com
Modul T568B 130910-I-B1
Schirmgeflecht 5 mm über den Kabelmantel aufbringen.Wrap the braided shield 5 mm over the cable sheath.Enrouler le blindage tressé 5 mm autour du gainage.
max. 30 mm max. 1.181 in.
ca. 5 mmabout 0.2 in.
Keystone T568A/T568B 130910KI Anschlussbelegung / PIN assignments Affectation des fils aux contacts
PIN Nr. / No. / contact no. T568A T568B
1 WH-GN WH-OG2 GN OG3 WH-OG WH-GN4 BU BU5 WH-BU WH-BU6 OG GN7 WH-BN WH-BN8 BN BN
30 mm 1.181 in.
5 mm 0.197 in.
Montagehinweis für den Installateur
Mounting note for the installer
Instructions d‘installation pour l‘installateur
E-DAT modul Cat.6A 8(8)E-DAT modul K Cat.6A 8(8)AWG 26/1 - 22/1, AWG 26/7 - 22/7
deenfr
HINWEIS / NOTE / NOTICEAnschlussfehler vermeiden!Vor dem Anschluss Montageanleitung sorgfältig lesen!Avoid connection errors!Read installation instructions carefully before connecting!Eviter des erreurs de raccordement !A lire attentivement avant de procéder au raccordement !
2BN
WH-BN
WH-OG OG
3
WH-BU BU
GNWH-GN
Kabelmontage T568ACable Termination T568AInstallation d’un câble T568A
deenfr
1 cut
Kabelmontage T568BCable Termination T568BInstallation d’un câble T568B
deenfr
1 cut
2BN
WH-BN
WH-GN GN
3
WH-BU BU
OGWH-OG
8972
/899
379
WARNUNG / WARNING / AVERTISSEMENT
Achtung!Ausstecken (Ziehen des RJ45-Steckers) nur bei zuvor ausgeschaltetem Gerät ohne Spannung. Ausste-cken, insbesondere wiederholtes Ausstecken unter Spannung (bei Verwendung von Power over Ether-net PoE) kann zu Schäden an den Kontakten der RJ45-Steckverbindung führen.
Attention!Before unplugging the RJ45 plug make sure that the device is switched off and is no longer energised. Unplugging, particularly repeated unplugging of an energised device (when using Power over Ethernet PoE) may damage the contacts of the RJ45 plug connection.
Attention!Débrancher la fiche RJ45 seulement après avoir éteint l‘appareil et l‘avoir mis hors tension. Un débranchement sous tension, surtout répété, peut causer des dommages aux contacts de la connexion RJ45 en cas d‘utilisation Power over Ethernet (PoE).
de
en
fr
HINWEIS / NOTE / NOTICE
Zusätzliche Informationen und wei-terführende Dokumentationen stehen zum Download unter www.metz-connect.com für Sie bereit.
E-DAT modul Cat. 6A 8(8) Buchse T568A
130910-I
E-DAT modul Cat. 6A 8(8) Buchse T568B
130910-I-B1
E-DAT modul K Cat. 6A 8(8) Buchse
130910KI
More detailed information and documentation are available as download at www.metz-connect.com
E-DAT modul Cat. 6A 8(8) Jack T568A
130910-I
E-DAT modul Cat. 6A 8(8) Jack T568B
130910-I-B1
E-DAT modul K Cat. 6A 8(8) Jack
130910KI
Des informations et documentations supplémentaires comme la fiche technique sont disponibles pour téléchargement sur www.metz-connect.com.
E-DAT modul Cat. 6A 8(8) Connecteur femelle T568A
130910-I
E-DAT modul Cat. 6A 8(8) Connecteur femelle T568B
130910-I-B1
E-DAT modul K Cat. 6A 8(8) Cennecteur femelle
130910KI
de en fr
http://www.metz-connect.com/de/products/130910-Ihttp://www.metz-connect.com/en/products/130910-Ihttp://www.metz-connect.com/fr/products/130910-Ihttp://www.metz-connect.com/de/products/130910-I-B1http://www.metz-connect.com/en/products/130910-I-B1http://www.metz-connect.com/fr/products/130910-I-B1http://www.metz-connect.com/de/products/130910KIhttp://www.metz-connect.com/en/products/130910KIhttp://www.metz-connect.com/fr/products/130910KI
-
4
5
6
KabelmontageCable TerminationInstallation d’un câble
deenfr
cut flush
7
Kabelmontage Keystone T568ACable Termination Keystone T568AInstallation d’un câble Keystone T568A
Kabelmontage Keystone T568BCable Termination T568BInstallation d’un câble T568B
de deen enfr fr
1 1cut cut
2 2BN
WH-BN
BN WH-BN
WH-OG OG WH-GN
GN
3 3
WH-BU BU
WH-BU BU
GNWH-GN
OGWH-OG
Demontage
Disassembly
Démontage
deenfr
Optionaler Potentialausgleich mit 2,8 mm FlachsteckerOptional potential equalisation with 2.8 mm flat plugCompensation de potentiel optionnelle par languette à 2,8 mm
Potentialausgleich
Potential equalisation
Compensation de potentiel
deenfr
1
2
3
METZ CONNECT GmbH | Im Tal 2 | 78176 Blumberg | GermanyTel. +49 7702 533-0 | Fax +49 7702 533-433Montageanleitung siehe/Mounting instruction see/Notice de montage voir www.metz-connect.com