hinges - tkc.co.uk · number of hinges door height (mm) * kg the number of hinges depends on the...

1 TEL 0161 336 3636

FREE FAX 0808 144 2422WEB WWW.TKC.CO.UKEMAIL [email protected]

Hinges

HINGESPlease Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

Technical Guide

Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

Date of print/release

July2017

IMPORTANT PLEASE NOTE:The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature.

We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations.

It is therefore the responsibility of the installer to check the corresponding manufacturer’s installation information and the manufacturer’s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements.

We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer’s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer’s technical information provided.

The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace.

Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.

3 TEL 0161 336 3636


Hinges

Blum

hin

ge

4 TEL 0161 336 3636


Clip-On 110 Degree BLUM Hinge With Integrated BLUMOTION Soft Close

Features:

• Integrated BLUMOTION soft close action • Opening angle: 110 degrees • Hinge cup depth: 13mm• Hinge cup diameter: 35mm• 3-dimensional adjustment• Tool-free door-to-carcass assembly

and removal• Each pack includes 2 hinges,

mounting plates, boss and arm cover caps and screws

Made of Steel

95BLUM200,110 Degree Hinge,

Integrated BLUMOTION Soft Close Action

HingesBLUM

CODE DESCRIPTION

95BLUM200 BLUM SOFT CLOSE HINGE - PACK OF 2

FIRA TestedDetails available on request

109

Hinge systemsCLIP top BLUMOTION / CLIP top – hinges ◀Overview – hinges ◀◀

Catalogue 2016/2017 • KA-120

Hinge applications Page Webcode CLIP top CLIP top Application Boss FixingBLUMOTION With spring Unsprung

▶▶ Angled application – standard

▶▶ Angled application – glass door

▶▶ Angled application – frame door

● With spring ○ Unsprung

▶▶ Overview – angled applicationsAngled application Nº 1–109 148

▶▶ Mounting platesMounting plate Mate-

rialHeight adjustment

Horizontal cam mounting plate 20/32 Steel Cam ±2 mm 186 186 187 187Horizontal cam mounting plate for dual application 20/32 Steel Cam ±2 mm 187Horizontal cam mounting plate 22/32 Zinc Cam ±2 mm 188 188Horizontal cam mounting plate 20/32 Zinc Cam ±2 mm 188INSERTA cruciform mounting plate 37/32 Steel Cam ±2 mm 189Cruciform cam mounting plate 37/32 Steel Cam ±2 mm 188 189Cruciform cam mounting plate for twin application 37/32 Steel Cam ±2 mm 189Cruciform mounting plate 37/32 Zinc Screws (two-part) ±2 mm 189 190Cruciform mounting plate 37/32 Steel Elongated hole ±2 mm 190Cruciform mounting plate 37/32 Steel Elongated hole ±3 mm 190 190 191Cruciform mounting plate for twin application 37/32 Steel Elongated hole ±3 mm 191Cruciform mounting plate 28/32 Steel Elongated hole ±3 mm 191Cruciform mounting plate 37/32 Zinc Elongated hole ±3 mm 191Angled spacer 37/32 Zinc +5° 192Angled spacer 37/32 Zinc –5° 192

Number of Hinges

Door

hei

ght (

mm

)

* kg

The number of hinges depends on the door weight and front height.

To achieve good stability, distances between hinges should be as large as possible.

Information on weight and height apply to a standard door width of 600 mm.

±5° angled application 164 DQDW6M ● ● ○

–15° III – angled hinge full overlay 166 DQDWVY ● ○

–30° III – angled hinge full overlay 168 DQDXLA ● ○

–45° III – angled hinge full overlay 170 DQDYAM ● ○

CRISTALLO angled appli-cation 172 ● ○

+45° angled hinge for glass doors 174 ●

+20° angled hinge for glass doors 176 ●

±5° angled application for glass doors 178 ●

+45° angled hinge with mini boss 180 ●

+20° angled hinge with mini boss 182 ●

±5° angled application with mini boss 184 ●

Hin

ge s

yste

ms

5 TEL 0161 336 3636


Hinges

Sile

nce

hing

es

6 TEL 0161 336 3636


HingesSILENCE

Mounting Details

CODE DESCRIPTION

95SILENCE005 105 DEGREE SILENCE HINGE WITH INTEGRATED SOFT CLOSING PISTON95SILENCE001A SILENCE HINGE PLATE 15mm95SILENCE001B SILENCE HINGE PLATE 18mm (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18mm95SILENCE001H SILENCE HINGE CAM PLATE 18mm95SILENCE001J SILENCE HINGE CAM EURO PLATE 18mm95SILENCE100 SILENCE HINGE CUP COVERS (100pcs per bag)95SILENCE101 SILENCE HINGE ARM COVERS (100pcs per bag)

Clip-On 105 Degree SILENCE Hinge With Integrated Soft Closing Piston

Features:

• SILENCE hinge with integrated soft closing piston• Opening angle: 105 Degree• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment

Made of Steel

95SILENCE00595 Degree Hinge

Integrated Soft Close

Cranking 0mm


7 TEL 0161 336 3636


HingesSILENCE

Mounting Details

CODE DESCRIPTION



Features:

• SILENCE hinge with integrated soft closing piston• Hinge cup depth: 11.5mm• Hinge cup diameter: 35mm• Side adjustment• Height adjustment• Depth adjustment

Made of Steel




8 TEL 0161 336 3636


HingesSILENCE

Mounting Details

CODE DESCRIPTION



Features:


Made of Steel




9 TEL 0161 336 3636


HingesSILENCE

Mounting Details

CODE DESCRIPTION



Features:


Cranking 0mm

Made of Steel




10 TEL 0161 336 3636


HingesSILENCE

SILENCE Hinge Plates & Cover Caps

SILENCE No. of hinges per door Determinating the number of Silence hinges to be used according to the door height and weight:

CODE DESCRIPTION

95SILENCE001A SILENCE HINGE PLATE 15MM95SILENCE001B SILENCE HINGE PLATE 18MM (NON-EURO)95SILENCE001D SILENCE EURO PLATE 18MM95SILENCE001H SILENCE HINGE CAM PLATE 18MM95SILENCE001J SILENCE HINGE CAM EURO PLATE 18MM95SILENCE100 SILENCE HINGE CUP COVER CAP - SOLD AS PACK OF 10095SILENCE101 SILENCE HINGE ARM COVER CAP - SOLD AS PACK OF 100

95SILENCE001HSilence Hinge Cam Plate 18mm

95SILENCE001DSilence Euro Plate 18mm

11 TEL 0161 336 3636


Hinges

Titu

s +

hing

es

12 TEL 0161 336 3636


HingesTITUS +

Features:

• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST-i• Damping integrated in the hinge cup• Easy assembly and disassembly• Adjustment of the damping force

Cranking 0mm

Side adjustment +3 / -1mm

Height adjustment +2 / -2mm

Depth adjustment +5 / -1.5mm

ST-i110 Degree Soft Close Hinge

CODE DESCRIPTION

95LAMA60 ST-i 110 DEGREE INTERGRATED SOFT CLOSE HINGE

Made of steel

Mounting Details

13 TEL 0161 336 3636


HingesTITUS +

Features:

• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on

Cranking 18mm

Side adjustment +3 / -0.5mm


Depth adjustment +4 / -0mm

Basic110 / 45 Degree Slide-On Hinge

CODE DESCRIPTION

95LAMA05 BASIC CLIP-ON 110/45 DEGREE HINGE

Mounting Details

Made of steel and plastic

14 TEL 0161 336 3636


HingesTITUS +

Features:

• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST

Cranking 18mm




ST110 / 45 Degree Clip-On Hinge

CODE DESCRIPTION

95LAMA08 ST SLIDE-ON 110/45 DEGREE HINGE

Mounting Details

Made of steel and plastic

15 TEL 0161 336 3636


HingesTITUS +

Cranking 0mm

Features:

• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on




Basic110 Degree Slide-On Hinge

CODE DESCRIPTION

95LAMA01 BASIC SLIDE-ON 110 DEGREE HINGE

Mounting Details

Made of steel

16 TEL 0161 336 3636


HingesTITUS +

Features:

• Opening angle: 110°• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: ST

Quick and practical assembley of the hinge on the mounting plate by pressing gently on the rear part of the hinge arm

One button disassembly




ST110 Degree Clip-On Hinge

CODE DESCRIPTION

95LAMA02 ST CLIP-ON 110 DEGREE HINGE

Mounting Details

Made of steel

Cranking 0mm

17 TEL 0161 336 3636


HingesTITUS +

Features:

• Opening angle: 135°-165°• Drilling diameter for hinge cup: 35mm• Drilling depth: 12mm• Hinge on plate mounting system: ST

Enables better accessibility into cabinet interior due to the wider opening angle

Opening angle can be easily adjusted by rotating the appropriate screw on the hinge arm




ST170 Degree Clip-On Hinge

CODE DESCRIPTION

95LAMA03 ST CLIP-ON 170 DEGREE HINGE

Mounting Details

Made of steel and zinc

Cranking 0mm

18 TEL 0161 336 3636


HingesTITUS +

Cranking 0mm

Features:

• Opening angle: 135°-165°• Drilling diameter for hinge cup: 35mm• Drilling depth: 12mm• Hinge on plate mounting system: Slide-on

Enables better accessibility into cabinet interior due to the wider opening angle

Opening angle can be easily adjusted by rotating the appropriate screw on the hinge arm




Basic170 Degree Slide-On Hinge

CODE DESCRIPTION

95LAMA04 BASIC SLIDE-ON 170 DEGREE HINGE

Mounting Details

Made of steel and zinc

19 TEL 0161 336 3636


HingesTITUS +

Mounting Details

Cranking 0mm

Features:

• Drilling diameter for hinge cup: 35mm• Drilling depth: 11.5mm• Hinge on plate mounting system: Slide-on

Standard drilling for hinge and mounting plate

Hinge integrated adjustment



BasicFor Pie-Cut Corner Cabinet

CODE DESCRIPTION

95LAMA14 BASIC PIE CUT CORNER HINGE

Mounting Details / Drilling Details / Adjustments

Drilling Details

Any basic mounting plate of thickness. D=0 can be used.

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing.

Adjustments


Cup made of steel, arm made of zinc

20 TEL 0161 336 3636


HingesTITUS +

STMounting Plates

FOR ST FREE, ST PLUS & ST CONCEALED HINGES

Steel mounting plates Drilling Pattern Dimensions

CODE DESCRIPTION

95LAMA02A CLIP ON PLATE 15MM - NON EURO SCREW 95LAMA02B CLIP ON PLATE 18MM - NON EURO SCREW 95LAMA02C EURO CLIP ON PLATE 15MM - EURO SCREW 95LAMA02D EURO CLIP ON PLATE 18MM - EURO SCREW

Made of steelHeight adjustment + / -2mm

Clip on plate - Non Euro screw

95LAMA02A / 95LAMA02B

Euro clip on plate - Euro screw

95LAMA02C / 95LAMA02D

21 TEL 0161 336 3636


HingesTITUS +

BasicMounting Plates

FOR BASIC CONCEALED HINGES

Steel mounting plates Drilling Pattern Dimensions

CODE DESCRIPTION

95LAMA01A SLIDE ON CLIP PLATE 15MM95LAMA01B SLIDE ON CLIP PLATE 18MM95LAMA01C EURO SLIDE ON PLATE 15MM95LAMA01D EURO SLIDE ON PLATE 18MM

Made of steelHeight adjustment + / -2mm

Slide on plate 95LAMA01A / 95LAMA01B

Euro slide on plate 95LAMA01C / 95LAMA01D Mounting plate

thickness

22 TEL 0161 336 3636


HingesTITUS +

Concealed Hinge Parts

Concealed HingesInformation

Note: The drawing shows the ST plus hinge on a cam adjustable mounting plate

1. Hinge cup2. Hinge arm3. Closing mechanism4. Inner link5. Outer link6. Axis

7. Holes for fixing screws8. Side adjustment screw9. Height cam adjuster10. Depth cam adjuster11. ST time-saving mounting system12. Mounting plate

23 TEL 0161 336 3636


HingesTITUS +


By Choosing the Hinge of Appropriate Cranking

By Choosing the Mounting Plates of Appropriate Thickness

Door Clearance and Gap

HOW TO ACHIEVE THE DESIRED DOOR OVERLAY?

Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:

To achieve the desired overlay (X) while using a determined drilling distance (K), a mounting plate of appropriate thickness (D) must be chosen from the enclosed table

The door clearance (F>Fmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend upon the cup drilling distance (K), door thickness (V) and type of hinge. The minimum clearance scale can be found in the catalogue. When using on double doors with one party-wall the door clearance must be twice as large (F>2Fmin).

Full overlay Use a hinge with 0mm cranking

Cabinet side Door

24 TEL 0161 336 3636


HingesTITUS +


ST Time Saving System

Slide On System

HOW TO ASSEMBLE THE HINGE AND THE MOUNTING PLATE?

The door is assembled on the cabinet side simply by fixing the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm. For disassembly press the button on the rear of the hinge arm.

* ST free series

* ST plus series

* ST series

* Basic series

The hinge is assembled by sliding the hinge arm over the mounting plate. The lower part of the horizontal set up screw must fit correctly into the groove on the mounting plate. After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

Assembly

Disassembly

25 TEL 0161 336 3636


HingesTITUS +


Concealed Hinges with Ø 35mm Hinge Cup Diameter

HOW MANY HINGES PER DOOR?For the furniture user’s safety please use the appropriate number of hinges so that thedoor height or weight does not exceed that shown below.

Check the enclosed specifications for the number of required hinges per door by considering both height and weight. In case of doubt please contact Titus or your local distributor.

* ST series

* Basic series

* Special hinges

26 TEL 0161 336 3636


HingesTITUS +


By Rotating the Appropriate Screws

By Temporarily Releasing the Fixing Screw

SIDE ADJUSTMENT

The side adjustment is made by rotating the appropriate screw on the hinge arm.

* ST plus series

* ST series

* Basic series

* Miniprimat series

* Wide angle hinge

For side adjustment:

1. Release the fixing screw2. Make the necessary adjustment by

rotating the appropriate screw3. Tighten the fixing screw

Without releasing the fixing screw no side adjustment is possible.

The side adjustment is indespensable to align the door with the side of the cabinet thus allowing perfect lifetime opening and closing of the door.

27 TEL 0161 336 3636


HingesTITUS +


By Rotating the Cam Adjuster

Manual Adjustment by Releasing the Adjustment Screw

By Releasing the Fixing Screws of Mounting Plate

HEIGHT ADJUSTMENT

The height adjustment is made by rotating the cam adjuster on the mounting plate.

For height adjustment the adjustment screw has to be temporarily released during manual adjustment.

For height adjustment the two mounting plate fixing screws have to be temporarily released while making the adjustment manual.

* ST free, ST plus and ST series with cam adjustable mounting plate

* ST free, ST plus and ST series with horizontal mounting plate

* ST free, ST plus and ST series with cam adjustable cruciform mounting plates

* Basic series

* Miniprimat series

* Wide angle hinge

Height adjustment is necessary to achieve perfect vertical door position that emphasises the accuracy of manufacture.

28 TEL 0161 336 3636





DEPTH ADJUSTMENT

The system enables easy adjustment of the door depth to assure that the door fits well on the side of the cabinet.

The adjustment is made by rotating the cam adjuster on the hinge arm.

The depth adjustment is made by temporarily releasing the adjustment screw (ST series) or fixing screw (Basic series). After the adjustment is made the screw has to be re-tightened.

* ST free series

* ST plus series

* ST series

* Basic series

* Miniprimat

HingesTITUS +

29 TEL 0161 336 3636


HingesTITUS +

Adjustment InstructionsST-i 110 Degree Soft Close Hinge with Integrated damping

1. The damping force of ST-i hinge is factory pre-set to the maximum damping value.

2. To decrease the damping force, slide the damping switch off.

3. When the damping switch is in the ‘OFF’ position, the ST-i hinge uses 33% of it’s damping force.

4. To increase the damping force again, slide the damping switch on.

The damping switch in a pre-set ‘ON’ position

1. Lift the damping activator

2. Slide the damping switch to ‘OFF’ position

The damping switch in ‘OFF’ position

Slide the damping switch to ‘ON’ position

30 TEL 0161 336 3636


Contact usTelephone 0161 336 3636Fax 0161 336 3638Free-Fax 0808 144 2422Email [email protected] www.tkc.co.ukOrder www.trade.tkc.co.uk

AddressUnit 3Cranberry DriveDentonManchesterM34 3UL

Area Sales

Scotland 07770 017422North East 07766 021114Yorkshire 07976 643485North West 07584 241838Merseyside, North Wales & West Cheshire 07970 923474East Midlands 07770 017440West Midlands 07899 948786South West & South Wales 07799 320910London & Home Counties (North) 07823 442668London & Home Counties (South) 07792 078830Northern Ireland 07436 160980

All goods are sold subject to our Terms and Conditions of Sale which are available upon request.

hinges - tkc.co.uk · number of hinges door height (mm) * kg the number of hinges depends on the...

Documents