hilti’s team of technical support · to consult directly with a team member regarding our anchor...
TRANSCRIPT
Hilti, Inc.
7250 Dallas Parkway, Suite 1000 Plano, TX 75024
1-800-879-8000
www.hil ti.com
The following excerpt are pages from the North American Product Technical Guide, Volume 2: Anchor Fastening, Edition 16. Please refer to the publication in its entirety for complete details on this product including data development, product specifications, general suitability, installation, corrosion and spacing and edge distance guidelines. US: http://submittals.us.hilti.com/PTGVol2/ CA: http://submittals.us.hilti.com/PTGVol2CA/ To consult directly with a team member regarding our anchor fastening products, contact Hilti’s team of technical support specialists between the hours of 7:00am – 6:00pm CST. US: 877-749-6337 or [email protected] CA: 1-800-363-4458, ext. 6 or [email protected]
Adhesive Anchoring Systems
3.2.2 The Hilti HIT System
62 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2016
To address the various conditions found on today’s construction projects, Hilti offers the most complete selection of adhesive anchoring products. We call it the HIT Portfolio. No matter what application you have on the jobsite, Hilti has a product for you.
EveryproductintheHITPortfoliowasdevelopedusingthesamestringentstandardsandisbackedbytheexperienceofthecompany that brought cartridge adhesive anchor systems to the world...Hilti.
3.2.2.1 Hilti Adhesive Anchoring Systems
* When used with SafeSet™ ** Can only be used with HIT-Z rod
Seismic(perICC-ES)
ICC-ES(InternationalCodeCouncil)
Hilti SafeSet™ Technology eliminates the most load-affecting and time-consuming step in the installation process: manually cleaning the hole before injection of the adhesive.
Adhesive Anchors Base Material Approvals Drilling Method Fastening Elements Twork@ 68°F Tcure@ 68°F
Application TemperatureHIT-HY 200
Fast cure
Maximum productivity and reliability with no manual hole cleaning required.*
HY 200 A 7 min 45 min
HY 200 R 15 min 1.5 hr
14° F* to
104° F
*41° F when using HIT-Z anchor rod
HIT-RE 500 V3Slow cure
The industry’s leading epoxy adhesive anchor system.
15 min
6.5 hr
23° to
104° F
HIT-HY 100Fast cure
Solid performance for everyday applications.
5 min
30 hr
14° to
104° F
HIT-RE 100Slow cure
Solid performance for day-to-day applications.
30 min
12 hr
41° to
104° F
HIT-HY 70Fast cure for masonry
The ideal anchor designed for virtually all masonry.
4 min
1.5 hr
23° to 104° F
41° to 104° F
HIT-HY 10+Fast cure
The fast and economical solution when no approvals are required.
4 min
1.5 hr
32° to
104° F
**
Adhesive Anchoring Systems
The Hilti HIT System 3.2.2
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2016 63
Applications
•Post-installedrebarconnectionsforconcrete slab, column or wall extensions
•Heavy-dutyanchoringincrackedoruncracked concrete, e.g. for steel beams, columns, manufacturing equipmentorledgerangles
•Facadeinstallation,steelandmetalconstruction, installation of railings and safety barriers
What does Safe Set™ mean?
Hilti Safe Set™ Technology improves reliability because the specified application is being better performed on the jobsite just as it has been designed to in the plans.
A small step for engineers. And a giant leap forward for your next design. Now you can design anchor rod and post-installed rebar connections with more confidence.Inadequatelycleaningholesduringinstallationcanreducetheperformanceofconventionalchemicalanchorsystemssignificantly.HiltiSafeSet™Technology eliminates this factor almost entirely – in both cracked or uncracked concrete and with anchor rods or post-installed rebar.
Hilti proudly presents the HIT-HY 200 System.
An
ch
ori
ng
HIT-HY 200 and HIT-Z Rod(no cleaning)HIT-HY 200, TE-CD or TE-YD Hollow Drill Bits with VC 20/40 vacuum and HAS/HIT-V Rod (self-cleaning)HIT-HY 200, standard drill bits and HAS/HIT-V Rod (traditional cleaning)
Re
ba
r
HIT-HY 200, TE-CD or TE-YD Hollow Drill Bits with VC 20/40 vacuum and rebar (self-cleaning)HIT-HY 200, standard drill bits and rebar (traditional cleaning)
HIT-HY 200 Application Ranges
3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/4"
#3 #4 #5 #6 #7 #8 #9
Safe Set™
Safe Set™
Safe Set™
2015 IBC®
Compliant Anchor
Adhesive Anchoring Systems
3.2.2 The Hilti HIT System
64 Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2016
No manual cleaning required. Set anchors and rebar reliably.
Hilti HIT-HY 200 Injectable Adhesive with Safe Set™ Technology
Potential effects of no hole cleaning
The new Safe Set™ System featuring HIT-HY 200 allows a fastening point to take high loads, as though the hole were cleaned using traditional installation methods.
When a threaded rod or rebar is set with conventional injection adhesive, the load it’s capable of taking may be very lowiftheholeisinadequatelycleanedafterdrilling.TheHiltiSafe Set™ system eliminates a cleaning step while still providing excellent load values.
Without hole cleaning using the Hilti HIT-Z Rod
With standard hole cleaning or self-cleaning Hilti Hollow Drill Bit with VC 20/40 vacuumLo
ad [l
b]
Displacement [in]
No hole cleaning
With hole cleaning
Load
[lb]
Displacement [in]
It’s no secret that adhesive anchors encounter varying jobsite conditions. Hilti injection technology (HIT) is featured in our lineup of quality products to combat this issue. With Hilti Safe Set™ Technology, which includes either Hollow Drill Bits with the VC 20/40 Vacuum Cleaner or HIT-Z Anchor Rods, we are taking another giant leap forward by removing a step of the installation process entirely.
Adhesive Anchoring Systems
The Hilti HIT System 3.2.2
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I Anchor Fastening Technical Guide 2016 65
� HIT-HY and HIT-RE foil packs
The HIT adhesives are supplied in the revolutionary foil packs (excluding HIT-ICE)
• Integratedpiercingdeviceinfoilpacks for self-opening convenience — nocuttingrequired
• Thefoilpackreduces waste up to 70% when compared to conventional hard cartridges
• HIT-ICEallowseasyhandlingevenwith heavy winter gloves by using co-axial hard cartridges and large twist off caps
Most foil pack cartridges come in sizes:
• 11.1 oz (330 ml)
• 16.9 oz (500 ml)
• 47.3 oz (1400 ml)
Contact your Hilti representative for more information.
� Foil pack holder
The foil pack holder is a reusable, hard cartridge
• Thefoilpackiseasilyinsertedintheholder and the holder in the dispenser,forquickeasyuse
• Theholdercanbeusedtostoreandtransport partially used foil packs
� HIT-HY or HIT-RE dispensers
• Fast,troublefreeinjectionswith a minimum of effort
• Designedandbuilttolast• HDE500BatteryDispenserfor
effortless dispensing