hilco webcast auction - microsoft · industrial webcast auction ... snk nissin model nb130p-3.5...

HilcoTM Industrial WEBCAST AUCTION

Bid online with:

www.hilcoind.comHilco™ Industrial

Complete Large Capacity Precision CNC Machining Facility

Tuesday, December 6th 10:00 AM ET

Wadsworth, Ohio

CNC Horizontal Boring & Milling Machines

Large Capacity LathesCNC Vertical Turret Lathe Inspection • Tool Room

Support Equipment

41” x 240”

2011

5-Axis

5-Axis2010

To schedule an auction, please call Hilco Industrial at 1-877-37-HILCO (44526)2

CNC HORIZONTAL BORING & MILLING MACHINES

CNC HORIZONTAL BORING & MILLING MACHINES2 – SNK NISSIN MODEL NB130P-3.5 5-AXIS CNC HORIZONTAL

BORING & MILLING MACHINES, S/Ns NN00096 & NN00095 (2011), Spindle Diameter: 5.12”, Table: 63” x 86.61”, Travels: X-137.8”, Y-98.42”, Z-62.99”, B-Axis: +/- 99999.999°, Spindle Speed: 5 to 2500-RPM, 50-Taper, with 60-Position ATC, Fanuc 16i-MB CNC Control, Daikin Oil Chiller

2 – SNK IKEGAI MODEL NB130P-3.5 5-AXIS CNC HORIZONTAL BORING & MILLING MACHINES, S/Ns NN00020 (2005) & NN00009 (2004), Spindle Diameter: 5.12”, Table: 63” x 86.61”, Travels: X-137.8”, Y-98.42”, Z-62.99”, B-Axis: +/- 99999.999°, Spindle Speed: 5 to 2500-RPM, 50-Taper, with 60-Position ATC, Fanuc 16i-MB CNC Control, Daikin Oil Chiller

1 – SNK IKEGAI MODEL NB130P-3.0 5-AXIS CNC HORIZONTAL BORING & MILLING MACHINE, S/N NN00043 (2007), Spindle Diameter: 4.3”, Table: 55” x 63”, Travels: X-78.75”, Y-63”, Z-57.09”, W-25.59”, B-Axis: 360°, Spindle Speed: 5 to 3000-RPM, 50-Taper, with 60-Position ATC, Fanuc 16i-MB CNC Control, Daikin AKZ328-X Inverter, Daikin AKZ568-T Oil Chiller, Chip Conveyor

1 – SNK IKEGAI MODEL NB110T 5-AXIS CNC HORIZONTAL BORING & MILLING MACHINE, S/N 30597V (2010), Spindle Diameter: 4.3, Table: 55” x 63”, Travels: X-78.75”, Y-68”, Z-57.09”, W-25.59”, B-Axis: 360°, Spindle Speed: 5 to 3000-RPM, 50-Taper, with 60-Position ATC, Fanuc 16i-MB CNC Control

Additional Photos & Complete Lot Catalog Available athilcoind.com/Sale/Imperial

2010

2011 5-Axis 5-Axis

5-Axis

5-Axis

CNC HORIZONTAL BORING MILLS • MILLING & BORING MACHINE • JIG MILLS

For more information, please visit us on the web at www.hilcoind.com/sale/Imperial 3

CNC HORIZONTAL BORING MILLS 1 – GIDDINGS & LEWIS MODEL G50-T 5” TABLE-TYPE CNC HORIZONTAL BORING MILL,

S/N 450-203-88 (1988), Table: 48” x 96”, Travels (Approx): X-96”, Y-79”, Z-72”, Spindle Travel: 36”, #50 Taper, Spindle Speed: 14 to 3000-RPM, Table Load Capacity: 35,000-Lbs, with G&L Numeripath CNC 8000 Control, Allen Bradley AC Servo Controls, 40-HP DC Spindle Drive, Power Drawbar, Coolant

1 – GIDDINGS & LEWIS MODEL PC50-TS 5” TABLE-TYPE CNC HORIZONTAL BORING MILL, S/N 445-107-81 (1981), Table: 48” x 72”, Travels (Approx): X-72”, Y-64”, Z-48”, Spindle Travel: 36”, #50 Taper, Spindle Speed: 14 to 3000-RPM, 30-HP DC Spindle Drive, Dyna Path Delta CNC Control

1 – GIDDINGS & LEWIS PC50 5” CNC HORIZONTAL BORING MILL, S/N 450-192-87 (1987), Fagor Control

1 – LUCAS MODEL 542B-120 5” CNC HORIZONTAL BORING MILL, S/N 30DC0507, Table: 84” x 120”, Dyna Path Control

MILLING & BORING MACHINE1 – MECOF MODEL CS10-VA BED-TYPE MILLING & BORING MACHINE, S/N 133062 (1990),

Traversing Column, Table: 236.2” x 40.5”, #50 Taper, Spindle Speed: 35 to 1130-RPM, Travels: X-169.3”, Y-38.2”, Z-47.2” to 67”, Swivel Range of Milling Head: 360° on (2) Faces, 25-HP Headstock Motor, 50” x 60” Rotary Table

JIG MILLS1 – DEVLIEG MODEL 4W72 CNC JIG MILL, S/N 870050, Table: 35” x 72”, Travels: X-72”, Y-57.5”,

Z-19.75”, W-16”, Spindle Diameter: 4”, #50 Taper, Spindle Speed: 70 to 417-RPM and 417 to 2500-RPM, with CNC Control, 30” x 40” Rotary Table, Chiller

1 – DEVLIEG MODEL 4K-72 SPIRAMATIC 4” HORIZONTAL BORING MILL, S/N 10093, Table: 40” x 72”, Rotary Table: 36” x 36”

CNC VERTICAL TURRET LATHE • TOOL ROOM


CNC VERTICAL TURRET LATHE1 – GRAY MODEL VMB-6 60” CNC VERTICAL TURRET LATHE, S/N 10049, 60” Table, Max

Swing: 68” (w/o Side Head), Min/Max Height Under Rail: 20” / 84”, Max Height Under Ram: 75” (L) / 90” (R), Max Height Ram Slide Below Saddle: 48” (w/ Additional Travel), GE Fanuc 18iT CNC Control, 100-HP Table Drive Motor

TOOL ROOM1 – TOS MODEL SU100 41” X 240” ENGINE LATHE, S/N 0443796 (1993), Spindle Hole:

4.1”, Spindle Speed: 2.24 to 450-RPM, with (2) Steady Rests, 39.25” 4-Jaw Chuck, Pow-er Carriage, 33-HP Spindle Drive Motor

1 – TOS MODEL SUS 80 33” X 138” ENGINE LATHE, S/N 0440824 (1980), Spindle Hole: 3.22”, Swing Over Carriage: 20.87”, Spindle Speed: 7.1 to 900-RPM, Inch/Metric Thread-ing, with (3) Steady Rests, QMS 900 DRO, 30-HP Spindle Drive Motor, 27.75” 4-Jaw Chuck

1 – DAEWOO MODEL A20 20” X 60” ENGINE LATHE, S/N 150090 (1979), Spindle Hole: 3”, with Steady Rest, 15” Diameter 3-Jaw Chuck

1 – BRIDGEPORT SERIES I 2-HP VERTICAL MILLING MACHINE, S/N 231725 (1982), 9” x 42” Power Feed Table, Acu-Rite DRO, 4” Riser

1 – RODGERS MODEL 1F 200-D-7210 200-TON HYDRAULIC HORIZONTAL WHEEL PRESS, S/N 1F200-1005, Head Travel: 108” (Approx)

1 – GIDDINGS & LEWIS MODEL CHIPMASTER 5’ X 17” RADIAL ARM DRILL, S/N N/A, Box Table

1 – GISHOLT MODEL 3L 24” X 54” TURRET LATHE, S/N 3355-12 (1966)1 – WELLS MODEL 1270 12” X 16” HORIZONTAL BAND SAW, S/N 728R1 – STENHOJ MODEL K930279/2 100-TON HYDRAULIC H-FRAME SHOP PRESS, S/N

N/A (2005)1 – BENTLEY 6” X 18” SURFACE GRINDER, S/N 78-146 (1980) 1 – BLUE M MODEL POM18 POWERMATIC LAB OVEN, S/N 1200 (1990), 2’ x 3’ x 5’ Over-

all Size1 – PRATT & WHITNEY MODEL 1513 12” VERTICAL SLOTTER, S/N 779 (1950)

33” x 138”

MACHINE TOOL ACCESSORIES • WELDING


MACHINE TOOL ACCESSORIES3 – COGSDILL ZX420-TC FACING &

GENERATING HEADS 1 – GIDDINGS & LEWIS 30” X 36” ROTARY

TABLE, S/N 040-1962-87, Power Clamp/Unclamp

1 – GIDDINGS & LEWIS 30” X 30” ROTARY TABLE, Power Clamp/Unclamp

1 – 60” X 60” ROTARY TABLE1 – TSUDAKOMA MODEL RNCV-801K 31.49”

DIAMETER ROTARY TABLE, S/N 011174, Center Height 20.87” (530 mm)

1 – PARLEC PARESETTER 220 TOOL PRESETTER, with Parlec MP500 DRO

QUANTITY OF ANGLE PLATES – Pairs of 47”W x 75”H x 34”D, 19”W x 70”H x 30” Rectangular, 12”W x 56”H x 20”D, 12”W x 36”H x 18”D, 18”W x 36”H x 17”DQUANTITY OF – Over (700) CAT 50 Tool Holders, Carbide Inserts, Tooling: Cutter Bodies, Collets, Extensions, Boring Bars, Taps, End Mills, Vidmar & Lista Storage Cabinets, Racks and Carts

Bid online with:

WELDING1 – ARONSON MODEL HD160A 20,000-LB WELDING POSITIONER, S/N 77119 (1970), 54” x 54”

Table, Inherent 9” Overlay, Max Load Torque: 192,000-Lb. In. Rotation / 336,000-Lb. In. Tilt1 – LINCOLN MODEL 300 SQUARE WAVE TIG WELDER (2006), HIGH FREQUENCY UNIT 1 – LINCOLN MODEL 500 MIG 250-AMPWELDER (1987)1 – MILLER MODEL 250 MIG 250-AMP WELDER, S/N KK263967 (1999)1 – MILLER PIPE WORX 400 WELDER, S/N ME020277G (2014), 400-Amp, Wire Feed, Torch

or

INSPECTION • CRANES • ROLLING STOCK • PLANT UTILITIES


CRANES1 – EMH 10-TON SINGLE GIRDER BRIDGE CRANE, S/N 112787,

Span: 75’ (Approx), 6-Way Remote Control1 – EMH 5-TON SINGLE GIRDER BRIDGE CRANE, S/N 112786,

Span: 75’ (Approx), 6-Way Remote Control1 – 2-TON X 15’ (APPROX) COLUMN MOUNTED JIB CRANE, 2-Ton

Electric Hoist, 2-Way Pendant 1 – 5-TON X 12’ (APPROX) COLUMN MOUNTED JIB CRANE, 5-Ton

Electric Hoist, 4-Way Pendant, Power Trolley 1 – POWER GRIP MODEL LB-2G MAGNETIC LIFT CRANE

ATTACHMENT, S/N 3311A, DC Volts 6VDC1 – CM CADY MODEL D648 6,000-LB. X 48” SHEET LIFTER, S/N

5995, Forks: 48”L x 26.75”W

ROLLING STOCK1 – 2007 INTERNATIONAL 4300 STAKE BED TRUCK,

VIN:1HTMMAAN97HS31816, Diesel Engine, 16,000-Lb Capacity1 – TOYOTA MODEL 7FGKU40 8,000-LB LPG FORKLIFT TRUCK,

S/N 63459-07 (2007), 187” Max Lift, Side Shift

PLANT UTILITIES1 – COMPAIR MODEL L75RS-13A 100-HP ROTARY SCREW TYPE

AIR COMPRESSOR, Order #2384215 (2013) 8,600-Hours Indicated1 – COMPAIR MODEL L22AC100 25-HP ROTARY SCREW TYPE AIR

COMPRESSOR, S/N D07-7733 (2010)1 – COMPAIR MODEL L18-100 20-HP ROTARY SCREW TYPE AIR

COMPRESSOR, S/N 142-16T (2004)1 – ZEKS MODEL 500HSFA400 REFRIGERATED COMPRESSED AIR

DRYER, S/N 551170, 300-PSIG, R404a Refrigerant, Programmable Control

2 – ZEKS MODEL ZK1 COMPRESSED AIR DRYERSALSO AVAILABLE – Air Receiver Tank, Filtration Unit

INSPECTION1 – BROWN & SHARPE 19” HITE-ICATOR

HEIGHT GAUGE, S/N 20-2951 – CADILLAC 10074 12” PLA-CHEK

HEIGHT GAUGE, S/N 15021G1 – PIN GAUGE SET, LOT OF ASSORTED

THREAD DIESQUANTITY OF Mitutoyo & Starrett Micrometers - Capacity 24” to 80”QUANTITY OF OD Micrometers up to 48”, Calipers up to 72”, Dial Gauges, Pin Gauges, Height Gauges, Precision Levels, Parallels, Steel Layout Plates, Granite Plates, V-Blocks

Partial Listing Only, Visithilcoind.com/Sale/Imperial

for Full Lot Catalog

PLANT & PRODUCTION SUPPORT • SALE INFORMATION


FURTHER INFORMATION• A 16% BUYER’S PREMIUM WILL BE CHARGED ON ALL ASSETS

WHEN PAYMENT IS MADE BY MEANS OF CASH, CASHIER’S CHECK, COMPANY CHECK (WITH BANK LETTER OF GUARANTEE) OR WIRE TRANSFER WITHIN 48 HOURS OF SALE CLOSE. AN 18% BUYER’SPREMIUM WILL BE CHARGED ON ALL ASSETS WHEN PAYMENT IS MADE BY CREDIT CARD (ACCEPTED FOR INVOICES OF $2000 OR LESS), OR WHEN PAYMENT IS RECEIVED AFTER 48 HOURS OF SALE CLOSE. AN 18% BUYER’S PREMIUMWILL BE CHARGED FOR ALL BIDSPOTTERPURCHASES WITH NO DISCOUNT FOR PROMPT PAYMENT. AUCTION WILL BE CONDUCTED IN ENGLISH, ACCEPTING U.S. CURRENCY ONLY.

• REMOVAL DEADLINE IS JANUARY 20TH WITH HOURS OF REMOVAL BETWEEN 8AM TO 4PM ET MONDAY THRU FRIDAY. BUYERS WITH ITEMS LEFT ON SITE AFTER DEADLINE ARE SUBJECT TO FINES OF $500 PER DAY.

Information contained herein deemed to be accurate at time of printing and subject to change. For updated information, please visit our

website at www.hilcoind.com for any changes to date, sale process, terms and conditions and list of available assets.

MACHINERY & EQUIPMENTKENPLANET+1248-419-1964•[email protected] INFORMATIONLESIAJOSEPH+1616-328-6892•[email protected]@HILCOGLOBAL.COMCUSTOMER SERVICE+1877-37-HILCO•+1616-732-1800•[email protected]

AUCTION DATETUESDAY, DECEMBER 6TH

10:00 AM ET LOCATION1785 WALL ROAD WADSWORTH, OH 44281 USAPREVIEWMONDAY, DECEMBER 5TH

9:00 AM – 4:00 PM ET OR EARLIER BY APPOINTMENTTO SCHEDULE AN EARLIER INSPECTION, PLEASE CONTACT KEN PLANET AT +1 248-419-1964 EMAIL [email protected]

WEBCAST AUCTION

PLANT & PRODUCTION SUPPORTMISCELLANEOUS SUPPORT EQUIPMENT Including: Hand & Power Tools, OTC Power Turn 50-Ton Gear Pull-er, Portable Keyway Cutter, Chain Storage Rack, Slings & Chains, Self-Dumping Hoppers, Hydraulic Jacks, Mag-netic Base Drills, Machine Mats, Steel Benches, Vises, Tool Chests, Pallet Jacks, Pallet Racking, Welder Acces-sories, Magnetic Roller, Clamps, Vises, Pedestal Grind-ers, Bronze Bushings Raw Material, Assorted Scrap Steel, Zep Wash Cabinets, and Much More

Bid Online at

OVER 35 OFFICES THROUGHOUT NORTH, CENTRAL & SOUTH AMERICA, EUROPE, MIDDLE EAST, ASIA, AUSTRALIA

HilcoTM Industrial WEBCAST AUCTION

HilcoIndustrial,LLCisadivisionofHilcoGlobal•Headquarters5RevereDrive,Ste.206•Northbrook,IL60062•AllrightsreservedHilcoIndustrial,LLCOhioAuctioneer&License:TimPfisterLicense#2011000029•OHLicense#2011000151•ILLicense#444.000215

PrintedinUSA•IMP5872•Pleasevisitourwebsiteatwww.hilcoind.comtoreviewourcompletetermsandconditions. A Hilco Global CompanyVested in your Success

Follow us on:Helps

WORKING FOR A BETTER TOMORROW

Terms of SaleA 16% buyer’s premium will be charged on all assetswhen payment is made by means of cash, cashier’s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close. An 18% buyer’spremium will be charged on all assets when payment is made by credit card (accepted for invoices of $2000 or less), or when payment is received after 48 hours of sale close. An18%buyer’spremiumwillbechargedforallBidSpotterpurchases with no discount for prompt payment. Everything will be sold to the highest bidder for cash, in accordance with the Auctioneer’s customary “Terms of Sale”, copies of which will be posted on the premises of the sale and subject to additional terms announced the day of sale. All items will be sold “as is, where-is” without any warranties, expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information herein contained. Bidders are encouraged to thoroughly inspect the items on which they intend to bid prior to sale. Absolutely no items will be removed until the day after the conclusion of the sale and payment is made in full. Subject to additions, deletions and prior sale. For updated information, please visit our website at www.hilcoind.com for any changes to date, sale process, terms and conditions and list of available assets.Payment: INVOICES WILL BE EMAILED WITHIN 24 HOURS AFTER THE AUCTION CLOSES. Payment is to be made to Hilco Industrial, LLC. Payment Options: VISA, Mastercard, Discover accepted – if invoice total is $2,000 or less; Wire Transfer; Certified Check; orCompany Check (with Bank letter of guarantee – see sample letter below). All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claim such exemptions. Please see complete terms and conditions on our website, www.hilcoind.com.

Sample Bank Letter(Bank Name) unconditionally guarantees payment to Hilco Industrial from (Company Name). This guarantee will be valid for purchases made at the Auction of Imperial Machine & Tool, LLC on December 6, 2016.

Complete Large Capacity Precision CNC

Machining Facility

Tuesday, December 6th • 10:00 AM ETWadsworth, Ohio USA

hilco webcast auction - microsoft · industrial webcast auction ... snk nissin model nb130p-3.5...

Documents