hightech in reach. products 2018 - · pdf filenew l3d mount from rehadapt more on pages 50...

Products 2018

www.rehadapt.com

Hightech in reach.

Dipl. Päd. Ulrich Ehlert - CEO REHAdapt Engineering

that‘s what mounting solutions should be like. Our customers‘s daily challenges are complex enough. This is a well-known fact to clients, carers and technology providers. That‘s why

we do everything we can to build solutions that make life simpler for all parties involved. Enhancing and expanding our modular sys-tem of mounting components leads to clever mounting solutions for each stage of a day. In everyday life with different caregivers in varying situations these mounts need to work reliably - and they do!

This is achieved through our unique service concept, more than a decade of experience in product design, a versatile system of com-ponents, high quality standards in manufac-turing and a holistic view on each and every individual challenge!

Simple,intuitive,reliable

Untroubledcommunication

Jesus Alejandro Reyes Sanchez (Alex) with his teacher Lisa Peterson

Julia Nickel with Rehadapt Engineer Marco Miftari

Anne Sophie happy with her new L3D mount from Rehadapt

more on pages 50 and 51

2

FS TS

Monty 3D

Floorstandspage 22

page 48

page 4

page 26

page 12Light 3D

Tablestands

M3D L3D

Our Solutions

Our Services

page 52

page 30

REHAdaptHightech in reach

vmsvirtual mounting solution

mediahub

componentshub

assessmentkits

componentshub

assessmentkits

Visit us on Facebook!facebook.com/RehadaptEngineering

Visit our homepagerehadapt.com

REHAdapt North America7619 A1A SouthSt. AugustineFL 32080

Tel: 904.687.0130Fax: 904.342.6278Email: [email protected]

REH∆dapt Engineering GmbH & Co. KGHeinrich-Hertz-Str. 104D-34123 Kassel

Tel: +49 561 220 717 0Fax: +49 561 220 717 99Email: [email protected]

3

Monty 3D product line -We offer a wide range of mounting possibilities for any kind of device onto any kind of wheelchair. Our system is easy to use and quick to adjust even without tools.

REHAdapt’s signature tube joints allow for full 360° adjustment in all dimensions. Available with Allen key screws or quick-shift levers.

Our range of base clamps ensure solid fixation to any manual or powered wheelchair: clamping onto the frame, to arm- or footrests, or underneath the seat.

Benefits of Monty 3D Products

Monty3D aircraft-grade alu-minum tubes have excellent mechanical properties and are perfectly round. That precision translates into maximum force fit at any clamp.

2.1.

3.

M3D

4

Our Universal Device Socket (UDS) includes our Quick Release system which allows for the safe device attachment within seconds. With a small footprint on the device, yet great sturdiness!

For the user’s transition in and out of the wheelchair, the mount can easily be swiveled into three positions: operation, transfer and parking.

Benefits of Monty 3D Products

5.4.

5

Frameclamps

Monty-3D T-Nut frame adapter for

C-Profile railing max. 16x6.5mm

Monty 3D frame clamp, for round fra-mes with diameters from 25 - 45 mm

Sleeves to support dif-ferent diameter wheel-chair frame tubing, to

apply in RKL25

Monty-3D frame adapter for Permobil UniTrack rail / double

T-Nut system.

M3D-RKL-E30

Frame-clamp for rec-tangular wheelchair

frame elements up to 30mm

and many more...

M3D-RKL-E30-70

Frame clamp for rec-tangular wheelchair frame elements from

30mm to 70mm

M3D-RKL-Permobil

Universal M3D-Per-mobil frame-adapter

M3DRKL-T

tangential clamps to mount to partially inaccessible tubes

M3D-RKL-T-Nut 16

M3D-RKL25-45

Sleeves14-23

M3D-RKL-Unitrack

▶see p. 42

Universal Device SocketsUDS

Universal Device Socket with screw

UDS-QS

Universal Device Socket with Quickshift lever

UDS-DC

UDS with dual clamping levers

▶see p. 38

Monty 3D Part OptionsM3D

6

Tube ConnectorsM3D-Uni

Universal joint with Allen key screw

M3D-Uni-QS

Adjustable with QuickShift lever.

M3D-Folding Joint

Connector to fold away the horizontal

tube.

▶see p. 39

Monty 3D Part Options

7

Swivel Units

Tubes

M3D-HD Tubekit

M3D S-Tubes

M3D Tubekit

Monty-3D upgrade kit to equip any M3D mount with a double tube.

Double-curved tubes for extra clearance in three sizes available

Monty-3D Standard tube kit, including 3 different tube lengths

▶see p. 41

▶see p. 37

Swing mount to positions operating/exiting/parked after lifting upward.

M3D Swivel Unit

Swing to three posi-tions - backlash-free. Clamping force adjustable.

M3D Swivel Unit S

M3D Tubes 22,2 mm diameter with the following lengths:

200 mm (8“)300 mm (12“)400 mm (16“)500 mm (20“)600 mm (24“)

Three Tube SolutionsM3D

MONTY-3D#11.1016

Wheelchair mount with Uni-versal Device Socket (UDS) for communication devices and notebooks. Fully 3D-adjustable joints. 3 pre-defined positions: operating, exiting and parked. A quick removal of the mount from the wheelchair is possible by easily pulling upwards, no unlocking required (may be user operable).Same assembly without UDS: #11.1000

MONTY-3D S#11.2016

Additional backlash-free swivel funtions (lever-locked). Same assemblywithout UDS: #11.2000

MONTY-3D QuickShift#11.2516Additional ergonomics, quick adjustment via ratchet-style handles, without tools. Same assembly without UDS: #11.2500

add aquick

handle

+upgrade

swiveljoint

+

MONTY-3D K R#11.3016

Fold-down wheelchair mount for communication devices on wheel-chairs, backlash-free.Exiting and parking of the device is possible by folding upwards and then to the side. For moun-ting on the right side.

MONTY-3D K L#11.3116

Fold-down wheelchair mount for communication devices or wheel-chairs, backlash-free.Exiting and parking of the device is possible by folding upwards and then to the side. For moun-ting on the left side.

Fold Down Mounts

8

„HD“ meansheavy duty... indicating strength and stiffness achieved by using double tubes. Result: not merely doubled, but multiplied strength!

M3D EyeControl HD is the perfect fit for your eye tracking or other device heavier than 3.2 kg / 7 lbs, or if the mount needs to be extra sturdy.

MONTY-3D EyeControl#11.2616

Easier device angle adjustment obtained through a double- clamp on the UDS.

MONTY-3D EyeControl HD#11.2916

Additional tube working as a supporting strut for more rigidity at higher load - per-fect solution designed for eye tracking and other devices heavier than 3.2 kg / 7 lbs.

add adoubleclamp

+add atwintube

+

over3.2kg7lbs

9

MONTY-3D Curved M#11.4700

228 mm (9“) x 660 mm (26“)With Quickshift Option: #11.4701

MONTY-3D Curved L#11.4710


MONTY-3D Curved XL#11.4720


Curved tubes in three sizes with option for quickshift joints and doubleclamp device sockets, to get extra off set from the mount attachment point without additional joints. Recommen-ded when the mount must be detachable from the wheelchair frame (e.g. with therapy trays or eye tracking devices).

Monty 3D Curved

„M“ „L“ „XL“

Extra clearance without extra effort

M3D

availablequickshift

option

10

MONTY-2R QS#11.4500Additional ergonomics, quick adjustment via ratchet-style handles, without tools.

MONTY-2R DC#11.4600

Easier device angle adjustment obtained through an additional double-clamp on the UDS.

Small yet very sturdy two-tube wheelchair mounts when a short mounting length is needed.

All two-tube bundles come with a backlash-free swivel function be-tween operating, exiting and parking position. Ideal for transport as the complete mount can be easily re-moved from the chair, with only the frame clamp remaining.

Ideal for children’s wheelchairs!

Small yet very sturdy:Two-tube solutionsfrom Rehadapt Extra clearance without extra effort

M3D Two Tube Solutions

MONTY 2R S#11.4000

Small yet very sturdy 2-Tube wheelchair mount with short mounting length. Ideal for children wheelchairs. Back-lash-free swivel function between operating, exiting and parking position. Ideal for transport as the complete mount can be easily removed from the chair, with only the frame clamp remaining.

add aquick

handle

add adoubleclamp

+ +

11

L3D

Benefits of Light 3D Products

Light 3D product line -The L3D line offers lean and sleek design while still providing the core values of REHAdapt mounts, e.g. unlimited 3D- adjustability of the joints and light and ultra strong aluminium tubes.

1.Superclamps - absolute freedom & flexibilityThe superclamp is well known in Assistive Technology for its great versatility, it clamps both to boards and round elements so it fits well to tables, armrests, bed rails or countless other things. We improved the original design to have a powerful link to the rest of the mount.

As quick to attach & detach, but less bulky is our new miniclamp. It works well for round or oval tubes of typical wheelchair-frame diameters. That makes it a great feature for switches!

Our baseclamps are unmatched in their clamping force, as they are custom-fit-ted and permanently attached to a speci-fic wheelchair part.

Three clamps to rule them all

Superclamp

Baseclamp

Miniclamp

for angular & round structures !

12

Benefits of Light 3D Products

Ready for any device that weighs less than 1.35 kg/3 lbs!With your L3D mount, you can combine holders for all devices that weighs under 1.35 kg/3 lbs: iPads, tablets or smart phones, dedica-ted communication aids or accessibility tools like switches, joysticks or mice. You name it - we hold it!

2.

3.By default Light-3D mounts economically end with a joint to chuck a pin from the device cradle („SLS= Spigot Link System“). The quick release socket can also be used for more comfort („UDS= Universal Device Socket“), please order products containing „U“ in the name.

All 3-tube mounts have a swivel-joint to easily swing the mount from operating into exiting or parking posi-tion

4.in use exiting

open13

You name it - we hold it!

Unique holding options

Moving the device out of the way.

Light 3D Part OptionsL3D

Tubes

JointsL3D 16/16 L3D 16/10 L3D 10/10

L3D 16/16 QS L3D 16/10 QS L3D 10/10 QS

L3D 16/16 joint with lever for quick handling

L3D 16/10 joint with Lever for quick loosing

L3D 10/10 joint with Lever for quick loosing

L3D 10/10 joint with screw



Ø3/8“ 10 mm Tube:4“6“8“10“12“

100mm150mm200mm250mm300mm

Ø5/8“ 16 mm Tube:4“6“8“10“12“14“16“

100mm150mm200mm250mm300mm350mm400mm

▶see p. 40

▶see p. 39

14

Light 3D Part OptionsiPad 2,3,4 iPad Air

iPad Pro 12,9“ iPad Pro 10,5“

iPad mini 1-3

iPad 5

Samsung Galaxy

iPad Air 2Defender case

Microsoft Surface4 Pro

Microsoft Surface3 Pro

Generic10“ tablets

Tab Tite

and manymore...

Adapters

Jelly Bean Buddy & Specs

▶see p. 33

FrameclampsL3D-16-

Base-R25 - 45

Frameclamp for wheelchairs with

Ø25-45mm tubes

L3D-16-Base-Superclamp

Frameclamp to clamp on tables, beds or tubes

Sleeves14-23

Sleeves for RKL25 to mount on

Ø14-23mm frames.

All Rehadapt frameclamps are fully compatible

to the L3D system!

▶see p. 42and many more...

L3D-10-Miniclamp

Frameclamp to clampto 13 - 35 mm tubes

15

Light 3D wheelchair mounts with one, two or three tubes each equipped with either a joint with Allen key screw (AK) or a quickshift joint with lever ( QS).

Choose between Universal Device Socket (UDS), REHAdapt‘s quick release adapter system or REHAd-apt‘s Spigot Link System (SLS).

Combine with any SLS/UDS cradle or device adapter. State wheelchair clamp on order.

Wheelchair BundlesL3D

SLS UDS

How to order a Light-3D Mount?

Example:

L3D-TC 3QS-U#14.4153

„TC“Tableclamp - for tables and boards

„1“, „2“ or „3“amount of tubes - height

and flexibility of your mount

„WC“Wheelchairclamp - by default for 25/22mm (1”/ 7/8”) round frames, please specify any alternatively needed clamp on order.

„-U“Universal DeviceSocket (UDS)

by defaultSpigot LinkSystem (SLS)

„QS“Quickshift lever

„AK“Allen key screw

Allen Key Screws Allen Key ScrewsQuickShift QuickShift

1 tube L3D-WC 1QS#14.3051

L3D-WC 1AK-U#14.3101

L3D-WC 1QS-U#14.3151

L3D-WC 1AK#14.3001

2 tubes L3D-WC 2QS#14.3052

L3D-WC 2AK-U#14.3102

L3D-WC 2QS-U#14.3152

L3D-WC 2AK#14.3002

3 tubes L3D-WC 3QS#14.3053

L3D-WC 3AK-U#14.3103

L3D-WC 3QS-U#14.3153

L3D-WC 3AK#14.3003

16

Light 3D table-mounts with one, two or three tubes each equipped with either a joint with Allen key screw (AK) or a quickshift joint with lever ( QS).

Choose between Universal Device Socket (UDS), REHAdapt‘s quick release adapter system or REHAd-apt‘s Spigot Link System (SLS).

Combine with any SLS/UDS cradle or device adapter.

Table Top BundlesL3D

SLS UDS

How to order a Light-3D Mount?

Powered Wheelchair

If other than round frameclamp is re-quired for the chair, please specify on order.

Custom frameclamp is included free of charge!

Order device holder separately -

A device holder needs to be ordered sepa-rately. According to prior decision choose from article numbers #14.15xx (with SLS-Spi-got) or #16.11xx (with UDS connector).

by defaultSpigot LinkSystem (SLS)

Allen Key Screws Allen Key ScrewsQuickShift QuickShift

1 tube L3D-TC 1AK#14.4001

L3D-TC 1AK-U#14.4101

L3D-TC 1QS#14.4051

L3D-TC 1QS-U#14.4151

2 tubes L3D-TC 2AK#14.4002

L3D-TC 2AK-U#14.4102

L3D-TC 2QS#14.4052

L3D-TC 2QS-U#14.4152

L3D-TC 3QS-U#14.4153

3 tubes L3D-TC 3AK#14.4003

L3D-TC 3AK-U#14.4103

L3D-TC 3QS#14.4053

17

Special BundlesL3D

L3D-TC 1QSfor Integramouse Plus#14.1036

LIGHT-3D Table mount with one tube and one joint with lever.


Light 3D Table mount with two tubes and two joints with lever


with three tubes, two joints with lever and one swivel unit.

IntegraMouse Bundles

IntegraMouse & Keo#14.1017

Light 3D Table mount with two tubes and two joints with lever

L3D-TC 3QSfor iAdapter #14.1054

LIGHT-3D wheelchair mount with three tubes, two joints with lever and one swivel unit to hold an AMDi iAdapter. Wheel-chair clamp to be stated on order.

with wheelchair clamp:

L3D-WC 3QSfor iAdapter#14.1053

LIGHT-3D wheelchair mount with three tubes, two joints with lever and one swivel unit to hold an AMDi iAdapter. Wheel-chair clamp to be stated on order.

iAdapterBundles

18

L3D BedMount UDS#14.8002

Innovative mount with rigid tube & gooseneck for device usage in bed, held by the weight of the mattress, no fixation to bed rails needed. Includes Universal De-vice Socket (UDS), REHAdapt‘s quick release system.

L3D BedMount SLS#14.8003

Innovative mount with rigid tube & gooseneck for device usage in bed, held by the weight of the mattress, no fixation to bed rails needed. For use with REHAdapt‘s Spigot Link System (SLS), combine with any SLS cradle/device.

L3D-Car Seat Mount#14.1070

Light 3D mount for attaching a lightweight device (max 2,75lbs) to the rear of a car seat. Fixation on the headrest pillars with Allen key screws. Swift adjustment of joints through quickshift levers, includes REHAdapt‘s quick release interface L3D UDS.

L3D BedMount SLS HD#14.8053

Innovative QuickShift mount with rigid tubes for device usage in bed, held by the weight of the mattress. Combine with any Spigot Link System (SLS) cradle/device.

By its unique and simple at-tachment method, the Bed-Mount works for all beds. Sim-ply slide it under the mattress and you got it mounted!

Bed Mounts

Car Mounts

L3D

L3D

19

?Switch MountsL3D

L3D-TC 2QS for the AbleNet Buddy Buttonor Specs#14.1016

Light 3D Table mount with two tubes and two joints with lever for the following switches (adapter included - switch not included).

We have adapters for every need!

If not listed herefeel free to contact us.

L3D-TC 2QSfor the Proximity Switch#14.1010

L3D-TC 2QSfor the Mini-Joystick#14.1011

L3D-TC 2QSfor the PikoButton

#14.1013

L3D-TC 2QSfor the AbleNet

JellyBean#14.1014

L3D-TC 2QS for the AbleNet BigRed

#14.1015

L3D-TC 2QSfor the WobbleSwitch#14.1004

20

L3D-WC 2AK 1 Switch#14.1000

LIGHT-3D single switch mount to position controls like switches, joysticks or proximity sensors on wheelchair headrests or similar with Allen key screws. State the desired frame clamp when ordering (default: 16mm / 3/8“ round).with QuickShift levers:

L3D-WC 2QS 1 Switch#14.1050

L3D UNC Miniclamp#01.1008

Universal tubeclamp for round and oval tubes of 13 to 35 mm diameter (1/2 to 1 3/8“) and small footprint. The clamping lever allows for quick and easy fixation at various spots of a wheelchair or existing device mount. Rubberized clutches to get a decent grip, enough for lightweight items like switches. The UNC thread takes in a variety of different REHAdapt button adapters.

with Quickshift joint:L3D10 Miniclamp QS#14.1174

Additional 3D Quickshift joint to attach any REHAdapt SLS Switch Adapter or 10mm (3/8“) tube.

L3D-MC 2QS#14.5052

LIGHT-3D mount for quick positioning of switches. Includes a versatile small tube clamp, two 10mm/ 3/8“ diameter tubes totaling 400mm/16“ length and three quickshift joints to combine with any SLS switch adapter plate. (adapter not included)

L3D-WC 3AK 2 Switch#14.2000

LIGHT-3D Dual Switch Mount to position 2 swit-ches at wheelchair headrest or similar structures, with allen key screws. State the desired frame clamp when ordering (default: rectangular max 30mm / 1 3/16“).with QuickShift levers:

L3D-WC 3QS 2 Switch#14.2050

L3D-MC 2QS-B#14.5552

Universal mount kit for quick positi-oning of switches. Includes versatile small tube clamp, two 10mm/ 3/8“ diameter tubes totaling 400mm in length, and three Quickshift joints. Including the three most popular switch mount plates (for the Buddy Button, the Specs, the Jelly Bean, the Big Mac etc).

21

FS

Benefits of a Floorstand

Rolling Floor Stands -Our floorstands provide a great mount even if there is nothing to mount to. Lying in a nursery bed, sitting on a recliner or even on a bean bag? We will still hold your device in an ergonomic and stable position!

Adjustable widthThe Floorstand basis opens a wide area for the device to safely reach over, without compromising stability. Low ground clearance allows for reaching un-der beds and sofas.

Adjustment with your fingertips! Effortlessly move choose the position of your device and the Float arm will carry its weight and keep it precisely where you want it.

Two arm systemsBoth available arm systems for the floor-stands give great flexibility to actually position a device. Whether it reaches over the head, is placed on the side of a bed or even free stan-ding in the room, your device will be exactly where you need it.

After the initial adjustment, the Float arm keeps the device weight in balance at any position. Just set the device to the desired spot – no control lever or screw needed.

The Lock floorstand arm is composed of sturdy Monty3D tubes, connected via 360° adjustable joints. After finding the right position, lock down the arm with the convenient clamping levers.

1.

2.

„Lock“

„Float“

160°

90°

22

Benefits of a Floorstand

Wheels The wheels roll on both hard floors and carpets. They can of course be locked in place.

Variable height in a snap!The telescopic columns of the Tele– and Variostands are equipped with a gas spring. Adjusting to the required height is a snap and works so smoothly, that you‘ll find yourself pulling it in and out just for the fun of it!

„QuickPack“The optional QuickPack feature allows to fold down the stands in literally no time. The handy transportation bag allows you to conveniently tra-vel with the equipment for usage in different loca-tions. The bag is free of charge with any QuickPack floorstand (also available separately).

LightweightYou‘ll be amazed how lightweight a Rehadapt Floorstand is - given the size and sturdiness of the products.

3.

4.

5.

6.

20 lbs only!

23

Economic rolling floorstand for positio-ning devices over beds, recliners or wheelchairs. Overhanging arm composed of Monty3D tubes. Column height fixed.

EcoLock#17.1055

with free floating articulated arm:EcoFloat#17.1070

with free floating articulated arm:VarioFloat#17.1065

with free floating articulated arm:TeleFloat#17.1073

with free floating articulated arm & quickpack option:TeleFloat QP#17.1074

with free floating articulated arm &quickpack option:VarioFloat QP#17.1066

with Quickpackoption:TeleLock QP#17.1052

with Quickpackoption:VarioLock QP#17.1063

Plain and economicThe Eco floorstands of-fer basic functionality at affordable prices. Both the column and the base are fixed but the flexible arm allows a precise positio-ning.

Height adjustableTele floorstands allow for mounting devices in eleva-ted positions, e.g. for usa-ge in hospital-style beds. The gas spring supported telescopic column brings the device up to the height of 50 inches!

Width & heightadjustableBesides adjustability in height, Vario floorstands offer a base with a va-riable width. This allows passing through narrow doors. Furthermore, the column can be centered or placed on a side.

Telescopic rolling floor-stand for positioning devices over beds, recliners or wheelchairs. Overhanging arm com-posed of Monty3D tubes. Gas spring supported height adjustment.

TeleLock#17.1050

Versatile rolling floorstand for positioning devices over beds, recliners or wheel-chairs. Overhanging arm composed of Monty3D tubes. Height and width adjustable.

VarioLock#17.1061

FloorstandsFS

„Eco“

„Tele“

„Vario“

24

FS-L3D#17.1400

Elegant floor mount with a flat base for positioning of

lightweight devices. With gooseneck for easy adjust-

ments. Can roll over two wheels when being tilted.

Height: 1,20m (47“). Base-plate diameter: 50cm (20“) Weight: 7kg/15.4 lbs. Max device weight: 1kg/2.2 lbs

FS-Pentalock-Tele#17.1100

Telescopic floor mount on five-star base with casters, to posi-tion communication aids and computers/tablets over beds, sofas or wheelchairs. The design combines REHAdapt‘s classic Floorstand arm (with gas-spring loaded column, double-clamp UDS and quickshift lever joints) with a small-footprint rolling base.

FS-Pentalock-Eco#17.1102

Rolling floor mount on a five-star base with casters, to position communication aids and computers/tablets over beds, sofas or wheelchairs. The design combines REHAdapt‘s classic Floorstand arm (dou-ble-clamp UDS and quickshift lever joints) with a small-foot-print rolling base. The height of the column (non-telescopic) is optimized for nursing beds.

FS-L3D-HD#17.1410

Elegant floor mount with a flat base for positioning of lightweight devices with Light3D tubes and quickshift handles. Can roll over two wheels when being tilted. Height: 1,20m (47“). Base-plate diameter: 50cm (20“) Weight: 7kg/15.4 lbs. Max device weight: 1.5 kg/3.3 lbs

Small design!

FS-mini Upgrade arm#17.2004

L3D-Tube with additional joint for an extension of the FS-mini arm of additional 400mm (16“)

FS-Laptop Tray#17.2001

FloorStand: Multi-purpose tray to hold laptops, papers, books etc., to be attached to fixed part of floorstand column. Size: 17“x12.5“

Transportbag for FS QuickPack#02.0003

Rolling Transportation bag for the Floor-stand QuickPack models. Made from sturdy ballistic nylon, including heavy-duty handles and zippers. Takes the edge off transporting a floorstand.

FloorstandPentalock:

Our new floorstandwith small foot-print

rolling base

Available as telescopic- and eco-version

25

TS

Benefits of Tablestands

Tablestand mounting solutions -Our Tablestand product range ensures very sturdy mounting for all types of devices. Whether you want to place the device on top of something - even with levelling for uneven surfaces - or whether you want to clamp to a piece of furniture - REHAd-apt has the right solution for you!

1x arm2x solutionsturn the arm of a Float-Floorstand into a tablemount by adding just a clamp.

Goosenecksfor maximum flexibilityFits perfectly to you and your en-vironment. No matter if it‘s on your sofa, in your bed, in a recliner or on the floor, table or you want to even hang it - our FlexiMounts are the right solution for you! Fleximounts can adjust to any shape

1.

FS-OH-TC FS-OneHand Table Clamp

mounts to tables and on walls

#01.1004

2.

Automatic surface levelingTable-top mounting system with X-formed frame available which au-tomatically brings the mount into an upright position on uneven surfaces.

3.

26

Benefits of Tablestands

27

TS-DC#12.1653

Table-top mount with a straight, vertical tube and Universal De-vice Socket (UDS-22-DC). Vibra-tion and slip-proof rubber feet. Height adjustable from 5 to 250 mm (1/4“ to 10“).

TS-XL#12.1602

Table-top mounting system, X-formed frame with automatic surface leveling. Device Height 5 to 500 mm (1/4“ to 20“). Includes Universal Device Socket (UDS-22-DC).

TS-GO#12.1652

Easily foldable tablestand that ensures the secure positioning of devices. Ideal for transitions between different sites.

TS-FT#12.1660

Folding tablestand for tablets. The hard hin ged joint allows a multitude of angles. Holds tablets with and without protective case (width: 10 mm and 25 mm). Folds open and wraps around 9,7“ tablets for easier trans portation.

TS-UC#12.1650

Table stand designed for even surfaces. Prevents skidding or sliding. Holds the communica-tion device, in upright, flat or any tilt angle. Folds flat for easy transportation.

TablestandsTS

28

NEW

NEW

NEW

TC-OH#12.1730

TableClamp OneHand, keeps devices weighing 2kg - 6kg (5 - 13lbs) floating for easy re-positioning. Device can be moved 90 degrees vertically and 360 degrees horizontally.

for heavier devices:TC-OH-HD#12.1740

for devices weighing 6kg - 13kg (13 - 29lbs)

TC-FM UGA#12.1721

Table-top mount composed of a SuperClamp base and one gooseneck 350mm (14“) with RE-HAdapt Universal Device Socket (UDS).

TC-FM SLS#12.1722

Combine with any cradle/device with Spigot Link System (SLS).

TC#12.1700

Table-top mount composed of a SuperClamp base and one bent 22,2 tube, very flexible with QuickShift levers. Includes Uni-versal Device Socket (UDS-22-DC).

ClampOnMount#12.1760

Durable Table-top mounting system with versatile Super-Clamp base, two tubes and Quick-Shift handles for quick and easy adjustment. Includes Universal Device Socket with double clamp (UDS-22-DC).

Flexi MountsOne Hand

Tableclamps

Can be usedas mount

on walls too!

29

Components & Adapters -A wide range of components and adapters make Rehadapt products extremely versatile. No matter what Rehadapt product you own: our M3D, L3D or MagicArm systems are ex-pandable and even combinable to give you freedom to mount any device.

componentshub

assessmentkits

30

Adapterfor Communication Devices

for Switches & Controls

for iPads, Tablets & Phones

for Laptops & Netbooks

Universal Adapters & holders

Device Sockets 38

3232

34

35

36

36

Magic Arm

Tubes 38

Frame Clamps 42

Joints 40

Swivel Units 41

47

31

Device adapter with integrated kickstand for mounting follwing devices:

GA-TS-TDV T10 #16.1183

GA-TS-TDV T15 #16.1185

GA-TS-AMDi iAdapter #16.1184

GA-Spok/LW SL40#16.1129

GA-FRS ComLink#16.1127

Adapters for Communication Devices UDSAdapters for specific Communication Devices on Universal Device Socket (UDS). The adapters get permanently fixated to the device so those can quickly be hooked in and out of the UDS.Fastening materials always included, UDS not included.

GA-Mobi 2#16.1138

GA-Wego#16.1139

GA-NOVA CHAT#16.1144

GA-AMDI iAdapter + Smart Series #16.1141

Plan B mountable Clipboard #16.1201Robust plastic clipboard with interface for Universal Device Socket (UDS), to position printed Communication Boards right at the familiar spot on the mount when the Speech Generating Device is not available.

more device adapters

on request

Plan B mountable Bookstand #16.1202Robust plastic clipboard with interface for Universal Device Socket (UDS), to position printed Communication Books right at the familiar spot on the mount when the Speech Generating Device is not availa-ble.

GA-Light Writer SL35/SL38#16.1115

GA-AbleNet Connect#16.1173

GA-ACCENT 800/1000#16.1150

GA-ALLORA 2#16.1151

GA-TDV I Series#16.1168

GA-Lifeproof AMPS#16.1169

to mount tablets with Lifeproof case or other cradles with AMPS hole pattern

GA-GridPad#16.1177

32

GA-LC Eyegaze#16.1159

GA-Allora#16.1116

GA-Tellus Mobi#16.1121

GA-FL4SH#16.1131

GA-Beamz#16.1162

GA AleaCAM30NT#16.1145

GA-Tech/Talk 8 AMDi#16.1146

Adapters for Communication Devices SLSThese lightweight device adapters are economically equipped with just a spigot to get chucked directly into the 10mm L3D Joint („SLS= Spigot Link System“).

GA-Zingui#16.1135

L3D-GA-Tobii M8#14.1525

L3D-GA-GoTalk#14.1555

for mounting GoTalk 4+/9+/20+

L3D-GA-SL40#14.1502

for mounting Lightwriter SL40

L3D-GA-AMDi iAdapter#14.1503

L3D-GA-OMNI#14.1504

GA-Tellus 4#16.1137

GA-EyeGaze-Bracket#16.1193

GA-GoTalk Express32#16.1134

GA-Tellus 5#16.1187

Device adapter for eye control cameras. For all REHAdapt Tablet mounts, either with UDS or SLS interface. Applicable to tobii PCEye Mini, tobii PCEye Go, tobii PCEye Explore, ALEA Cam NT30, MyGaze and eyetech TM5 mini. Compatible with all of REHAdapt’s tablet or notebook cradles, both with UDS or SLS interface.

33

Adapters for Switches & Controls

L3D-GA-AbleNet Mini-Joystick#14.1584

Device adapter for AbleNet‘s Mini-Joystick, includes 3D-joint for moun-ting onto onto 10mm (3/8“) tube of REHAdapt‘s Light 3D system.

L3D

L3D-GA-Proximity Sensor#14.1585

Device adapter for proximity sensor, includes 3D-joint for mounting onto 10mm (3/8“) tube of REHAdapt‘s Light 3D system.

L3DL3D-GA-AbleNet Pneumatic Switch#14.1586

Device adapter for AbleNet Pneumatic Switch, includes 3D-joint for mounting onto 10mm (3/8“) tube of REHAdapt‘s Light 3D system.

L3D

L3D-GA-Buddy & Specs Switch#14.1508

Device adapter to mount AbleNet‘s Buddy Button, Specs & Candy Corn Switch to REHAdapt‘s Light 3D system via Spigot Link.

L3D

L3D-GA-UB45#14.1563

Device adapter with Spigot Link System (SLS) for mounting devices and parts with thread 1/4“ UNC to REHAd-apt‘s Light 3D system.

L3D

L3D-GA-PikoButton#14.1582

Device adapter with Spigot Link System (SLS) for mounting the Piko-Buttons small and large to REHAdapt‘s Light 3D system.

L3D

L3D-GA AKL M6#14.1587

Device adapter for devices with Ø6 - Ø8mm holes like the IntegraMouse PIus. Included Ø10 spigot to connect to REHAdapt‘s Light 3D Spigot Link System (SLS).

L3D

L3D-GA-JellyBean Switch#14.1506

Device adapter for mounting Able-Net‘s Jelly Bean Switch and alike to REHAdapt‘s Light 3D system via Spigot Link.

L3D

L3D

L3D-GA-Big Red Switch#14.1507

Device adapter for mounting Ab-leNet‘s Big Red Switch and alike to REHAdapt‘s Light 3D system via Spigot Link.

L3D

L3D-GA-Lib Switch#14.1509

Device adapter to mount Lib Switch to REHAdapt‘s Light 3D system via Spigot Link.

L3D-GA-Universal#2#14.1558

Device adapterplate with VELCRO. Di-mension 110mm x 50mm (3 5/16“x2“) for mounting items (eg Blue2 switch)

L3D-GA-Universal#1#14.1583

for James, AMDi PartnerPlus, Partner-Plus4 & WobbleSwitch

L3D L3D

34

GA-iPad 1 iPad 1 #16.1130

GA-iPad 2-4 iPad 2-4 #16.1133

GA-iPad 5 iPad 5 #16.1157

GA-iPad Air 1 iPad Air 1 #16.1157

GA-iPad Air 2 iPad Air 2 #16.1171

GA-iPad Mini 1-3 iPad Mini 1-3 #16.1167

GA-iPad Mini 4 iPad Mini 4 #16.1198

GA-iPad Pro 9,7“ iPad Pro 9,7“ #16.1171



GA-Defender Case iPad 2-4iPad 2-4 #16.1158GA-Defender Case iPad 5iPad 5 #16.1160GA-Defender Case iPad Air 1iPad Air 1 #16.1160GA-Defender Case iPad Air 1 lockiPad Air 1 #16.1170GA-Defender Case iPad Air 2iPad Air 2 #16.1181GA-Defender Case iPad Mini 1-3iPad Mini 1-3 #16.1174GA-Defender Case iPad Pro 10,5“iPad Pro 10,5“ #16.1250GA-Defender Case iPad Pro 12,9“iPad Pro 12,9“ #16.1196

UDS

Adapters

Adapters

for iPads

for iPads

L3D-GA-iPad 1 iPad 1 #14.1548

L3D-GA-iPad 2-4 iPad 2-4 #14.1500

L3D-GA-iPad 5 iPad 5 #14.1514

L3D-GA-iPad Air 1 iPad Air 1 #14.1514

L3D-GA-iPad Air 2 iPad Air 2 #14.1545

L3D-GA-iPad Mini 1-3 iPad Mini 1-3 #14.1519

L3D-GA-iPad Pro 9,7“ iPad Pro 9,7“ #14.1545

L3D-GA-iPad Pro 10,5“iPad Pro 10,5“ #14.1603

L3D-GA-iPad Pro 12,9“iPad Pro 12,9“ #14.1565

L3D-GA-Defender Case iPad 2-4iPad 2-4 #14.1524L3D-GA-Defender Case iPad 5iPad 5 #14.1526L3D-GA-Defender Case iPad Air 1iPad Air 1 #14.1526L3D-GA-Defender Case iPad Air 1 lockiPad Air 1 #14.1540L3D-GA-Defender Case iPad Air 2iPad Air 2 #14.1559L3D-GA-Defender Case iPad Mini 1-3iPad Mini 1-3 #14.1551L3D-GA-Defender Case iPad Pro 9,7“iPad Pro 9,7“ #14.1526L3D-GA-Defender Case iPad Pro 10,5“iPad Pro 10,5“ #14.1603L3D-GA-Defender Case iPad Pro 12,9“iPad Pro 12,9“ #14.1570

SLSDevice cradle with Spigot Link System (SLS) for mounting iPads (optionally in Otterbox cases)to REHAdapt‘s Light 3D system

Device cradle for mounting iPads (optionally in Otterbox cases) to REHAdapt‘s Universal Device Sockets (UDS)

For use with Otterbox Defender

Case

!

For use with Otterbox Defender

Case

!

35

L3D-GA-Lifeproof AMPS#14.1546

For devices with the AMPS hole pat-tern, such as tablets in Lifeproof cases

L3D-GA-Mobile Phone Large#14.1543

for mounting large smartphones (width: 75-89 mm / 3“-3 1/2‘‘; thickness: 9-13 mm / 3/8‘‘-1/2‘‘).

Device cradle with Spigot Link System (SLS) for mounting the follwoing iPhones on the Rehadapt Light 3D system:

L3D-GA-iPhone 4/4S #14.1501L3D-GA-iPhone 5/5S #14.1515L3D-GA-iPhone 6/6S #14.1537L3D-GA-iPhone 6/6S+ #14.1568L3D-GA-Defender Case iPhone 6+/6S+ #14.1567L3D-GA-Defender Case iPhone 6/6S #14.1572

L3D-GA-Samsung Galaxy-Tab 3 (7“) #14.1550-Tab 3 (8“) #14.1556-Tab 3 (10.1“) #14.1553-Tab 4 (7“) #14.1552-Tab 4 (10.1“) #14.1544-Note Pro 12 #14.1554-Tab A (9,7“) #14.1560

L3D-GA-Mobile Phone Small#14.1541

for mounting small smartphones (width: 49-63mm / 1 15/16“-2 7/16“; thickness: 9-13mm / 3/8“-1/2“)

L3D-GA-Mobile Phone Medium#14.1542

for mounting medium smartphones (width: 62-77mm / 2 7/16“-3“; thickness: 9-13mm / 3/8“-1/2“)

L3D-GA-Surface Pro 3#14.1538

L3D-GA-Surface Pro 4#14.1566

for mounting the Microsoft Surface Pro 3 & 4

GA-Griffin-Latitude-10#16.1149

for mounting the Dell Latitude 10 in Griffin Survivor case

GA-Dell XPS 12#16.1152

for mounting the Dell XPS 12

GA-Dell XPS 18#16.1153

for mounting the Dell XPS 18

GA-Dell Latitude 10 ST2#16.1154

for mounting the Dell Latitude 10 ST2

GA-Samsung Galaxy Note Pro 12#16.1175

for mounting the Samsung Galaxy Note Pro 12“

GA-Dell Venue 11 Pro#16.1166

for mounting the Dell Venue 11 Pro

GA-Surface Pro 4 Survivor Case#16.1203

for mounting the Surface Pro 4 inGriffin Survivor Slim Case

GA-Surface 3#16.1178

for mounting the Surface 3 (10“)

GA-Surface Pro 3#16.1165

GA-Surface Pro 4#16.1189

for mounting the Microsoft Surface Pro 3 & 4

Adapters for Tablets & Laptops UDSAdapters for mounting laptops and tablets on Universal Device Socket (UDS). UDS not included.

Adapters Tablets & Phones SLSAdapters with Spigot Link System (SLS) for mounting tablets & phones on the Rehadapt Light 3D system.

L3D-GA-Dell Venue 11 Pro#14.1539

for mounting the Dell Venue 11 Pro

36

GA-Netbook 10-14#16.1136

for mounting Netbooks & small Note-books (10“ to 14“)

GA-VESA 75x75#16.1117

for mounting devices with VESA fit-tings (hole pattern 75x75mm/3“x3“)

GA-VESA 100x100#16.1123

for mounting devices with VESA fittings (Hole pattern 100x100mm/4“x4“)

GA-LapTray 430x315#16.1163

Laptop tray 430x315mm (17“x12.5“)

GA-Tab-Tite#16.1180Adapted TabTite (TAB8U) device cradle to mount 10“ tablets with a protective case

GA-Tab-Tite Mini#16.1195Adapted TabTite (TAB2U) device cradle to mount 7“ tablets with protective case

GA-Tab-Tite Mini#14.1571

Adapted TabTite cradle (TAB2U) with the Spigot Link System (SLS) for mounting 7“ tablets in Rehadapt Light 3D system.

GA-Universal-F-116/135#16.1147

for mounting devices with permanent fixation via strong adhesive tape

Generic device adapter for mounting tablets of different sizes:GA-Tablet 7“ & 8“ #16.1156

GA-Tablet 10“ #16.1155

GA-Universal-R-116/135#16.1148

for mounting devices with interchan-geable fixation via Velcro tape

GA-Notebook 15-17#16.1140

for mounting notebooks (15“ to 17“)

Adapters Universal UDSAdapters for mounting laptops and tablets on Universal Device Socket (UDS). UDS not included.

Adapters Universal SLSAdapters with Spigot Link System (SLS) for mounting tablets & phones on the Rehadapt Light 3D system.

L3D-GA-Universal-R-116/135#14.1512

Removable generic device adapter for mounting devices with intercha-geable fixation via Velcro tape. 116x135mm.

L3D-GA-LapTray 430x315#14.1535

for mounting laptray 430x315 mm (17“x12 3/8“)

L3D GA-Tablet 10“#14.1517

for mounting Tablet 10“

L3D GA-Tablet 7“-8“#14.1518

for mounting Tablet 7“-8“

L3D-GA-Universal-F-116/135#14.1511

Generic device adapter for mounting devices with permanent fixation via strong adhesive tape. 116x135mm.

L3D-GA-Tab-Tite#14.1549

Adapted TabTite cradle (TAB8U) for mounting 10“ tablets with a protective case.

37

2 slip-out safeguards for tubes Ø22x2.3 mm with screws. Prevents tubes from slipping out. (without allen wrench)

R22,2-200 SOSto R22,2-500 SOSTube with Slip-Out Safequard, 22,2 mm diameter with the following lengths:200 mm (8“) #01.5505300 mm (12“) #01.5510400 mm (16“) #01.5520500 mm (20“) #01.5530

M3D

Device Sockets

M3DR22,2-200to R22,2-500Tube, 22,2 mm diameter with the following lengths:200 mm (8“) #01.5005300 mm (12“) #01.5010400 mm (16“) #01.5020500 mm (20“) #01.5030600 mm (24“) #01.5031

Tubes

Daessy Adapter#16.1020

Adapter piece to mount devices with a Daessy adapter into Rehadapt‘s Universal Device Sockets (UDS), UDS not included.

LC-Tech-Adapter#16.1021

Adapter piece to mount the Eyegaze Edge Talker.

L3D-UDS#14.1516

Universal Device Socket (UDS) with Spigot Link to use UDS-adapted devices on Rehadapt´s Light 3D system.

UDS-Vesa-AD#16.1010

Universal Device Socket (UDS) with adapter for mounting on a VESA 75 or 100 fitting. Enables 3rd party monitor holders to carry Rehad-apted devices. Includes an Allen key.

UDS-22#16.1000

Universal Device Socket with ball-joint & screw. Rehadapt‘s signature Quick Release system to hook devices safely into any Monty-3D and many Light-3D products.

M3D UDS-22-DC#16.1051

Universal Device Socket with separate Quick Shift clamping of the ball joint and the tube fixation. When repositioning, the weight of the device remains sup-ported due to the 2nd clamp.

M3D

DualClamp

+

UDS-22-QS#16.1050

Universal Device Socket with ball-joint and Quick Shift adjustment. Very easy handling due to the Quick Shift handle which firmly secures all the joints without the usage of any tool.

M3D

QuickShift

+

addSafe-guard

+

MONTY-3D Connector HD. Connects the parallell tube‘s that build HD dou-ble-tube systems.

Slip-OutSafeguard kit#01.5500 M3D

M3D-Connector HD#11.1500 M3D

38

M3D

M3D

NEW

UDS-ECO#16.1004Universal Device Socket (UDS) sitting directly on the tube, fixated with a bolt. Most economic & spa-ce–saving version of Rehadapt‘s quick release system. Allows for rotation around the tube axis.

UDS-ECO Plus#16.1005

Fixated close to the tube. Allows for rotation around the tube axis plus twisting of the screen.

M3D-HD Upgrade-kit#11.1403

Monty-3D upgrade kit to equip any M3D mount with a double tube. Signi-ficantly reduces vibration, allows for heavy devices on long mounts.

M3DM3D-tubekit#11.1400

Monty-3D Standard tube kit, including 3 tubes in lengths of 200 mm (8“), 400 mm (16“) and 500mm (20“).

M3DEasy-Off Kitfor EyeControl HD#11.1510

Allows for the quick removal of the entire mount directly at the wheelchair frame. (Only for double tube mounts).

M3D

R10-100to R10-350L3D-Rod, 10 mm diameter with following lengths:100 mm (4“) #14.9512150 mm (6“) #14.9513200 mm (8“) #14.9514250 mm (10“) #14.9515300 mm (12“) #14.9516350 mm (14“) #14.9517

L3DR10-100to R10-350L3D-Rod, 16 mm diameter with the following lengths:100 mm (4“) #14.9500150 mm (6“) #14.9501200 mm (8“) #14.9502250 mm (10“) #14.9503300 mm (12“) #14.9504350 mm (14“) #14.9505400 mm (16“) #14.9506

L3D

R10-50#14.9511

L3D-Rod, Ø 10 x 50 mm ( 3/8“ x 2“) with 1/4“ threading on one end for switch adapters.

L3D

S-tubes in different sizes for extra clearance.

SR22,2-S #01.5650S-tube medium Ø22,25 x 660 mm Offset 152mm (7/8“ x 26“ Offset 6“)SR22,2-M #01.5660S-tube medium Ø22,25 x 660 mm Offset 228mm (7/8“ x 26“ Offset 9“)SR22,2-L #01.5670S-tube large Ø22,25 x 762 mm Offset 304mm (7/8“ x 30“ Offset 12“)SR22,2-XL #01.5680S-tube extra-large Ø22,25 x 863 mm Offset 304mm (7/8“ x 34“ Offset 12“)

M3D

TwinTubes

+

S, M, L and XL

+

Tubes

JointsExtra flexibility - 360° adjustable!Rehadapt’s signature tube joints allow for full 360° adjustment in all dimensions. Available with Allen Key screws or quick-shift levers.

Quickshift optionQuickshift levers make it easy to adjust the joints without tools.

Lock optionEach tube‘s movementis separately lockable with an additional Allen Screw.

M3D-Connector HD#11.1500

M3D-3-Fold-down-unit RIGHT#11.1320

Fold down unit to move the device easily up and then to the side of the wheelchair. For right side mounting.

M3D

M3D

M3D-3-Fold-Down-Unit LEFT#11.1321

Fold down unit to move the device easily up and then to the side of the wheelchair. For left side mounting.

39

NEW

L3D L3D L3D

Joints

Connects a 16 mm (5/8“) tube to a 16 mm (5/8“) tube.

with Lock option:

L3D16-16 QS#14.1250

L3D16-16#14.1200

L3D16-16Lock QS

#14.1254

L3D16-16Lock

#14.1257


with Lock option:

L3D16-10#14.1201

L3D16-10 QS#14.1251

L3D16-10Lock QS

#14.1255

L3D16-10Lock

#14.1258


L3D10-10#14.1202

L3D10-10 QS#14.1252

L3D10-10 Lock QS

#14.1256

L3D10-10 Lock

#14.1259

with Lock option:


with Lock option:

M3D-3- Universal

#11.1300

M3D-3-Uni QuickShift

#11.1350

M3D-3-Uni QuickShift Lock

#11.1355


L3D22-16#14.1203

with Quickshift option:

L3D22-16 QS#14.1253

L3DM3DM3D


L3D22-10#14.1204

L3D22-10 QS#14.1264

L3DM3D

with Quickshift option:

40

M3D-2 Swivel-unit#11.1200

Monty-3D swivel-unit, simple. swing the mount between the positions operating/exiting/parked after lifting upward (may be performed by user). Remove the mount by pulling upwards (no lock).

M3D L3D-Swivel-Unit S#14.1220

Light-3D- swivel-unit with quick clamp lever, backlash-free connection bet-ween the vertical tube and the clamp. Clamping force adjustable. Includes the indexing slot (#14.1225).

L3D

L3D-Swivel-Unit S 22#14.1222

Light 3D- swivel unit with lever and indexing slot, to be mounted onto a 22mm (7/8“) Monty 3D tube.

L3D M3DM3D-Indexing-Slot#11.1251

Indexing clamp for M3D swivel joint, allows for continuos transition between positions „operating“ and „entering“. Additional latch for „parked“ position.

M3D

Swivel Units

M3D-2-Swivel-unit S#11.1220

Monty-3D swivel-unit, backlash-free. Swivel the mount between the posi-tions operating/exiting/parked or and release it by opening the quick-lock lever. Clamping force adjustable.

M3D

L3D-Indexing-Slot#14.1225

Indexing clamp for L3D swivel joint, allows for continuos transition between positions „operating“ and „entering“. Additional latch for „parked“ position.

L3D

Our swivel units let you easily swing your mounts to different positions:

❶ in use

❷ exiting

❸ parked

❶

❷❸

M3D-Indexing-Latch#11.1250

Indexing clamp for M3D swivel joint, that defines the three latched positions operating/entering/parked.

M3D

M3D-Connector 90°#11.1390

Connector that ensures the firm per-pendicular connection between two22 mm (7/8“) tubes.

M3D

41

Bases

42

M3D-1&2-RotLock Swivel-Joint S Special#11.1082

Mount-side half of heavy duty swivel-unit S, w/o frame adapter. Add frameclamp to build individual swivel-unit S, attaching directly to wheelchair. Anti-sagging ele-ment included.

M3D

„1&2“All Swivel joints with positioning indicator 1&2 in the name are meant to be attached directly to the wheel-chair frame.

Apply sleeves into the RKL 25 frame clamp of the kits to mount the joints on tubes thinner than 1“ / 25 mm (see page 43).

For custom frameclamps com-bine the joints named „special“ with any frame clamp from page 43.

L3D-Swivel-Unit S special#14.1221

Mount-side half of Light 3D swivel unit with pins, lever and indexing slot clamp (without 2nd tube connector). Combine with any frame clamp to mount directly to the wheelchair.

L3D

M3D-1&2-Swivel-Joint-S Special#11.1222

Mount-side half of swivel-unit S - without frame adapter. Combine with any frame-clamp or -adapter to build individual back-lash-free swivel-unit S, attaching directly to wheelchair.

M3D

M3D-1&2-Base-Swivel-Kit#11.1150

Monty 3D Base & Swivel-joint-unit (simple) to prepare additional wheelchair for existing Monty 3D mount. Includes RKL 25 (interchangeable).

M3D

M3D-1&2-Base-Swivel-Kit S#11.1152

Monty 3D base & swivel-joint-unit S (back-lash-free) to prepare additional wheelchair for existing Monty3D mount. Includes RKL 25 (interchangeable).

M3D

M3D-1&2- Base-Swivel-Kit S + Index#11.1153

Monty 3D base & swivel-joint-unit S (back-lash-free) to prepare additional wheelchair for existing Monty3D mount. Includes RKL 25 (interchangeable). Includes an indexclamp.

M3D

M3D-1&2-Swivel-Joint-S Special + Index#11.1223

Mount-side half of swivel-unit S (no frame clamp). Combine with frameclamp to build individual backlash-free swivel-unit S, at-taching directly to wheelchair. Includes an indexclamp.

M3D

NEW

M3D Base Coupler#11.1550

Complete coupler with a quick release mechanism to easily remove the entire mount from the frame clamp. The con-nection guided by a magnet ensures a perfect alignment. The hand lever provides maximum safety and ergonomics. Adds a 38 mm offset (1,5“).

M3D

M3D Base Coupler Outer Part#11.1552

Outer half of the M3D Base Coupler (#11.1550) attached to the mount. Part with the magnet.

M3DM3D Base Coupler Inner Part#11.1551

Inner half of the M3D Base Coupler (#11.1550) attached to the wheelchair. Part with the hand lever.

M3D

Bases

M3D-1-Base#11.1100

Monty 3D base-unit: standard wheel-chair-frameclamp (round, 25 mm / 1“) and tube clamp.

M3D

M3D-Base Adapter 90°#11.1590

Perpendicular connector that allows the attachment of M3D and L3D mounts on otherwise poorly accessible frame parts. Locking with Allen screws.

M3D

M3D-BaseSpecial Rotation Lock#11.1080

Monty-3D rotation lock element for base unit to hinder a mount from sagging when carrying heavy loads. Especially advised for left-side moun-ting.for double tube:M3D-Base Special Rotation Lock HD#11.1081

M3D

M3D-1-BaseSpecial#11.1102

Mount-side half of Monty 3D base unit - without frame adapter. Combine with any frameclamp or adapter to build an individual base unit.for double tube:M3D-1-Base SpecialDouble Tube#11.1105

M3D

M3D-RKL 25to M3D-RKL 45Monty 3D frame clamp, for round frames with the following diameters25 mm #11.1125

26 mm #11.1126

28 mm #11.1128

29 mm #11.1129

30 mm #11.1130

32 mm #11.1132

34 mm #11.1134

35 mm #11.1135

36 mm #11.1136

38 mm #11.1138

40 mm #11.1140

42 mm #11.1142

45 mm #11.1145

L3DM3D

SleevesSleeves to support different diameter wheelchair frame tubing, to apply in RKL25.25->19 mm #01.2519

25->20 mm #01.2520

25->21 mm #01.2521

25->22 mm #01.2522

25->23 mm #01.2523

M3D L3D

Adapter-Sleeve Sunrise Medical#01.3633

Adapter sleeve to mount #11.1136 M3D-RKL36 at Sunrise Medical wheelchairs with oval frame tubes 33 x 26,5 mm (e.g. Zippie Zone).

M3D L3D

Frame Sleeve Rifton Pacer#01.3634

Adapter sleeve to mount #11.1145 M3D-RKL45 at Rifton Pacer with oval frame tubes 44,5 x 22,25 mm.

M3D L3D

43

NEW

Combining componentsInsert Sleeves into base unit or RKL 25 to fit wheelchair tubes smaller than 1“ / 25 mm

For custom frameclamps combine the Base Special components with any of the frame clamps on the next pages.

M3D-SKL-51 2K#11.1061

Frameclamp for Ergotron column 51mm (2“).

M3D-RKL-Kimba Neo#11.1071

Monty 3D frame clamp for oval tube special for the „Kimba Neo“ stroller from „OttoBock“.

M3D-Item P5#11.1072

Monty 3D frame adapter for wheel-chairs with Item profil 5 railing. (Suita-ble for some power wheelchair from „SKS Rehab“).

M3D-T-Nut 23/7#11.1066

Monty 3D T-Nut frame adapter for C-Profile railing max. 23 x 7 mm (15/16“x1/4“). (Suitable for power wheelchair from „ETAC“ Balder).

M3D-T-Nut 16/6,5#11.1069

Monty 3D T-Nut frame adapter for C-Profile railing max. 16 x 6.5 mm (15/16“ x 1/4“). (Suitable for power wheelchair from „Quantum“ or „Inva-care“).

M3D-RKL-E30-70#11.1060

Frameclamp for rectangular wheel-chair frame elements from 30 mm to 70 mm (1 3/16“ to 2 3/4“) thick.

M3D-RKL-E30#11.1065

Frameclamp for rectangular wheel-chair frame elements up to 30 mm (1 3/16“) thick.

M3D Offset Spacer 25#11.1525

Monty 3D universal off-set spacer 25 mm (1“) to be applied between any mating M3D 22 mm (7/8“) tube joint, base or swivel unit components.

M3DOffset Spacer 38#11.1538

Monty 3D universal offset spacer 38 mm (1½“) to be applied between any mating M3D 22 mm (7/8“) tube joint, base or swivel unit components.

M3D-RAD-Per Uni#11.1062

Universal M3D-Permobil frame-ad-apter for the following Permobil chairs & seats: Hexior, Canto, Corpus, Corpus Jr, Vertical, Stander, KB, Lowrider, Chairman HD, Street, Miniflex, Koala, Playman, Robo.

L3D L3D L3D

L3D

L3D

L3D

L3D

L3D

M3D M3D M3D

M3D

M3D

M3D

M3DM3D-T-Nut 10,5x4#11.1077

Monty 3D T-Nut frame adapter for C-Profile railing max. 10,5 x 4 mm. (Suitable for „Quickie“ power wheel-chair from „SunriseMedical“).

L3DM3D

M3D

M3D-RKL-T 16to M3D-RKL-T 30Monty 3D semi-open frame clamp for tubes with the following diameters. Applicable when frame tube is not fully accessible (e.g. overlying seat).16 mm #11.1416

19 mm #11.1419

20 mm #11.1420

21 mm #11.1421

22 mm #11.1422

23 mm #11.1423

24 mm #11.1424

L3DM3D

25 mm #11.1425

26 mm #11.1426

27 mm #11.1427

28 mm #11.1428

29 mm #11.1429

30 mm #11.1430

Frame Clamps

44

M3D-1-Base Ergo52#11.1101

Monty 3D base unit to mount on the Ergotron stand column 51 mm (2“).

M3D-1-Adapter Ring#11.1074

Monty 3D base mounting adapter to bolt to any flat surface. Combine with Base Special (#14.1119) or Swivel Spe-cial (#14.1221) to build a full unit.

M3D-RKL-M8#11.1070

Monty 3D special clamp with M8 thread for wheelchairs with Ø8 mm threaded holes.

M3D-RKL-M8-Mini#11.1075

Monty 3D special frameclamp with M8 screws for mounting under the crash bracket of the wheelchairs with Ø8 mm threaded holes.

M3D-RKL-M6#11.1073

Monty 3D special frameclamp with M6 thread for wheelchairs with Ø6 mm threaded holes or M6 thread.

L3D L3DM3D M3D

M3D-Permobil UniTrack#11.1068

Monty 3D frame adapter for Permobil UniTrack rail / double T-Nut system.

L3DM3D

L3D16-Base R25#14.1103

Light 3D-16 base-unit. Tube connector Ø16 mm with frameclamp for round frames from 19 to 25 mm (3/4“ to 1“) in diameter. (Please specify exact measurements)with 10 mm diameter:L3D10-Base R25#14.1125

L3DL3D16-Base Special#14.1101

Light 3D-16 base-unit special. Mount-side half of L3D-16 Base unit - without frame adapter. Combine with any frameclamp to build individual Base for 16 mm (3/4“) tubes.with Quickshift option:L3D16-Base Special QS#14.1155

L3DL3D10-Base Special#14.1119

Light 3D-10 base-unit special. Mount-side half of L3D-10 Base unit - without frame adapter. Combine with any frameclamp to build individual Base for 10 mm (3/8“) tubes.

L3D

L3D10-Base E16#14.1116

Light 3D-10 base unit with frame clamp for rectangular elements from 10 to 16 mm (3/8“ to 5/8“) wide, holds 10 mm (3/8“) L3D tubes.

L3D

forheadrests

onlyL3D10-Base R10 to R16Light 3D-10 base unit which holds 10 mm (3/8“) L3D tubes. Connector with 10 mm diameter with frame clamp for round wheelchair tube of following diameters:

L3D R10: 10 - 10,5 mm (7/16“) #14.1111R11: 11 - 11,5 mm (7/16“) #14.1115R13: 12 - 13 mm (1/2“) #14.1110R14: 14 mm (9/16“) #14.1114R15: 15 mm (9/16“) #14.1112R16: 16 mm (5/8“) #14.1113

45

L3D16-Base SK Connect 16 QS#14.1171

Light 3D 16 QS base unit. Superclamp with Ø16 Pin and 16/16 joint with lever to mount L3D 16 (3/4“) tubes to structures sized 13 - 55 mm. 360° positioning freedom.

L3D

L3D16-Base SK Connect 16#14.1170

Light 3D 16 base unit. Superclamp with Ø16 Pin and 16/16 joint with screw, to mount L3D 16 (3/4“) tubes to structures sized 13 - 55 mm. 360° positioning freedom.

L3D

L3D16-Base SK Pin#14.1118

Light 3D 16 base unit. Superclamp with Ø16 Pin to connect further L3D mount components. Suitable for boards or other angular & round structures sized 13 - 55 mm.

L3D

L3D10-Base SK Connect 10#14.1172

Light 3D 10 base unit. Superclamp with Ø16 Pin & 16/10 joint with screw to clamp a 10 mm (3/8“) L3D tube to boards or other angular & round structures sized 13 - 55 mm.

L3D

L3D10-Base SK Connect 10 QS#14.1173

Light 3D 10 QuickShift base unit. Su-perclamp with Ø16 Pin & 16/10 joint with lever to clamp a 10 mm / 3/8“ L3D tube to boards or other structures sized 13 - 55 mm.

L3D

Frame Clamps

L3D16-Base SK#14.1117

Light 3D 16 base unit. Superclamp with fixed vertical fitting for 16 mm (3/4“) L3D tube, to mount to boards or other angular & round structures sized 13 - 55 mm.

L3D

M3D Base SK#12.1000

Versatile SuperClamp with tube con-nector for Ø22 mm (7/8“) tubes, with QuickShift levers. Mounts onto boards or other elements between 10 and 55 mm thickness.

M3D

QuickShift

+QuickShift

+

Our SuperClamp mounts on both angular (e.g. boards) and round

structures (e.g. tubes).

46

MA-UB45#15.1004

Device adapter for mounting devices like cameras with 1/4“ thread to the Magi-cArm. Length of 45mm (1 3/4“). Locknut and star knob included.

Device cradle for mounting the following iPads on MagicArms:MA-GA-iPad Air 1 #15.1026

MA-GA-iPad mini 1-3 #15.1025

MA-GA-iPad 2,3,4 #15.1024

MA-GA-iPad Air 2 #15.1028

MA-iPad Mini 4 #15.1030

MA-GA-iPad 2,3,4 Defender Case#15.1029

Device cradle for mounting the iPad 2, 3 or 4 in Otterbox De-fender cases to the MagicArm.

MA-Base QS R25#15.1012

Frame clamp for mounting the MagicArm on round wheelchair frames Ø25mm (1“). Adaptable to frames from 15 to 24 mm (9/16“ to 15/16“). Other diameters available upon request.

MA-GoTalk Express32#15.1022

Device adapter for mounting the Go-Talk Express 32 to the MagicArm. Heavy-duty version (mounting with screws).

MA-GA-Lifeproof AMPS#15.1027

Device adapter for mounting cradles with AMPS pattern (like Lifeproof Cradle or RAM ad-apters) to the MagicArm.

MA-LIB-Switch#15.1021

Device adapter for mounting the Lib Switch to the MagicArm. Fastening parts included.

MA-GoTalk#15.1007

Device adapter for mounting the GoTalk to the Ma-gicArm. Fastening parts included.

MA-Headless Screw#01.0012

Headless screw for the Magic- Arm to prevent deformation of pivot.

MA-AbleNet JellyBean#15.1003

Device adapter for moun-ting the AbleNet JellyBean or alike to the MagicArm. Fastening parts included.

MA#15.1000

MagicArm (MA) that includes a SuperClamp and an arm articulated with balljoints and a locking knurled knob. The ver-satile clamp can be attached to both angular and round elements sized 13 - 55 mm.

Magic Arm

MA-AbleNet Specs#15.1006

Device adapter for moun-ting the BuddyButton, BigBuddyButton and AMDi Moon Switch to the Ma-gicArm. Fastening parts included.

MA-AbleNet BigRed#15.1002

Device adapter for mounting the AbleNet BigRed, BIGmack or alike to the MagicArm. Fa-stening parts included.

MA-UNLI-CCS#15.1010

Device adapter for mounting the Unlimiter Cristal Clear Switch to the MagicArm. Fastening parts included.

47

„The key to turn technology into Assistive Technology“Positioning has always been key to turn technology into Assistive Technology. Finding the right spot for devices, displays or access tools is an important part of every evaluation. The needs of assessment teams on that quest were guiding the development of the REHAdapt Assessment Kits.

The results are truly spectacular:

Composed of field-tested assortments of items for real life scenarios

Held ready in highly durable, mobile, and easy to maintain cases

With helpful documentation, supporting beginners & advanced users

Heavily subsidized to make these essential tools truly affordable

REHAdapt Assessment Kits come with individual order codes that allow for life-long discounts when parts of the Kits need to be re-stocked.

Thoughtfully composed selections to bring mounting into the standard toolbox of high-caseload assessors & consultants - and into their budget!

Please allow for the Assessment Kits a delivery time of up to 3 weeks.

Cases andstacked layer modulesAll Assessment Kits come in neat cases where every item has its place. The cases have all the same width & length, but different heights to hold stacked layer modules.

These are the modules included:

❶ assessment kit documentation

❷ general device attachment articles and tools

❸ L3D items to mount lightweight technology

❹ Monty 3D parts to mount full weight SGDs

❺ extra L3D/M3D items & specialized wheelchair attachments

LightStandardPrem

ium

48

Assessment Kit Premium#19.9013

Rich assortment of mounting elements to cover full range of Assistive Tech-nology mounting needs. Allows for assessing positioning needs & practical handling of AAC equipment, but also building custom mounts to fit almost any wheelchair. on top of all M3D and L3D items from the Standard Kit, the Premium Kit enables coping with tricky wheelchairs, double tube mounts for enhanced ruggedness, or unusual mount lengths. Includes a number of generic adapters, comes with a folding carry cart.

Assessment Kit Light#19.9014

Most common elements to mount tablets or “Easy-Tec” AAC devices to standard wheelchairs & tables and/or to position switches. Coherent selection of items from the L3D pro-duct range to allow for assessment of positioning needs and practical handling of the AAC equipment. Focus on assessing device operating skills, mounts were selected to provide quick solutions. Includes a number of gene-ric device & switch adapters.

Assessment Kit Standard#19.9012Most common elements to mount the full range of AAC devices to standard wheelchairs & tables and/or to posi-tion switches. Coherent selection of items from the L3D and M3D product ranges to allow for assessment of posi-tioning needs and practical handling of the AAC equipment. Focus on asses-sing device operating skills, mounts were selected to provide quick solu-tions. Includes a number of genericdevice & switch adapters. Comes with a folding carry cart.

withcart

+withcart

+

Standard and Premium Kits come with a folding carry cart

Assessment Kits in three assortmentsfor different usage scenarios

and aspiration levels.

componentshub

assessmentkits

Essential Tools for Positioning- Mounting comes Handy

49

Jesus Alejandro Reyes Sanchez (Alex) with his teacher Lisa Peterson

Sara Holjević with her parents

Unimpeded communication

Rehadapt tries to support dedicated programs to help individuals with special communication needs as often as pos-sible.

In the course of celebrating Saltillo Cor-poration’s jubilee – a manufacturer of communication devices in the AAC field for 20 years now – Rehadapt was ho-nored to present an individual moun-ting solution for the jubilee winner Alex new communication device – custo-mized and perfectly adapted through our unique Virtual Mounting Solution (VMS) service.

„At school we are excited to use the mount because no matter which clas-sroom he is in the NovaChat can be in the right position for his visual and accessibility needs. It fits close to the chair so he can move around tight classrooms and he can even pull his chair up to the classroom tables.“

Sara Holjević is 8 years old, lives in Karlovac and has cerebral palsy. She can not walk or talk but communicate. Using a spe-ech generating device moun-ted by Rehadapt Sara greatly improves communication with the environment, can clear-ly express her feelings, needs and desires, to learn, to ans-wer questions and play ga-mes. This fall she is moving into the first grade of school and we believe that our mounting solution is a great help in learning and maste-ring the program, and the successful establishment of communication in the new

environment

50

Julia Nickel with Rehadapt Engineer Marco Miftari

Anne Sophie happy with her new L3D mount from Rehadapt

Adam with his teachers and therapists

„Aadam, his family, teachers and therapists are so excited about his new communication de-vice from Tobii Dynavox and the mounting arm from Rehadapt Engineering that will mean he can always have it with him wherever goes. Thank you to the teams at both of these re-markable companies that made this possib-le.“

Inclusive Solutions , South Africa

One of the users of our mounts, 10 year old Julia Nickel, became a superstar after a video showcasing her and other Assistive Technology users gathered more than 1.5 million (!) views on Youtube. When she met us at Rehadapt‘s booth at Rehacare, we serviced her mount. In the following panel discussion she gave insights into Alternative and Augmentative Communi-cation to a general audience.

We are glad you stopped by, Julia!

Anne Sophie is happy with her Light 3D mount from Rehadapt. She told us it‘s not just practical but it‘s the only mount which is also looking cool.

51

REHAdaptHightech in reach

vmsvirtual mounting solution

mediahub

Our unique service:we analyze your specific needsto provide you with the best mounting solution - for free!

The way to your individual Virtual Mounting Solution

You ask for itSend us pictures of your wheel-

chair and basic information about the chair and your device

We engineer…Our experienced engineers will

design a custom mounting solution within just three business days

…get back to you...We send you a proposal with the visualized solution photoshopped

into your picture

…and deliverWe ship your pre-assembled indi-vidual solution within five business

days after order

Just fill out online formwww.rehadapt.com/vms

or write an [email protected]

or download your worksheetwww.rehadapt.com/vms-worksheet

After 3 days!

After 5 days!

“Fast”only 3 business days and you can see a visual proposal in

detailed superimposed images

“Economical”no meetings, no travelling

efforts, no wait times required

“Simple”we provide illustrated

assembly instructions and an easy-to-handle order ID

1.

2.

3.

4.Youwin!

hightech in reach. products 2018 - · pdf filenew l3d mount from rehadapt more on pages 50...

Documents