NE4 FB Nebulizers

N4FB200 – Diameter 2 mm

N4FB400 – Diameter 4 mm

N4FB600 – Diameter 6 mm

Applications:

Spray Drying, Spray Chilling

Fluid Bed, Coating, Wastes treatment,

Biomaterials production, Water Treatment, …

Standard model: length 15cm

(available in different lengths)

®

Dye in polystyrene,

5 µm, CV 69%

(PSFB240S)

Shellac,

0.5-7 µm

(PSFB500S)

Maltodextrin,

0.3-4 µm

(PSFB500S)

Nanoclays suspension (15 %),

x50: 7 µm NE-4 N4FB6000 50 l/h

Lixiviate treatment,

X50: 19.7 µm ECFB1200 90º

NE4 inside

Spray Dryer

tank

cutting-edge technology to produce a spray of extremely

fine droplets within a desired range when monodispersion

is not strictly required

Consists in the micro-mixing of fluids using a

reflux cell

Pneumatic atomization with the highest

efficiency, up to 200 times more energy-

saving

Easily adjustable droplet size, up to tens of nm

Low energy consumption

Cost efficient, very competitive price for high quantities

Simple geometry, Robust performance and low maintenance

Scalable: easily adjustable to your capacity needs, scaling out and/or up

Versatility – Compatible with any liquids,

suspensions, polymeric solutionsand emulsions

– Verified for the following material:

Dissolutions:

Alginate, Quitosan, Shellac, Maltodextrine, …

Suspensions :

Clay, Lixiviates, Brine, …

Others

Fragrances and Perfumes, Urea, Oils,…

Glycerin, Creams, Paraffin

– Qualified for high concentrations and high viscosity:

• 0,9 up to 145.000cP

Viscosity Size range x50

1 cP from 3 to 53 microns

550 cP from 9 to 30 microns

3500 cP from 8 to 85 microns

13000 cP from 12 to 93 microns

53000 cP from 18 to 30 microns

145000 cP from 35 to 55 microns

Through small changes in operational conditions you obtain different

size ranges with no need to change your Flow Blurring® nebulizer

Our technological service offer Development & Production of high value microspheres based on our proprietary technology for Microencapsulation:

Study and evaluation of starting material.

Design of innovative solutions for the required application based on our technology.

Pre-formulation studies and technology fitting.

Microparticle characterization : morphology, composition, analytical methods, etc.

Initial studies: stability, drug delivery profiles…

Scale-up and microparticle production.PI Parque Plata. C/Camino Mozárabe, 4141900 Camas, Sevilla. España/Spain

T. (+34)954 081 214 F. (+34)955 9802258