high reliability lux meter series
TRANSCRIPT
For the FT3425 onlyPlease see www.hioki.com for list of supported regions.
LUX METER FT3424, FT3425
High reliability LUX METER seriesComplies with DIN Class B and JIS Class AA Compatible with LED/OLED lighting
From measurement to report creation
Cut work time in half
LUX METER built-in Bluetooth® wireless technology
New
Built-in Bluetooth® wireless technology FT3425
22
Hioki offers an auxiliary cart equipped with caster wheels so that it can be easily moved between measurement locations. The cart makes the measurement process significantly less physically demanding by eliminating the need to squat down to position the instrument or read its display. When using the FT3425 with a smartphone or tablet, there’s no need for a connection cable (see photograph on the first page of this catalog).
Recommended points
CONNECTION CABLEL9820 (option)
EXTENSION CARTZ5023 (option)
Measure without needing to crouch close to the ground. Also convenient for repeated measurements.
Reduce burden and fatigue
SENSOR UNIT
DISPLAY UNIT
20 lx range measurement resolution0.01 lx
Ideal for low-illuminance measurementSupport for measurement of 1 lx
Timer hold functionRetain the measured value after a user-selected amount of time has elapsed from the time the TIMER key is pressed. In this way, you can time measurement to occur after you have moved away from the lux meter so that measurement is not affected by clothing, shadows, etc.
Effect of shadow
Measurement delayed until operator is away from test area
BEEP
Large, easy-to-see LCD displayThe backlight turns on automatically whenever a measured value is retained in a low-illuminance environment.
CONNECTION CABLEL9820 (Option)
Measure with sensor and display units undocked
Sensor unit and main display can be separated to 2m, letting you measure at a distance away from the sensor in order to accommodate for difficult locations, shadows, and other issues.
Timer settings
Remaining time displaySelect from 5 / 10 / 15 / 20 / 30 / 45 / 60 sec.
Counts down with timer.
After the set time has elapsedThe measured value is retained. → The backlight turns on and the beep sounds for 3 sec.
Key Features
Transfer data saved in the instrument’s inter-nal memory to a computer via a USB connec-tion. Data can be saved as a text file.
Save measured values for multiple measurement locations in the instrument’s internal memory on the spot for later display at your convenience.
Memory function (up to 99 values)
Memory function makes multipoint measure-ment a breeze
Data communications functionality
FT3424LUX METER
CLEAR READ0ADJRANGE
POWER HOLD
MEMORY
AUTO / ESC
TIMERUSB connection
Record variations in illumi-nance with D/A output.
Output cord must be modified to suit the connected device.(Use a commercially available USB power adapter to supply power for extended periods of time.)
Output voltage 2 V/ range f.s.
FT3424LUX METER
CLEAR READ0ADJRANGE
POWER HOLD
MEMORY
AUTO / ESC
TIMER
➔
Hioki Voltage Logger LR5042
Other software functionalities• Display graphs and save files for user-specified time
intervals. (Data can also be saved manually.)• Display measured values on a computer screen in real time. Reduce your physical burden
EXTENSION CART Z5023 (option)
3
Snap pictures of drawings and CAD data. (image files).
Free smartphone app
Multi-point measurement capability is ideal forfinal inspections of electrical and lighting work
Measure and record results in all rooms where work was performed.The number of measurement locations ranges from a few points in single rooms to tens of thousands of points on large floors.Measurements must be made after the building is complete but before furnish-ings are installed, resulting in a rushed schedule and sometimes requiring work to be performed at night.Workers must compare readings with design data.
Create a report based on the recorded measured values after returning to the of-fice (where mistakes are likely due to reli-ance on visual observations, handwritten notes, and copying of results).Submit the report to the client.
“We want to complete the process of inspecting and recording results for
numerous locations quickly!”
“We want to accurately summarize an enormous volume of recorded
data in a report!”
Create report
Inspect(Illuminance measurement)
Record results
Present to client
FT3425 Built-in Bluetooth® wireless technology
Built-in Bluetooth® wireless technology
Solution: FT3425 Lux Meter
3
Tap the drawing on the screen to assign measured
values to the desired points and record them.
Measured illuminance data is automatically sent to your smart-phone or tablet, and you can assign measured values to par-ticular locations on drawings shown on the phone’s display.
Significantly shorten work times by preventing mistakes that can oc-cur during the inspection process, for example when visually observing measured values, jotting down handwritten memos, and entering data!
Simplify inspection, recording, report creation and submission with GENNECT Cross. (Free smartphone app)
Cut work time in half!Shorter
work timesNo more
errors
Send Email
List of measure-ment results
Generate PDF
List of mea-sured values
Easily create reports, output data as a CSV file, and send by email.
Create Re-port
Simulated report
HEADQUARTERS 81 Koizumi, Ueda, Nagano 386-1192 Japan TEL +81-268-28-0562 FAX +81-268-28-0568 http://www.hioki.com / E-mail: [email protected]
HIOKI USA CORPORATION TEL +1-609-409-9109 FAX +1-609-409-9108 http://www.hiokiusa.com / E-mail: [email protected] information correct as of Sept. 29, 2017. All specifications are subject to change without notice. FT3425E1-79E Printed in Japan
DISTRIBUTED BYHIOKI (Shanghai) SALES & TRADING CO., LTD. TEL +86-21-6391-0090/0092 FAX +86-21-6391-0360 http://www.hioki.cn / E-mail: [email protected]
HIOKI SINGAPORE PTE. LTD. TEL +65-6634-7677 FAX +65-6634-7477 E-mail: [email protected]
HIOKI KOREA CO., LTD. TEL +82-2-2183-8847 FAX +82-2-2183-3360 E-mail: [email protected]
HIOKI EUROPE GmbH TEL +49-6173-3234063 FAX +49-6173-3234064 E-mail: [email protected]
Note: Company names and Product names appearing in this catalog are trademarks or registered trademarks of various companies.*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HIOKI E.E. CORPORATION is under license.
Options
FT3424, FT3425 Specifications (Accuracy guaranteed for 2 years, Post-adjustment accuracy guaranteed for 2 years) Relative Spectral Response Characteristics in the Visible Spectrum
Angled Incident Light Characteristics
Angle Deviation from cosine characteristics30° ±2 %60° ±7 %80° ±25 %
Connection CableL9820Use when positioning the sensor unit and display unit separately during use.(length: 2 m)
Classification DIN 5032-7: 1985 class BJIS C 1609-1: 2006 general AA class
Light receiving element Silicon photo-diode
Display Display: 4 digit, 2000 count LCD Display unit: lx (lux)Display update rate: 500 ms ±20 ms
Measurement ranges
Range Measurement range Display step20 lx 0.00 lx to 20.00 lx
1 count/step200 lx 0.0 lx to 200.0 lx2000 lx 0 lx to 2000 lx
20000 lx 00 lx to 20000 lx 10 counts/step200000 lx 000 lx to 200000 lx 100 counts/step
Range selection Auto/ManualLinearity ±2% rdg. (Multiply by 1.5 for display values in excess of 3000 lx.)Accuracy guarantee conditions Sensor unit and display unit must bear the same identification number.Accuracy guarantee for temperature and humidity 21°C to 27°C (69.8°F to 80.6°F), 75% RH or less (non-condensing)
Characteristics [Temperature characteristics] ±3% rdg.[Humidity characteristics] ±3% rdg.
Response time Auto range: within 5 seconds, Manual range: within 2 secondsOutput specifications
Output methodOutput level
ResolutionOutput update rateOutput resistanceOutput accuracy
: D/A output: 2 V/range f.s.: 1 mV: 500 ms ±20 ms: 1.1 kW or less: ±1% rdg. ±5 mV(at output rate)
Power supply AA/LR6 alkaline battery ×2, R6 Manganese battery ×2, USB bus power 5 V DC
Continuous battery operation time
Approx. 300 hours (when using AA alkaline batteries, no Bluetooth® wireless technology)Approx. 80 hours (when using AA alkaline batteries, with Bluetooth® wireless technology)
Auto-power off Turns off the instrument 10 min. ±1 min. after the last key operation (can be canceled).
Operating temperature and humidity -10°C to 40°C (14°F to 104°F), 80% RH or less (non-condensing)Storage temperature and humidity -20°C to 50°C (-4°F to 122°F), 80% RH or less (non-condensing)Operating environment Indoors, pollution degree 2, altitude up to 2000 m (6562 ft.)Applicable standards Safety: EN61010, EMC: EN61326Standard compliance DIN 5032-7: 1985 class B, JIS C 1609-1: 2006 general AA classDust proof and waterproof IP40 (EN60529)Dimensions and mass(including the batteries)
Approx. 78W × 170H × 39D mm (3.07″ W × 6.69″ H × 1.54″ D)Approx. 310 g (10.9 oz.) (FT3424)/320 g (11.3 oz.) (FT3425)
Accessories
Instruction Manual ×1, AA/LR6 alkaline battery ×2, Sensor cap (with strap) ×1, Carrying case (soft) ×1, Strap ×1, USB cable (0.9 m) ×1, CD-R (USB driver, dedicated computer application software, and communications specifications) ×1, Precautions Concerning Use of Equipment that Emits Radio Waves ×1 (FT3425 only)
Interfaces USB2.0 (FT3424/FT3425), Bluetooth® 4.0LE (only FT3425)Bluetooth®communication software
Supported OSSupported Android devices
GENNECT CrossiOS 10 or later (Only for Bluetooth® low energy models) Android 4.3 or later (Only for Bluetooth® low energy models)
Range Output rate20 lx 1 mV DC/ 0.01 lx
200 lx 1 mV DC/ 0.1 lx2000 lx 1 mV DC/ 1 lx
20000 lx 1 mV DC/ 10 lx200000 lx 1 mV DC/ 100 lx
Handy for storing the instrument with the Output Cord L9094, USB cable, and Connection Cable L9820.
Carrying case C0202 (Soft case)
145W x 210H x 70D mm (5.7″ W × 8.27″ H × 2.76″ D)
Stores the Output Cord L9094 and a USB cable.
Carrying case C0201 (Semi-hard case)
137W x 193H x 69D mm(5.4″ W × 7.60″ H × 2.72″ D)
This cart with caster wheels can be easily moved between measurement locations. Use with the Connection Cable L9820 to check instrument readings from a standing posture. (The FT3425 can be paired with a smartphone, eliminating the need for a connection cable.)Extension pole length: Approx. 0.5 m to 1.6 m
EXTENSION CART Z5023
L9094Mini plug to banana1.5 m(4.92 ft) length
L9095Connect to BNC terminal1.5 m(4.92 ft) length
L9096Connect to terminal block1.5 m(4.92 ft) length
Output Cord
Only FT3425 is equipped with Bluetooth® wireless technology, others are shared specifications
Mounting method of instrument
Graph illustrates typical characteristics.Characteristics exhibited by individual products may vary slightly.
Oblique incident light characteristics
Model : LUX METER FT3424, FT3425Model No. (Order Code) (Note)FT3424FT3425 Built-in Bluetooth® wireless technology
n Data can be downloaded to tablets and smartphones using Hioki’s dedicated apps available from the Google Play or App Store. (FT3425 only)Search for “HIOKI” and download the “GENNECT Cross” app.
*Android, Google Play and the Google Play logo are trademarks of Google Inc.*iOS is a registered trademark of Cisco Technology, Inc. and/or its affiliates in the United States and certain other countries.*iPhone, iPad, iPad mini, iPad Pro and iPod touch are trademarks of Apple Inc.*Apple and the Apple logo are trademarks of Apple Inc. App Store is a service mark of Apple Inc.*Microsoft, Windows, Windows Vista, and Excel are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries.*Company names and Product names appearing in this catalog are trademarks or registered
trademarks of various companies.*The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and
any use of such marks by HIOKI E.E. CORPORATION is under license. *For the latest information about countries and regions where wireless operation is currently
supported, please visit the Hioki website.
Representative characteristic
Representative characteristic