high performance solutions in waterproofing...it is sbs (styrene butadiene styrene) modified,...

H i g h p e r f o r m a n c e s o l u t i o n s i n w a t e r p r o o f i n g

MEMBRANE PRODUCT CATALOG

ABOUT USOur company, which has been an active player in the Turkish construction chemicals

market for more than 20 years and continuing its business activities since 2011

as BAUMERK Construction Chemicals, is preparing to enter global market with its

highly-sought-after premium quality products. The company, whose product portfolio

contains construction chemicals and bitumen-based membrane products, added

construction paint products to its product range in 2015, uniting all the requirements

of the construction market under a single brand. BAUMERK enriches its customers

with wide array of unique and innovative products ranging from basic construction

materials through customized products to system solutions under 20 different

product groups contains up to 150 products.

The primary business focus of BAUMERK, which has set out on this path to

“Change the Chemistry of the Structure”, is to provide top-quality service to more

than 1000 customers in more than 55 countries, responds quickly and rapidly to

customer demands and add value to its customers with tailored pre and after sales

services. Investing in Research and Development activities conducted in a 22.500 m2

production facility in Hadımköy, and providing a valuable technical support to its

customers, BAUMERK stands out as a pioneering construction company that adds

value to the Turkish and Global Construction Sector.

OUR VISIONBecoming a global, eminent and highly-valued brand associated with providing

the most efficient industrial solutions.

OUR MISSIONUnderstanding the needs of the customers, providing quick, reliable, quality

and environmental friendly service and making the BAUMERK brand

a symbol of quality and trust.

12APP Modified, Bituminous Waterproofing Membrane for Bridge and Viaducts

14Self-Adhesive Membrane

10APP or SBS Modified, Bituminous, Anti-Root Membrane

08SBS Modified, Bituminous Waterproofing Membrane

04APP Modified, Bituminous Waterproofing Membrane

Description

It is APP (Atactic Polypropylene) modified, torch-on plastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones).

Fields of Application

It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, retaining walls, concrete channels as well as bathrooms and any wet surfaces.

Features and Benefits

• Flexible and long lasting.• Applicable on different kind of surfaces.• Has high elongation and tensile strength.• Resistant to aggressive effect of the soil.• Easily applied to the details of dilation, edges of chimney and parapet returns etc.

Surface Preparation

Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet. It is recommended to use the B PR 100 as a primer on the application surface for accomplish application.

Application

10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be aid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest.

05

APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE


-5 °C Series Technical SpecificationsSPECIFICATION UNIT C 2000 C 3000 C 4000 C 3000 AL P 3000 AL P 4000 AL

Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester Fiberglass Polyester Polyester

Modified - APP APP APP APP APP APP APP APP APP APP

Thickness mm (±0,2) 2 3 4 3 4 3.5 4.5 3 3 4

Flow Resistance °C >110 >110 >110 >110 >110 >110 >110 >110 >110 >110

Cold Bending °C -5 -5 -5 -5 -5 -5 -5 -5 -5 -5

Tensile Strength (MD/CMD) N/5 cm 300/200 300/200 400/300 600/400 600/400 600/400 600/400 300/200 600/400 600/400

Elongation at Break (MD/CMD) % 2/2 2/2 2/2 30/30 30/30 30/30 30/30 2/2 30/30 30/30

Upper Surface Coating - PE PE PE PE/Sand PE/Sand Slated Slated AL AL AL

Sub Surface Coating - PE PE PE PE PE PE PE PE PE PE

Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10 1x10

P 40 K - P 40 YP 40 G - P 40 W

P 3000P 3000 S

P 4000P 4000 S

P 50 K - P 50 YP 50 G - P 50 W

-10 °C Series Technical SpecificationsSPECIFICATION UNIT C 2000 C 3000 C 4000 C 3000 AL P 3000 AL P 4000 AL


Modified - APP APP APP APP APP APP APP APP APP APP

Thickness mm (±0,2) 2 3 4 3 4 3.5 4.5 3 3 4


Cold Bending °C -10 -10 -10 -10 -10 -10 -10 -10 -10 -10






P 50 K - P 50 YP 50 G - P 50 W

06

1 PE Film2 APP Modified Bitumen3 Polyester Felt or Fiberglass4 APP Modified Bitumen5 PE Film, Slated, Silica Sand or Aluminum Foil

12 3

45

P 3000P 3000 S

P 4000P 4000 S

P 40 K - P 40 YP 40 G - P 40 W

W(WHITE)

G(GREY)

K(RED)

Y(GREEN)

Polyethylene Film

PEAluminum

FoilAL

W Series Technical SpecificationsSPECIFICATION UNIT WF 2000 WF 3000 WP 3000 WP 4000 WF 3000 AL WP 3000 AL

Reinforcement - Fiberglass Fiberglass Polyester Polyester Polyester Fiberglass Polyester

Modified - APP APP APP APP APP APP APP

Unit Weight kg/m2 2 3 3 4 4 3 3

Flow Resistance °C >110 >110 >110 >110 >110 >110 >110

Cold Bending °C -5 -5 -5 -5 -5 -5 -5

Tensile Strength (MD/CMD) N/5 cm 300/200 300/200 600/400 600/400 600/400 300/200 600/400

Elongation at Break (MD/CMD) % 2/2 2/2 30/30 30/30 30/30 2/2 30/30

Upper Surface Coating - PE PE PE PE Slated AL AL

Sub Surface Coating - PE PE PE PE PE PE PE

Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10 1x10 1x10

WP 40 K - WP 40 YWP 40 G - WP 40 W

S-line Series Technical SpecificationsSPECIFICATION UNIT C 2000 C 3000 P 3000 P 4000

Reinforcement - Fiberglass Fiberglass Polyester Polyester Polyester

Modified - APP APP APP APP APP

Unit Weight kg/m2 2,4 3,6 3,6 4,5 4,5

Flow Resistance °C >110 >110 >110 >110 >110

Cold Bending °C -5 -5 -5 -5 -5

Tensile Strength (MD/CMD) N/5 cm 300/200 300/200 600/400 600/400 600/400

Elongation at Break (MD/CMD) % 2/2 2/2 30/30 30/30 30/30

Upper Surface Coating - PE PE PE PE Slated

Sub Surface Coating - PE PE PE PE PE

Roll size (Width x Length) m 1x15 1x10 1x10 1x10 1x10

P 40 K - P 40 YP 40 G - P 40 W

07

12 3

45


W(WHITE)

G(GREY)

K(RED)

Y(GREEN)

Polyethylene Film

PEAluminum

FoilAL

1 PE Film2 APP Modified Bitumen3 Polyester Felt or Fiberglass4 APP Modified Bitumen5 PE Film, Slated or Aluminum Foil

09

SBS MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE

-20 °C Series Technical SpecificationsSPECIFICATION UNIT EC 2000 EC 3000 EC 4000 EC 3000 AL EP 3000 AL EP 4000 AL


Modified - SBS SBS SBS SBS SBS SBS SBS SBS SBS SBS

Thickness mm (±0,2) 2 3 4 3 4 3.5 4.5 3 3 4


Cold Bending °C -20 -20 -20 -20 -20 -20 -20 -20 -20 -20






EP 40 K-EP 40 YEP 40 G-EP 40 W

EP 50 K-EP 50 YEP 50 G-EP 50 W

Description

It is SBS (Styrene Butadiene Styrene) modified, torch-on elastomeric waterproofing membranes with fiberglass or non-woven spunbond polyester felt; both sides are coated with polyethylene film or one side coated with polyethylene film, the other side is coated with silica sand, aluminum foil or natural or colored slate chippings (mineral stones).


It is used in curtain walls, foundations, and projects with high tensile requirements, basement walls, balconies, terrace roofs, inclined roofs, water tanks, manmade ponds, retaining walls, concrete channels as well as bathrooms and any wet surfaces.


• Applicable on different kind of surfaces at cold temperature because of high elastic property.• Has high elongation and tensile strength.• Resistant to aggressive effect of the soil.• Easily applied to the details such as dilation, edges of chimney and parapet returns.

Surface Preparation

Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Recommended to use B PR 100 Bitumen Primer is used as a primer before the application of membrane to accomplish finish.

Application

10 cm overtopping shall be allowed for joints and 15 cm overtopping for ends by using welding torch. The surface coated with mineral stone on joints should be heated and minerals should be buried in to the bituminous surface by using trowel before welding the joints together. The transverse joints of the first layer covering should be laid down in an offset position. For the top layer, longitudinal and transverse joints of the first layer should be centered. Roof covers should be laid perpendicular to the slope from the point where the slope is lowest.

EP 3000EP 3000 S

EP 4000EP 4000 S

1 PE Film2 SBS Modified Bitumen3 Polyester Felt or Fiberglass4 SBS Modified Bitumen5 PE Film, Slated, Silica Sand or Aluminum Foil

12 3

45

W(WHITE)

G(GREY)

K(RED)

Y(GREEN)

Polyethylene Film

PEAluminum

FoilAL

11

APP or SBS MODIFIED, BITUMINOUS, ANTI-ROOT MEMBRANE

Description

It is APP (Atactic Polypropylene) or SBS (Styrene Butadiene Styrene) modified, special anti-root additives content, torch-on plastomeric or elastomeric waterproofing membranes with non-woven spunbond polyester felt; both sides are coated with polyethylene film.


It can be applied to structural details of gardens, terraces and terrace roofs, and it eliminates the risk that plant roots damage through the waterproofing coating.


• Flexible and long lasting.• Easy to applied on different kind of substrates.• Has high elongation and tensile strength.• Resistant to aggressive effect that may come from the soil.• Easy to applied on dilatation, edge of chimney and parapet returns.

Surface Preparation

Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Before the application B PR 100 Bitumen Primer is applied as a primer to obtain better finish.

Application


Green Series Technical SpecificationsSPECIFICATION UNIT P 3000 P 4000 EP 3000 EP 4000

Reinforcement - Polyester Polyester Polyester Polyester

Modified - APP APP SBS SBS

Thickness mm (±0,2) 3 4 3 4

Flow Resistance °C >120 >120 >100 >100

Cold Bending °C -10 -10 -20 -20

Tensile Strength (MD/CMD) N/5 cm 800/600 800/600 800/600 800/600

Elongation at Break (MD/CMD) % 35/35 35/35 35/35 35/35

Upper Surface Coating - PE PE PE PE

Sub Surface Coating - PE PE PE PE

Roll size (Width x Length) m 1x10 1x10 1x10 1x10

1 Soil or Plant2 Geotextile3 Drain Dimple Board4 Green Series Membrane5 B PR 100 Bitumen Primer6 Leveling concrete 7 Concrete

1 PE Film2 APP or SBS Modified Bitumen3 Polyester Felt4 APP or SBS Modified Bitumen5 PE Film

12 3

45

Polyethylene Film

PE

13

APP MODIFIED, BITUMINOUS WATERPROOFING MEMBRANE FOR BRIDGE and VIADUCTS

Description

It is APP (Atactic Polypropylene) modified plastomeric waterproofing membrane with non-woven spunbond polyester felt; both sides are coated with polyethylene film or silica sand; suitable use in bridge, viaducts and roads.


In bridge, road and viaducts for waterproofing purposes.


• Flexible and long lasting.• Applicable on different kind of surfaces.• Has high elongation and tensile strength. • Resistant to aggressive effect of the soil.• Easily applied to the details of dilation, edges of chimney and parapet returns etc.

Surface Preparation

Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. It is recommended to use the B PR 100 as a primer on the application surface for accomplish application.

Application


Viaducts Series Technical SpecificationsSPECIFICATION UNIT P 4000/P 4000 S P 5000/P 5000 S

Reinforcement - Polyester Polyester

Modified - APP APP

Thickness mm (±0,2) 4 5

Flow Resistance °C >120 >120

Cold Bending °C -10 -10

Tensile Strength (MD/CMD) N/5 cm 1000/800 1000/800

Elongation at Break (MD/CMD) % 40/40 40/40

Upper Surface Coating - PE/Sand PE/Sand

Sub Surface Coating - PE PE

Roll size (Width x Length) m 1x10 1x8

1 PE Film2 APP Modified Bitumen3 Polyester Felt4 APP Modified Bitumen5 PE Film or Silica Sand

12 3

45

Polyethylene Film

PE

15

SELF-ADHESIVE MEMBRANE

Self Membrane Technical SpecificationsSPECIFICATION UNIT SELF F-1000 SELF F-1500 SELF F-2000 SELF P-1500 SELF P-2000 SELF P-3000 SELF P-4000

Reinforcement - Fiberglass Fiberglass Fiberglass Polyester Polyester Polyester Polyester

Modified - SBS SBS SBS SBS SBS SBS SBS

Thickness mm (±0,2) 1,0 1,5 2,0 1,5 2,0 3,0 4,0

Flow Resistance °C 100 100 100 100 100 100 100

Cold Bending °C -20 -20 -20 -20 -20 -20 -20

Tensile Strength (MD/CMD) N/5 cm 300/200 300/200 300/200 600/400 600/400 800/600 800/600

Elongation at Break (MD/CMD) % 2/2 2/2 2/2 30/30 30/30 35/35 35/35

Upper Surface Coating - PE PE PE PE PE PE PE

Sub Surface Coating - PP PP PP PP PP PP PP

Roll size(Width x Length) m 1x20 1x15 1x15 1x15 1x15 1x10 1x10


• Easy to applied, flexible and long lasting.• Self-adhesive.• Easy to applied on different kind of substrates.• Has high elongation and tensile strength.• Resistant to aggressive effect that may come from the soil.• Easy to applied on dilatation, edge of chimney and parapet returns.• Applicable at low temperature.

Surface Preparation

Application substrate should be cleaned off loose pieces, oil and other chemicals. Surface defects are repaired with the suitable REPAMERK repair mortars, corners are chamfered with PH 55 bitumen fillet tape. Surface must be clean and dry for obtaining well adhesion. Before the application B PR 100 Bitumen Primer is applied on concrete and after curing of primer, Self Membrane is adhered on dry surface.

Application

Self Membrane is ready to use after peel off the film on it.

Description

It is a bituminous, SBS and special additives content, highly flexible, self-adhesive and long-lasting waterproofing membrane with fiberglass or non-woven spunbond polyester felt that one side is covered with polyethylene film and other side has peelable polypropylene.


• In terraces and sloping concrete roofs.

• In light metal roofs as a first layer insulation membrane.

• Suitable for cold temperature application, used a first layer in all kind of flexibility required surfaces for waterproofing purposes or in heat insulation layers (XPS - EPS).

• Adhere on different kind of surfaces such as wood, plastic, glass, concrete etc. with this feature can be used on walls, parapets, chimneys, eaves, in the roof cracks, insulation coating of deck of boat, automotive industry etc.

1 Removable Film2 SBS Modified Bitumen3 Fiberglass or Polyester Felt4 SBS Modified Bitumen5 PE Film1

2 34

5

Polypropylene Film

PP

Polyethylene Film

PE

MEMBRANE PRODUCT CATALOG

Baumerk Yapı ve Kimya San. Tic. Ltd. Şti.Dursunköy Mah. Uygur Cad. No:44 34555Hadımköy-Arnavutköy-İstanbul/TÜRKİYE

T. +90 212 438 7 888F. +90 212 438 6 705

[email protected]

high performance solutions in waterproofing...it is sbs (styrene butadiene styrene) modified,...

Documents