high performance site components combiners_filters.pdftriple band combiner frequency range...
TRANSCRIPT
High performance site components
Introduction
Egant AB is one of the leading suppliers of products for Cellularinfrastructure.
Specialised in products that makes it possible to shareantenna systems, combining signals and designing cost effective mobile networks.
Egant AB works close together with its customers to make solutions and projects optimized for today’s demands.Giving you products that is always in the latest design and highest technology.
Our design centre in Stockholm Sweden is always happy for new challenges and welcomes all new projects and design ideas.
More information can be found at: www.egant.se
EGANT ABBox 945114 79 StockholmSwedenTel: +46 (0)8 6200 650Email: [email protected]: www.egant.se
Quad Band Combiner www.egant.se
Frequency range Description Connector Ordering numberQuad Band Combiner380-960, 1800, 2100, 2600MHz Quad Band Combiner 7/16(f) EG 601 0121
Quad Band CombinerTETRA/GSM900, GSM1800, UMTS, LTE2600
Combines 4 RBSs into 1 antenna port
This Quad Band Combiner enables the con-nection of 4 Radio Base Stations to the com-biner:
1 TETRA/GSM900 Radio Base Station1 GSM1800 Radio Base Station1 UMTS Radio Base Station1 LTE2600 Radio Base Station
The combiner combines the 4 signals to1 antenna port, or splits the signal to the 4 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our quad band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Quad Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Tetra - GSM900 Port 2: GSM1800 Port 3: UMTS Port 4: LTE2600
Insertion loss:
Input return loss:Isolation between systems: Max input power/port:Port 1:Port 2:Port 3:port 4:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
DC by-pass between all inputs to output:
EG 602 0121 380- 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz2500-2690MHz
< 0.30 dB
> 18 dB> 50 dB
< 300 W< 300 W< 300 W< 200 W
50 Ohm
<-110 dBm (153 dBc)
1A, max, per input
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
260 x 50 x 220 mm7/16 (f) 4 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP66
Triple Band Combiner www.egant.se
Frequency range Description Connector Ordering numberTriple Band CombinersDC-2170, 2400-2500, 5000-6000MHz Triple Band Combiner N(f) EG 602 015188-108, 376-495, 1570-1580MHz Triple Band Combiner 7/16(f) EG 602 0044376-480, 880-960, 1710-1880MHz Triple Band Combiner 7/16(f) EG 602 0178376-500, 880-960, 1920-2170MHz Triple Band Combiner 7/16(f) EG 602 0080806-960, 1710-1880, 1920-2170MHz Triple Band Combiner 7/16(f) EG 100 9012880-960, 1710-1880, 1920-2170MHz Triple Band Combiner SMA(f) EG 100 9019880-960, 1710-1880, 1920-2170MHz Triple Band Combiner N(f) EG 602 0041880-960, 1920-2170, 2500-2690MHz Triple Band Combiner 7/16(f) EG 602 0150
Triple Band CombinerDC-2170MHz, 2400-2500MHz,5000-6000MHz
This triple band combiner combines cellular networks with local wireless networks.The combiner combines the 3 signals to1 antenna port, or splits the signal in the re-ceiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Port 2: Port 3:
Insertion loss: Port 1: - ANT Port 2: - ANT Port 3: - ANT
Input return loss:Isolation between systems: Max input power/port:
Impedance in/out:
Intermodulation:IM 3, 2 x 43 dBm:
EG 602 0151 DC - 2170 MHz 2400 - 2500 MHz 5000 - 6000 MHz
< 1.2 dB < 1.5 dB < 0.7 dB
> 14.0 dB> 45 dB
50W, (max 50W total)
50 Ohm
<-107 dBm (150 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
222 x 25 x 127 mmN (f) 1.6 kg
Environmental Specifications Temp. range (normal operation):Humidity:
Egant reserves the right to change this product specification at any time
without notice.
-0 to +55º CRelative 5 - 100%
Triple Band Combiner160MHz, TETRA, GPS
Combines 3 Radio Systems into 1 An-tenna Port
This triple band combiner enables the connec-tion of 3 Systems to the combiner:
1 160MHz System1 TETRA System1 GSP System
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 Systems in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple Radio Systems to the shared antennas.
Reduces cost
By utilizing the Egant triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: 160MHz Port 2: TETRA Port 3: GPS
Insertion loss: Port 1: 160MHz - ANT Port 2: TETRA - ANT Port 3: GPS - ANT
Input return loss:Isolation between systems: Max input power/port:Port 1: 160MHz Port 2: TETRA Port 3: GPS
Impedance in/out:
EG 602 0044 88 - 180 MHz 376 - 495 MHz 1570 - 1580 MHz
< 0.9 dB < 0.9 dB < 0.5 dB
> 14.0 dB> 30 dB
10 W20 W10 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
350 x 130 x 60 mm7/16 (f) 3,5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP65
Triple Band CombinerTETRA, GSM900, GSM1800
Combines 3 RBSs into 1 antenna port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 TETRA Radio Base Station1 GSM900 Radio Base Station1 GSM1800 Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: TETRA Port 2: GSM900 Port 3: GSM1800
Insertion loss: Port 1: TETRA - ANT Port 2: GSM900 - ANT Port 3: GSM1800 - ANT
Input return loss:
Isolation between systems: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0178 376 - 480 MHz 880 - 960 MHz 1710 - 1880 MHz
< 0.30 dB, typ 0,15dB < 0.55 dB, typ 0,3dB < 0.65 dB, typ 0,4dB
> 18.0 dB
> 50 dB
< 100 W
50 Ohm
153 dBc
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
300 x 150 x 500 mm7/16 (f) 8 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP66
Triple Band CombinerTETRA, GSM900, UMTS
Combines 3 RBSs into 1 antenna port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 TETRA Radio Base Station1 GSM900 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: TETRA Port 2: GSM900 Port 3: UMTS
Insertion loss: Port 1: TETRA - ANT Port 2: GSM900 - ANT Port 3: UMTS - ANT
Input return loss:Isolation between systems: Max input power/port:Port 1: TETRA Port 2: GSM900 Port 3: UMTS
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0080 376 - 500 MHz 880 - 960 MHz 1920 - 2170 MHz
< 0.30 dB, typ 0,15dB < 0.55 dB, typ 0,3dB < 0.65 dB, typ 0,4dB
> 18.0 dB> 50 dB
< 200 W< 200 W< 100 W
50 Ohm
153 dBc
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
300 x 150 x 500 mm7/16 (f) 8 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP66
Triple Band Combiner/Dual Band Combiner UMTS, GSM1800, GSM900 / GSM1800, UMTS
Combines 3 RBSs into 1 antenna port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station1 GSM1800 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefi ts of antenna sharing.
Dual Band Combiner - combines 2 RBSs into 1 antenna port
The dual band combiner enables you to connect 2 Radio Base Stations to the combiner:
1 GSM1800 Radio Base Station1 UMTS Radio Base Station
GSM
900
GSM
900
GSM
180
0G
SM 1
800
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevF
Technical Specifi cations for the Triple Band Combiner/Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: GSM900Port 2: GSM1800Port 3: UMTS
Insertion loss:Port 1: GSM900 - ANTPort 2: GSM1800 - ANTPort 3: UMTS - ANT
Input return loss:Isolation between systems:
Max input power/port:Port 1: GSM900Port 2: GSM1800Port 3: UMTS
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
DC by-pass between all inputs to output:
EG 100 9012
698 - 960 MHz1710 - 1880 MHz1920 - 2170 MHz
< 0.20 dB < 0.30 dB < 0.45 dB
> 21.0 dB> 50 dB
< 200 W< 200 W< 100 W
50 Ohm
<-110 dBm (153 dBc)
1A, max, per input
EG 100 9009
1710 - 1880 MHz1920 - 2170 MHz
< 0.40 dB < 0.45 dB
> 20.0 dB> 50 dB
< 200 W< 100 W
50 Ohm
<-110 dBm (153dBc)
1A, max, per input
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
230 x 200 x 555 mm7/16 (f)3.6 kg
245 x 210 x 50 mm7/16 (f)3.6 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-40 to +70º CRelative 5 - 100%IP66
-40 to +70º CRelative 5 - 100%IP66
Triple Band CombinerUMTS, GSM1800, GSM900
Combines 3 RBSs into 1 Antenna Port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station1 GSM1800 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
GSM
900
GSM
900
GSM
180
0G
SM 1
800
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: GSM900 Port 2: GSM1800 Port 3: UMTS
Insertion loss: Port 1: GSM900 - ANT Port 2: GSM1800 - ANT Port 3: UMTS - ANT
Input return loss:Isolation between systems: Max input power/port:Port 1: GSM900 Port 2: GSM1800 Port 3: UMTS
Impedance in/out:
EG 100 9019 880 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz
< 1.3 dB < 1.3 dB < 1.3 dB
> 16.0 dB> 30 dB
20 W20 W20 W
50 Ohm
EG 602 0041
880 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz
< 1.3 dB < 1.3 dB < 1.3 dB
> 16.0 dB> 30 dB
20 W20 W20 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
195 x 130 x 30 mmSMA (f) 1 kg
195 x 130 x 30 mmN (f)1 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP65
-40 to +70º CRelative 5 - 100% IP65
Triple Band CombinerGSM900, UMTS, LTE2600MHz
Combines 3 RBSs into 1 antenna port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station1 UMTS Radio Base Station1 LTE2600 Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev C
Technical Specifications for the Triple Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: GSM900 Port 2: UMTS Port 3: LTE2600
Insertion loss: Port 1: GSM900 - ANT Port 2: UMTS - ANT Port 3: LTE - ANT
Input return loss:Isolation between systems: Max input power/port: Port 1: GSM900Port 2: UMTSPort 3: LTE2600
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0150 880 - 960 MHz 1920 - 2170MHz 2490 - 2690 MHz
< 0.25 dB < 0.25 dB < 0.25 dB
> 18.0 dB> 50 dB
< 300 W< 300 W< 300 W
50 Ohm
<-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
230 x 50 x 200 mm7/16 (f) 3.6 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +65º CRelative 5 - 100% IP66
Dual Band Combiner www.egant.se
Frequency range Description Connector Ordering numberDual Band Combiners68-470, 791-862MHz Dual Band Combiner 7/16(f) EG 602 018268-500, 700-2700MHz Dual Band Combiner N(f) EG 602 011568-500, 700-2700MHz Dual Band Combiner 7/16(f) EG 602 012068-500, 790-2700MHz Dual Band Combiner 7/16(f) EG 602 007268-470, 870-970MHz Dual Band Combiner N(f) EG 100 901568-470, 870-970MHz Dual Band Combiner 7/16(f) EG 100 901668-470, 870-970MHz Dual Band Combiner 7/16(f) EG 100 901768-2170, 2400-2500MHz Dual Band Combiner 7/16(f) EG 602 000780-240, 376-480MHz Dual Band Combiner N(f) EG 602 018380-240, 376-480MHz Dual Band Combiner N(f) EG 602 018480-240, 376-480MHz Dual Band Combiner 7/16(f) EG 602 003880-240, 376-480MHz Dual Band Combiner 7/16(f) EG 602 003080-960, 1710-2700MHz Dual Band Combiner N(f) EG 602 011180-960, 1710-2700MHz Dual Band Combiner 7/16(f) EG 602 0108155-500, 1575-1576MHz Dual Band Combiner 7/16(f) EG 602 0049376-500, 1920-2170MHz Dual Band Combiner N(f) EG 602 0045376-500, 1920-2170MHz Dual Band Combiner 7/16(f) EG 602 0046376-2170, 2400-2500MHz Dual Band Combiner N(f) EG 100 9018376-2170, 2400-2500MHz Dual Band Combiner 7/16(f) EG 100 9028376-2170, 2400-2500MHz Dual Band Combiner 7/16(m),7/16(f), N(f) EG 602 0007376-2170, 2500-2700MHz Dual Band Combiner N(f) EG 602 0076376-2170, 2500-2700MHz Dual Band Combiner 7/16(f) EG 602 0074380-395, 410-425MHz Dual Band Combiner N(f) EG 602 0023
Dual Band Combiner www.egant.se
380-395, 410-425MHz Dual Band Combiner 7/16(f) EG 602 0024380-395, 440-450MHz Dual Band Combiner 7/16(f) EG 602 0191380-395, 442,975-448,975MHz Dual Band Combiner N(f) EG 602 0176380-395, 450-470MHz Dual Band Combiner N(f) EG 602 0094790-862, 880-960MHz Dual Band Combiner N(f) EG 602 0112790-862, 880-960MHz Dual Band Combiner 7/16(f) EG 602 0097790-1000, 1710-2170MHz Dual Band Combiner 7/16(f) EG 602 0110800-1000, 1710-2170MHz Dual Band Combiner N(f) EG 100 9014800-1000, 1710-2170MHz Dual Band Combiner 7/16(f) EG 100 9013880-960, 1710-1880MHz Dual Band Combiner 7/16(f) EG 602 0034890-960, 1710-2700MHz Dual Band Combiner 7/16(f) EG 602 00961710-1880, 1920-2170MHz Dual Band Combiner 7/16(f) EG 100 9009
Dual Band Combiner TETRA / LTE80068 - 470 MHz / 791 - 862 MHz
Combines 2 RBSs into 1 antenna port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Radio Base Station1 LTE800 Radio Base Station
The combiner combines the 2 signals to the antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefi ts of antenna sharing.
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevB
Technical Specifi cations for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: TETRAPort 2: LTE800
Insertion loss:Port 1: TETRAPort 2: LTE800
Input return loss:Isolation between systems:
Max input power/port:Port 1: TETRAPort 2: LTE800Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0182
68 - 470 MHz791 - 862 MHz
< 0.3 dB < 0.5 dB
> 18.0 dB> 50 dB
150 W100 W50 Ohm
< -110 dBm (153 dBc)
Mechanical Specifi cations Dimensions (W x H x D):Connectors:Weight:
128 x 177 x 28 mm7/16 (f)2 kg
Environmental Specifi cations Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at
any time without notice.
-20 to +65º CRelative 5 - 100%IP65
Dual Band Combiner TETRA / GSM90068 - 470 MHz / 870 - 970 MHz
Combines 2 RBSs into 1 antenna port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Radio Base Station1 GSM900 Radio Base Station
The combiner combines the 2 signals to the antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
TETR
ATE
TRA
GSM
900
GSM
900
ANTANT
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: TETRA Port 2: GSM900
Insertion loss: Port 1: TETRA Port 2: GSM900
Input return loss:Isolation between systems: Max input power/port:Port 1: TETRA Port 2: GSM900 Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 100 9015 68 - 470 MHz 870 - 970 MHz
< 0.1 dB < 0.3 dB
> 18.0 dB> 50 dB
250 W250 W50 Ohm
< -110 dBm (153 dBc)
EG 100 9016 68 - 470 MHz 870 - 970 MHz
< 0.1 dB < 0.3 dB
> 18.0 dB> 50 dB
250 W250 W50 Ohm
< -110 dBm (153 dBc)
EG 100 9017
68 - 470 MHz870 - 970 MHz
< 0.1 dB< 0.3 dB
> 18.0 dB> 50 dB
250 W250 W50 Ohm
< -110 dBm (153 dBc) Mechanical Specifications Dimensions (W x H x D):Connectors:Weight:
128 x 177 x 28 mmN (f) 2 kg
128 x 177 x 28 mm7/16 (f) 2.6 kg
128 x 177 x 327/16 (f)2.8 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at
any time without notice.
-40 to +70º CRelative 5 - 100% IP65
-40 to +70º CRelative 5 - 100% IP65
-40 to +70º CRelative 5 - 100%IP68
Dual Band Combiner68 - 500 MHz / 700 - 2700 MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: Low band - ANT Port 2: High band - ANT
Input return loss:
Isolation between systems:Port 1: - ANT
Port 2: - ANT700 - 800 MHz800 - 2500 MHz2500 - 2700MHz Max input power/port:
Intermodulation: IM3, 2 x 43 dBm: Impedance in/out:
EG 602 0115 68 - 500 MHz 700 - 2700 MHz
< 0.3 dB, typ 0,15dB < 0.5 dB, typ 0.3dB
> 16.0 dB, typ 20dB
> 50 dB
> 40 dB> 50 dB> 30 dB
< 50 W < -150 dBc 50 Ohm
EG 602 0120 68 - 500 MHz 700 - 2700 MHz
< 0.3 dB, typ 0,15dB < 0.5 dB, typ 0.3dB
> 16.0 dB, typ 20dB
> 50 dB
> 40 dB> 50 dB> 30 dB
< 50W < -150 dBc 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
235 x 35 x 130 mmN (f) 1.5 kg
235 x 20 x 130 mm7/16 (f) 1.0 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
Dual Band Combiner68 - 500 MHz / 790 - 2700 MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
6868-- 5
00M
Hz
500M
Hz
ANT1ANT1
790
790 --
2700
MH
z27
00M
Hz
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: Low band - ANT Port 2: High band - ANT
Input return loss:68 - 500 MHz
790 - 960 MHz1710 - 1880 MHz1920 - 2170 MHz2500 - 2700MHz
Isolation between systems:Port 1: - ANTPort 2: - ANT Max input power/port: Port 1: Low band Port 2: High band
Intermodulation: IM3, 2 x 43 dBm:
Impedance in/out:
EG 602 0072 68 - 500 MHz 790 - 2700 MHz
< 0.3 dB, typ 0.15dB< 0.4 dB, typ 0.15dB
> 18.0 dB
> 16.0 dB> 18.0 dB> 18.0 dB> 16.0 dB > 40 dB> 50 dB
< 300 W< 500 W <-110 dBm (153 dBc)
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
265 x 55 x 120 mm7/16 (f) 1.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-30 to +70º CRelative 5 - 100% IP65
Dual Band Combiner W-LAN376 - 2500 MHz TETRA, GSM900, GSM1800, UMTS, W-LAN
Add W-LAN to your antenna system
Installing the dual band combiner W-LAN enables you to add W-LAN to your cellular antenna system. After installning the W-LAN combiner and an access point you are up and running with a high speed W-LAN system.
This is a highly important feature when de-signing shared antenna systems wishing to add W-LAN capability to your system.
Save money
The dual band combiner W-LAN offers addi-tional benefits by opening up W-LAN capa-bility to your existing antenna system.
The sleek and easily installed combiner has a broad-banded spectrum with low insertion loss and low intermodulation.
W-LA
NW
-LAN
Access point
Access point
376-2500MHz
376-2170MH
z
W-LA
NW
-LAN
InjectorInjector
W-LA
NW
-LAN
Access point
Access point
376-2500MHz
376-2170MH
z
W-LA
NW
-LAN
InjectorInjector
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for Dual Band Combiner W-LANBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Port 2: Port 3:
Input return loss:68 - 2170 MHz:2400 - 2500 MHz:
Insertion loss:Port 2 - Port 1 (ANT): 68 - 2170 MHz:Port 3 - Port 1 (ANT): 2400 - 2500 MHz:
Isolation: Port 2 - Port 3, Port 3 - Port 2
Max input power/port:
3rd order intermodulation:IM3, 2 x 43 dBm:
Impedance in/out:
EG 100 9018 376 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
EG 100 9028 376 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
EG 602 0007 68 - 2500 MHz 68 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
180 x 28 x 140 mmN (f) 1.6 kg
180 x 32 x 140 mm7/16 (f) 1.9 kg
180 x 32 x 140 mm7/16 (f), 7/16 (m), N (f) 1.9 kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-35 to +70º CRelative 5 - 100% IP65
-35 to +70º CRelative 5 - 100% IP65
-35 to +70º CRelative 5 - 100% IP65
Dual Band Combiner 80 - 240 MHz / 376 - 480 MHz
Combines FM + VHF + DAB and TETRAinto one antenna port
This dual band combiner enables the connec-tion of these two systems to the combiner:
1 FM + VHF + DAB Input1 TETRA Radio Base Station
The combiner combines the two signals intoone antenna port, or splits the signal into the two input systems in the receiving direction.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the inputs into the com-biner it will immediately render you all the benefi ts of antenna sharing.
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevB
Technical Specifi cations for the FM + VHF + DAB / TETRA Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: FM + VHF + DABPort 2: TETRA
Insertion loss:
Input return loss:
Isolation between systems:
Max input power/port:
Impedance in/out:
DC-Bypass
EG 602 0183
80 - 240 MHz376 - 480 MHz
< 0.5 dB
> 16.0 dB
> 50 dB
< 40 W
50 Ohm
Port 1 - Ant
EG 602 0184
80 - 240 MHz376 - 480 MHz
< 0.5 dB
> 16.0 dB
> 50 dB
< 40 W
50 Ohm
Port 1 - Ant
Mechanical & Environmental Specifi cations Dimensions (W x H x D):Connectors:Weight:Sealing:
95 x 23 x 75 mmN (f)0.5 kgIP65
95 x 23 x 75 mmN (f)0.5 kgIndoor use
Egant reserves the right to change this product specifi cation at
any time without notice.
Dual Band Combiner FM + VHF + DAB / TETRA 80 - 240 MHz / 376 - 480 MHz
Combines FM + VHF + DAB and TETRAinto one antenna port
This dual band combiner enables the connec-tion of these two systems to the combiner:
1 FM + VHF + DAB Input1 TETRA Radio Base Station
The combiner combines the two signals intoone antenna port, or splits the signal into the two input systems in the receiving direction.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the inputs into the com-biner it will immediately render you all the benefi ts of antenna sharing.
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevF
Technical Specifi cations for the FM + VHF + DAB / TETRA Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: FM + VHF + DABPort 2: TETRA
Insertion loss:Port 1: 80 - 108 MHzPort 1: 108 - 174 MHzPort 1: 174 - 240 MHzPort 2: TETRA
Input return loss:
Isolation between systems: Port 1 - 2: 80 - 108 MHz, 108 - 240 MHz Port 2 - 1: 376 - 480 MHz
Max input power/port:Port 1: Port 2:Impedance in/out:DC-Bypass
EG 602 0030
80 - 240 MHz376 - 480 MHz
< 0.5 dB < 0.5 dB< 0.5 dB< 0.5 dB
> 18.0 dB
> 40 dB> 40 dB
> 20 W> 20 W50 Ohm Port1 - Ant
EG 602 0038
80 - 240 MHz376 - 480 MHz
< 0.5 dB < 0.5 dB< 0.5 dB< 0.5 dB
> 18.0 dB
> 40 dB> 40 dB
> 20 W> 20 W50 Ohm Port1 - Ant
Mechanical & Environmental Specifi cations Dimensions (W x H x D):Connectors:Weight:Sealing:
Egant reserves the right to change this product specifi cation at any time without notice.
118 x 119 x 37 mm7/16 (f)1.7 kgIP67
110 x 115 x 37 mm7/16 (f)1.4 kgIndoor use
Dual Band Combiner80- 960 MHz / 1710 - 2700 MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
8080-- 9
60960
GSM
1800
GSM
1800
UM
TSU
MTS
LTE
LTE
ANTANT
8080-- 9
60960
GSM
1800
GSM
1800
UM
TSU
MTS
LTE
LTE
ANTANT
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev D
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: 80 - 960 MHz- ANT Port 2: 1710 - 2700 MHz - ANT
Input return loss:80 - 960 MHz1710 - 2700 MHz
Isolation between systems:
Intermodulation: IM3, 2x43 dBm:
DC by pass Port 1 - Ant Max input power/port: Port 1: Low band Port 2: High band
Impedance in/out:
Single UnitEG 602 0108 80 - 960 MHz 1710 - 2700 MHz
< 0.3 dB (0,2 dB typical) < 0.5 dB (0,3 dB typical)
> 18.0 dB> 18.0 dB
> 50 dB
<-150 dBc
2A max
< 60 W< 60 W 50 Ohm
Double UnitEG 602 0109 80 - 960 MHz 1710 - 2700 MHz
< 0.3 dB (0,2 dB typical) < 0.5 dB (0,3 dB typical)
> 18.0 dB> 18.0 dB
> 50 dB
<-150 dBc
2A max
< 60 W< 60 W 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
125 x 32 x 110 mm7/16 (f) 1.5 kg
125 x 68 x 110 mm7/16 (f) 3.2 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-35 to +55º CRelative 5 - 100% IP65
-35 to +55º CRelative 5 - 100% IP65
Dual Band Combiner155 - 500 MHz / GPS
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: Low band - ANT Port 2: High band - ANT
Input return loss:155 - 380 MHz380 - 500 MHz
1575 - 1576 MHz
Isolation between systems:Port 1: - Port2Port 2: - Port1 Max input power/port: Port 1: Low band Port 2: High band
Intermodulation: IM3, 2 x 43 dBm: DC by-pass Port 2 - ANT
Impedance in/out:
EG 602 0049
155 - 500 MHz 1575 - 1576 MHz
< 0.2 dB < 0.2 dB
> 16.0 dB> 20.0 dB
> 16.0 dB
> 50 dB> 50 dB
< 300 W< 20 W < -110 dBm (153 dBc)1A, max 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
265 x 55 x 120 mm7/16 (f) 1.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-30 to +70º CRelative 5 - 100% IP65
Dual Band Combiner376 - 500 MHz / 1920 - 2170 MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
TETR
ATE
TRA
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:Port 1: Low bandPort 2: High band
Insertion loss:Port 1: Low band - ANTPort 2: High band - ANT
Input return loss:376 - 500 MHz1920 - 2170 MHz
Isolation between systems:Port 1: - ANTPort 2: - ANT Max input power/port: Port 1: Low band Port 2: High band
Intermodulation: IM3, 2 x 43 dBm: DC by-pass Port 2: UMTS - ANT
Impedance in/out:
EG 602 0045 376 - 500 MHz 1920 - 2170 MHz
< 0.3 dB < 0.3 dB
> 18.0 dB > 18.0 dB
> 30 dB> 50 dB
< 300 W< 500 W <-110 dBm (153 dBc)1A, max 50 Ohm
EG 602 0046 376 - 500 MHz 1920 - 2170 MHz
< 0.3 dB < 0.3 dB
> 18.0 dB> 18.0 dB
> 30 dB> 50 dB
< 300 W< 500 W <-110 dBm (153 dBc)1A, max 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
242 x 31 x 84 mmN (f) 1.5 kg
242 x 31 x 84 mm7/16 (f) 1.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
Dual Band Combiner W-LAN376 - 2500 MHz TETRA, GSM900, GSM1800, UMTS, W-LAN
Add W-LAN to your antenna system
Installing the dual band combiner W-LAN enables you to add W-LAN to your cellular antenna system. After installning the W-LAN combiner and an access point you are up and running with a high speed W-LAN system.
This is a highly important feature when de-signing shared antenna systems wishing to add W-LAN capability to your system.
Save money
The dual band combiner W-LAN offers addi-tional benefits by opening up W-LAN capa-bility to your existing antenna system.
The sleek and easily installed combiner has a broad-banded spectrum with low insertion loss and low intermodulation.
W-LA
NW
-LAN
Access point
Access point
376-2500MHz
376-2170MH
z
W-LA
NW
-LAN
InjectorInjector
W-LA
NW
-LAN
Access point
Access point
376-2500MHz
376-2170MH
z
W-LA
NW
-LAN
InjectorInjector
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for Dual Band Combiner W-LANBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Port 2: Port 3:
Input return loss:68 - 2170 MHz:2400 - 2500 MHz:
Insertion loss:Port 2 - Port 1 (ANT): 68 - 2170 MHz:Port 3 - Port 1 (ANT): 2400 - 2500 MHz:
Isolation: Port 2 - Port 3, Port 3 - Port 2
Max input power/port:
3rd order intermodulation:IM3, 2 x 43 dBm:
Impedance in/out:
EG 100 9018 376 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
EG 100 9028 376 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
EG 602 0007 68 - 2500 MHz 68 - 2170 MHz 2400 - 2500 MHz
> 18 dB> 16 dB
< 1.0 dB (0.5 typ.) < 1.0 dB (0.5 typ.)
> 50 dB
50 W avg. 0.5 kW peak
< - 97 dBm (140 dBc)
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
180 x 28 x 140 mmN (f) 1.6 kg
180 x 32 x 140 mm7/16 (f) 1.9 kg
180 x 32 x 140 mm7/16 (f), 7/16 (m), N (f) 1.9 kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-35 to +70º CRelative 5 - 100% IP65
-35 to +70º CRelative 5 - 100% IP65
-35 to +70º CRelative 5 - 100% IP65
Dual Band CombinerUMTS/LTE376-2170MHz / 2500-2690 MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: Low band - ANT Port 2: High band - ANT
Input return loss:1920- 2170 MHz2500 - 2690 MHz
Isolation between systems:Port 1: - ANTPort 2: - ANT Max input power/port: Port 1: Low band Port 2: High band
Intermodulation: IM3, 2 x 43 dBm:
Impedance in/out:
EG 602 0074 376 - 2170 MHz 2500 - 2690 MHz
< 0.3 dB, typ <0.15 dB< 0.3 dB, typ <0.15 dB
> 18.0 dB> 18.0 dB
> 50 dB> 50 dB
< 400 W< 100 W <-140 dBc
50 Ohm
EG 602 0076 376 - 2170 MHz 2500 - 2690 MHz
< 0.3 dB, typ <0.15 dB< 0.5 dB, typ <0.25 dB
> 17.5 dB> 17.5 dB
> 50 dB> 50 dB
< 60 W< 60 W
<-140 dBc
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
265 x 55 x 120 mm7/16 (f) 1.5 kg
140 x 35 x 138 mmN (f)1.2 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-35 to +60º CRelative 5 - 100% IP67
-35 to +60º CRelative 5 - 100% IP67
Dual Band Combiner 380 - 395 MHz / 410 - 425 MHzTETRA Public SafetyTETRA Public Services
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System1 TETRA Public Services System
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Insertion loss: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Input return loss:Isolation between systems: Max input power/port: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0023 380 - 395 MHz 410 - 425 MHz
< 1.2 dB < 1.2 dB
> 18.0 dB> 50 dB
< 60W< 60W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0024 380 - 395 MHz 410 - 425 MHz
< 1.2 dB < 1.2 dB
> 18.0 dB> 50 dB
< 60W< 60W
50 Ohm
<-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
150 x 150 x 110 mmN (f) 2.5 kg
150 x 150 x 110 mm7/16 (f) 2.5 kg
Environmental Specifications Temp. range (normal operation):Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º C Indoor
-40 to +70º C Indoor
Dual Band Combiner 380 - 395 MHz / 440 - 450 MHzTETRA Public SafetyTETRA Public Services
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System1 TETRA Public Services System
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number: Passband:Port 1: Port 2:
Insertion loss:
Input return loss:Isolation between systems:
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0191
380 - 395 MHz440 - 450 MHz
< 1.4 dB, (Typ 0.8dB)
> 18.0 dB> 50 dB
< 60W
50 Ohm
< -110 dBm (153 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
150 x 150 x 110 mm7/16 (f)2.5 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-20 to +55º CIndoor
Dual Band Combiner 380 - 395 MHz442,975 - 448,975 MHz
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System1 TETRA Public Services System
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevB
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: Port 2: Insertion loss: Port 1: Port 2: TETRA
Input return loss:Isolation between systems: Max input power/port: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0176 380 - 395 MHz 442,975 - 448,975 MHz
< 1.2 dB, (Typ 0.7dB) < 1.2 dB, (Typ 0.7dB)
> 16.0 dB> 40 dB
< 60W< 60W
50 Ohm
< -110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
150 x 150 x 110 mmN (f) 2.5 kg
Environmental Specifications Temp. range (normal operation):Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-5 to +65º C Indoor
Dual Band Combiner 380 - 395 MHz / 450 - 470 MHzTETRA Public SafetyTETRA Public Services
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 TETRA Public Safety System1 TETRA Public Services System
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Insertion loss: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Input return loss:Isolation between systems: Max input power/port: Port 1: TETRA - Public Safety Port 2: TETRA - Public Services
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0094 380 - 395 MHz 450 - 470 MHz
< 1.2 dB, (Typ 0.7dB) < 1.2 dB, (Typ 0.7dB)
> 18.0 dB> 50 dB
< 60W< 60W
50 Ohm
< -110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
150 x 150 x 110 mmN (f) 2.5 kg
Environmental Specifications Temp. range (normal operation):Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º C Indoor
Dual Band Combiner 790 - 862 MHz / 880 - 960 MHz
Combines 2 RBSs into 1 antenna port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 LTE 800 Radio Base Station1 GSM900 Radio Base Station
The combiner combines the 2 signals to the antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: DVB Port 2: GSM900
Insertion loss: Port 1: DVB Port 2: GSM900
Input return loss:Isolation between systems: Max input power/port:Port 1: DVB Port 2: GSM900 Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0097 790 - 862 MHz 880 - 960 MHz
< 0.45 dB, typ 0.2dB< 0.45 dB, typ 0.2dB
> 18.0 dB> 50 dB
200 W200 W50 Ohm
<-110 dBm (153 dBc)
EG 602 0112 790 - 862 MHz 880 - 960 MHz
< 0.45 dB, typ 0.2dB< 0.45 dB, typ 0.2dB
> 18.0 dB> 50 dB
200 W200 W50 Ohm
<-110 dBm (153 dBc)
Mechanical Specifications Dimensions (W x H x D):Connectors:Weight:
200 x 60 x 185 mm7/16 (f) 3.2 kg
200 x 60 x 185 mmN (f) 3.1 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at
any time without notice.
-40 to +70º CRelative 5 - 100% IP65
-40 to +70º CRelative 5 - 100% IP65
Dual Band Combiner 790 - 1000 MHz, 1710 - 2170 MHz
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 800/900 Radio Base Station1 1800/2100 Radio Base Station
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefi ts of antenna sharing.
GSM
900
GSM
900
GSM
1800
GSM
1800
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevB
Technical Specifi cations for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number: Passband:Port 1: 800/900Port 2: 1800/2100
Insertion loss:Port 1: 800/900Port 2: 1800/2100
Input return loss:Isolation between systems:
Max input power/port:Port 1: 800/900Port 2: 1800/2100
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0110
790 - 1000 MHz1710 - 2170 MHz
< 0.3dB, typ 0.15dB < 0.5dB, typ 0.25dB
> 18.0 dB> 50 dB
< 250W< 150W
50 Ohm
< -117 dBm (160 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
117 x 215 x 50 mm7/16 (f)1.5 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-40 to +70º CRelative 5 - 100%IP65
Dual Band Combiner 800 - 1000 MHz, 1700 - 2170 MHz
Combines 2 RBSs into 1 Antenna Port
This Dual Band Combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 GSM800 / GSM900 Radio Base Station1 CDMA / GSM1800 Radio Base Station or1 GSM1900 / UMTS Radio Base Station
The Combiner combines the 2 signals to 1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant Dual Band Combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to to make one antenna installation for each sys-tem. By simply connecting the RBSs into the combiner it will immediately render you all the benefits of antenna sharing.
GSM
900
GSM
900
GSM
1800
GSM
1800
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: GSM800 / GSM900 / CDMA Port 2: GSM1800 / GSM1900 / UMTS
Insertion loss: Port 1: GSM800 / GSM900 / CDMA Port 2: GSM1800 / GSM1900 / UMTS
Input return loss:Isolation between systems: Max input power/port: Port 1: GSM800 / GSM900 / CDMA Port 2: GSM1800 / GSM1900 / UMTS
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 100 9013 800 - 1000 MHz 1700 - 2170 MHz
< 0.15 dB < 0.25 dB
> 21.0 dB> 50 dB
< 250W< 150W
50 Ohm
< -110 dBm (153 dBc)
EG 100 9014 800 - 1000 MHz 1700 - 2170 MHz
< 015 dB < 0.25 dB
> 21.0 dB> 50 dB
< 250W< 150W
50 Ohm
< -110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
117 x 215 x 50 mm7/16 (f) 1.5 kg
117 x 215 x 50 mmN (f) 1.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP65
-40 to +70º CRelative 5 - 100% IP65
Dual Band CombinerGSM900, GSM1800
Combines 2 RBSs into 1 antenna port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station1 GSM1800 Radio Base Station
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing the Egant dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev P1B
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: GSM900 Port 2: GSM1800
Insertion loss: Port 1: GSM900 - ANT Port 2: GSM1800 - ANT
Input return loss:Isolation between systems:Rejection 1920 - 2170 MHz (UMTS): Max input power/port: Port 1: GSM900 Port 2: GSM1800
Impedance in/out:
EG 602 0034 880 - 960 MHz 1710 - 1880 MHz
< 0.2 dB (0.1 dB typ)< 0.4 dB (0.2 dB typ)
> 18.0 dB> 50 dB> 65.0 dB
100 W100 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
195 x 185 x 55 mm7/16 (f) 4 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% IP65
Dual Band Combiner890-960 MHz / 1710-1880, 1920-2170, 2600-2700MHz MHz
Combines 2 RBSs into 1 Antenna Port
This dual band combiner enables the connec-tion of 2 Radio Base Stations to the combiner.
The combiner combines the 2 signals to1 antenna port, or splits the signal to the 2 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our dual band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost inefficient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefits of antenna sharing.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: Port 1: Low band Port 2: High band
Insertion loss: Port 1: Low band - ANT Port 2: High band - ANT
Input return loss: Isolation between systems: Max input power/port: Port 1: Low band Port 2: High band
Intermodulation: IM3, 2 x 43 dBm: DC by-pass Port 2: UMTS - ANT
Impedance in/out:
EG 602 0096 890 - 960 MHz 1710 - 1880 MHz 1920 - 2170 MHz 2600- 2700 MHz
< 0.3 dB, typ 0,15dB < 0.4dB, typ 0,15dB
> 16.0 dB > 50 dB
< 150 W< 150 W < -110 dBm (153 dBc)1A, max 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
265 x 55 x 120 mm7/16 (f) 2.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +60º CRelative 5 - 100% IP66
Triple Band Combiner/Dual Band Combiner UMTS, GSM1800, GSM900 / GSM1800, UMTS
Combines 3 RBSs into 1 antenna port
This triple band combiner enables the connec-tion of 3 Radio Base Stations to the combiner:
1 GSM900 Radio Base Station1 GSM1800 Radio Base Station1 UMTS Radio Base Station
The combiner combines the 3 signals to1 antenna port, or splits the signal to the 3 RBSs in the receiving direction.
This is a highly desirable function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Reduces cost
By utilizing our triple band combiner you will reduce the cost of antennas, feeders and installation.
It eliminates the cost ineffi cient need to make one antenna installation for each system. By simply connecting the RBSs into the com-biner it will immediately render you all the benefi ts of antenna sharing.
Dual Band Combiner - combines 2 RBSs into 1 antenna port
The dual band combiner enables you to connect 2 Radio Base Stations to the combiner:
1 GSM1800 Radio Base Station1 UMTS Radio Base Station
GSM
900
GSM
900
GSM
180
0G
SM 1
800
UM
TSU
MTS
ANTANT
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevF
Technical Specifi cations for the Triple Band Combiner/Dual Band CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Port 1: GSM900Port 2: GSM1800Port 3: UMTS
Insertion loss:Port 1: GSM900 - ANTPort 2: GSM1800 - ANTPort 3: UMTS - ANT
Input return loss:Isolation between systems:
Max input power/port:Port 1: GSM900Port 2: GSM1800Port 3: UMTS
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
DC by-pass between all inputs to output:
EG 100 9012
698 - 960 MHz1710 - 1880 MHz1920 - 2170 MHz
< 0.20 dB < 0.30 dB < 0.45 dB
> 21.0 dB> 50 dB
< 200 W< 200 W< 100 W
50 Ohm
<-110 dBm (153 dBc)
1A, max, per input
EG 100 9009
1710 - 1880 MHz1920 - 2170 MHz
< 0.40 dB < 0.45 dB
> 20.0 dB> 50 dB
< 200 W< 100 W
50 Ohm
<-110 dBm (153dBc)
1A, max, per input
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
230 x 200 x 555 mm7/16 (f)3.6 kg
245 x 210 x 50 mm7/16 (f)3.6 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-40 to +70º CRelative 5 - 100%IP66
-40 to +70º CRelative 5 - 100%IP66
Duplex Filter www.egant.se
Frequency range Description Connector Ordering numberDuplex Filter 380-385, 390-395MHz Duplex Filter Tetra N(f) EG 602 0084380-385, 390-395MHz Duplex Filter Tetra 7/16(f) EG 602 0020380-385, 390-395MHz Duplex Filter Tetra 7/16(f) EG 602 0021415-420, 425-430MHz Duplex Filter Tetra SMA(f) EG 602 0037791-821, 832-862MHz Duplex Filter 800 7/16(f) EG 602 0192876-880, 921-925MHz Duplex GSM-R 7/16(f) EG 602 0148876-880, 921-925MHz Duplex GSM-R N(f) EG 602 0149880-915, 925-960MHz Duplex Filter 900 N(f) EG 602 0079880-915, 925-960MHz Duplex Filter 900 SMA(f) EG 602 0087880-915, 925-960MHz Duplex Filter 900 7/16(f) EG 602 0091890-915, 935-960MHz Duplex Filter 900 7/16(f) EG 602 0090890-915, 935-960MHz Duplex Filter 900 N(f) EG 602 0088890-915, 935-960MHz Duplex Filter 900 SMA(f) EG 602 0089890-915, 935-960MHz Duplex Filter 900 7/16(f) EG 602 00901710-1785, 1805-1880MHz Duplex Filter 1800 N(f) EG 602 00551710-1785, 1805-1880MHz Duplex Filter 1800 7/16(f) EG 602 01931920-1980, 2110-2170MHz Duplex Filter 2100 N(f) EG 602 00561920-1980, 2110-2170MHz Duplex Filter 2100 7/16(f) EG 602 01711920-1980, 2110-2170MHz Duplex Filter 2100 7/16(f) EG 602 01942500-2570, 2620-2690MHz Duplex Filter 2600 N(f) EG 602 01042500-2570, 2620-2690MHz Duplex Filter 2600 7/16(f) EG 602 01952500-2570, 2620-2690MHz Duplex Filter 2600 7/16(f) EG 602 01032500-2570, 2620-2690MHz Duplex Filter 2600 N(f) EG 602 01042500-2570, 2620-2690MHz Duplex Filter 2600 SMA(f) EG 602 01052500-2570, 2620-2690MHz Duplex Filter 2600 N(f) EG 602 0106
Duplexer TETRA380 - 385 MHz390 - 395 MHz
This Duplexer combines/splits the TETRA TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev C
Technical Specifications for TETRA DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
Monitoring port:
EG 602 0084 380 - 385 MHz 390 - 395 MHz
< 1.7 dB
> 18.0 dB> 65 dB
200 W
50 Ohm
< -110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
100 x 150 x 100 mmN (f) 1.4 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-40 to +70º CRelative 5 - 100% Indoor use
Duplexer TETRA380 - 385 MHz390 - 395 MHz415 - 420 MHz425 - 430 MHz
This Duplexer combines/splits the TETRA TX and RX signals to or from one common TX/RX antenna.
Egant Cellular ComponentsBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for TETRA DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
Monitoring port:
EG 602 0020 380 - 385 MHz 390 - 395 MHz
< 1.5 dB
> 20.0 dB> 65 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0021 380 - 385 MHz 390 - 395 MHz
< 0.8 dB
> 20.0 dB> 65 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0037
415 - 420 MHz425 - 430 MHz
< 1.9 dB (1.2 typ)
> 20.0 dB> 75 dB
80 W
50 Ohm
<-110 dBm (153 dBc)
20 dB
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
100 x 150 x 100 mm7/16 (f) 1.4 kg
100 x 250 x 300 mm7/16 (f) 4.2 kg
240 x 240 x 80 mmSMA3 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-40 to +70º CRelative 5 - 100% Indoor use
-40 to +70º CRelative 5 - 100% Indoor use
-10 to +60º CRelative 5 - 100% Indoor use
LTE 800 Duplexer791 - 821MHz 832 - 862MHz
This Duplexer combines/splits the LTE800 TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevA
Technical Specifications for LTE800 DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: (To be configured for customers needs)
Port 1: TXPort 2: RX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
EG 602 0192 791 - 821MHz 832 - 862MHz
< 1.0 dB, typ 0.6dB
> 18.0 dB> 50 dB
100 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
175 x 45 x 155 mm7/16 (f) 1.8 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-20 to +55º CRelative 5 - 100% Indoor use
Duplexer GSM-R876 - 880 MHz921 - 925 MHz
This Duplexer combines/splits the GSM-R TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev B
Technical Specifications for GSM-R DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0148 876 - 880 MHz 921 - 925 MHz
< 0.5 dB, typ 0.3dB
> 18.0 dB> 85 dB
250 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0149 876 - 880 MHz 921 - 925 MHz
< 0.5 dB, typ 0.3dB
> 18.0 dB> 85 dB
250 W
50 Ohm
<-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
160 x 55 x 120 mm7/16 (f) 2.5 kg
160 x 55 x 120 mmN (f) 2.5 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-20 to +55º CRelative 5 - 95% Indoor use
-20 to +55º CRelative 5 - 95% Indoor use
Duplexer EGSM900880 - 915 MHz925 - 960 MHz
This Duplexer combines/splits the EGSM900 TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for EGSM900 DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss: Port 1: RX Port 2: TX
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0079 880 - 915 MHz 925 - 960 MHz
< 0.9 dB, typ 0.5dB< 1.1 dB, typ 0.5dB
> 18.0 dB> 50 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0087 880 - 915 MHz 925 - 960 MHz
< 0.9 dB, typ 0.5dB< 1.1 dB, typ 0.5dB
> 18.0 dB> 50 dB
200 W
50 Ohm <-110 dBm (153 dBc)
EG 602 0091 880 - 915 MHz 925 - 960 MHz
< 0.9 dB, typ 0.5dB< 1.1 dB, typ 0.5dB
> 18.0 dB> 50 dB
200 W
50 Ohm <-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
180 x 60 x 110 mmN (f) 1.5 kg
180 x 60 x 100 mmSMA (f) 1.5 kg
180 x 60 x 130 mm7/16 (f) 1.6 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-30 to +70º CRelative 5 - 100% Indoor use
-30 to +70º CRelative 5 - 100% Indoor use
-30 to +70º CRelative 5 - 100% Indoor use
Duplexer GSM900890 - 915 MHz935 - 960 MHz
This Duplexer combines/splits the GSM900 TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev C
Technical Specifications for GSM900 DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0088 890 - 915 MHz 935 - 960 MHz
< 0.7 dB, typ 0.5dB
> 18.0 dB> 60 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0089 890 - 915 MHz 935 - 960 MHz
< 0.7 dB, typ 0.5dB
> 18.0 dB> 60 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0090 890 - 915 MHz 935 - 960 MHz
< 0.7 dB, typ 0.5dB
> 18.0 dB> 60 dB
200 W
50 Ohm
<-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
180 x 60 x 110 mmN (f) 1.5 kg
180 x 60 x 100 mmSMA (f) 1.5 kg
180 x 60 x 130 mm7/16 (f) 1.6 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-30 to +70º CRelative 5 - 100% Indoor use
-30 to +70º CRelative 5 - 100% Indoor use
-30 to +70º CRelative 5 - 100% Indoor use
Duplexer1710 - 1785MHz, 1805 - 1880MHz1920 - 1980MHz, 2110 - 2170MHz
This Duplexer combines/splits the GSM1800 or UMTS TX and RX signals to or from one com-mon TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for GSM1800, UMTS DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband: (To be configured for customers needs)
Port 1: RXPort 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX: Max input power/port:
Impedance in/out:
EG 602 0055 1710 - 1785MHz 1805 - 1880MHz
< 1.2 dB, typ 0.6dB
> 18.0 dB> 75 dB, typ 90dB
100 W
50 Ohm
EG 602 0056 1920 - 1980MHz2110 - 2170MHz
< 1.2 dB, typ 0.6dB
> 18.0 dB> 75 dB, typ 90dB
100 W
50 Ohm
EG 602 0171 1920 - 1980MHz2110 - 2170MHz
< 1.2 dB, typ 0.6dB
> 18.0 dB> 75 dB, typ 90dB
100 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
145 x 45 x 145 mmN (f) 0.9. kg
145 x 45 x 145 mmN (f) 0.9 kg
145 x 45 x 145 mm7/16 (f) 0.9 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
0 to +70º CRelative 5 - 100% Indoor use
0 to +70º CRelative 5 - 100% Indoor use
0 to +70º CRelative 5 - 100% Indoor use
Duplexer1710 - 1785MHz, 1805 - 1880MHz1920 - 1980MHz, 2110 - 2170MHz2500 - 2570MHz, 2620 - 2690MHz
This Duplexer combines/splits the GSM1800, UMTS or LTE2600 TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for GSM1800, UMTS2100, LTE2600 DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband: (To be confi gured for customers needs)
Port 1: RXPort 2: TX
Insertion loss:
Input return loss:Isolation between TX/RX:
Max input power/port:
Impedance in/out:
EG 602 0193
1710 - 1785MHz1805 - 1880MHz
< 1.0 dB, typ 0.6dB
> 18.0 dB> 50 dB
100 W
50 Ohm
EG 602 0194
1920 - 1980MHz2110 - 2170MHz
< 0.8 dB, typ 0.5dB
> 18.0 dB> 50 dB, typ 60dB
100 W
50 Ohm
EG 602 0195
2500 - 2570MHz2620 - 2690MHz
< 0.7 dB, typ 0.4dB
> 18.0 dB> 60 dB, typ 70dB
100 W
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
175 x 45 x 155 mm7/16 (f)1.8 kg
175 x 40 x 155 mm7/16 (f)1.5 kg
175 x 45 x 155 mm7/16 (f)1.5 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specifi cation at any time without notice.
-20 to +55º CRelative 5 - 100%Indoor use
-20 to +55º CRelative 5 - 100%Indoor use
-20 to +55º CRelative 5 - 100%Indoor use
Duplexer LTE2500-2570MHz2620-2690MHz
This Duplexer combines/splits the LTE TX and RX signals to or from one common TX/RX antenna.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev C
Technical Specifications for LTE DuplexersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband: Port 1: RX Port 2: TX
Insertion loss:
Input return loss:
Isolation between TX/RX:
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0103 2500-2570MHz 2620-2690MHz
< 0.7 dB, typ 0,3dB
> 18.0 dB
> 60 dB, typ 70dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0104 2500-2570MHz 2620-2690MHz
< 0.7 dB, typ 0.3dB
> 18.0 dB
> 60 dB, typ 70dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0105 2500-2570MHz 2620-2690MHz
< 0.9 dB, typ 0.6dB
> 18.0 dB
> 75 dB, typ 85dB
200 W
50 Ohm
<-110 dBm (153 dBc)
EG 602 0106 2500-2570MHz 2620-2690MHz
< 0.9 dB, typ 0.6dB
> 18.0 dB
> 75 dB, typ 85dB
200 W
50 Ohm
<-110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
176 x 38 x 115 mmSMA (f) 1.5 Kg
176 x 38 x 115 mmN (f) 1.5 Kg
200 x 45 x 140 mmSMA (f) 2.8 Kg
200 x 45 x 140 mmN (f) 2.8 Kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-30 to +70º C
Relative 5 - 100% Indoor use
-30 to +70º C
Relative 5 - 100% Indoor use
-30 to +70º C
Relative 5 - 100% Indoor use
-30 to +70º C
Relative 5 - 100% Indoor use
Band Pass Filter www.egant.se
Frequency range Description Connector Ordering numberBand Pass Filters380-395MHz Band Pass Filter Tetra, reject 403-2170 7/16(f) EG 602 0181880-960MHz Band Pass Filter 900, reject 0-850, 990-6000 7/16(f) EG 602 0152880-960MHz Band Pass Filter 900, reject 0-889 7/16(f) EG 602 0142890-960MHz Band Pass Filter 900, reject 0-888 7/16(f) EG 602 0169880-960MHz Band Pass Filter 900, reject 0-888,5 7/16(m)-7/16(f) EG 601 0198890-960MHz Band Pass Filter 900, reject 0-888,5 7/16(m)-7/16(f) EG 601 0199890-960MHz Band Pass Filter 900, reject 1920-2170 7/16(f) EG 602 00311710-1880MHz Band Pass Filter 1800, reject 1920-2170 7/16(f) EG 602 00321920-2170MHz Band Pass Filter 2100, reject< 1900, > 2190 7/16(f) EG 602 01701935-1965, 2125-2155MHz Band Pass Filter 2100, reject 1970-2000 7/16(m)-7/16(f) EG 602 02011950-1965, 2140-2155MHz Band Pass Filter 2100, reject 1970-2000 7/16(m)-7/16(f) EG 602 0200
Band Pass FilterTetra 380 - 395 MHzGSM900 880 - 960 MHzUMTS2100 1920 - 2170 MHz
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevD
Technical Specifi cations for TETRA, GMS900, UMTS2100 Band Pass FilterBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number: Passband:Reject Band:
Insertion loss:
Input return loss:
Attenuation in reject band:Reject Band: 0 -340 MHzReject Band: 403 -1920 MHzReject Band: 1920 - 3GHzReject Band: 0GHz - 850MHzReject Band: 990MHz - 3GHzReject Band: 0GHz - 1850MHzReject Band: 2250 - 3GHzReject Band: 3GHz - 6GHzReject Band: 6GHz - 10GHzReject Band: 10GHz - 18GHz
Max input power/port:
Impedance in/out:
EG 602 0181380 - 395 MHz403 - 2170MHz
< 2.4 dB, typ 1,5dB
> 16.0 dB
> 60 dB> 60 dB> 70 dB
> 70dB> 50dB> 20dB
100 W
50 Ohm
EG 602 0152880 - 960 MHz0 - 850MHz990 - 6000GHz
< 1.8 dB, typ 0,8dB
> 16.0 dB
> 70dB> 70dB
> 70dB> 50dB> 20dB
100 W
50 Ohm
EG 602 01531920 - 2170 MHz0 - 1850MHz2250 - 6000MHz
< 1.8 dB, typ 0,7dB
> 16.0 dB
> 70dB> 70dB> 70dB> 50dB> 20dB
100 W
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
140 x 75 x 75 mm7/16 (f)1.5 kg
175 x 45 x 165 mm7/16 (f)1.8 kg
175 x 45 x 165 mm7/16 (f)1.8kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specifi cation at any time without notice.
-40 to +70º CRelative 5 - 100%Indoor use
-40 to +70º CRelative 5 - 100%Indoor use
-40 to +70º CRelative 5 - 100%Indoor use
Band Pass FilterGSM900 890 - 960 MHzStop band: 0-889MHz
Egant Cellular ComponentsBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50Fax: +46 (0)70 386 53 53E-mail: [email protected]
RevB
Technical Specifi cations for the Band Pass Filter GSM900Below are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Stop bandInsertion loss:890 - 891 MHz891 - 892 MHz892 - 893 MHz893 - 905 MHz905 - 960 MHz
Input return loss:
Attenuation in rejection band:0 - 869 MHz869 - 889 MHz
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0142890 - 960 MHz0 - 889 MHz
< 4 dB < 2.5 dB < 1.0 dB < 0.6 dB < 0.3 dB > 17.5 dB
> 50 dB> 30 dB
400 W
50 Ohm
< -110 dBm
EG 602 0147890 - 960 MHz0 - 889 MHz
< 4 dB < 2.5 dB < 1.0 dB < 0.6 dB < 0.3 dB
> 17.5 dB
> 50 dB> 30 dB
400 W
50 Ohm
< -110 dBm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 72 x 95 mm7/16 (f)2.5 kg
310 x 82 x 105 mm7/16 (f)3.4 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
0 to + 40º CIP50
-20 to + 55º CIP65
Band Pass FilterGSM900 890 - 960 MHzStop band: 0-888MHz
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for the Band Pass Filter GSM900Below are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Stop bandInsertion loss:890 - 892 MHz892 - 893 MHz893 - 905 MHz905 - 960 MHz
Input return loss:
Attenuation in rejection band:0 - 880 MHz880 - 885 MHz885 - 888 MHz
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0169890 - 960 MHz0 - 888 MHz
< 1.5 dB < 0.8 dB < 0.6 dB < 0.3 dB
> 17.5 dB
> 50 dB> 40 dB> 30 dB
400 W
50 Ohm
< -110 dBm, (153 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 72 x 95 mm7/16 (f)2.5 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-35 to + 65º CIP66
Band Pass FilterGSM900 890 - 960 MHzStop band: 0-888.5MHz
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for the Band Pass Filter GSM900Below are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Stop band
Insertion loss:890 - 892 MHz892 - 893 MHz893 - 960 MHz
Input return loss:
Attenuation in rejection band:0 - 888.5 MHz
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0198890 - 960 MHz0 - 888.5 MHz
< 4.0 dB < 2.0 dB < 1.0 dB, typ 0,4 dB > 18 dB, typ 22 dB
> 50 dB
200 W
50 Ohm
< -110 dBm, (153 dBc)
EG 602 0199890 - 960 MHz0 - 888.5 MHz
< 4.0 dB < 2.0 dB < 1.0 dB, typ 0,4 dB > 18 dB, typ 22 dB
> 50 dB
200 W
50 Ohm
< -110 dBm, (153 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 60 x 180 mm7/16 (f) - 7/16(m)2.5 kg
320 x 72 x 200 mm7/16 (f) - 7/16(m)3.0 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
+5 to + 45º CIndoor
-30 to + 65º CIP66
Band Pass FilterGSM900 / GSM1800890 - 960 MHz1710 - 1880 MHz
PRELIMINARY
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Band Pass Filter GSM900 / GSM1800Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:RejectbandInsertion loss:Input return loss:Attenuation in rejection band: Max input power/port: DC BypassImpedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0031890 - 960 MHz 1920 - 2170 MHz< 1 dB (0.5 typ)> 18 dB> 60 dB
100 WYes50 Ohm
< -110 dBm (153 dBc)
EG 602 00321710 - 1880 MHz 1920 - 2170 MHz< 1 dB (0.5 typ)> 18 dB> 60 dB
100 WYes50 Ohm
< -110 dBm (153 dBc)
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
195 x 150 x 70 mm7/16 (f) 1.4 kg
195 x 150 x 70 mm7/16 (f) 1.4 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time
without notice.
-40 to +70º CRelative 5 - 100% Indoor use
-40 to +70º CRelative 5 - 100% Indoor use
Band Pass FilterUMTS 1920 - 2170 MHz
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for the Band Pass Filter UMTS2100Below are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:Stop band
Insertion loss:1920 - 2170 MHz
Input return loss:
Attenuation in rejection band:0 -1900 MHz> 2190 MHz
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 01701920 - 2170 MHz< 1900 MHz> 2190 MHz
< 0.5 dB
> 17.5 dB
> 50 dB> 30 dB
150 W
50 Ohm
< -110 dBm, (153 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
190 x 120 x 50 mm7/16 (f)2.3 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-35 to + 65º CIP66
Dual Band Pass FilterUMTS2100
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 620 06 50E-mail: [email protected]
RevA
Technical Specifi cations for the Band Pass Filter UMTS2100Below are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband RX:Passband TX:
Stop band
Insertion loss:RX:TX:
Input return loss:
Attenuation in rejection band:1970 - 1980 MHz1980 - 2000 MHz
Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 02001950 - 1965 MHz2140 - 2155 MHz
1970 - 2000 MHz
< 1.5 dB < 0.8 dB
> 18 dB
> 40 dB> 50 dB
100 W
50 Ohm
< -110 dBm, (153 dBc)
EG 602 02011935 - 1965 MHz2125 - 2155 MHz
1970 - 2000 MHz
< 1.5 dB < 0.8 dB
> 18 dB
> 40 dB> 50 dB
100 W
50 Ohm
< -110 dBm, (153 dBc)
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
300 x 72 x 95 mm7/16 (f) - 7/16(m)3.5 kg
300 x 72 x 95 mm7/16 (f) - 7/16(m)3.5 kg
Environmental Specifi cationsTemp. range (normal operation):Sealing:
Egant reserves the right to change this product specifi cation at any time
without notice.
-30 to + 65º CIP66
-30 to + 65º CIP66
Phase Adjuster www.egant.se
Frequency range Description Connector Ordering numberPhase Adjuster791-821, 832-862MHz Phase Adjuster LTE800 7/16(f) EG 602 0137890-915, 935-960MHz Phase Adjuster GSM900 7/16(f) EG 100 9032880-915, 925-960MHz Phase Adjuster EGSM 7/16(f) EG 602 01332500-2570, 2620-2690MHz Phase Adjuster LTE2600 7/16(f) EG 602 0138
Phase Adjuster / DuplexerLTE 800
Egant Cellular ComponentsBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev B
Technical Specifications for the Phase Adjuster/DuplexerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:Insertion loss: Port 1 - Ant 1: 791 - 821 MHz Port 2 - Ant 2: 791 - 821 MHz Port 2 - Ant 1: 832 - 862 MHz Port 2 - Ant 2: 832 - 862 MHz
Phase difference: Port 1 - Ant 1: 791 - 821 MHz Port 2 - Ant 2: 791 - 821 MHz Port 2 - Ant 1: 832 - 862 MHz Port 2 - Ant 2: 832 - 862 MHz
EG 602 0137 791 - 821, 832 - 862 MHz < 1.5 dB (0.9 dB typ)< 1.5 dB (0.9 dB typ)< 4.8 dB (4.1 dB typ 3 dB coupling)< 4.8 dB (4.1 dB typ 3 dB coupling)
0° 0°0 + 3° (+ 1° typ)0 + 3° (+ 1° typ)
Input return loss:Isolation between UL - DL:Max input power/port:Impedance in/out:
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
> 18.0 dB> 30 dB2 x 35 W50 Ohm
105 x 240 x 165 mm7/16 (f) 3.7 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100%IP68
Phase Adjuster / DuplexerGSM 900
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the Phase Adjuster/DuplexerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:Insertion loss: Port 1 - Ant 1: 890 - 915 MHz Port 1 - Ant 2: 890 - 915 MHz Port 2 - Ant 1: 935 - 960 MHz Port 2 - Ant 2: 935 - 960 MHz
Phase difference: Port 1 - Ant 1: 890 - 915 MHz Port 1 - Ant 2: 890 - 915 MHz Port 1 - Ant 1: 935 - 960 MHz Port 1 - Ant 2: 935 - 960 MHz Port 2 - Ant 1: 935 - 960 MHz Port 2 - Ant 2: 935 - 960 MHz
EG 100 9032 890 - 915, 935 - 960 MHz < 1.5 dB (0.9 dB typ)< 1.5 dB (0.9 dB typ)< 7.8 dB (7.1 dB typ 6 dB coupling)< 7.8 dB (7.1 dB typ 6 dB coupling)
0°0°- 90 + 3° (+ 1° typ)- 90 + 3° (+ 1° typ)0 + 3° (+ 1° typ)0 + 3° (+ 1° typ)
Input return loss:Isolation between UL - DL:Max input power/port:Impedance in/out:
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
> 18.0 dB> 30 dB2 x 35 W50 Ohm
105 x 240 x 165 mm7/16 (f) 3.7 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100%IP68
Phase Adjuster / DuplexerEGSM 900
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for the Phase Adjuster/DuplexerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:Insertion loss: Port 1 - Ant 1: 880 - 915 MHz Port 2 - Ant 2: 880 - 915 MHz Port 2 - Ant 1: 925 - 960 MHz Port 2 - Ant 2: 925 - 960 MHz
Phase difference: Port 1 - Ant 1: 880 - 915 MHz Port 2 - Ant 2: 880 - 915 MHz Port 2 - Ant 1: 925 - 960 MHz Port 2 - Ant 2: 925 - 960 MHz
EG 602 0133 880 - 915, 925 - 960 MHz < 1.5 dB (0.9 dB typ)< 1.5 dB (0.9 dB typ)< 4.8 dB (4.1 dB typ 3 dB coupling)< 4.8 dB (4.1 dB typ 3 dB coupling)
0° 0°0 + 3° (+ 1° typ)0 + 3° (+ 1° typ)
Input return loss:Isolation between UL - DL:Max input power/port:Impedance in/out:
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
> 18.0 dB> 30 dB2 x 35 W50 Ohm
105 x 240 x 165 mm7/16 (f) 3.7 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100%IP68
Phase Adjuster / DuplexerLTE 2600
Egant Cellular ComponentsBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
Rev B
Technical Specifications for the Phase Adjuster/DuplexerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:Insertion loss: Port 1 - Ant 1: 2500 - 2570 MHz Port 2 - Ant 2: 2500 - 2570 MHz Port 2 - Ant 1: 2620 - 2690 MHz Port 2 - Ant 2: 2620 - 2690 MHz
Phase difference: Port 1 - Ant 1: 2500 - 2570 MHz Port 2 - Ant 2: 2500 - 2570 MHz Port 2 - Ant 1: 2620 - 2690 MHz Port 2 - Ant 2: 2620 - 2690 MHz
EG 602 0138 2500 - 2570, 2620 - 2690 MHz < 1.5 dB (0.9 dB typ)< 1.5 dB (0.9 dB typ)< 4.8 dB (4.1 dB typ 3 dB coupling)< 4.8 dB (4.1 dB typ 3 dB coupling)
0° 0°0 + 3° (+ 1° typ)0 + 3° (+ 1° typ)
Input return loss:Isolation between UL - DL:Max input power/port:Impedance in/out:
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
> 18.0 dB> 30 dB2 x 35 W50 Ohm
105 x 240 x 165 mm7/16 (f) 3.7 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100%IP68
Protection Filter www.egant.se
Frequency range Description Connector Ordering numberProtection Filter876-880MHz, 921-925MHz Reject band 885-915, 930-960 N(f) EG 602 0116885-915MHz, 930-960MHz Reject band 876-880, 921-925 N(f) EG 602 0118876-880MHz, 921-925MHz Reject band 885-915, 930-960 7/16(f) EG 602 0117885-915MHz, 930-960MHz Reject band 876-880, 921-925 7/16(f) EG 602 0119
Protection Filter885-915MHZ + 930-960MHz 876-880MHZ + 921-925MHz
The Protection filters is design to eliminate in-terferance between GSM-R and E-GSM.The filters handles both Uplink and Downlink signals making it very easy to install on an ex-isting system.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for Protection FiltersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:
Passband:
Insertion loss:
Input return loss:
Rejection frequency:
Rejection: Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0116GSM-R 876 - 880 MHz + 921 - 925 MHz
< 1,6 dB, typ 0.7dB
> 18.0 dB
885 - 915MHz + 930 - 960MHz> 50 dB
200 W
50 Ohm
< -110 dBm
EG 602 0117GSM-R 876 - 880 MHz + 921 - 925 MHz
< 1,6 dB, typ 0.7dB
> 18.0 dB
885 - 915MHz + 930 - 960MHz> 50 dB
200 W
50 Ohm
< -110 dBm
EG 602 0118E-GSM 885 - 915 MHz + 930 - 960 MHz
< 1,6 dB, typ 0.7dB
> 18.0 dB
876 - 880MHz +921 - 925MHz> 50 dB
200 W
50 Ohm
< -110 dBm
EG 602 0119E-GSM 885 - 915 MHz + 930 - 960 MHz
< 1,6 dB, typ 0.7dB
> 18.0 dB
876 - 880MHz +921 - 925MHz> 50 dB
200 W
50 Ohm
< -110 dBm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
180 x 65 x 150mN (f) 1.5 kg
180 x 65 x 150m7/16 (f) 1.5 kg
180 x 65 x 150mN (f) 1.5 kg
180 x 65 x 150m7/16 (f) 1.5 kg
Egant reserves the right to change this product specification at any time without notice.
Low Pass Filters www.egant.se
Frequency range Description Connector Ordering numberLow Pass FilterDC-500MHz Reject 790-2700 7/16(f) EG 602 0128DC-500MHz Reject 960-2500 N(m)-N(f) EG 602 0050DC-960MHz Reject 1710-18GHz N(m)-N(f) EG 602 0052
Low Pass FilterDC- 500 MHzReject 790-2700MHz
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for Low Pass FiltersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband:Rejection band:
Insertion loss:
Input return loss376-500MHz:DC-375MHz:
Attenuation/Reject Band Max input power/port:
Impedance in/out:
EG 602 0128 DC - 500 MHz 790 - 2700 MHz
< 0.3dB (0.1dB typ)
> 16.0 dB> 10.0 dB
> 40dB
250 W
50 Ohm
Mechanical SpecificationsDimensions (W x H x D) mm:Connectors:Weight:
375 x 40 x 407/16(f) 1,2 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-40 to +70º CRelative 5 - 100% IP65
Low Pass FilterDC- 500 MHzDC - 960 MHz
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for Low Pass FiltersBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number: Passband:Rejection band:
Insertion loss:
Input return loss376-960MHz:>380MHz
Attenuation/Reject Band Max input power/port:
Impedance in/out:
Intermodulation:IM3, 2 x 43 dBm:
EG 602 0050 DC - 500 MHz 960 - 2500 MHz
< 0.3dB (0.1dB typ)
> 18.0 dB> 10.0 dB
> 70dB
250 W
50 Ohm
< -117 dBm (160 dBc)
EG 602 0052 DC - 960 MHz 1710 MHz - 18 GHz
< 0.3dB (0.1dB typ)
> 18.0 dB> 11.0 dB
> 70dB
250 W
50 Ohm
< -117 dBm (160 dBc)
EG 602 0070 DC - 960 MHz 1710 MHz - 18 GHz
< 0.4dB (0.15dB typ)
> 13.0 dB> 10.0 dB
> 70dB
250 W
75 Ohm
< -117 dBm (160 dBc)
Mechanical SpecificationsDimensions (W x H x D) mm:Connectors:Weight:
127 x 56 x 30 N(m) - N(f) 0.7 kg
127 x 56 x 30N(m) - N(f) 0.6 kg
127 x 56 x 30N(m) - N(f) 0.6 kg
Environmental Specifications Temp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product
specification at any time without notice.
-40 to +70º CRelative 5 - 100% IP65
-49 to +70º CRelative 5 - 100% IP65
-49 to +70º CRelative 5 - 100% IP65
4x4 Combiners www.egant.se
Frequency range Description Connector Ordering number4x4 Combiners376-960MHz 4-Way Combiner N(f) EG 500 8008376-960MHz 4-Way Combiner 7/16(f) EG 603 0014376-2200MHz 4-Way Combiner 7/16(f) EG 603 0008700-2700MHz 4-Way Combiner N(f) EG 603 0080700-2700MHz 4-Way Combiner 7/16(f) EG 603 0081800-960MHz 4-Way Combiner N(f) EG 500 80011710-2200MHz 4-Way Combiner N(f) EG 500 80021710-2700MHz 4-Way Combiner N(f) EG 603 00781710-2700MHz 4-Way Combiner 7/16(f) EG 603 0079
MCM 4-Way Combiner BroadbandTETRA, CDMA2000, GSM900376 - 960 MHz
Combines up to 4 RBSs into the same antenna system
The 4-way combiner enables you to connect 4 Base Stations. The combiner combines the signal and equally splits it between the an-tenna ports.
This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Innovative design
The 4-way combiner incorporates a broad band and low loss product design. The 4-way combiner is designed for low insertion loss and intermodulation.
There is no need for terminations or attenu-ators, which results in very low insertion loss and outstanding intermodulation perfor-mance.
The benefits from installing the 4-way combiner instead of hybrid combiners and splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 4RBS 4RBS 3RBS 3
RBS 2RBS 2RBS 1RBS 1
ANT2ANT2
ANT1ANT1 ANT3ANT3
ANT4ANT4
Egant Cellular ComponentsBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
RevD
Technical Specifications for 4-Way Combiner Broadband (MCM)Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling: Max input power/port:
3rd order intermodulation:IM3, 2 x 43 dBm:Impedance in/out:
EG 500 8008376 - 500 MHz, 880 - 960 MHz
> 25 dB> 18.0 dB6.4 + 0.7 dB100 W
<-110 dBm (153 dBc)50 Ohm
EG 603 0014376 - 500 MHz, 880 - 960 MHz
> 25 dB> 18.0 dB6.4 + 0.7 dB100 W
<-110 dBm (153 dBc)50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
310 x 130 x 130 mmN (f)
380 x 150 x 130 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
4-Way Combiner Broadband376 - 2200 MHz
Combines up to 4 RBSs into the shared antenna system
The 4-way combiner enables the connection of 4 Radio Base Stations. It combines the signal and equally splits it between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Innovative design
The 4-way combiner incorporates a broad band and low loss product design. It is spe-cifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low insertion loss and outstanding inter-modulation performance.
The benefits from installing the 4-way combiner instead of hybrid combiners and splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 4RBS 4RBS 3RBS 3
RBS 2RBS 2RBS 1RBS 1
ANT2ANT2
ANT1ANT1 ANT3ANT3
ANT4ANT4
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for 4-Way Combiner Broadband (MCM)Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:
Input return loss:
Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm:
Impedance in/out:
EG 603 0008376 - 2200 MHz
> 25 dB (30 dB typ)
> 17.0 dB
6.4 + 1.0 dB
100 W
<-110 dBm (153 dBc) 50 Ohm
EG 603 0069376 - 2200 MHz
> 25 dB (30 dB typ)
> 17.0 dB
6.4 + 1.0 dB
100 W
<-110 dBm (153 dBc) 50 Ohm
Mechanical Specifications Dimensions (W x H x D):Connectors:
410 x 130 x 130 mm7/16 (f)
410 x 130 x 130 mmN(f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
Multicasting Matrix MCM 4 x 4700 - 2700 MHz / LTE800,GSM, TDMA, UMTS, LTE2600
Combines up to 4 RBSs into the same antenna system
The advanced MCM enables you to connect 4 Radio Base Stations. The MCM combines the signals and equally splits them between the antenna ports. This is a highly important function when designing shared antenna sys-tems wishing to connect multiple RBSs to the shared antennas.
Sleek design
The MCM incorporates a broad band and low loss product design. The MCM is specifically designed for low insertion loss and low inter-modulation. There is no need for terminations or attenuators, which results in very low in-sertion loss and outstanding intermodulation perfomance.
The benefits from installing the MCM instead of hybrid combiners and splitters are: · Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 4RBS 4RBS 3RBS 3
RBS 2RBS 2RBS 1RBS 1
Floor 1
Floor 2
Floor 3
Floor 4
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the Multicasting Matrix (MCM)Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:
Input return loss:
Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 0080700 - 2700 MHz
> 25 dB, typ >33dB
> 21 dB, typ >25dB
6.4 + 0.7 dB
150 W
< - 110 dBm, 153 dBc 50 Ohm
EG 603 0081700 - 2700 MHz
> 25 dB, typ >33dB
> 21 dB, typ >25dB 6.4 + 0.7 dB
150 W
< - 110 dBm, 153 dBc 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
274 x 35 x 155 mmN (f)2,25 Kg
274 x 35 x 155 mm7/16 (f)2.25 Kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
Multicasting Matrix MCM 4 x 4800 - 960 MHz / GSM, NMT, AMPS1710 - 2200 MHz / GSM, TDMA, UMTS
Combines up to 4 RBSs into the same antenna system
The advanced MCM enables you to connect 4 Radio Base Stations. The MCM combines the signals and equally splits them between the antenna ports. This is a highly important function when designing shared antenna sys-tems wishing to connect multiple RBSs to the shared antennas.
Sleek design
The MCM incorporates a broad band and low loss product design. The MCM is specifically designed for low insertion loss and low inter-modulation. There is no need for terminations or attenuators, which results in very low in-sertion loss and outstanding intermodulation perfomance.
The benefits from installing the MCM instead of hybrid combiners and splitters are: · Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 4RBS 4RBS 3RBS 3
RBS 2RBS 2RBS 1RBS 1
Floor 1
Floor 2
Floor 3
Floor 4
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for the Multicasting Matrix (MCM)Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Insertion loss:Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 500 8001800 - 960 MHz
> 25 dB > 22.0 dB< 0.3 dB6.2 + 0.5 dB100 W
< - 105 dBm, 148 dBc 50 Ohm
EG 500 80021710 - 2200 MHz
> 25 dB > 22.0 dB< 0.3 dB6.2 + 0.5 dB100 W
< - 105 dBm, 148 dBc 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
274 x 35 x 155 mmN (f)2.25 Kg
274 x 35 x 155 mmN (f)2.25 Kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
ANT ANT ANT ANT
IN / OUT IN / OUT IN / OUT IN / OUT
Multicasting Matrix MCM 4 x 41710 - 2700 MHz / GSM, TDMA, UMTS, LTE
Combines up to 4 RBSs into the same antenna system
The advanced MCM enables you to connect 4 Radio Base Stations. The MCM combines the signals and equally splits them between the antenna ports. This is a highly important function when designing shared antenna sys-tems wishing to connect multiple RBSs to the shared antennas.
Sleek design
The MCM incorporates a broad band and low loss product design. The MCM is specifically designed for low insertion loss and low inter-modulation. There is no need for terminations or attenuators, which results in very low in-sertion loss and outstanding intermodulation perfomance.
The benefits from installing the MCM instead of hybrid combiners and splitters are: · Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 4RBS 4RBS 3RBS 3
RBS 2RBS 2RBS 1RBS 1
Floor 1
Floor 2
Floor 3
Floor 4
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevB
Technical Specifications for the Multicasting Matrix (MCM)Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Insertion loss:Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 00781710 - 2700 MHz
> 25 dB, > 22.0 dB< 0.3 dB6.2 + 0.5 dB100 W
< - 105 dBm, 148 dBc 50 Ohm
EG 603 00791710 - 2700 MHz
> 25 dB > 22.0 dB< 0.3 dB6.2 + 0.5 dB100 W
< - 105 dBm, 148 dBc 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
220 x 34 x 115 mmN (f)
220 x 34 x 115 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
3x3 Combiners www.egant.se
Frequency range Description Connector Ordering number3x3 Combiners376-960MHz 3x3 Combiner N(f) EG 603 0091376-960MHz 3x3 Combiner 7/16(f) EG 603 0092700-2700MHz 3x3 Combiner N(f) EG 603 0040700-2700MHz 3x3 Combiner 7/16(f) EG 603 0039
3x3 Combiner 4.8dB376 - 960 MHz
Combines up to 3 RBSs into the same antenna system
The 3x3 combiner enables the connection of 3 Radio Base Stations to the combiner. The com-biner combines the signal and equally splits the signals between the antenna ports.
This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Innovative design
The 3x3 combiner is a broad band and low loss product design. It is intentionally de-signed for low insertion loss and lowintermodulation.
The benefits of using our 3x3 combiner are:· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650E-mail: [email protected]
Technical Specifications for the 3x3 CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Coupling: Input return loss: Isolation between ports: Intermodulation 2 x 43 dBm:
Max input power/port: Max peak power:
Impedance in/out:
EG 603 0091376 - 960 MHz
5.0 +/- 1.0 dB > 20.0 dB> 25 dB (30 dB typ.)< 107 dBm (150 dBc) 60 W 3 kW
50 Ohm
EG 603 0092376 - 960 MHz
5.0 +/- 1.0 dB > 20.0 dB> 25 dB (30 dB typ.)< 107 dBm (150 dBc) 60 W 3 kW
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
175 x 38 x 195 mmN (f)2.0 kg
175 x 38 x 195 mm7/16 (f)2.0 kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-35 to +65º CRelative 5 - 100% IP65
-35 to +65º CRelative 5 - 100% IP65
RevC
3x3 Combiner 4.8dB698 - 2700 MHz
Combines up to 3 RBSs into the same antenna system
The 3x3 combiner enables the connection of 3 Radio Base Stations to the combiner. The com-biner combines the signal and equally splits the signals between the antenna ports.
This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Innovative design
The 3x3 combiner is a broad band and low loss product design. It is intentionally de-signed for low insertion loss and lowintermodulation.
The benefi ts of using our 3x3 combiner are:· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
3dB Combiners www.egant.se
Frequency range Description Connector Ordering number3dB Combiners68-79MHz 3 dB Combiner N(f) EG 603 0001150-2700MHz 3 dB Combiner N(f) EG 603 0074150-2700MHz 3 dB Combiner 7/16(f) EG 603 0076376-960MHz 3 dB Combiner N(f) EG 500 8017376-960MHz 3 dB Combiner 7/16(f) EG 500 8018376-2200MHz 3 dB Combiner N(f) EG 603 0030376-2200MHz 3 dB Combiner 7/16(f) EG 603 0031376-2700MHz 3 dB Combiner N(f) EG 603 0072376-2700MHz 3 dB Combiner 7/16(f) EG 603 0073700-2700MHz 3 dB Combiner N(f) EG 500 8011700-2700MHz 3 dB Combiner 7/16(f) EG 500 8010
Egant ABBox 945SE-114 79 StockholmSwedenPhone: +46 (0)8 62 00 650E-mail: [email protected]
Technical Specifi cations for the 3x3 CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical Specifi cationsProduct number:Passband:
Coupling: (698 - 2200 MHz)Coupling: (2200 - 2700 MHz)
Input return loss:Isolation between ports:Intermodulation 2 x 43 dBm:
Max input power/port:Max peak power:
Impedance in/out:
EG 603 0039698 - 2700 MHz
5.0 +/- 0.8 dB5.3 +/- 1.3 dB
> 20.0 dB> 25 dB (30 dB typ.)< 107 dBm (150 dBc)
150 W3 kW
50 Ohm
EG 603 0040698 - 2700 MHz
5.0 +/- 0.8 dB5.3 +/- 1.3 dB
> 20.0 dB> 23 dB (28 dB typ.)< 107 dBm (150 dBc)
150 W3 kW
50 Ohm
Mechanical Specifi cationsDimensions (W x H x D):Connectors:Weight:
204 x 32 x 140 mm7/16 (f)1.6 kg
204 x 25 x 140 mmN (f)1.4 kg
Environmental Specifi cationsTemp. range (normal operation):Humidity:Sealing:
Egant reserves the right to change this product specifi cation at any time without notice.
-35 to +65º CRelative 5 - 100%IP65
-35 to +65º CRelative 5 - 100%IP65
RevE
3 dB Combiner68 - 79 MHz
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
The benefits from installing the 3 dB combiner instead of power splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
Innovative design
The 3 dB combiner incorporates a broad band and low loss design. It is specifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low inser-tion loss and outstanding intermodulation performance.
EG 699 0006
Bracket for EGANT Cellular Components combiner.
RBS 1RBS 1RBS 2RBS 2
ANT1 ANT2ANT1 ANT2
Egant Cellular ComponentsBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevC
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:
Input return loss:
Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 000168 - 79 MHz
> 30 dB
> 20.0 dB
3.1 + 0.2 dB
120 W
< - 97 dBm, 140 dBc 50 Ohm
Mechanical Specifications Dimensions (W x H x D):Connectors:
190 x 25 x 82 mmN (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
-30 to +70º CRelative 5 - 100% IP65
Installation bracket:Material:
EG 699 0006Aluminum Zinc
Egant reserves the right to change this product specification at any time without notice.
In 1 In 2
Out 1 + 2 Out 1 + 2
3 dB Combiner, Broad Band 150 - 2700 MHz VHF, TETRA, GSM900, GSM1800, UMTS, LTE
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
Innovative design
The 3dB combiner incorporates a broad band and low loss design. It is specifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low inser-tion loss and outstanding intermodulation performance.
The benefits from installing the 3 dB combiner instead of power splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANT1 ANT2ANT1 ANT2
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
Rev C
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:150 - 2700 MHz:
Input return loss:150 - 2500 MHz>2500 - 2700 MHzCoupling:Input 1: 150 - 160 MHz - Ant 1Input 1: 150 - 160 MHz - Ant 2Input 2: 150 - 160 MHz - Ant 1Input 2: 150 - 160 MHz - Ant 2
376 - 2500 MHz>2500 - 2700 MHz Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 0074150 - 2700 MHz
> 24 dB (typ 30 dB)
> 18.0 dB> 16.0 dB, typ 18 dB
1.0 +/- 0.3 dB7.1 +/- 0.3 dB7.1 +/- 0.3 dB1.0 +/- 0.3 dB
3.1 +/- 0.3 dB3.3 +/- 0.4 dB
200 W
< - 150dBc 50 Ohm
EG 603 0076150 - 2700 MHz
> 24 dB (typ 30 dB)
> 18.0 dB> 16.0 dB, typ 18 dB
1.0 +/- 0.3 dB7.1 +/- 0.3 dB7.1 +/- 0.3 dB1.0 +/- 0.3 dB
3.1 +/- 0.3 dB3.3 +/- 0.4 dB
200 W
< - 150dBc 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
215 x 26 x 115 mmN (f)1 Kg
215 x 26 x 115 mm7/16 (f)1 Kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
3 dB Combiner, Broad Band 376 - 960 MHz TETRA, GSM900
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly desirable function when design-ing shared antenna systems wishing to con-nect multiple repeaters or RBSs to the shared antennas.
Innovative design
The 3 dB combiner is designed for low inser-tion loss and low intermodulation.There is no need for terminations or attenua-tors, which results in very low insertion loss and outstanding intermodulation perfomance.
The benefits from installing the 3 dB combiner instead of hybrid combiners and splitters are: · Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANT1 ANT2ANT1 ANT2
EG 699 0006Bracket for EGANT Cellular Componentscombiner.
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:376 - 500MHz876 - 960MHzInput return loss:Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 500 8017376 - 500 MHz, 876 - 960 MHz
> 30 dB (typ 33 dB)> 26 dB (typ 30 dB)> 20.0 dB3.1 +/- 0.4 dB120 W < - 110 dBm (153dBc) 50 Ohm
EG 500 8018376 - 500 MHz, 876 - 960 MHz
> 30 dB (typ 33 dB)> 26 dB (typ 30 dB)> 20.0 dB3.1 +/- 0.4 dB120 W < - 110 dBm (153dBc) 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
190 x 25 x 82 mmN (f)
190 x 42 x 82 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
In 1
In 2
Out 1 + 2
Out 1 + 2
3 dB Combiner, Broad Band 376 - 2200 MHz TETRA, GSM900, GSM1800, UMTS
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
Innovative design
The 3dB combiner incorporates a broad band and low loss design. It is specifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low inser-tion loss and outstanding intermodulation performance.
The benefits from installing the 3 dB combiner instead of power splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANT1 ANT2ANT1 ANT2
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
Rev C
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:376 - 1500 MHz:1500 - 2200 MHz:
Input return loss:376 - 1500 MHz1500 - 2200 MHzCoupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 0030376 - 2200 MHz
> 25 dB (typ 30 dB)> 20 dB (typ 25 dB)
> 20.0 dB> 18.0 dB3.1 + 0.2 dB200 W
< - 97 dBm 50 Ohm
EG 603 0031376 - 2200 MHz
> 25 dB (typ 30 dB)> 20 dB (typ 25 dB)
> 20.0 dB> 18.0 dB3.1 + 0.2 dB200 W
< - 97 dBm 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
215 x 26 x 115 mmN (f)
215 x 26 x 115 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
3 dB Combiner, Broad Band 376 - 2700 MHz TETRA, GSM900, GSM1800, UMTSLTE
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
Innovative design
The 3dB combiner incorporates a broad band and low loss design. It is specifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low inser-tion loss and outstanding intermodulation performance.
The benefits from installing the 3 dB combiner instead of power splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANT1 ANT2ANT1 ANT2
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
Rev B
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:376 - 1500 MHz:1500 - 2700 MHz:
Input return loss:376 - 1500 MHz1500 - 2700 MHzCoupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 603 0072376 - 2700 MHz
> 25 dB (typ 30 dB)> 20 dB (typ 25 dB)
> 20.0 dB> 18.0 dB3.1 +/- 0.3 dB200 W
< - 97 dBm 50 Ohm
EG 603 0073376 - 2700 MHz
> 25 dB (typ 30 dB)> 20 dB (typ 25 dB)
> 20.0 dB> 18.0 dB3.1 +/- 0.3 dB200 W
< - 97 dBm 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
215 x 26 x 115 mmN (f)
215 x 26 x 115 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
3 dB Combiner, Broad Band 700 - 2700 MHz GSM, TDMA, UMTS, W-LAN, LTE
Combines up to 2 repeaters or RBSs into the same antenna system
The 3 dB combiner enables the connection of 2 repeaters or radio base stations. The com-biner combines the signal and equally splits the signals between the antenna ports. This is a highly important function when designing shared antenna systems wishing to connect multiple repeaters or RBSs to the shared antennas.
Innovative design
The 3 dB combiner incorporates a broad band and low loss design. It is specifically designed with low insertion loss and intermodulation in mind. There is no need for terminations or attenuators, which results in very low inser-tion loss and outstanding intermodulation performance.
The benefits from installing the 3 dB combiner instead of power splitters are:
· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
RBS 1RBS 1RBS 2RBS 2
ANT1 ANT2ANT1 ANT2
RBS 1RBS 1RBS 2RBS 2
ANT1 ANT2ANT1 ANT2
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
RevE
Technical Specifications for the 3 dB CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 500 8010700 - 2700 MHz
> 30 dB > 22.0 dB3.1 + 0.3 dB240 W <-110 dBm (153 dBc)50 Ohm
EG 500 8011700 - 2700 MHz
> 30 dB > 22.0 dB3.1 + 0.3 dB240 W <-110 dBm (153 dBc)50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
135 x 45 x 80 mm7/16 (f)
135 x 45 x 80 mmN (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
In 1 In 2
Out 1 + 2 Out 1 + 2
2-Way Combiners www.egant.se
Frequency range Description Connector Ordering number2-Way Combiner88-2700MHz 2-Way Combiner 7/16(f) EG 603 0088376-500MHz 2-Way Combiner 4.7dB 7/16(f) EG 100 9104376-500MHz 2-Way Combiner 6dB 7/16(f) EG 100 9106376-500MHz 2-Way Combiner 10dB 7/16(f) EG 100 9110376-500MHz 2-Way Combiner 4.7dB N(f) EG 100 9304376-500MHz 2-Way Combiner 6dB N(f) EG 100 9306376-500MHz 2-Way Combiner 7dB N(f) EG 100 9307376-500MHz 2-Way Combiner 10dB N(f) EG 100 9310800-2170MHz 2-Way Combiner 4.7dB 7/16(f) EG 100 9004800-2170MHz 2-Way Combiner 6dB 7/16(f) EG 100 9006800-2170MHz 2-Way Combiner 10dB 7/16(f) EG 100 9010800-2170MHz 2-Way Combiner 4.7dB N(f) EG 100 9204800-2170MHz 2-Way Combiner 6dB N(f) EG 100 9206800-2170MHz 2-Way Combiner 7dB N(f) EG 100 9207800-2170MHz 2-Way Combiner 10dB N(f) EG 100 9210800-2170MHz 2-Way Combiner 4.7dB 7/16(m),7/16(f), N(f) EG 603 0011800-2170MHz 2-Way Combiner 6dB 7/16(m),7/16(f), N(f) EG 603 0012
2-Way Combiner88 - 2700 MHz380 - 400 MHz / 1575 - 1576MHz
Combines up to 2 RBSs into the same antenna system
The 2-Way combiner enables the connection of 2 Radio Base Stations to the combiner. The combiner combines the signal and equally splits the signals between the antenna ports.
This is a highly important function when designing shared antenna systems wishing to connect multiple RBSs to the shared antennas.
Innovative design
The 2-Way combiner is a broad band and low loss product design. It is intentionally de-signed for low insertion loss and lowintermodulation.
The benefits of using our 2-Waycombiner are:· Lower insertion loss· Fewer system components· Superior antenna isolation· Greater system quality· Cost effective design improvement
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 62 00 650 E-mail: [email protected]
Technical Specifications for the 2-Way CombinerBelow are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Coupling: Input return loss: Isolation between ports:
Max input power/port: Max peak power:
Impedance in/out:
EG 603 008888 - 2700 MHz
3.0 +/- 0.2 dB > 8.0 dB
3 dB +/- 1.0 dB 200 W 3 kW
50 Ohm
EG 603 0089380 - 400 / 1575 - 1576 MHz
3.0 +/- 0.2 dB > 12.0 dB, typ 16dB
3 dB +/- 1.0 dB 200 W 3 kW
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:Weight:
100 x 40 x 70 mm7/16 (f)0,8 kg
100 x 40 x 70 mm7/16 (f)0,8 kg
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
Egant reserves the right to change this product specification at any time without notice.
-35 to +65º CRelative 5 - 100% IP65
-35 to +65º CRelative 5 - 100% IP65
RevD
2-Way Combiner 376 - 500 MHz800 - 2170 MHzTETRA, GSM900, GSM1800, DCS, UMTS
Combining with optimization
Do you have radio base stations orrepeaters in separate locations? Egant has the solution. Our 2-way combiner enables you to optimize your system by compensating for the added cable loss in addition to combining the signals into one point with equal power, add-ing control over signal strength to the antenna.
Innovative design
This 2-way combiner incorporates a broad band and low loss product design. It is de-signed for low insertion loss and intermodula-tion.
The benefits from installing the 2-way combiner are:
· Higher antenna isolation· Lower insertion loss· Fewer system components· Higher system quality· Cost-effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANTANT
Cable lossCable loss 100%
4.7 dB3 dB, 50%
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevD
Technical Specifications for the 2-Way Combiner Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling in 1 - out:Coupling in 2 - out: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 100 9004800 - 2170 MHz
> 30 dB> 20.0 dB1.8 + 0.3 dB4.7 + 0.3 dB 70 W <-110 dBm (153 dBc)
50 Ohm
EG 100 9006800 - 2170 MHz
> 30 dB> 20.0 dB1.2 + 0.3 dB6.0 + 0.3 dB 70 W <-110 dBm (153 dBc)
50 Ohm
EG 100 9010800 - 2170 MHz
> 30 dB> 20.0 dB1.0 + 0.3 dB10.0 + 0.3 dB 70 W <-110 dBm (153 dBc)
50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
140 x 80 x 40 mm7/16 (f)
140 x 80 x 40 mm7/16 (f)
140 x 80 x 40 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling in 1 - out:Coupling in 2 - out: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 100 9104376 - 500 MHz
> 30 dB> 20.0 dB1.8 + 0.15 dB4.7 + 0.15 dB
70 W
<-110 dBm (153 dBc) 50 Ohm
EG 100 9106376 - 500 MHz
> 30 dB> 20.0 dB1.2 + 0.15 dB6.0 + 0.15 dB
70 W
<-110 dBm (153 dBc) 50 Ohm
EG 100 9110376 - 500 MHz
> 30 dB> 20.0 dB1.0 + 0.15 dB10.0 + 0.15 dB
70 W
<-110 dBm (153 dBc) 50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
140 x 80 x 40 mm7/16 (f)
140 x 80 x 40 mm7/16 (f)
140 x 80 x 40 mm7/16 (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
Installation support Installation bracket: EG 699 0007 (Order separately)
Egant reserves the right to change this product specification at any time without notice.
2-Way Combiner 376 - 500 MHz800 - 2170 MHzTETRA, GSM900, GSM1800, DCS, UMTS
Combining with optimization
Do you have radio base stations orrepeaters in separate locations? Egant has the solution. Our 2-way combiner enables you to optimize your system by compensating for the added cable loss in addition to combining the signals into one point with equal power, add-ing control over signal strength to the antenna.
Innovative design
This 2-way combiner incorporates a broad band and low loss product design. It is de-signed for low insertion loss and intermodula-tion.
The benefits from installing the 2-way combiner are:
· Higher antenna isolation· Lower insertion loss· Fewer system components· Higher system quality· Cost-effective design improvement
RBS 2RBS 2RBS 1RBS 1
ANTANT
Cable lossCable loss 100%
4.7 dB3dB, 50%
Egant ABBox 945SE-114 79 Stockholm SwedenPhone: +46 (0)8 620 06 50 E-mail: [email protected]
RevE
Technical Specifications for the 2-Way Combiner Below are some typical data. For more detailed information, please contact us.
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling in 1 - out:Coupling in 2 - out: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 100 9204800 - 2170 MHz
> 30 dB> 20.0 dB1.8 + 0.3 dB4.7 + 0.3 dB 500 W <-110 dBm (153dBc)50 Ohm
EG 100 9206800 - 2170 MHz
> 30 dB> 20.0 dB1.2 + 0.3 dB6.0 + 0.3 dB 500 W <-110 dBm (153dBc)50 Ohm
EG 100 9207800 - 2170 MHz
> 30 dB> 20.0 dB1.1 + 0.15 dB7.0 + 0.15 dB
500 W
<-110 dBm (153dBc)50 Ohm
EG 100 9210800 - 2170 MHz
> 30 dB> 20.0 dB1.0 + 0.3 dB10.0 + 0.3 dB 500 W <-110 dBm (153dBc)50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
-30 to +70º CRelative 5 - 100% IP68
Electrical SpecificationsProduct number:Passband:
Isolation between ports:Input return loss:Coupling in 1 - out:Coupling in 2 - out: Max input power/port: 3rd order intermodulation:IM3, 2 x 43 dBm: Impedance in/out:
EG 100 9304376 - 500 MHz
> 30 dB> 20.0 dB1.8 + 0.2 dB4.7 + 0.4 dB
500 W
<-110 dBm (153dBc)50 Ohm
EG 100 9306376 - 500 MHz
> 30 dB> 20.0 dB1.2 + 0.2 dB6.0 + 0.4 dB
500 W
<-110 dBm (153dBc)50 Ohm
EG 100 9307376 - 500 MHz
> 30 dB> 20.0 dB1.1 + 0.2 dB7.0 + 0.4 dB
500 W
<-110 dBm (153dBc)50 Ohm
EG 100 9310376 - 500 MHz
> 30 dB> 20.0 dB1.0 + 0.2 dB10.0 + 0.4 dB
500 W
<-110 dBm (153dBc)50 Ohm
Mechanical SpecificationsDimensions (W x H x D):Connectors:
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
140 x 80 x 40 mmN (f)
Environmental Specifications Temp. range (normal operation):Humidity: Sealing:
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
-30 to +70º CRelative 5 - 100% IP65
Installation support Installation bracket: EG 699 0007
Egant reserves the right to change this product
specification at any time without notice.
(Order separately)