high efficiency coalescer separator
TRANSCRIPT
Fluids Services
high eFFiciency cOALeSceR UniTFAcT SheeT
high efficiency coalescer SeparatorThe high efficiency coalescer separator is an ideal produced-water treating technology for application on platforms where power is not available. The Coalescer merges small liquid drops into larger drops by filtering the liquid through several layers of media, each with progressively larger pores. As drops compete for the open pores, they coalesce and form larger drops which are more easily separated.
The skid design consists of two pre-filter vessels, two standard coalescer vessels, two high-efficiency coalescer vessels, and all on-skid piping and controls to operate automatically and safely with only periodic personnel attention.
SPeciFicATiOnS cOALeSceR
L x W x H (ft) 24’ x 8’ 6” x 8’ 6”
Weight (dry) 22,000 lbs
Weight (flooded) 23,000 lbs
Capacity (Bpd) 5,000
Pressure Rating (PSI) 150 PSIG @ 120˚ F
Instrumentation PSV, LG, LC, LSH, LSL, SDV, LCV, PI, PCV
Features Pre-Filter
Power Requirements None
Asme Code Sec VIII Div. 1 and Asme “U” Stamp
tervita.com
AdvantagesNo Power Requirements
Wide Range of Nominal Flow Capabilities
Achieve Less Than 5 PPM Oil and Grease
PRODUcT PRe-FiLTeR VeSSeLS PRe-FiLTeR eLeMenTS
Quantity
Description
Total Of Two (2) On Skid – (1 In Service And 1 As Back-Up)
Eighteen (18) Per Vessel – Total Of Thirty-Six (36) On Skid
Mawp: 150 Psig @ 120 F Pall Nexis T Cartridge – 40” Length
3” - 150# In/Out Melt-Blown Polypropylene Depth Media
Swing Bolt Closure 1-Micron Filtration At 90% Efficiency
Carbon Steel W/ 3 Coat Paint 10 -Micron Filtration At 99.9% Efficiency
Holds (18) 2.5” X 40” 222 Cartridges Soe Cartridge With External 222 Buna O-Rings
Asme “U” Stamp Prefilter Element Part #: Nxt1 – 40U-M3n
PRODUcT PALL PhASeSeP cOALeSceR hOUSing STAnDARD cOALeSceR eLeMenTS
Quantity
Description
Total Of Two (2) On Skid – (1 In Service And 1 As Back-Up)
Four (4) Per Vessel – Total Of Eight (8) On Skid
16” Od X 110” Length (App.) Coalescer Element – 40” Length
Carbon Steel Housing With 30422 Internals Pall Phasesep Coalescer - With Fluoropolymer Media
Top-Mounted Oil-Collection Sump, 12’ Od X 50”L (App.)
Standard Coalescer Element Part #: LCS4h1ah
3” - 150# In/Out
Design Conditions 150 Psig @ 150F
Swing Bolt Closure
Asme Section Viii, Div. 1 And “U” Stamped
Holds Four (4) 40” Length Phasesep Standard Coalescer Elements
Fluids ServicescOALeSceR UniT
canada Operations500, 140–10 Ave. S.E.Calgary, AB T2G 0R1T: (403) 233-7565F: (403) 261-5612
US Operations363 N. sam Houston Parkway, Suite 330Houston, TX 77060T: (832) 399-4500F: (832) 627-7764