hi-5 print matt/vivid
TRANSCRIPT
SPECIFICATIONS
Composition
Applies on
Blade
45°
Up to 60°C, best inside-out
YESbest inside-out VerticalNO Between 18°C
and 26°C
Away from sunligh t and
dust
Pressure
50 gf
Speed
25 cm/sec
Time
5 seconds
Temperature
120°/150°C(248°/302°F)
Pressure
High (>3,5 bar)
Peel
hot
SUGGESTED CUTTING SETTINGS TRANSFER SETTINGS
PU 85 microns Non adhesive polyester
Average Thickness Carrier Certifications
APPLICATION INSTRUCTIONS
Print, Cut and peel off excess materialRemove the print from the carrier with the help of TTD EasyPlace the decoration on the fabricApply following the recommended parametersRemove the TTD while hot
PRODUCT HIGHLIGHTSVery ThinSuitable for technical fabrics (Polyester)Low Application Temperature & Time
NOTE: Given the large number of inks and printers, we highly recommend to perform a test before launching a production
This document can be subject to variations. Updated versions are available on www.siser.com. For further information, please contact our sales office: [email protected]
HI-5 PRINT MATT/VIVID
Product Information Mod.R&S 06 | Rev.5 | Update 02/2021 | Page 1
CARE AND WASHING RECOMMENDATIONS
Washing Ironing Tumble dry Dry cleaning Position Storage Shelf Life
Storage Temperature
Storage Conditions
Wait 24 hours after the application before the first washRespect the textile recommendationsDo not bleach or use aggressive chemical agents
Siser s.r.l. Viale della Tecnica, 18 36100 Vicenza - Italy
Tel. +39 0444.287960 Fax +39 0444.287959 [email protected] www.siser.com
r.e.a. vi 171856reg. imp. vi n° 14971 c.s. € 103.300 i.v. p.iva 01591490246
cotton, polyester, poly/cotton blends, elastan (not suited for treated
and dye sublimated textiles)
YES (synthetic
cycle)Up to 2 years
REACH n° 1907/2006/EU