Personal Info: Name: HESHAM MAGDY ABBAS

Position: Mechanical Project Engineer

Egypt Address: 52 yasser abn aamer street,el ramel.

Birth Location: Alexandria, Egypt.

Birth Date: January 6th 1986.

Nationality: Egyptian.

Religion: Muslim.

Marital Status: Married.

Military Status: Served.

Passport No.: A02527968.

E-mail: eng_h.3bbas@yahoo.com

LinkedIn: https://www.linkedin.com/in/HeshamAbbas

Cell: +2 (010 66740749)

Education:

Alexandria University, Faculty of Engineering - Alexandria, Egypt.

Bachelor of Science in Mechanical Engineering - 2008.

General Graduation Grade: Acceptable (64%). Graduation project:

Title: (Design and Install of Wastewater Treatment Aeration Machine)

Supervisor: Dr. Sadek Kasaab. & Dr.Kamal Radwan.

Grade: Excellent.

Experience:

Site Supervision Senior Mechanical Engineer- Egypt- at KAF Consultant –

(June 2016 – Present):

El LESSAN Hotel "7" Floors included Basement and Swimming Pools (20000 m2 total

area):

Responsible for Mechanical Consulting & Supervision for (HVAC, Firefighting and Plumbing).

Review all the supplied material to the site with the approved material submittal.

Review all the installation works and quality with the approved shop drawing and Codes (SMACNA, ASHRAE, NFPA, UPC, IPC and Egyptian Codes.

Review the invoice with the contractor according to work progress.

Mechanical Project Manager- Saudi Arabia- at BANWA FOR GENERAL

CONTRACTING -BCC – (April 2015 - April 2016):

Two Projects (Technical Collage for Boys) in Abo Areash& Beash (78000 m2 total area

per project):

Responsible for Mechanical Contracting (HVAC, Firefighting and Plumbing) Technical Office& Site works.

HVAC work as design by using HAP program, preparing material submittals and shop drawing for 22 buildings for two projects, package unit system.

-Firefighting work as design by using Elite program and NFA code, preparing material submittals and shop drawing for 22 buildings for two projects, water sprinkler system.

-Plumbing works as design by using UPC, IPC code, preparing material submittals and shop drawing for 22 buildings for two projects, drainage and water system.

-Site work for drainage system.

Mechanical Project Engineer at Watania for Trading and Contracting –

Egypt- (May 2009 – April 2015):

7- High Point Mall Project (firefighting systems) (30000 m2 total area):

Installation of firefighting sprinkler& Hydrant networks for 8 levels and Installation of firefighting pump room.

6 - Chipsy Alex Stores Project (installation of fire alarm& firefighting systems) (15000 m2

total area):

Installation of fire alarm system for three stores and Installation of firefighting networks & fire tanks.

5 - Beyti El Nobaraia Project (installation of HVAC& firefighting systems) (20000 m2 total

area):

Firefighting sprinkler& hydrant system for BO1&BO2&BO3:

Installation of black steel pipes sizes from 8'' to 1'', Pressure test for the systems and Startup and commissioning for the systems.

HVAC system for BO1&BO2&BO3:

Installation of duct, insulation and cladding works, Installation of textile duct, Installation of chilled water AHUs, Installation of motor control center (MCC) and its cable& cable try for this system, Installation of direct digital control (DDC) for this system, Test adjust and balance (TAB) for this system, Startup and commissioning for this system.

4 - Fathalla Mansora Mall Project Mall building (three levels with 9000 m2 total area):

(Installation of HVAC system)

Installation of ducts, insulation and cladding works, Installation of concealed FCU, Startup and commissioning for this system.

3 - ELNG Project (Admin building (2000 m2 total area) (installation of HVAC system):

Installation of 6 tons of galvanized steel ducts, insulation and cladding works, Installation of two DX AHUs, Installation of motor control center (MCC) and its cable& cable try for this system, Installation of direct digital control (DDC) for this system, Test adjust and balance (TAB) for this system, Startup and commissioning for this system.

2- Chipsy Oboor ph-I (PEPSECO) Project HVAC&Firefighting System (80000 m2 total

area):

Installation of HVAC (Chilled water) System:

Installation of absorption chiller, chilled water pumps, cooling tower, condensate pumps, AHUs, FCUs, and all system pipes, valves, ducts, insulation and cladding, Pressure testing, Flushing and all chemicals for chilled water network.

(Installation of sprinkler& hydrant systems):

Row material store, Factory, Factory wall layout and Admin Building, Installation of black steel pipes from 8'' to 1” size, Startup and commissioning for all systems.

1- Mechanical Tech.Office&Planning Engineer:

A- Projects Study:

Study projects BOQs, doing price request and contact to the supplies for best offers.

Preparation of technician& financial offers according to the owner requirements.

Preparation of estimated time plan for projects using MS project& primavera programs.

Practice projects study (Cocka Cola factory – 6 October City -firefighting& HVAC, Nestlé factory – 6 October city- firefighting& HVAC)

B- Follow Site Technician issues:

Preparation of shop drawings & material submittals and coordinate with the consultant for approval.

Discussion of technical problems and coordinate with site engineers and the suppliers to solve it.

Following of purchasing request for material needed from site engineers and prepare the purchasing orders and coordinate with suppliers to send requested material to the site.

C- Planning:

Doing estimated& actual time plan for tender and in hand projects using MS project& primavera programs.

Following update of time plan and coordinate with projects managers for problem solving.

Practice projects time plan (baseline time schedule and updates):

Beyti Factory, Kraft Foods, Chipsy Oboor ph-II (PEPSICO), Milkana Factory, Juhaina Store October City

Juhaina Factory Alex, High Point Mall, Kraft Foods Factory Nigeria and Mars Egypt Factory.

Courses:

Primavera. P6 (40 hours at New Horaizons Center) (Project Manager Professional) PMP- PMBOK V.5 (40 hours at New Horaizons Center)

Skills:

Computer Skills:

Microsoft office, AutoCAD (2D), MS project& Primavera, World Wide Web (Browsing & Searching), HAP (HVAC) and Elite (Firefighting).

Language skills:

Arabic mother tongue and English good command oral, reading and writing.