hepworth applications.pdf

Application

Index

Technical Advisory Service Tel: 0844 856 5165 Fax: 0844 856 5166 E-mail: [email protected] Section 10

The following is a list of the application details in this section. The drawings areavailable as CAD downloads from the Hepworth web site at:www.hepworthdrainage.co.uk – under the Technical dropdown heading click onCAD Downloads for a view of the full set of drawings.

1 - DC1 – Direct connection to internal waste/rainwater pipe page 2

2 - DC2 – Direct connection to soil and vent pipes page 3

3 - DC3 – Telescopic rest bend connection page 4

4 - DCA – External rainwater pipe – connection detail page 5

5 - GC1 – Inlet gully – connection detail page 6

6 - GC2 – Access gully – connection detail page 7

7 - GC3 – Square P gully – connection detail page 8

8 - GC4 – Vertical inlet hopper – trapped connection detail page 9

9 - GC4P – Vertical inlet hopper – trapped connection detail page 10

10 - GC5 – Horizontal inlet hopper – trapped connection detail page 11

11 - GC6 – Paved area gully – connection detail page 12

12 - GC8 – Yard gully – connection detail page 13

13 - GC9 – Road gully – connection detail page 14

14 - AP1 – Rodding point – installation detail page 15

15 - GEN3 – Mini access chamber positioned off main drain run page 16

16 - AP2 – Polypropylene inspection chamber page 17

17 - AP3 – Polypropylene inspection chamber page 17

18 - AP6 – Reduced Access Telescopic PPIC page 18

19 - GEN1 – Mini access chamber – installation detail page 19

20 - GEN2 – Backdrop connection to manhole – application detail page 20

21 - AP5 – Grease trap – installation detail page 21

22 - TD – Threshold drain – installation detail page 22

HepSure® – Application schedule pages 23 to 24

bentons

Typewritten Text

bentons

Typewritten Text

Application

Direct connection to internal waste/rainwater pipe

Section 10 Technical Advisory Service Tel: 0844 856 5165 Fax: 0844 856 5166 E-mail: [email protected]

1 - DC1 SuperSleve and PlastiDrain

SuperSleve

Waste orrainwaterpipe

Alternative detail using internaladaptor retro-fitted in pipe,finished flush with screed(waste pipe only).

Maximum 600mm long“Rocker” pipe

Waste pipeadaptor codes:

• SA4

• SA5

• SA6

• 4A03A

• 4A04A

• 4A05A

• 4P03A

90º bend codes:

• SDB1/1S

Short lengthof pipe cut tosuit

Coupling within 150mmof structure codes:

• SC1/1 • 4P02A

Internal Adaptor to waste codes:

• S/S460

• S/S462

• S460P

• S462P

Rainwater pipe adaptor codes:

• SA7

• SA8

• 4A06A

• 4A07A

PlastiDrain

Application

Direct connection to soil and vent pipes


Soil pipe

Maximum 600mm long“Rocker” pipe

Soil pipe adaptorcodes:

• SA9

Rest bend codes:

• SDBR1


Coupling within 150mm ofstructure codes:

• SC1/1 • 4P07F

• 4P02A

2 – DC2 SuperSleve and PlastiDrain

SuperSleve

PlastiDrain

Application

Telescopic rest bend connection


Soil or waste adaptor

Short length of pipe laid tosteep gradients ensuringacceptable falls aftersettlement has occurred

Suspendedfloor slab

Up to 180mmtelescopic movementwhere heave isexpected insert pipe tohalf socket depth

Possible void Telescopic rest bend code:

• SBRT1

3 – DC3 SuperSleve

SuperSleve

Application

External rainwater pipe – Connection detail


Rainwater pipe

Internal Adaptor to rainwaterpipe codes:

• S/4A06B

• S/4A06C

• 4A06R

• 4A06S


90º bend codes:

• SDB1/1S • 4P03A

4 – DC4 SuperSleve and PlastiDrain

SuperSleve

PlastiDrain

Application

Inlet Gully – Connection detail


Waste or rainwater pipe upto maximum 68mm diameter,inserted through brush strip

Inlet Gully codes:

• SDG3/1 • 4A17A

Remove Dip Tube Trap forfull bore rodding

Concrete bed

5 – GC1 SuperSleve and PlastiDrain

SuperSleve

PlastiDrain

Note:

A cut length of 150mm SuperSleve pipe and a150mm Coupling inserted between the hopperand the base can be used to increase the gullydepth to a maximum of 600mm

For PlastiDrain there is a specific product for this,the code is 4A17E.

Application

Access Gully – Connection detail


Waste or rainwater pipe up tomaximum 110mm diameter or100mm square

Access Gully codes:

• SG3/1

Bent to suit Cement mortar filletConcrete bed

6 – GC2 SuperSleve

SuperSleve

Polypropylene grid provided.

Sealing plate, code IS1

Plain metal grid, codes IG1 (alloy) or IG1C(cast iron)

Hinged metal grid, code IH1 (alloy)

Application

Square P Gully – Connection detail


Waste or rainwater pipe up to maximum 68mm diameteror 65mm square

Square Gully codes:

• SG2/1 • 4A12A

Removable stopperallowing roddingaccess

Concrete bedBend to suit


SuperSleve

PlastiDrain68mm diameterrainwater pipe

32/40mm wastepipe

Double waste pipe

65mm squarerainwater pipe


Standard 150mm metal grid can be used inplace of grid supplied.

Alloy plain, code IG2

Cast iron plain, code IG2C

Alloy hinged, code IH2

Cast iron hinged, code IH2C

Application

Vertical Inlet Hopper – Trapped connection detail



SuperSleve

Waste or rainwater pipe up to maximum110mm diameter or 100mm square


Sealing plate, code IS1

Plain metal grid, codes IG1 (alloy) orIG1C (cast iron)

Hinged metal grid, code IH1 (alloy)

Vertical Inlet Hopper code:

• SH3/1

P-Trap code:

• SDG1/1

Concrete bed

Application

Vertical Inlet Hopper – Trapped connection detail


9 – GC4-P PlastiDrain

PlastiDrain

Waste or rainwater pipe up to maximum90mm diameter or 90mm square

Plastic grid (provided)

Vertical Inlet Hopper code:

• 4H11A

P-Trap code:

• 4T10C

Application

Horizontal Inlet Hopper – Trapped connection detail



SuperSleveWaste or rainwaterpipe

Waste pipe adaptor codes:

32mm SA4

40mm SA5

50mm SA6

RWP adaptor codes:

82mm SA8

110mm SA9

Alternative detail using internaladaptor retro-fitted in pipe, finishedflush with screed (waste pipe only).

Internal Adaptorto waste codes:

32/40mm S/S46050mm S/S462

Short length ofpipe cut to suit

90º bend code:SDB1/1S

Hopper code: SH2

Plain loose grid, 150mm square codes:Alloy IG2Cast iron IG2C

Hinged grid mortared in, 150mm square codes:Alloy IH2Cast iron IH2C

P-Trap code: SDG1/1

Application

Paved Area Gully – Connection detail


Paved area Gully codes:

• SDG2/1 • 4A22A

Bend to suit Remove Dip Tube Trapfor full bore rodding

Concrete bed


SuperSleve

PlastiDrain

Note:

A cut length of 150mm SuperSleve pipe and a 150mmCoupling inserted between the hopper and the base canbe used to increase the gully depth to a maximum of600mm.

For PlastiDrain there is a specific product for this, the codeis 4A17E.

Application

Yard Gully – Connection detail


Yard Gully codes with light duty (1 tonne) grid:

100mm outlet RGP5110mm outlet 4A30A and 4A31A150mm outlet RGP7

Yard Gully codes with medium duty (5 tonnes) grid:

100mm outlet RGP6110mm outlet 4A30A and 4A32A150mm outlet RGP8

Bend to suit Filter/Silt bucket code: • IBP3

• 4A33A

Concrete bed


SuperSleve

Note:

The depth of the gully can be increased by up to 300mmby fitting a 225mm coupling code VC1/3S and a 300mm high raising piece code SIC3/1 or 4A34Abetween the frame and the gully body.

PlastiDrain

Application

Road Gully – Connection detail


Grating to suit wheel load – eg Grade C250, codes IDG1, IDG8

or Grade D400, codes IDG7, IDG9

to BS EN124:1994

Bend to suit Engineering brickwork, depth tosuit specification

Trapped road gully codes:

300 x 600 x 100 RGR1

300 x 600 x 150 RGR2

400 x 750 x 150 RGR3

450 x 900 x 150 RGR4

375 x 750 x 150 MGP2/2

510 x 840 x 150 MGP3/2

Untrapped road gully codes:

375 x 750 x 150 MGP2/1

510 x 840 x 150 MGP3/1

Concrete bed andsurround

13 – GC9 Road Gully

Clay road gully

Polyethylene road gully

Note:

Gully outlet and connection may require concreteprotection where cover is minimal.

Application

Rodding Point – Installation detail


Square rodding point codes:

• SRPS1/1 • 4A10SA

Concrete bed Short length of pipecut to suit

Bend to suit

14 – AP1 SuperSleve and PlastiDrain

SuperSleve

PlastiDrain

Application

Mini Access Chamber positioned off main drain run


Soil pipe adaptor codes:

• SA9

Soil pipe

Short length ofpipe cut to suit

Bend to suitdepth of maindrain (max 45º)

Mini accesschamber code:

• SDAC1/1

Coupling within 150mmof structure codes:

• SC1/1

45º bend codes:

• SDB2/1S

45º junction onmain drain run

15 – GEN3 SuperSleve and PlastiDrainApplication Detail

SuperSleve

PlastiDrain

Rest bend codes:

• SDBR1 • 4P02A

• 4P04A• 4P07F

Application

Polypropylene Inspection Chamber


Square recessed coverand frame filled withmatching material code:

SPCR8

225mm deep concreteplinth to support finish

17 – AP3 SuperSleve and PlastiDrainInstallation Detail

Sited in driveways/hard landscaped areas, with recessed cover

Sited in concrete floor slab

Sited in driveways/hard landscaped areas, with standard round cover

Sited in soft landscaped areas, with standard round cover

Square airtight cover andframe code:

SPKS8


Mini Access Chamber code: SDAC1/1

max 600mm deep

150mm concreteplinth to support finish

Well compactedbedding materialused as backfill

Mini Access Chamber code: SDAC1/1

max 600mm deep

Topsoil

Well compactedbedding materialused as backfill

Application

Reduced Access Telescopic PPIC


225mm deepconcrete collar

Telescopicraising piece


Sited in driveways/hard landscaped areas Maximum depth 3.0m

Topsoil

Telescopicraising piececode SPIC3/7

Raising piece700mm: code SPIC3/4,175mm: code SPIC4

Sealing ringcode SPIC5

Compactedbackfill

Excavationwidth variesdepending ondepth

PPIC

Sited in soft landscaped areas Maximum depth 3.0m

350mm telescopicmovement

4º angulardeflection

Application

Mini Access Chamber & PPIC – Installation detail


Notes:

• Where chambers are positioned on 90º corners always use the main channel by fitting a 45º bend on inlet and outlet

• Bends up to max 45º angle can be used on any inlet

• Heaviest flow should always be directed through main channel

• Short steep connections should preferably be connected via a 45º inlet using a bend where necessary

Inlet adaptor, code SPIC7

100mmcoupling

code: SC1/1

Mainflow

Main flow

Mini access chamber

code: SDAC1/1

19 – GEN1 SuperSleve and PlastiDrain

PPIC – 100mm inlet

940mm deep, code: SPIC1/1

595mm deep, code: SPIC2/1

PPIC 150mm inlet – code: SPIC1/2

Main flow

Mainflow

Mainflow

Mainflow

Mainflow

Main flow

Application

Backdrop connection to manhole – Application detail


Lever locking Stopperattached to manhole wall withchain and staple, code:

• IL1 (100mm)• IL2 (150mm)

Socket adaptor cutto suit, code:

• SA1/1 (100mm)• SA1/2 (150mm)

Pipes cut to suit

Half channel

20 – GEN2 SuperSleve and PlastiDrain

SuperSleve

PlastiDrain

Rest bend codes: • SDBR1 (100mm)• SBR2 (150mm)

Curved square junction codes:

• SDJ2/1D (100mm)• SJ2/3 (150mm)

Note: Backdrops formed in PlastiDrain pipeworkare usually constructed inside the manhole.

Application

Grease Trap – Installation detail


Cover and frameEngineering brickwork to suitdepth of cover required

Filter basket and spatula fitted and inlet 150mm concrete bed and surround

Note:

The grease trap does not form an air trappreventing sewer gases from movingupstream. Appliances connected should beindividually trapped.

SuperSleve

21 – AP5SuperSleve andPlastiDrain

PlastiDrain

Application

Threshold Drain – Installation details


• Removable grid

• Drained to ground (eg in freedraining soils) Threshold drainchannel with end caps fitted withsnap-out section removed

• Connected to drain (eg inexposed location) Threshold drainchannel with end caps fitted

• Outlet adaptor fitted over holemade in channel base

• Drainage adaptor, codes: • SA5• 4A04A

• Drainage bend to suit

22 – TD SuperSleve and PlastiDrain

TD2 – Beam and block floor

TD4 – Suspended timber floor

TD6 – Retro-fit

• Removable grid


• Connected to drain (eg inexposed location) Threshold drainchannel with end caps fitted



• Drainage bend to suit

• Removable grid


• Cement mortar fillet supportingintegral DPM trimmed to suit

• Connected to drain (eg inexposed location) Thresholddrain channel with end caps fitted



S S

S S

S S

P D

P D

P D

Application

HepSure® - Application schedule


MRC4

QSC275

QSC265

160mm PVC-U150mm Ductile Iron150mm Cast Iron (BS416)150mm Cast Iron (BS437)150mm Stainless Steel150mm UltraRib150mm Quantum

100mm (4") Salt Glazed Ware100mm Vitrified Clay100mm SuperSleve100mm Pitch Fibre100mm Asbestos Cement

225mm (9") Salt Glazed Ware225mm Vitrified Clay225mm Concrete (O.D. up to 290mm)250mm Asbestos Cement250mm Ductile Iron

375mm (15") Salt Glazed Ware375mm Vitrified Clay375mm Concrete (O.D. up to 465mm)400mm Asbestos Cement450mm PVC-U

225mm Asbestos Cement225mm Ductile Iron250mm Cast Iron225mm SuperSleve

300mm (12") Salt Glazed Ware300mm Vitrified Clay300mm Concrete (O.D. up to 385mm)300mm SuperSleve

375mm Asbestos Cement400mm Ductile Iron400mm Cast Iron

375mm Concrete (O.D. over 456mm up to 490mm)450mm Ductile Iron450mm Asbestos Cement

225mm Concrete (O.D. over 290mm)

315mm PVC-U

300mm Concrete (O.D. over 405mm)

375mm Concrete (O.D. over 510mm up to 525mm)



110mm PVC-U100mm Ductile Iron100mm Cast Iron (BS416)100mm Cast Iron (BS437)100mm Stainless Steel100mm SuperSleve (see also MRC1)

175mm Pitch Fibre200mm Vitrified Clay200mm Asbestos Cement225mm UltraRib225mm Quantum250mm PVC-U

QSC175

MRC1

MRC3

QSC465

QSC445

QSC490

QSC310

QSC320

QSC425

QSC525

QSC580QSC600

MRC2

QSC120

QSC250

150mm (6") Salt Glazed Ware150mm Vitrified Clay150mm SuperSleve150mm Pitch Fibre150mm Asbestos Cement150mm Concrete180mm UltraRib200mm PVC-U

QSC165

QSC345

MRC6

QSC225

QSC335

QSC410

QSC430

MRC5

160mm PVC-U150mm Cast Iron (SMU/Ensign/SML)150mm Stainless Steel160mm Polyethylene

300mm Asbestos Cement300mm UltraRib300mm Quantum300mm Ductile Iron

450mm (18") Salt Glazed Ware450mm Vitrified Clay450mm Concrete (O.D. up to 560mm)500mm Asbestos Cement

200mm Ductile Iron200mm Cast Iron (BS416)

250mm Ductile Iron250mm Cast Iron225mm SuperSleve

300mm Ductile Iron300mm Cast Iron

300mm Concrete (O.D. over 385mm)400mm PVC-U

400mm Ductile Iron375mm Asbestos Cement

375mm Concrete (O.D. over 490mm up to 510mm)400mm Vitrified Clay

110mm PVC-U100mm Cast Iron (Soil) (SMU/Ensign/SML)100mm Stainless Steel100mm Corrugated Plastic110mm Corrugated Plastic

50mm (2") Polypropylene50mm (2") ABS50mm (2") Cast Iron (Soil)

100mm (4") Salt Glazed Ware100mm Vitrified Clay100mm SuperSleve100mm Pitch Fibre100mm Asbestos Cement

150mm SuperSleve150mm Pitch Fibre150mm Asbestos Cement150mm Twin Walled Plastic (B&H/Uniflex/Aquapipe)150mm Corrugated Plastic (B&H)

QFDC115

QFDC65

QFDC135

QFDC185

QFDC95

QFDC165

QFDC175

QFDC195

QFDC150

82mm (3") PVC-U75mm Cast Iron (Soil & Drain) (SMU)75mm Ductile Iron75mm Grey Iron

160mm PVC-U150mm Cast Iron (SMU/Ensign/SML)150mm Stainless Steel160mm Polyethylene

125mm Cast Iron (Soil)125mm Twin Walled Plastic

100mm SuperSleve100mm Cast Iron (Drain)100mm Ductile Iron100mm Grey Iron100mm Asbestos Cement100mm Pitch Fibre100mm Twin Walled Plastic

QFDC125

150mm SuperSleve150mm (6") Salt Glazed Ware150mm Vitrified Clay150mm Concrete150mm Asbestos Cement150mm Pitch Fibre

160mm PVC-U150mm Ductile Iron150mm Cast Iron (BS416)150mm Cast Iron (BS437)150mm Stainless Steel150mm UltraRib150mm Quantum

Standard Couplings Drain Couplings

For product details see pages 9-12 in Section 9.

A complete HepSure® brochure is available to download from our website,

along with a product selector which enables you to determine the correct

product by simply selecting the two pipes to be connected.

Application

HepSure® - Application schedule


QAC5144

QAC1361

QAC1362

QAC1002

QAC1001

QAC1221

QAC2908

QAC1602

QAC1922

QAC1923

QAC1924

PVC-U 110mmDuctile Iron 100mm

Cast Iron (Soil & Drain) 100mmCast Iron (SMU/Ensign/SML) 100mm

Stainless Steel 100mmSuperSleve 100mm

Asbestos Cement 100mm

100mm Cast Iron (Soil)100mm Cast Iron (SMU/Ensign/SML)100mm Stainless Steel110mm PVC-U

100mm Cast Iron (Soil)100mm Cast Iron (SMU/Ensign/SML)100mm Stainless Steel110mm PVC-U

50mm (2") Polypropylene50mm (2") ABS50mm (2") Cast Iron (Soil)

160mm PVC-U150mm Cast Iron (SMU/Ensign/SML)150mm Stainless Steel

40-50mm PVC-U40-50mm Polypropylene40-50mm ABS

PVC-U 110mmCast Iron (Soil & Drain) 100mm

Cast Iron (SMU/Ensign/SML) 100mmDuctile Iron 100mmSuperSleve 100mm

Salt Glazed Ware (9") 225mmVitrified Clay 225mmDuctile Iron 250mm

Grey Iron 250mmMDPE 280mm

PVC-U 160mmCast Iron (SMU/Ensign/SML) 150mm

Stainless Steel 150mm

Vitrified Clay (S.G.W.) 150mmSuperSleve 150mm

UltraRib 150mmDuctile Iron 150mm

Cast Iron (Drain) 150mmAsbestos Cement 150mm

Pitch Fibre 150mmTwin Walled Plastic 150mm









SuperSleve 100mmVitrified Clay 100mm

Asbestos Cement 100mmCast Iron (SMU/Ensign/SML) 125mm

82mm (3") PVC-U75mm Cast Iron (Soil & Drain)75mm Cast Iron (SMU/Ensign)75mm Ductile Iron70mm Cast Iron (SMU/Ensign/SML)

82mm (3") PVC-U75mm Cast Iron (Soil & Drain)75mm Cast Iron (SMU/Ensign)75mm Ductile Iron70mm Cast Iron (SMU/Ensign/SML)

SuperSleve 100mmVitrified Clay 100mm

Asbestos Cement 100mmCast Iron (SMU/Ensign/SML) 125mm

PVC-U 110mmCast Iron (Soil) 100mm

Cast Iron (SMU/Ensign/SML) 100mmStainless Steel 110mm

PVC-U 110mmCast Iron (Soil) 100mm

Cast Iron (SMU/Ensign/SML) 100mmStainless Steel 110mm

110mm PVC-U100mm Cast Iron (Soil & Drain)100mm Cast Iron (SMU/Ensign/SML)100mm Ductile Iron100mm Stainless Steel100mm SuperSleve

110mm PVC-U100mm Cast Iron (Soil & Drain)100mm Cast Iron (SMU/Ensign/SML)100mm Ductile Iron100mm Stainless Steel100mm SuperSleve

100mm SuperSleve10mm Vitrified Clay100mm Asbestos Cement125mm Cast Iron (SMU/Ensign/SML)

200mm Vitrified Clay225mm Asbestos Cement225mm UltraRib225mm Ductile Iron225mm Cast Iron (Drain)250mm PVC-U250mm MDPE

110mm PVC-U100mm Ductile Iron100mm Cast Iron (Soil & Drain)100mm Cast Iron (SMU/Ensign/SML)100mm Stainless Steel100mm SuperSleve

Salt Glazed Ware (6") 150mmVitrified Clay 150mm

Pitch Fibre 150mmAsbestos Cement 150mm

Concrete 150mmUltraRib 180mmPVC-U 200mm

QAC4000

QAC9001

Salt Glazed Ware (4") 100mmVitrified Clay 100mmSuperSleve 100mmPitch Fibre 100mm

Asbestos Cement 100mm

Salt Glazed Ware (9") 225mmVitrified Clay 225mmSuperSleve 225mmDuctile Iron 250mm

Grey Iron 250mmMDPE 280mm

160mm PVC-U150mm Ductile Iron150mm Cast Iron (Soil & Drain)150mm Cast Iron (SMU/Ensign/SML)150mm Stainless Steel150mm UltraRib

150mm Vitrified Clay150mm Pitch Fibre150mm Asbestos Cement150mm Concrete180mm MDPE180mm UltraRib200mm PVC-U200mm MDPE

QAC6000

Drainage Adaptors Universal Adaptors

For product details see pages 9-12 in Section 9.

A complete HepSure® brochure is available to download from our website,

along with a product selector which enables you to determine the correct

product by simply selecting the two pipes to be connected.

hepworth applications.pdf

Documents