hentzen buys crosslink

1
JULY 2013 3 FOCUS ON POWDER COATINGS photoinitiator causing cleavage and production of radicals that initiate polymerization by their addition to the double bonds in the polymer system. Propagation leads to growth of the polymer, while termination is reached when the radicals are trapped within the fully cured film. The first series of experiments used two model formulations: A is based on a commercial urethane diacrylate solid resin; Tg 56°C with 2% Irgacure 2959 as initiator; and B is based on a commercial polyester di-methacrylate with 2% Irgacure 2959 initiator. A second series employs the A and B systems with additional multi- functional acrylate monomers; M1 – a di-acrylate, M2 – a tri-acrylate, and M3 – a tetra-acrylate at addition levels of 20/80 ratio of acrylate/solid resin. The reactivity of each system was determined with an RT-FTIR equipped with an environmental cell. After five minutes in isothermal mode at selected temperatures between 50 and 110°C the molten samples were irradiated with UV light for 120 seconds. Conversion was measured and plotted against irradiation time. The tests on film properties were comprehensively discussed in this work programme and the conclusions were: the melt temperature is important to achieving good cure and full conversion was best achieved at temperatures up to 110°C; The polyester and urethane (meth)- acrylate resins with different backbones and molecular weights gave different reactivities and film properties, although these differences lessened when multi- functional monomers were added. Films exhibited high resistance to scratch and solvent and the polyester methacrylate based samples were more flexible than the urethane acrylate based samples Article entitled “Wood Coating by UV Powders” by two teams of researchers at French universities. Original Source: Cellulose Chemistry and Technology, Sep/Oct 2012, 46 (7,8), 471-476 © Cellulose Chemistry and Technology 2012 INDUSTRY NEWS Hentzen buys CrossLink CrossLink Powder Coatings has been acquired by USA-based industrial coatings maker Hentzen Coatings. Florida, USA-based CrossLink makes powder coatings for the general industrial and architectural markets. The deal was effective on 28 Feb 2013. Original Source: PPCJ, Polymers, Paint, Colour Journal, Apr 2013, 203 (4583), 5 (Website: http://www.polymerspaintcolourjournal.com/) © Quartz Business Media Ltd 2013 Cytec Coating Resins establishes exciting new identity as Allnex Effective 1 Jun 2013, Cytec Coating Resins is operating as independent company Allnex. The divestiture of the Coating Resins business of Cytec Industries to funds affiliated with Advent International was first announced in Oct 2012 and completed on 3 Apr 2013. The adoption of the new name – Allnex – is the first step towards establishing the company’s new identity. Original Source: Allnex, 2013. Found on PR Newswire, 31 May 2013, (Website: http://www.prnewswire.com). Original Source: PPCJ, Polymers, Paint, Colour Journal, Apr 2013, 203 (4583), 6 (Website: http://www.polymerspaintcolourjournal.com/) © Quartz Business Media Ltd 2013 Asian Paints: Results for 4Q 2012- 2013 Paints major Asian Paints Ltd has posted a net profit-after-tax of Rup 239.56 crores on net sales/income from operations of Rup 2216.90 crores, on a standalone basis, for 4Q ended Mar 2013 (net profit-after-tax of Rup 244.59 crores on net sales/income from operations of Rup 2067.28 crores in 4Q ended Mar 2012). The Board of the company has recommended a final dividend of Rup 36.50/share of Rup 10 taking the total dividend to Rup 46/share for 2012-2013. The financial figures for the company are presented in the included table. (1 crore=10 M, 1 lakh=100,000). Original Source: Business Standard, 10 May 2013, 15 (265), I.14 (Website: http://www.business-standard.com/) © Business Standard Ltd 2013 Akzo Nobel India: Results for 4Q 2012-2013 Akzo Nobel India Ltd has recorded a net profit-after-tax of Rup 625 M on net sales of Rup 5246.7 M for 4Q ended Mar 2013 (net profit-after-tax of Rup 782.4 M on net sales of Rup 9336.3 M in 4Q ended Mar 2012). During 4Q 2012-2013, the company derived revenues of Rup 5178.7 M from its coatings business as against Rup 8973.4 M in 4Q 2011-2012). The Board of the company has recommended a dividend of Rup 20/share and a special dividend of Rup 60/share for 2012-2013. The financial figures for the company are presented in the included table. Original Source: Business Standard, 21 May 2013, 15 (274), I.11 (Website: http://www.business-standard.com/) © Business Standard Ltd 2013 Delta trailers selects PPG commercial coatings group as its paint supplier Delta Manufacturing Inc, a Newport, AR, USA-based maker of steel trailers, announced that it has selected PPG Industries’ commercial coatings group as its paint supplier. Along with providing a complete line of OEM products appropriate for Delta’s trailers, PPG representatives have helped Delta update and reconfigure its workflow and paint booth equipment to enhance productivity and efficiency. PPG’s commercial coatings group offers a full range of coating technologies for the commercial transportation and light industrial markets such as polyurethanes, alkyds, epoxies, polyurea, waterborne, pre-

Upload: vuongthien

Post on 01-Jan-2017

223 views

Category:

Documents


4 download

TRANSCRIPT

Page 1: Hentzen buys CrossLink

JULY 2013 3

F O C U S O N P O W D E R C O A T I N G S

photoinitiator causing cleavageand production of radicals thatinitiate polymerization by theiraddition to the double bonds inthe polymer system. Propagationleads to growth of the polymer,while termination is reached whenthe radicals are trapped within thefully cured film.

The first series of experimentsused two model formulations: A isbased on a commercial urethanediacrylate solid resin; Tg 56°C with2% Irgacure 2959 as initiator; andB is based on a commercialpolyester di-methacrylate with 2%Irgacure 2959 initiator. A secondseries employs the A and Bsystems with additional multi-functional acrylate monomers; M1– a di-acrylate, M2 – a tri-acrylate,and M3 – a tetra-acrylate ataddition levels of 20/80 ratio ofacrylate/solid resin. The reactivityof each system was determinedwith an RT-FTIR equipped with anenvironmental cell. After fiveminutes in isothermal mode atselected temperatures between 50and 110°C the molten sampleswere irradiated with UV light for120 seconds. Conversion wasmeasured and plotted againstirradiation time.

The tests on film propertieswere comprehensively discussedin this work programme and theconclusions were: the melttemperature is important toachieving good cure and fullconversion was best achieved attemperatures up to 110°C; Thepolyester and urethane (meth)-acrylate resins with differentbackbones and molecular weightsgave different reactivities and filmproperties, although thesedifferences lessened when multi-functional monomers were added.Films exhibited high resistance toscratch and solvent and thepolyester methacrylate basedsamples were more flexible thanthe urethane acrylate basedsamples

Article entitled “Wood Coating by UVPowders” by two teams of researchers atFrench universities. Original Source: CelluloseChemistry and Technology, Sep/Oct 2012, 46(7,8), 471-476 © Cellulose Chemistry andTechnology 2012

INDUSTRYNEWS

Hentzen buys CrossLink

CrossLink Powder Coatings hasbeen acquired by USA-basedindustrial coatings maker HentzenCoatings. Florida, USA-basedCrossLink makes powder coatingsfor the general industrial andarchitectural markets. The dealwas effective on 28 Feb 2013.

Original Source: PPCJ, Polymers, Paint,Colour Journal, Apr 2013, 203 (4583), 5(Website:http://www.polymerspaintcolourjournal.com/)© Quartz Business Media Ltd 2013

Cytec Coating Resins establishesexciting new identity as Allnex

Effective 1 Jun 2013, CytecCoating Resins is operating asindependent company Allnex. Thedivestiture of the Coating Resinsbusiness of Cytec Industries tofunds affiliated with AdventInternational was first announcedin Oct 2012 and completed on 3Apr 2013. The adoption of thenew name – Allnex – is the firststep towards establishing thecompany’s new identity.

Original Source: Allnex, 2013. Found on PRNewswire, 31 May 2013, (Website:http://www.prnewswire.com). Original Source:PPCJ, Polymers, Paint, Colour Journal, Apr2013, 203 (4583), 6 (Website:http://www.polymerspaintcolourjournal.com/)© Quartz Business Media Ltd 2013

Asian Paints: Results for 4Q 2012-2013

Paints major Asian Paints Ltd hasposted a net profit-after-tax ofRup 239.56 crores on netsales/income from operations ofRup 2216.90 crores, on astandalone basis, for 4Q endedMar 2013 (net profit-after-tax ofRup 244.59 crores on netsales/income from operations ofRup 2067.28 crores in 4Q endedMar 2012). The Board of thecompany has recommended afinal dividend of Rup 36.50/share

of Rup 10 taking the totaldividend to Rup 46/share for2012-2013. The financial figuresfor the company are presented inthe included table. (1 crore=10 M, 1 lakh=100,000).

Original Source: Business Standard, 10 May2013, 15 (265), I.14 (Website:http://www.business-standard.com/) © Business Standard Ltd 2013

Akzo Nobel India: Results for 4Q2012-2013

Akzo Nobel India Ltd hasrecorded a net profit-after-tax ofRup 625 M on net sales of Rup5246.7 M for 4Q ended Mar 2013(net profit-after-tax of Rup 782.4M on net sales of Rup 9336.3 Min 4Q ended Mar 2012). During4Q 2012-2013, the companyderived revenues of Rup 5178.7M from its coatings business asagainst Rup 8973.4 M in 4Q2011-2012). The Board of thecompany has recommended adividend of Rup 20/share and aspecial dividend of Rup 60/sharefor 2012-2013. The financialfigures for the company arepresented in the included table.

Original Source: Business Standard, 21 May2013, 15 (274), I.11 (Website:http://www.business-standard.com/) © Business Standard Ltd 2013

Delta trailers selects PPGcommercial coatings group as itspaint supplier

Delta Manufacturing Inc, aNewport, AR, USA-based makerof steel trailers, announced that ithas selected PPG Industries’commercial coatings group as itspaint supplier. Along with providinga complete line of OEM productsappropriate for Delta’s trailers,PPG representatives have helpedDelta update and reconfigure itsworkflow and paint boothequipment to enhance productivityand efficiency. PPG’s commercialcoatings group offers a full rangeof coating technologies for thecommercial transportation andlight industrial markets such aspolyurethanes, alkyds, epoxies,polyurea, waterborne, pre-