henry hnth30 - waterworks · 1/16/2019  · 800.927.2120 opt 2 | waterworks.com page 1 of2 updated...

2
HNTH30 HENRY Henry Metal Lever Handle Thermostatic with Metal Cross Handle Shutoffs Trim PRODUCT SUPPORT 800.927.2120 OPT 2 | WATERWORKS.COM PAGE 1 OF 2 01.16.19 UPDATED ON SHOWN IN HENRY METAL LEVER HANDLE THERMOSTATIC WITH METAL CROSS HANDLE SHUTOFFS TRIM| HNTH30 INSPIRATION PRODUCT FEATURES Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian and classic settings. CODES & STANDARDS TECHNICAL DETAILS Code # HNSV30X: Complies with ASME A112.18.1/CSA B125.1 & ANSI A117.1 ADA. Certified with IAPMO, cUPC & State of MA The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing. Brass material is used for components A new unique rough was engineered to house this layout which was based on our TM5 platform. ADA Compliance: Yes Control Valve Rough-in Depth Maximum: 4 1/8" Control Valve Rough-in Depth Minimum: 2 1/8" Diverter Valve Rough-in Depth Maximum: 4 1/8" Diverter Valve Rough-in Depth Minimum: 2 7/8" Escutcheon Primary Material: Brass Fittings Hole Diameter: 5 1/4" Depth / Width: 3 15/16" Height: 16 1/8" Integrated Diverter: N Integrated Spray: N Length: 8 11/16" Number of Handles: Three Pivot: N Primary Material: Brass Spout Swivel: N Spray Included in Unit: N Suggested Application: Bath Water Pressure Maximum: 85.0 psi Water Pressure Minimum: 20.0 psi Water Pressure Recommended: 45.0 psi

Upload: others

Post on 03-Oct-2020

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: HENRY HNTH30 - Waterworks · 1/16/2019  · 800.927.2120 OPT 2 | WATERWORKS.COM PAGE 1 OF2 UPDATED ON 01.16.19 SHOWN IN HENRY METAL LEVER HANDLE THERMOSTATIC WITH METAL CROSS HANDLE

HNTH30HENRYHenry Metal Lever Handle Thermostatic with Metal Cross Handle Shutoffs Trim

PRODUCT SUPPORT800.927.2120 OPT 2 | WATERWORKS.COM

PAGE 1 OF 201.16.19UPDATED ON

SHOWN IN HENRY METAL LEVER HANDLE THERMOSTATIC WITH METAL CROSS HANDLE SHUTOFFS TRIM| HNTH30

INSPIRATION

PRODUCT FEATURES

Influenced by the connection of industry and art Henry easily transitions between modern, traditional, utilitarian

and classic settings.

CODES & STANDARDS

TECHNICAL DETAILS

Code # HNSV30X: Complies with ASME A112.18.1/CSA B125.1 & ANSI

A117.1 ADA. Certified with IAPMO, cUPC & State of MA

The manufacturing process encompasses casting, turning, forging, hand-fitting and hand polishing.

Brass material is used for components

A new unique rough was engineered to house this layout which was based on our TM5 platform.

ADA Compliance: YesControl Valve Rough-in Depth Maximum: 4 1/8"Control Valve Rough-in Depth Minimum: 2 1/8"Diverter Valve Rough-in Depth Maximum: 4 1/8"Diverter Valve Rough-in Depth Minimum: 2 7/8"Escutcheon Primary Material: BrassFittings Hole Diameter: 5 1/4"Depth / Width: 3 15/16"Height: 16 1/8"Integrated Diverter: NIntegrated Spray: NLength: 8 11/16"Number of Handles: ThreePivot: NPrimary Material: BrassSpout Swivel: NSpray Included in Unit: NSuggested Application: BathWater Pressure Maximum: 85.0 psiWater Pressure Minimum: 20.0 psiWater Pressure Recommended: 45.0 psi

Page 2: HENRY HNTH30 - Waterworks · 1/16/2019  · 800.927.2120 OPT 2 | WATERWORKS.COM PAGE 1 OF2 UPDATED ON 01.16.19 SHOWN IN HENRY METAL LEVER HANDLE THERMOSTATIC WITH METAL CROSS HANDLE

HNTH30HENRYHenry Metal Lever Handle Thermostatic with Metal Cross Handle Shutoffs Trim

PRODUCT SUPPORT800.927.2120 OPT 2 | WATERWORKS.COM

PAGE 2 OF 201.16.19UPDATED ON