hempel ral no

MOST FREQUENTLY USED PAINTS

This overview presents only selected paints designated for anticorrosion protection in the Protective segment. They are produced in most of Hempel’s plants and are widely available. Paints for other purposes, products unique to the assortment of individual production plants, and custom coatings are not included here. To obtain detailed information, specifications and pricing for a particular project, please contact your local Hempel representative or the nearest Hempel office shown on the back cover of this publication.

PROTECTING CUSTOMERS’ INVESTMENTS

Founded in 1915 as a supplier of paints for the marine segment and heavy industry, Hempel is today a leading global company in industrial coatings. We produce and sell paints to the Marine, Protective, Container, Yacht and Decorative segments. Our coatings protect customers’ investments from the corrosive forces of nature to extend their lifetimes, reduce maintenance costs, and make them more attractive.

Hempel offers high-quality anticorrosive paints intended mainly for the surface protection of steel structures in infrastructure, petrochemical plants, cranes, wind turbines, bridges, railway carriages,

chemical plants and other segments. Hempel puts emphasis on the development and delivery of economical and environmentally friendly solutions to help customers meet environmental standards while controlling costs. We also offer customised solutions based on extensive research and broad international experience.

In addition to classic solvent-based paints (typically with high volume solids), the product assortment includes water-based paints and specialised paints for specific conditions. Hempel offers paints based on: silicone resins, alkyds, vinyls, acrylates, epoxy-esters, epoxides, epoxy tars, polyurethanes, zinc silicates, and silicones.

Numerous testing and research institutions have given their approval to Hempel’s paints. The products are certified for various operating conditions and meet today’s regulatory requirements.

A GUIDE TO MOST FREQUENTLY USED PAINTS

Issued: April 2010

Alkyds

Product Description Recommended use Finish Colours/shade nos.

Volume solids, %

Film thickness (DFT)

Theoretical spreading rate

V.O.C Surface preparation

Thinner

HEMPALIN PRIMER 12050

HEMPALIN PRIMER 12050 is a relatively quick-drying, zinc phosphate primer, based on long oil alkyd and urethane alkyd.

General purpose primer for HEMPALIN systems for protection of steel in mild to medium atmos-pheric corrosive environments.

Flat Green/40760 -Red/50410

49 ± 1 40 micron 12.3 m²/litre 415 g/litre min. Sa 2 08230

HEMPAQUICK PRIMER 13624

HEMPAQUICK PRIMER 13624 is a very quick-drying zinc phos-phate pigmented alkyd primer.

As a rust preventing primer on steel, machinery parts, etc. where quick drying is needed, both as a workshop primer for temporary protection and as a general purpo-se primer in fast drying alkyd-ba-sed systems for protection of steel in mild to medium atmospheric corrosive environments.

Flat Light grey/12170 - Red/50710

47 ± 1 80 micron 5.9 m2/litre 480 g/litre min. Sa 2 08080

HEMPEL'S SILVIUM 51570

HEMPEL'S SILVIUM 51570 is an oleoresinous general purpose aluminium paint with good light reflection.

As a finishing coat on steel and woodwork exterior and interior in a mild to moderately corrosive environment where an aluminium surface or light reflection is desired, and/or for moderately hot surfaces.

Glossy Aluminium/19000

38 ± 1 25 micron 15.2 m²/litre 505 g/litre Sa 2/ St 3 Do not dilute.

HEMPALIN ENAMEL 52140

HEMPALIN ENAMEL 52140 is a glossy alkyd enamel which forms a weather resistant coa-ting. It is flexible and resistant to salt water and spillage of mineral oil and other aliphatic hydrocarbons.

As a general purpose finishing coat in alkyd systems on exterior and interior steel and woodwork in a mildly to moderately corrosive environment. As a finishing coat in engine rooms including tank tops, main engines and auxiliary machinery.

Glossy White/10000* Black/19990*

46 ± 1 30 micron 15.3 m²/litre14.3 m²/litre

430 g/litre 455 g/litre

Application for clean and dry surface.

08230

HEMPALIN DECKPAINT 53370

HEMPALIN DECKPAINT 5337 NON-SKID is a styrenated alkyd paint containing an antislip aggregate. It is quick drying, hard-wearing and resistant to sunlight, salt water and oil splashes, but not to aromatic hydrocarbons.

As a skid-proof finishing coat on steel decks, stairways, foot-bridges, indoors and outdoors, in a mildly to moderately corrosive marine environment.

Flat Green/40640* Red/50630*

43 ± 1 30 micron 14.3 m²/litre 476 g/litre 479 g/litre

??????Application for clean and dry surface.

08080

HEMPAQUICK ENAMEL 53840

HEMPAQUICK ENAMEL 53840 is a quick drying alkyd enamel with good gloss and colour retention

As a topcoat on steel in a mild to moderately corrosive environ-ment. In case of line application of small items to be packed together, HEMPALIN ENAMEL 52140 or HEMPALIN DECK PAINT 53240 is recommended.

Glossy White/10000*

40 ± 1 10.0 m²/litre 545 g/litre Application for clean and dry surface.

08080

Acrylics

Product Description Recommended use FinishColours/shade nos.

Volume solids, %




Thinner

HEMPATEX HI-BUILD 46410

HEMPATEX HI-BUILD 46410 is physically drying high build paint with good colour retention as a flat finish. Based on acrylic resin and non-chlorinated plasti-ciser. Contains zinc phosphate. Resistant to salt water, splashes of aliphatic hydrocarbons, animal and vegetable oils.

1. As a primer, intermediate or finishing coat in HEMPATEX-systems in a moderately corrosive environment.2. As a selfprimed repair and touch-up coating for containers as well as other cases where a fast and economic repair job is desired.3. As a finishing coat for containers.

Flat Grey/11480* Red/50630*

42 ± 1 100 micron 4.2 m2/litre 515 g/litre Sa 2½ 08080

HEMPEL'S PRO ARCYLIC 55880

HEMPEL'S PRO ACRYLIC 55880 is a two-component, isocyanate-free, acrylic finishing coat with good gloss and colour retention. It is resistant to water and spil-lage of aliphatic hydrocarbons. Minimum curing temperature is 0°C/32°F.

As a finishing coat for protection of structural steel in a severely corrosive environment, where light-fastness and gloss retention are required.

Glossy White/10000*

60 ± 1 50 micron 12.0 m²/litre 380 g/litre Application for clean and dry surface.

08450

Issued: April 2010

Acrylics


Volume solids, %




Thinner

HEMPATEX ENAMEL 56360

HEMPATEX ENAMEL 56360 is a finishing coat based on acrylic resin and nonchlorinated plasti-ciser for optimum gloss and co-lour retention. Physically drying.Resistant to salt water, splashes of aliphatic hydrocarbons and animal and vegetable oils.

As an interior and exterior finishing coat in HEMPATEX systems in a moderately to severely corrosive environment.

Semi-gloss Black/19990* Orange/50040*

31 ± 1 33 ± 1

35 micron 8.9 m²/litre 9.4 m²/litre


Application for clean and dry surface.

08080

HEMUCRYL PRIMER HI-BUILD 18032

HEMUCRYL PRIMER HI-BUILD 18032 is a water-borne, acrylic dispersion paint with good anticorrosive properties. Especially suited for application by airless spray.

As a primer in water-borne paint systems on interior and exterior steelwork in a mildly to mode-rately corrosive environment.May also be used as a primer in water-borne paint systems on hot dip galvanised steel, aluminium, and stainless steel in a mildly corrosive environment.

Flat Grey/12170 - Red/50710

43 ± 1 75 micron 5.7 m²/litre 45 g/litre Sa 2½ Fresh water

HEMUCRYL ENAMEL HI-BUILD 58030

HEMUCRYL ENAMEL HI-BUILD 58030 is a water-borne, acrylic dispersion based paint. It dries to a non-yellowing and glossy coating with low dirt pick-up, good weathering properties, and high gloss retention. Especially suited for application by airless spray.

As a glossy, finishing coat in water-borne paint systems, interior and exterior, in moderately to severely corrosive environments. For use on buildings; the relatively highresistance to diffusion of water vapour and carbon dioxide should be taken into account.For handrails and the similar, a chemically curing coating is recommended as an alternative.

Glossy White/10000*


Fresh water

Epoxy


Volume solids, %




Thinner

HEMPADUR UNIQ 4774A

HEMPADUR UNIQ 4774A is a self-priming, two-component, high-build, pure epoxy paint, po-lyamide/amine cured. Abrasion and corrosion resistant.

As a universal primer or self primed high performance coating system for wind turbine towers and wind turbine components.

Semi-gloss Cream/20450 - Grey/11150

76 ± 1 150 micron 5.1 m²/litre 240 g/litre Sa 2½, St 3 08450

HEMPADUR 1555E HEMPADUR 1555E is a two-component polyamide adduct-cured epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F. Approved to UK Highways Agency item 110 & Network Rail items 7.1.5. &7.1.7.

As a general purpose primer for HEMPATEX, HEMPADUR and HEMPATHANE systems onsteel. May also be used as primer for hot dipped galvanised surfaces, aluminium and stainless steel.

Flat Light Beige/22430

40 ± 1 40 micron 10.0 m²/litre 530 g/litre Sa 2½ 08450

HEMPADUR 15130 HEMPADUR 15130 is a two-component, polyamide cured coal tar epoxy which provides a very hardwearing coating, highly resistant to seawater and mineral oils. Limited resi-stance to a number of solvents. Aliphatic hydrocarbons may be discoloured.

As a self-priming coating system for long-term protection of steel and concrete in a severely corrosi-ve environment. It provides excel-lent protection as a lining in crude and fuel oil tanks. If the exposure is acidic or a temperature gradient is developed, it is recommended to use HEMPADUR 15100. For application at lower tempera-tures, i.e. in the interval from -10°C/14°F to +10°C/50°F, it is recommended to use HEMPADUR LTC 15030.

Semi-gloss Black/19990 Brown/60430

70 ± 1 125 micron 5.6 m²/litre 295 g/litre 300 g/litre

Sa 2½ 08450

HEMPEL'S SHOPPRIMER E 15280

HEMPEL’S SHOPPRIMER E 15280 is a two-component epoxy polyamide primer, pigmented with zincphosphate rust-inhibiting pigments. It is designed for automatic spray application as well as manual application.

As a shopprimer for protection of blast cleaned steel plate and other structural steel during the storage and building period.

Flat Red/50890

22 ± 1 20-25 micron 10.5 m²/litre 640 g/litre Sa 2½ 08570

HEMPADUR PRIMER 15300

HEMPADUR PRIMER 15300 is a two-component polyamide-cured epoxy primer containing zinc phosphate as corrosion inhibiting pigment. It cures to a strong and rust-preventing coating.

As a primer or intermediate coat in container systems. May be used as a general purpose epoxy primer according to painting specification.

Flat Red/50890 - Grey/12170


Issued: April 2010

Epoxy


Volume solids, %




Thinner

HEMPADUR 15553 HEMPADUR 15553 is a two-component polyamide adduct-cured epoxy paint. It cures to a flexible, well adhering coating with good abrasion and impact resistance. Contains zinc phosphate. Cures down to -10°C/14°F.

As a primer for HEMPATEX, HEMPADUR and HEMPATHANE systems on hot dipped galvanised surfaces, aluminium and stainless steel in moderately corrosive en-vironments. HEMPADUR 15553 is also suited when roughening of the surface is not possible. Please see surface preparation overleaf.

Flat Off-white/11630


8450

HEMPADUR FAST DRY 15560

HEMPADUR FAST DRY 15560 is a two-component, polyamine adduct cured epoxy paint with a very short drying time. Contains zinc phosphate.

As a quick drying primer or intermediate coat in HEMPADUR systems for especially fast recoatable in-shop applications. Can be used for on-site work too if VOC compliance is requested.

Flat Grey 12170 - Red-dish grey/12430* *Another shade: red 50630 may be available according to as-sortment list.

62 ± 1 100 micron 6.2 m²/litre 330 g/litre (According to EPA Fed Ref Method 24) 355 g/litre

Sa 2½ 08450

HEMPADUR 15570 HEMPADUR 15570 is a two component, polyamide-adduct cured epoxy paint, which cures to a strong and highly corrosion resistant coating, at tempe-ratures down to -10°C/14°F. The Micaceous Iron Oxide pigmented light grey 12430 quality is also well suited for application under humid condi-tions, on damp steel surfaces, and may be applied on moist surfaces.

1. As a maintenance and repair primer, intermediate, and/or finishing coat in HEMPADUR systems in a severely corrosive environment. As a finishing coat where a cosmetic appearance is of less importance.2. As a low temperature curing epoxy primer, intermediate, and/or finishing coat inpaint systems according to specification. Well suited as a (blast) primer in coal tar epoxy systems.3. Mist coat on GALVOSIL.

Flat Reddish grey/12430* (MI0) Red/50630* *Another shade: grey 12170 may be available according to as-sortment list.

54 ± 1 55 ± 1

100 micron 5.4 m2/litre 5.5 m2/litre


Sa 2½ 08450

HEMPADUR ZINC 17320

HEMPADUR ZINC 17320 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-re-sistant coating. Offers cathodic protection of local mechanical damage.

As a versatile, long-term primer on steel for epoxy, vinyl and acrylic coating systems in medium to severely corrosive environments.

Flat Red-grey/19830


HEMPADUR ZINC 17340

HEMPADUR ZINC 17340 is a two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.

1. As a "V.O.C. compliant" primer on steel in a medium to severely corrosive environment. May be applied on zinc-shopprimed steel, where damaged spots,welds etc. have been power tool cleaned.2. For on-line application on containers. In compliance with SSPC-Paint 20, type 2, level 3.

Semi-flat Red-grey/19830


HEMPADUR ZINC 17360

HEMPADUR ZINC 17360 is a two-component, zinc rich epoxy primer. It cures to a hard wearing and highly weather-re-sistant coating. Offers cathodic protection of local mechanical damage.

As a "V.O.C.-compliant", versatile, long-term primer on steel for epoxy, vinyl and acrylic coating systems in medium to severely corrosive environments. In comp-liance with SSPC-Paint 20, type 2, level 2 and ISO 12944-5.

Flat Red-grey/19830


HEMAPDUR FAST DRY 17410

HEMPADUR FAST DRY 17410 is a two-component, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Contains zinc phosphate.

As a quick drying primer or intermediate coat in HEMPADUR systems, for shop and site ap-plications.

Semi-gloss Grey/11480 - Reddish Grey/12430 (MIO version)

74 ± 1 100 micron 7.4 m2/litre 238 g/litre Sa 2½ Depen-ding on purpose usually less than 5% THINNER 08450.

HEMPADUR QUATTRO 17634

HEMPADUR QUATTRO 17634 is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

As a universal epoxy and self-primed high performance coating system for atmospheric or in-wa-ter service, including water ballast tanks to be coated according to IMO-PSPC requirements (Resolu-tion MSC.215(82)). HEMPADUR QUATTRO 17634 is intended for all year application down to -10°C/14°F and for in-shop applications where fast recoating and handling is required.

Semi-flat Red/50630* * other shades according to as-sortment list.


Issued: April 2010


Volume solids, %




Thinner

HEMAPDUR MULTI-STRENGTH GF35870

HEMPADUR MULTI-STRENGTH GF 35870 is an amine-adduct cured epoxy coating - the produ-ct is reinforced with Glassflakes. It is a hard, impact and abrasion resistant coating with good resistance to sea water, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Suitable for early water exposure and will continue to cure under water.

As a self-primed, high build coating primarily for areas subject to abrasion and/or to a highly corrosive environment. E.g. splash zones, jetty pilings and working decks. Can be used as interior lining for crude oil and fuel oil storage tanks.

Glossy Black/19990

87 ± 1 350 microns 2.5 m2/litre 180 g/litre Sa 2½ 08450

HEMPADUR 45141/3 HEMPADUR 45141/45143 is a two-component, polyamide ad-duct cured epoxy paint with good wetting properties and low water permeability. It is selfpriming and forms a hard and tough coating which has good resistance against abrasion and impact as well as to seawater, mineral oils, aliphatic hydrocarbons and splashes from petrol and related products. Harmless to grain cargoes.

1. As a high build primer, interme-diate and/or finishing coat in (he-avy duty) paint systems according to specification. (As a finishing coat where a cosmetic appe-arance is of less importance). 2. For repair and maintenance work at application temperatures above -10°C/15°F on hatch covers, decks, in cargo holds, etc. 3. As a ballast tank coating. HEM-PADUR 45143 is intended for use in cold/temperate climates, HEMPADUR 45141 for warmer climates .

Semi-gloss Red/50630* *Other shades including a MIO version, colour no. 12430, according to assortment list.


HEMPADUR 45150 HEMPADUR 45150 is a two-component, high solids, po-lyamine cured epoxy paint with good self-priming properties.

Especially for repair and mainte-nance work when high demands to surface preparation cannot be obtained completely and where good compatibility with existing paint system is required. Facilitates furthermore a high dry film thickness per touch-up coat. May be used as a high build primer, intermediate and/or finishing coat in paint systems according to specification when a low solvent content and high film thickness per coat are required. As a finishing coat where a "cosmetic appearance" is of less importance.

Semi-gloss Red/50630* - Grey/12170*

82 ± 1 200 micron 4.1 m²/litre 170 g/litre min. Sa 2, prefe-rably to Sa 2½

08450

HEMAPDUR FAST DRY 45410

HEMPADUR FAST DRY 45410 is a two-component, high solid epoxy paint. Pigmented with zinc phosphate.

As a fast curing topcoat in a mild to severely corrosive environment.As one coat direct to metal in a mild corrosive environment. As a topcoat where the usual cosmetic performance of epoxy coatings is acceptable.

Semi-flat Grey/12170* *Another shade grey 11480 according to as-sortment list.


HEMPADUR MULTI-STRENGTH 45751

HEMPADUR MULTI-STRENGTH 45751/45753 is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating.

As a heavy duty coating for areas exposed to abrasion and aggressive corrosive climates such as ramps, ship hulls and holds of bulk carriers. As a ballast tank coating for special purposes such as chemical carriers; carrying hot cargoes and other purposes where “pure epoxy coating” is requested. As a finishing coat where a cosmetic appearance is of less importance.

Semi-gloss 79 ± 1 200 micron 4.0 m²/litr 260 g/litre min. Sa 2½ 08450

HEMPADUR MASTIC 4588W

HEMPADUR MASTIC 4588W is a two-component high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

As a selfprimed paint system or as an intermediate coat in heavy duty paint systemsfor atmospheric exposure, where low VOC and high film build are required.Especially suited for application at low tem-peratures (down to -10°C/15°F) and where arelatively short recoating interval is required (one day, one coat).

Semi-gloss Grey/12170

80 ± 1 200 micron 4.0 m²/litre 200 g/litre min. St 2 , min. Sa 2, preferably to Sa 2½.

Depen-ding on purpose usually less than 5% THINNER 08450.

HEMPADUR MASTIC 45880/1

HEMPADUR MASTIC 45880/45881 is a two-component polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and tough coating, has good wetting properties and low temperature curing.

As a selfprimed, surface tolerant paint system or as an intermediate or finishing coat in heavy duty paint systems where low VOC and high film build are required. Multipur-pose coating as per specification for maintenance and minor repairs in im-mersed areas including ballast tanks and underwater hull. Specifically in those cases where a need for fewer products outweighs more specialised coatings. Can be specified where extended recoating properties for polyurethane topcoats are requested (typically travel coating). May be used directly on cured zinc silicate (GAL-VOSIL products) or spray-metallised surfaces to minimise popping. As a topcoat where the usual outdoor cosmetic appearance of epoxy paints is acceptable.

Semi-gloss Grey/12170*

80 ± 1 200 micron 4.0 m2/litre 220 g/litre min. St 2, min. Sa 2 preferably to Sa 21/2


Epoxy

Issued: April 2010


Volume solids, %




Thinner

HEMPADUR 47140 HEMPADUR 47140 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.

As a primer in mild to medium atmospheric environments. As an intermediate or finishing coat in epoxy systems in medium to severely cor-rosive atmospheric environments. As a finishing coat where the usual out-door cosmetic appearance of epoxy paints is acceptable. May be used directly on cured zinc silicate (GAL-VOSIL products) or spray-metallised surfaces to minimise popping.

Semi-gloss Cream/20450 (RAL 9001) - Light grey/11150 (RAL 7035)



HEMPADUR ZP 47940 HEMPADUR ZP 47940 is a two-component polyamide adduct cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. Pigmented with zincphosphate.

As a primer in epoxy systems in atmospheric exposure.

Semi-gloss Grey/12170 - Red/50630

76 ± 1 125 micron 6.1 m²/litre 245 g/litre Sa 2½ Depen-ding on purpose usually less than 5% THINNER 08450.

HEMPADUR MIO 47950

HEMPADUR MIO 47950 is a two-component polyamide adduct cured, high build epoxy paint which combines a relati-vely high volume solids content with a short drying time. Has a high load of MIO-pigment.

As an intermediate or finishing coat in epoxy systems in atmos-pheric exposure.

Semi-gloss MIO grey/12130 - grey/13480



HEMPADUR 47960 HEMPADUR 47960 is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant. Prolonged recoating properties. Pigmented with zinc phosphate.

As a primer in mild to medium atmospheric environments.As an intermediate or finishing coat in epoxy systems in medium to severely corrosiveatmospheric environments.As a one coat self priming epoxy topcoat available in various shades.May be used directly on cured zinc silicate (GALVOSIL products) or spray-metallisedsurfaces to minimise popping.

Semi-gloss Grey/11480 - Red/50710*) *)Other shades according to as-sortment list.



HEMPADUR 85671 HEMPADUR 85671 is a two-component, amine adduct cured phenolic epoxy (novolac) coating with very good adhesion and high temperature, water and chemical resistance.

As an interior lining in tanks, pipelines etc. for hot water, brine, crude oil, etc. For coating of pota-ble water tanks. As a primer coat in specific painting systems.

Flat Off-white/11630 - Light red/50900

68 ± 1 100 micron 6.8 m²/litre 316 g/litre Sa 2½-3 08450

HEMUDUR 18500 HEMUDUR 18500 is a water-borne two-component polyamine cured epoxy primer containing corrosive inhibiting pigment. It cures to a strong and rust-preventing coat.

In mildly to moderately corrosive environments as a general purpo-se primer on steel constructions (see REMARKS overleaf).

Semi-flat Grey/12170 - Red/51320


HEMUDUR ZINC 18560 HEMUDUR ZINC 18560 is a three-component, water-borne, zinc rich epoxy primer. It cures to a strong and anticorrosive coating that offers cathodic protection of local mechanical damage.

In moderately to severely atmospheric exposure as an anti-corrosive primer for waterborne paint systems. In compliance with SSPC-Paint 20, type 2, level 1 and ISO 12944-5.

Flat Grey/19840


Epoxy


Volume solids, %




Thinner

HEMPATHANE ENAMEL 55100

HEMPATHANE ENAMEL 55100 is a two-component, high-gloss acrylic polyurethane enamel, cured with aliphatic isocyanate, with good gloss and colour retention.

As a glossy decorative finishing coat on a variety of substrates such as steel, aluminium, glassfibre, reinforced polyester, plywood, hardwood etc. in severely corrosive atmospheric environments.

High-gloss White/10000*

52 ± 1 35 micron 14.9 m2/litre 440 g/litre Application for clean and dry surface.

08080

HEMPATHANE TOPCOAT 55210

HEMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured with aliphatic isocyanate, with good gloss and colour retention.

As a finishing coat for protection of structural steel in severely cor-rosive atmospheric environments, where light-fastness and gloss retention are required.

Glossy White/10000 - Blue/30840*


08080

HEMPATHANE HS 55610

HEMPATHANE HS 55610 is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention. Con-tains zinc phosphate.

As a VOC-compliant, high-build finishing coat for protection of structural steel in corrosive environments.

Glossy White/10000*


08080

Polyurethane

Issued: April 2010

Note: The data, specifications and recommendations provided in this overview of Hempel’s most frequently used protective paints are obtained from individual product data sheets. This is a summary only, not complete information and is subject to change. Therefore, it is exclusively the responsibility of the user to obtain accurate, complete and appropriate information in relation to any particular intended use of these and other Hempel products. Unless expressly agreed otherwise in writing, the products are supplied and all technical assistance is provided subject to Hempel’s general terms and conditions of sale, delivery and service. Except as expressed in said general terms and conditions, the manufacturer and seller waive all claims involving any liability, including but not limited to negligence, for all results, injury, or direct or indirect losses or damages arising from the use of the products as recommended above or otherwise. Product data are subject to change without notice and in any case should no longer be regarded as authoritative three years from the date of this information’s issue.

*Wide range of colours available via Hempel's MULTI-TINT system.


Volume solids, %




Thinner

HEMPEL'S SILICONE ALUMINIUM 56910

HEMPEL’S SILICONE ALUMINIUM 56910 is a heat resistant aluminium pig-mented polysiloxane paint.

For long-term protection of hot pipelines, exhaust pipes, smoke stacks and other hotsurfaces. In a corrosive environment see PRECEDING COAT overleaf.

Semi-flat Aluminium/19000


Silicone

Zynk-Si


Volume solids, %




Thinner

HEMPEL'S GALVOSIL 15700

HEMPEL’S GALVOSIL 15700 is a two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion. It has excellent chemical resistance within the pH range 6-9. For service temperature range, see below. Applicable by airless spray. Of-fers cathodic protection of local mechanical damage.

1. As a general purpose, heavy-duty, rust-preventing primer.2. As a single, complete coating for long-term protection of steel exposed to moderately to severely corrosive environments and to abrasion.3. As a tank lining in accordance with the CARGO PROTECTION GUIDE.In compliance with SSPC-Paint 20, type 1, level 1 and ISO 12944-5.

Flat Metal grey/19840

64 ± 1 50 micron 12.8 m²/litre 434 g/litre min. Sa 2½ 08700

HEMPEL'S SHOPPRIMER ZS 15890

HEMPEL’S SHOPPRIMER ZS 15890 is a two-component, solvent-borne zinc ethyl silicate shopprimer, designed for automatic spray application. Especially suited, where welding (MIG/MAG) and gas-cutting properties are of importance.

For short to medium-term protection of abrasive blast cleaned steel plates and other structural steel during the storage, fabrication, and construction periods.

Flat Reddish grey/19890 - Grey/19840

28 ± 1 15 micron 18.7 m²/litre 620 g/litre min. Sa 2½ 08570 or 08700

Corporate Colour EquivalentsRAL K-5

RAL Hempel Colour RAL Hempel Colour RAL Hempel Colour

RAL 1000 22500RAL 1001 24900RAL 1002 20470RAL 1003 27030RAL 1004 27040RAL 1005 27050RAL 1006 20820RAL 1007 27070RAL 1011 27110RAL 1012 23120RAL 1013 17130RAL 1014 20420RAL 1015 27150RAL 1016 27160RAL 1017 27170RAL 1018 27180RAL 1019 27190RAL 1020 27200RAL 1021 20250RAL 1023 27230RAL 1024 27240RAL 1026 27260RAL 1027 27270RAL 1028 27280RAL 1032 27320RAL 1033 27330RAL 1034 27340RAL 1035 19350RAL 1037 27370RAL 2000 22120RAL 2001 50060RAL 2002 57020RAL 2003 57030RAL 2004 50190RAL 2005 50180RAL 2007 57070RAL 2008 57080RAL 2009 57090RAL 2010 57100RAL 2011 57110RAL 2012 57120RAL 2013 59130RAL 3000 50170RAL 3001 57150RAL 3002 50740RAL 3003 51710RAL 3004 50100RAL 3005 51800RAL 3007 57370RAL 3009 53090RAL 3011 57310RAL 3012 57320RAL 3013 57330RAL 3014 57340RAL 3015 57350RAL 3016 57460RAL 3017 57470RAL 3018 57480RAL 3020 57200RAL 3022 57520RAL 3024 57540RAL 3026 50090RAL 3027 57570RAL 3031 57410RAL 4001 37010RAL 4002 57620RAL 4003 57630

RAL 4004 57640RAL 4005 37050RAL 4006 57660 RAL 4007 57670RAL 4008 57680RAL 4009 57690RAL 4010 57700RAL 4012 38120RAL 5000 37000RAL 5001 37020RAL 5002 30170RAL 5003 37030RAL 5004 37040RAL 5005 37150RAL 5007 30570RAL 5008 32080RAL 5009 32090RAL 5010 30180RAL 5011 37110RAL 5012 35120RAL 5013 33930RAL 5014 37140RAL 5015 37240RAL 5017 37170RAL 5018 45180RAL 5019 30350RAL 5020 45200RAL 5021 40210RAL 5022 37220RAL 5023 37230RAL 5024 37440RAL 6000 46000RAL 6001 40050RAL 6002 47020RAL 6003 47030RAL 6004 41490RAL 6005 47050RAL 6006 47060RAL 6007 47070RAL 6008 47080RAL 6009 47090RAL 6010 40220RAL 6011 40840RAL 6012 47120RAL 6013 41130RAL 6014 47140RAL 6015 47150RAL 6016 47160RAL 6017 42600RAL 6018 42170RAL 6019 49500RAL 6020 47200RAL 6021 47210RAL 6022 47220RAL 6024 47240RAL 6025 47250RAL 6026 47260RAL 6027 47270RAL 6028 47280RAL 6029 47290RAL 6032 47320RAL 6033 47330RAL 6034 47340RAL 7000 10390RAL 7001 10400RAL 7002 17020RAL 7003 17030


Tilsvarende Hempel kulør.RAL K-5

RAL Hempel kulør RAL Hempel kulør RAL Hempel kulør


RAL 4004 57640RAL 4005 37050RAL 4006 57660 RAL 4007 57670RAL 4008 57680RAL 4009 57690RAL 4010 57700RAL 4012 38120RAL 5000 37000RAL 5001 37020RAL 5002 30170RAL 5003 37030RAL 5004 37040RAL 5005 37150RAL 5007 30570RAL 5008 32080RAL 5009 32090RAL 5010 30180RAL 5011 37110RAL 5012 35120RAL 5013 33930RAL 5014 37140RAL 5015 37240RAL 5017 37170RAL 5018 45180RAL 5019 30350RAL 5020 45200RAL 5021 40210RAL 5022 37220RAL 5023 37230RAL 5024 37440RAL 6000 46000RAL 6001 40050RAL 6002 47020RAL 6003 47030RAL 6004 41490RAL 6005 47050RAL 6006 47060RAL 6007 47070RAL 6008 47080RAL 6009 47090RAL 6010 40220RAL 6011 40840RAL 6012 47120RAL 6013 41130RAL 6014 47140RAL 6015 47150RAL 6016 47160RAL 6017 42600RAL 6018 42170RAL 6019 49500RAL 6020 47200RAL 6021 47210RAL 6022 47220RAL 6024 47240RAL 6025 47250RAL 6026 47260RAL 6027 47270RAL 6028 47280RAL 6029 47290RAL 6032 47320RAL 6033 47330RAL 6034 47340RAL 7000 10390RAL 7001 10400RAL 7002 17020RAL 7003 17030


Photographer: Bernd Duke

HEMPEL (UK) LTD.Llantarnam Industrial ParkGwent NP44 3XF CwmbranTel.: +44 (01633) 874024Fax: +44 (01633) 489089E-mail: [email protected]

GB

04

/201

0 E

N

hempel ral no

Documents

hempels paints

hempaquick primer

workshop primer

selected paints

specialised paints

supplier of paints

waterbased paints

general purpose primer