hello world

16
Elektroband Electrical steel strip

Upload: aloisaloish

Post on 08-Nov-2014

39 views

Category:

Documents


2 download

DESCRIPTION

Hello world

TRANSCRIPT

Page 1: Hello world

ElektrobandElectrical steel strip

Page 2: Hello world

CDW Elektroband – Mit Spannung zum Erfolg

Gestern Vision – heute Realität: Vor dem Hintergrund eines neuen

Bewusstseins bei der Energienutzung sind die Menschen heute auf-

geschlossen gegenüber innovativen Produkten, die Energie besonders

ressourcen- und umweltschonend einsetzen. Die technische Ent-

wicklung ermöglicht bereits heute die Herstellung smart konzipierter

Produkte, die über ihr energetisches Einsparpotenzial hinaus attraktiv

und begehrenswert und somit erfolgreich sind.

Die Elektroband-Werkstoffe von CDW tragen maßgeblich zu dieser

Entwicklung bei. Im Endprodukt vom Nutzer zumeist nicht wahrge-

nommen, liegt die Basis etlicher Antriebsinnovationen in der Lei-

stungsfähigkeit unseres Elektrobandes – vom Start-Stopp-System

bis hin zum reinen Elektroantrieb.

Auch in Zukunft werden unsere Werkstoffe bei der Entwicklung

emissionsfreier Fahrzeuge von großer Bedeutung sein. Denn überall

dort, wo Strom erzeugt, umgewandelt, gemessen oder mit hohem

Wirkungsgrad genutzt werden soll, geht es um Leistungsfähigkeit

und Effizienz. Diese Effizienz wird maßgeblich durch die Qualität des

Elektrobandes bestimmt, welches zur Herstellung der elektrischen

Komponenten verwendet wird – ganz gleich, ob es sich um Transfor-

matoren, Generatoren oder Elektromotoren handelt. Wir sind dafür

der richtige Partner.

CDW Electrical steel – Potential for your success

Understanding the implications of the most efficient use of energy

demonstrates a change in our awareness. Many people in these

times now deal with more economic and efficient use of energy in

different sectors. Environmental conditions and economic issues have

also influenced this development. All of these factors have changed

the willingness of humans to search for new mobility concepts.

Many of our customers’ products where our material is used

support and assist this development. It is often not enough to have

a quick glance at them – sometimes it takes a closer look to realise

their quality.

Wherever electricity is to be produced, dissipated, measured and

used, we are talking about effectiveness and efficiency. Above all, it

is the quality of electrical steel that makes transformers, generators

and electric motors more effective and efficient. C.D. Wälzholz is

the specialist for high quality electrical steel – and therefore we are

the partners you want.

02 Elektroband / Electrical steel strip

Page 3: Hello world

Elektroband von C.D. Wälzholz kommt in einer Vielzahl von Produkten zum Einsatz: Modernste Transportmittel, Anlagen zur Energieversor-gung und -gewinnung sowie Haushaltsgeräte sind Beispiele für die Verwendung dieses vielseitigen Werkstoffes.

Electrical steel produced by C.D. Wälzholz is a multi-purpose and versatile material. It is used in a number of different products such as state-of-the-art means of transportation, energy supply and energy generation equipment as well as household appliances.

Individuelle Entwicklung – unser Tagesgeschäft

Unsere Kunden benötigen für ihre sehr speziellen Anwendungen

häufig ein ganz individuelles Elektroband. Um mit unserem

Elektro band-Know-how Innovationsimpulse für intelligente Inno-

vationen geben zu können, begleiten wir unsere Kunden daher

bereits in frühen Entwicklungsstadien ihrer Fertigung.

Wir sind in den vielen Branchen unserer Kunden zuhause und

können mit unserer Erfahrung schnell maßgeschneiderte

Lösungen für unterschiedlichste Anforderungen bieten. Unsere

Produkte sind „State of the art“, immer mit dem Ziel, unseren

Kunden die gewünschte Kombination aus Leistungsfähigkeit und

Wirtschaftlichkeit zu liefern. Perfekt aufeinander abgestimmte

Entwicklungs- und Produktionsprozesse werden durch unser

Qualitätsmanagement-System zuverlässig abgesichert. So garan-

tieren wir geregelte und reproduzierbare Abläufe und eine kon-

stant hohe Produktqualität – weltweit.

Sprechen Sie mit unseren Fachleuten und überzeugen Sie sich

selbst, was wir bei der Weiterentwicklung von Elektroband unter

erfolgreicher Zusammenarbeit verstehen.

Special applications – developed just for you

Special applications require customised electrical steel.

C.D. Wälzholz is your partner in developing efficient solutions.

Together with your company, we will develop the optimal material

for the application you have in mind. Furthermore, we will support

the development process by means of our quality management

system. Therefore we can guarantee you controlled procedures and

process flows, which are reproducible and ensure continuous

product quality – especially to meet all your requirements.

Do not hesitate to talk to our highly qualified specialists. They will

show you what we mean when we talk about successful co operation

in the further development of electrical steel. See for yourself.

03Elektroband / Electrical steel strip

Page 4: Hello world

Mindestens und mehr – magnetische und technologische Eigenschaften

Bei der Produktion von kaltgewalztem Elektroband überlassen wir

nichts dem Zufall. Genau abgestimmte Gieß- und Warmwalzpara-

meter, computergesteuerte Fertigungssysteme mit integrierten

Regelkreisen für die automatische Maßfindung sowie die präzise

Steuerung der Kaltwalzwerke und rechnergesteuerte Glühprozesse

garantieren höchste Qualität.

Mehr noch: Umfangreiche Laborprüfungen begleiten die gesamte

Fertigung und ermöglichen die exakte Abstimmung der kennwert-

beeinflussenden Parameter. Zusätzlich ermöglichen wir die Rück-

verfolgbarkeit bis auf die Rohmaterialebene. So sichern wir nicht

nur die Qualität jedes einzelnen Auftrages, sondern auch seine

Reproduzierbarkeit.

Bezeichnung nach Denomination acc. to

Watt-Verlust max. bei Core loss at max.

Magnetische Polarisation J T min. im Wechselfeld bei einer magnetischen Feldstärke von

Magnetic polarisation J T min. in an alternating field with a magnetic field intensity of

CDW-Produktionsmittelwerte CDW-produticon averages

Dichte 1)

Density 1)

Watt-Verlust 2) max. beiCore loss 2) max. at

Rp0,2

[N/mm2]Rm

[N/mm2]Härte H5 Hardness HV5EN 10027-1 EN 10027-2 1,5 T / 50 Hz [W/kg] 2.500 [A /m] 5.000 [A /m] 10.000 [A /m] [kg/dm3] 1,0 T / 50 Hz [W/kg]

Nenndicke / Nominal thickness: 0,35 mm

M 235-35A3) 1.0890 2,35 1,49 1,60 1,70 430 560 215 7,60 0,95

M 250-35A 1.0800 2,50 1,49 1,60 1,70 360 510 200 7,60 1,00

M 270-35A 1.0801 2,70 1,49 1,60 1,70 350 500 190 7,65 1,10

M 300-35A 1.0804 3,00 1,49 1,60 1,70 345 490 170 7,65 1,20

M 330-35A 1.0803 3,30 1,49 1,60 1,70 335 480 155 7,65 1,30Nenndicke / Thickness: 0,50 mm

M 250-50A3) 1.0891 2,50 1,49 1,60 1,70 430 560 215 7,60 1,05

M 270-50A 1.0806 2,70 1,49 1,60 1,70 360 510 200 7,60 1,10

M 290-50A 1.0807 2,90 1,49 1,60 1,70 350 500 190 7,60 1,15

M 310-50A 1.0808 3,10 1,49 1,60 1,70 345 490 180 7,65 1,25

M 330-50A 1.0809 3,30 1,49 1,60 1,70 335 480 160 7,65 1,35

M 350-50A 1.0810 3,50 1,50 1,60 1,70 330 475 155 7,65 1,50

M 400-50A 1.0811 4,00 1,53 1,63 1,73 325 465 150 7,70 1,70

M 470-50A 1.0812 4,70 1,54 1,64 1,74 320 460 145 7,70 2,00

M 530-50A 1.0813 5,30 1,56 1,65 1,75 315 450 140 7,70 2,30

M 600-50A 1.0814 6,00 1,57 1,66 1,76 310 440 135 7,75 2,60

M 700-50A 1.0815 7,00 1,60 1,69 1,77 300 430 130 7,80 3,00

M 800-50A 1.0816 8,00 1,60 1,70 1,78 295 420 125 7,80 3,60

M 940-50A 1.0817 9,40 1,62 1,72 1,81 280 400 120 7,85 4,20Nenndicke / Nominal thickness: 0,65 mm

M 310-65A3) 1.0892 3,10 1,49 1,60 1,70 430 560 215 7,60 1,25

M 330-65A 1.0819 3,30 1,49 1,60 1,70 350 500 190 7,60 1,35

M 350-65A 1.0820 3,50 1,49 1,60 1,70 345 485 175 7,60 1,50

M 400-65A 1.0821 4,00 1,52 1,62 1,72 340 480 160 7,65 1,70

M 470-65A 1.0823 4,70 1,53 1,63 1,73 335 475 155 7,65 2,00

M 530-65A 1.0824 5,30 1,54 1,64 1,74 325 465 150 7,70 2,30

M 600-65A 1.0825 6,00 1,56 1,66 1,76 315 450 140 7,75 2,60

M 700-65A 1.0826 7,00 1,57 1,67 1,76 310 440 135 7,75 3,00

M 800-65A 1.0827 8,00 1,60 1,70 1,78 300 430 130 7,80 3,60

M 1000-65A 1.0829 10,00 1,61 1,71 1,80 280 400 120 7,80 4,40Nenndicke / Nominal thickness: 1,00 mm

M 600-100A 1.0893 6,00 1,53 1,63 1,72 340 485 180 7,60 2,60

M 700-100A 1.0894 7,00 1,54 1,64 1,73 330 475 160 7,65 3,00

M 800-100A 1.0895 8,00 1,56 1,66 1,75 320 460 150 7,70 3,60

M 1000-100A 1.0896 10,00 1,58 1,68 1,76 295 420 125 7,80 4,40

M 1300-100A 1.0897 13,00 1,60 1,70 1,78 280 400 120 7,80 5,801) Andere Dichtewerte können vereinbart werden. / Other density values on agreement. 2) Nicht verbindlich nach Norm EN10106. / Not obilgatory acc. to DIN EN 10106. 3) Güten auf Anfrage / Grades on enquiry

04 Elektroband / Electrical steel strip

Page 5: Hello world

Magnetic and technological properties

Trust us – we really leave nothing to chance when it comes to the

production of cold-rolled electrical steel. Therefore we can

guarantee the superior quality for which we are known. Our state-

of-the-art CIM manufacturing systems have integrated control

circuits to ensure dimensional accuracy. All our cold rolling mills

are equipped with advanced control systems.

Even the annealing processes are computer controlled. But there is

more. Extensive laboratory tests accompany the entire production

process. Thus the coordination of critical parameters is facilitated.

Finally, in our production processes each product can be traced

down to the raw material level. This does not only guarantee perfect

quality for each individual order, but it also means that each order

can be easily reproduced.

Watt-Verlust max. bei Core loss max. at

Gütenbezeichnung nach gängigen internationalen Normen Denomination of grades according to common international standards

EN 10106 IEC 404-8-4 JIS C2552 GOST 21427.2 ASTM A677-07 AISI GB/T2521

1,5 T / 50 Hz [W/kg] 1,5 T / 60 Hz [W/lbs] (2007) (1998) (2000) (1983) (2007) (1983) (1996)

Nenndicke 0,35 mm / Nominal thickness 0,014 inch

2,35 M 235-35A 35A230 35W230

2,50 1,45 M 250-35A 250-35A5 35A250 2413 36F145 M-15 35W250

2,70 1,55 M 270-35A 270-35A5 35A270 2412 36F155 M-19 35W270

3,00 1,75 M 300-35A 300-35A5 35A300 2411 36F175 M-22 35W300

3,30 1,85 M 330-35A 330-35A5 36F185 M-36 35W330Nenndicke 0,50 mm / Nominal thickness 0,020 inch

2,50 M 250-50A 50W250

2,70 1,65 M 270-50A 270-50A5 50A270 2414 47F165 M-15 50W270

2,90 1,80 M 290-50A 290-50A5 50A290 2413 47F180 M-19 50W290

3,10 1,90 M 310-50A 310-50A5 50A310 2412 47F190 M-22 50W310

3,30 2,00 M 330-50A 330-50A5 50A330 47F200 M-27 50W330

3,50 2,10 M 350-50A 350-50A5 50A350 2411 47F210 M-36 50W350

4,00 2,40 M 400-50A 400-50A5 50A400 2216 47F240 M-43 50W400

4,70 2,80 M 470-50A 470-50A5 50A470 2214 47F280 50W470

5,30 M 530-50A 530-50A5 2212 M-45 50W540

6,00 M 600-50A 600-50A5 50A600 2112 50W600

7,00 4,00 M 700-50A 700-50A5 50A700 2111 47F400 M-47 50W700

8,00 4,50 M 800-50A 800-50A5 50A800 2011 47F450 50W800

9,40 M 940-50A 50A1000 50W1000Nenndicke 0,65 mm / Nominal thickness 0,0206 inch

3,10 M 310-65A 65W600

3,30 2,00 M 330-65A 64F200 65W700

3,50 2,10 M 350-65A 350-65A5 64F210 M-19 65W800

4,00 2,35 M 400-65A 400-65A5 64F235 M-27 65W1000

4,70 2,75 M 470-65A 470-65A5 64F275 M-43 65W1300

5,30 3,20 M 530-65A 530-65A5 2312 64F320 65W1600

6,00 M 600-65A 600-65A5 2212 M-45

7,00 M 700-65A 700-65A5 2212

8,00 5,00 M 800-65A 800-65A5 65A800 2122 64F500 M-47

10,00 5,50 M 1000-65A 1000-65A5 65A1000 64F550Nenndicke 1,00 mm / Nominal thickness 0,039 inch

6,00 M 600-100A

7,00 M 700-100A

8,00 M 800-100A

10,00 M 1000-100A

13,00 M 1300-100A

05Elektroband / Electrical steel strip

Page 6: Hello world

Dünnes Elektroband für höhere und mittlere Frequenzen / Thin electrical steel strip for medium and high frequency applications

Güte Grade

Nenndicke Nominal thickness

Ummagnetisierungsverlust max. Core loss max.

Mechanische Kennwerte Mechanical values

Dickentoleranz Thickness tolerance

[mm] 1,0T / 400 Hz 1,0T / 700 Hz 1,0T / 1.000 Hz Rp0,2 [MPa] Rm [MPa] [mm]

NO 20 1) 0,20 15 32 52 min. 330 min. 450 +/- 0,02

NO 23 0,23 16 35 57 min. 330 min. 450 +/- 0,02

NO 25 0,25 16 38 62 min. 330 min. 450 +/- 0,02

NO 27 0,27 17 40 65 min. 330 min. 450 +/- 0,02

NO 30 0,30 18 42 72 min. 330 min. 450 +/- 0,02

1) nach EN 10303; max.Lieferbreite: 1.000 mm; Güten NO 10 und NO 15 auf Anfrage / 1) acc. to EN 10303; max. width: 1.000 mm; grades NO 10 and NO 15 on enquiry

NO-Güten für Anwendungen bei mittleren und hohen Frequenzen

NO-Grades Electrical steel for medium and high frequency

Technisch anspruchsvolle Produkte erfordern technisch hochwer-

tige Vormaterialien. So stellen beispielsweise Elektromotoren

besonders hohe Anforderungen an das eingesetzte Elektroband,

wenn Leistungsverluste durch Ummagnetisierung auf ein Minimum

reduziert werden sollen.

Durch die Herstellung extrem dünner Elektrobänder mit einem

präzise definierten Silizium- und Aluminium-Anteil gelingt es CDW,

den hohen Anforderungen heutiger Hybrid- und E-Traktions motoren

im Hinblick auf magnetische Hochfrequenz-Eignung und mecha-

nischen Eigenschaften gerecht zu werden.

Durch unsere fundierte Erfahrung bei der Herstellung spezieller

Elektrobandprodukte können wir Ihnen neben der Normgüte NO 20

nach DIN EN 10303 weitere dünne Elektrobänder anbieten, die wir

genau auf Ihre Anforderungen abstimmen. Fordern Sie uns.

High technological products require technological high quality raw

material. The need to develop more efficient and cost-optimized

alternative drive trains for e-mobility in the automotive sector also

creates the opportunity for C.D. Wälzholz to strike new paths in the

domain of electrical steel.

As a result of our development we are able to provide materials

with high frequency qualification and high mechanical properties.

Our material meets the characteristics of today’s heavy-duty Hybrid

and E-traction engines, but we also look to exceed these charac ter-

istics well into the future.

In addition to the Standard grade NO 20 according to EN 10303 we

can provide thin electrical steels that are tailored to your require-

ments. Give us a challenge.

06 Elektroband / Electrical steel strip

Page 7: Hello world

Zukunft macht neugierig – die Entwicklung hochpermeabler Güten

Curious about the future – the development of high permeable grades

Anforderungen, die noch vor Jahren unvereinbar schienen, las sen

sich heute mit dem richtigen Know-how umsetzen, so etwa niedri ge

Ummagnetisierungsverluste in Verbindung mit hoher Permeabilität.

Unsere HP und CDW-Perm® Güten in lackisolierter und blanker

Aus führung ermöglichen die Vereinbarung eigentlich gegensätz-

licher Anforderungen für die Entwicklung modernster elektrischer

Maschinen. Die CDW-Perm® Güten zeichnen sich darüber hinaus

durch deutlich erhöhte Wärmeleitfähigkeit und verbesserte Stanz-

barkeit aus.

Only a few years ago there were a number of goals and require-

ments, which seemed incongruous and incompatible.

Now, for C.D. Wälzholz, they are no longer a problem. Take the need

for low core losses in conjunction with high permeability, for

example. Our grades HP and CDW-Perm® are a good example for

the fact that we can actually play a major role in the development of

modern electrical equipment. Additionally the grades CDW-Perm®

are characterized by a significantly improved thermal conductivity

and an improved punchability.

Magnetische Eigenschaften von HP-Material / Magnetic properties of HP-material

Bezeichnung Denomination

Min. magnetische Polarisation bei Min. magnetic polarisation at

2.500 [A/m]

Typ. magnetische Polarisation bei Typ. magnetic polarisation at

2.500 [A/m]

Typ. Streckgrenze Rp0,2 Typ. yield strength Rp0,2

Typ. Zugfestigkeit Rm Typ. tensile strength Rm

Typ. Dehnung Typ. elongation

Typ. Härte Typ. hardness

Wärmeleitfähigkeit

Thermal conductivity

DIN EN 10106:2007 [T] DIN EN 10106:2007 [T] [MPa] [MPa] A80 [%] HV5 [W/mK]

Nenndicke: 0,50 mm / Nominal thickness: 0,50 mm

M 350-50 A HP 1,50 1,56 340 470 29 160 24,5

M 400-50 A HP 1,53 1,58 340 470 29 160 24,5

M 470-50 A HP 1,54 1,59 300 430 30 135 30,3

M 530-50 A HP 1,56 1,61 300 430 30 135 30,3

M 600-50 A HP 1,57 1,62 295 425 31 130 33,6

M 700-50 A HP 1,60 1,65 295 425 31 130 33,6

M 800-50 A HP 1,60 1,65 290 410 33 120 42,4

M 940-50 A HP 1,62 1,67 290 410 33 120 42,4Nenndicke: 0,65 mm / Nominal thickness: 0,65 mm

M 400-65 A HP 1,52 1,57 335 460 30 165 24,5

M 470-65 A HP 1,53 1,58 340 470 30 165 24,5

M 530-65 A HP 1,54 1,59 340 470 30 165 24,5

M 600-65 A HP 1,56 1,61 300 430 32 140 30,3

M 700-65 A HP 1,57 1,62 300 425 32 130 33,6

M 800-65 A HP 1,60 1,66 290 410 34 120 42,4

M 1000-65 A HP 1,61 1,66 290 410 34 120 42,4Nenndicke: 1,00 mm / Nominal thickness: 1,00 mm

M1400-100 A HP 1,60 1,70 295 395 31 130 57

Eigenschaften von CDW-Perm® / Properties of CDW-Perm®

Bezeichnung Denomination

Min. magnetische Polarisation bei Min. magnetic polarisation at

2.500 [A/m]

Typ. magnetische Polarisation bei Typ. magnetic polarisation at

2.500 [A/m]

Typ. Streckgrenze Rp0,2 Typ. yield strength Rp0,2

Typ. Zugfestigkeit Rm Typ. tensile strength Rm

Typ. Dehnung Typ. elongation

Typ. Härte Typ. hardness

Wärmeleitfähigkeit Thermal conductivity

DIN EN 10106:2007 [T] DIN EN 10106:2007 [T] [MPa] [MPa] A80 [%] HV5 [W/mK]

Nenndicke: 0,50 mm / Nominal thickness: 0,50 mm

CDW PERM®400-50A 1,53 1,62 300 430 30 130 30Nenndicke: 0,65 mm / Nominal thickness: 0,65 mm

CDW PERM®470-65A 1,53 1,62 300 430 30 130 30

07Elektroband / Electrical steel strip

Page 8: Hello world

Kein Widerspruch – Ökonomie und Ökologie bei Lacksystemen

No contradiction – our coating systems combine economy with ecology

Auch bei den Isolationslacken haben Sie die Wahl zwischen

unseren klassisch bestehenden und eigens für Ihre speziellen

Anforderungen entwickelten Systemen. Neben den primären Isolati-

onseigenschaften optimieren wir durch kontinuierlich verbesserte

Lacksysteme auch die Verarbeitungseigenschaften wie Stanzbarkeit

und Schweißbarkeit des Elektrobandes.

Statt einer strikten Trennung zwischen organischen und anorga-

nischen Lacken steht heute die Kombination dieser Substanzen im

Vordergrund unserer Entwicklungsarbeit. In einem intensiven Dialog

mit Kunden und Herstellern entstehen neue Produkte, die präzise

auf die spezifischen Anforderungen der verschiedenen Verarbei-

tungsprozesse abgestimmt sind.

Umweltschutz hat Tradition bei uns, und so setzen wir heute fast

ausschließlich auf wasserlösliche Lacksysteme. Diese Lacke ent-

halten keine deklarationspflichtigen bzw. für Mensch oder Umwelt

schädliche Substanzen.

Wir schaffen die Verbindung von Ökonomie und Ökologie – für gute

und sichere Produkte.

It is the customer who makes the important choices – even with

regards to insulation coating. Do you prefer one of our standard

insulation systems or an insulation system just for your special

needs? No problem. We continuously improve our coating systems

by optimising processing qualities like punching properties and

weldability as well.

We do not think much of strictly separating between organic and

inorganic coatings, and we are convinced that a combination of

both should be the main focus of development. As a result of an

intensive dialogue with customers and manufacturers alike, new

and innovative products emerge. They are precisely tailored to

different processing requirements.

Environmental protection has always been important to C.D. Wälzholz.

Therefore we scarcely use anything else but water-soluble coating

systems. You can rest assured that our coatings do not contain

substances which require declaration or are harmful to either

people or environment.

C.D. Wälzholz has managed to combine economy and ecology –

in order to produce safe products of outstanding quality.

Lacksysteme / Coating systems

ASTM-Klasse ASTM-Class

IEC-Klasse IEC-Class

CDW-Lacktyp CDW-Varnish type

Farbe Colour

Schichtdicke je Seite Thickness per side

Dauerwärmebeständigkeit unter Luft

Continuous thermal resistance under air

Glühbeständigkeit unter Schutzgas

Annealing resistance under inert gas

Isolationswiderstand Ω Surface resistence

Chemische Beständigkeit

Chemical resistance

Schweißbarkeit Weldability

[µm] IEC 60404-12:99 [°C] IEC 60404-12:99 [°C] ASTM 717 [   cm²/lam] DIN 8944 SEP 1210

C-3 EC-3 PH3 goldgelb golden yellow

1 - 7 180°C�

10 - 200 beständig resistant �

Backlack Bonding varnish

4 - 6 180°C� �

C-5 EC-5 AN50 hellgrün light green

0,5 - 1,5 210°C 850°C 5 - 50 beständig resistant �

AN8 grau grey

1 - 5 270°C 850°C 20 - 200 beständig resistant �

C-6 EC-6 PH2 grau grey

2 - 7 180°C 450°C > 10.000 beständig resistant �

PH20 grau grey

1 - 3 180°C 450°C > 10.000 beständig resistant �

08 Elektroband / Electrical steel strip

Page 9: Hello world

Powerful – Water soluble bonding varnish

Important properties of our bonding varnish:» No squeezing during bonding

» Based on water soluble epoxy resin

» Good stampability and applicable for laser cutting

» Compatibility with different insulation systems

Punching stacks made out of electrical steel strip can be bonded in

different methods. Over the last past years, this type of solution has

been well-established in the market.

No other technology pursues the background of non-contact,

holohedral and re sis tant bonding as consequent as the CDW

Bonding varnish technology. The method provides an advantage in

noise reduction and in higher impermeability of the stacks. Such

densities cannot be achieved through other types of bonding as

welding, punch-stacking, riveting or clamping. The compatibility

with different insulation systems and utilizing serial processing

allows the flexible use of CDW‘s bonding varnish. Last but not least

large volumes in continuous processes are no longer a vision.

Stark – Wasserlöslicher Backlack

Wichtige Eigenschaften des Backlacks:» Kein Austreten von Lack bei der Verklebung

» Wasserlösliches Lacksystem

» Sehr gutes Stanz- / Laser-Verhalten

» Kombinierbarkeit mit anderen Lacksystemen

Präzision und Stabilität von Lamellenpaketen sind relevant für die

Verlustminimierung und den magnetischen Fluss. Die wasserlös-

lichen Lacksysteme von CDW haben sich im Hinblick auf diese

Fakto ren in den letzten Jahren als wichtige Lösung etabliert.

Die CDW-Backlacktechnik verfolgt den Ansatz einer kontaktfreien,

vollflächigen und belastbaren Verbindung äußerst konsequent. Der

spezielle Elektroblechlack ermöglicht prozesssichere Systeme mit

hohen Klebefestigkeiten. Die Vorteile: Der Magnetfluss wird nicht

durch Schweißnähte oder die für das Stanzpaketieren notwendigen

Ausnehmungen unterbrochen. Zudem bietet die Technologie eine

geringe Geräuschentwicklung und eine höhere Dichtheit des Paketes.

Die Kombinierbarkeit mit anderen Lacksystemen und eine Verarbei-

tung in Durchlaufprozessen ermöglichen den flexiblen Einsatz von

Backlack auch bei großen Stückzahlen.

Trocknen des Lackes im DurchlaufofenDrying the varnish in a continuous furnace

Temperatur + DruckTemperature + Pressure

Blech unlackiertUncoated steel

BacklackBonding varnish Zustand A = Flüssig / State A = Liquid

Auftragen des Lackes im Coil-Coating-Verfahren (ein- oder beidseitig)Coating of the strip surface by coil coating system/process (one- or both sided)

Zustand B = Aktiv / State B = Active

Mit Backlack beschichtetes BandSteel strip coated with bonding varnish

Zustand C – Passiv State C – Passive

Lamellenpaket im Verbackungs-werkzeug – Aushärtung des Lackes

Lamination stack in bonding tool – hardening of the varnish

Ausgestanzte Lamellen – Bereit zum Verbacken Stamped parts – ready for bonding process

09Elektroband / Electrical steel strip

Page 10: Hello world

Magnetweicheisen (RFe-Güten) / Soft magnetic materials (RFe-grades)

Güte nach DIN 17405 Grade acc. to DIN 17405

WerkstoffnummerMaterial number

Güte nach DIN EN 10304Grade acc. to DIN EN 10304

Koerzitivfeldstärke max. nach ReferenzglühungCoercitive field strength after reference annealing

Härte Hardness

Magnetische Induktion in [T] Magnetic induction in [T]

LieferzustandDelivery condition

[A/m] [HV] 500 [A/m]

RFe 120 1.1012 M120 120 max. 150 1,30 GT / GB

RFe 100 1.1013 M100 100 max. 150 1,30 GT / GB

RFe 80 1.1014 M80 80 max. 150 1,30 GT / GB

RFe 40 1.1016 M40 40 max. 150 1,35 GT / GB

Polbleche nach EN DIN 10265:1996 / Pole sheets acc. to EN DIN 10265:1996

Güte Grade

WerkstoffnummerMaterial number

Streckgrenze Rp0,2 min.Yield strength Rp0,2 min.

Zugfestigkeit Rm minTensile strength min.

Dehnung min.Elongation min.

Polarisation min. bei 5.000 [A/m] Magnetic polarisation min. at 5.000 [A/m]

Polarisation min. bei 15.000 [A/m] Magnetic polarisation min. at 15.000 [A/m]

[MPa] [MPa] A80 [%] [T] [T]

250-100-TF 183 1.0280 250 375 16 1,60 1,83

300-100-TF 182 1.0281 300 390 15 1,55 1,82

350-100-TF 181 1.0282 350 440 13 1,52 1,81

400-100-TF 180 1.0283 400 460 10 1,50 1,80

C.D. Wälzholz bietet seinen Kunden eine breite Palette von Pol-

blechen nach DIN EN 10265 mit definierten mechanischen Eigen-

schaf ten für den Einsatz als Abschlussblech im Elektroan lagenbau.

Zudem produzieren wir Magnetweicheisen in verschiedenen Güte-

klassen (RFe-Güten) gemäß DIN 17405 bzw. DIN EN 10304 mit

definierten Koerzitivfeldstärken, für den Einsatz in elektrischen

Schaltsystemen.

C.D. Wälzholz traditionally offers a wide variety of pole sheets

according to DIN EN 10265 with defined mechanical properties to

their costumers. Pole sheets are used in the plant engineering as

end cover plates.

In addition we produce soft magnetic materials in different nominal

grades (RFe-grades) according to DIN 17406 and accordingly

DIN EN 10304 with defined coercive force. Magnetic soft irons are

used in electrical circuits.

Polbleche und Magnetweicheisen – technische Sonderlösungen aus Tradition

Pole sheets and Magnetic soft iron – technically costumised product groups

10 Elektroband / Electrical steel strip

Page 11: Hello world

Lieferformen / Delivery types

Scheibenringe / Coils

Breite / Width [mm] 20 - 1.270

Ringgewicht / Coil weight [kg /mm] max. 20 kg / je mm Bandbreite / max. 20 kg / per mm strip width

Innendurchmesser / Inner diameter [mm] 508Packenringe / Oscillated wound coils

Bandbreite / Strip width [mm] 7 - 70

Ringgewichte / Coil weight [kg] max. 3.500

Wickelbreite / Coil width [mm] 250 - 550

Innendurchmesser / Inner diameter [mm] 400Tafeln / Cut to length sheets

Tafelbreite / Width of sheets [mm] 500 - 1.250

Tafellänge / Length of sheets [mm] 500 - 2.500

Ganz genau genommen – die Toleranzen

Präzision in der Fertigung ist für uns so selbstverständlich wie hohe

Qualität. Wir nutzen deshalb unsere computergesteuerten Ferti-

gungssysteme mit integrierten Regelkreisen für die automatische

Maßfindung.

Die Maßtoleranzen von Band- und Tafelmaterialien entsprechen der

EN 10106. Auch hier sind nach individuellen Kundenwünschen

Sondervarianten leicht zu realisieren.

Let’s be precise – our tolerances

It goes without saying that production precision is just as important

to us at C.D. Wälzholz as our high quality. Therefore we use

computer-controlled production systems with integrated control

circuits for automatic dimension measurement.

Dimension tolerances of strip and sheet materials correspond to

EN 10106 steel standard. Other tolerances can be easily produced

according to the individual and specific requirements of our

customers.

Toleranzen Bänder / Tolerances strips

Dicke / Thickness 1)

Nenndicke / Nominal thickness [mm] 0,20 - 0,30 0,35 0,50 0,65 1,00

Abweichung von der Nenndicke / Deviation of nominal thickness [%] +/- 8 % +/- 8 % +/- 6 % +/- 6 %[mm] +/- 0,02 +/- 0,03 +/- 0,04 +/- 0,05 +/- 0,06

Dickenabweichung über Breite (Kantenmessung 30 mm) Thicknessdeviation over stripwidth (measurement 30 mm from edge)

[mm] + 0,01 + 0,02 + 0,02 + 0,03 + 0,03

1) Sonderdicken und Sondertoleranzen auf Anfrage / Special thicknesses and special tolerances on enquiry

Breite / Width

Nennbreite / Nominal width [mm] ≤ 150 mm ≥ 150 mm / ≤ 300 mm > 300 / ≤ 600 mm > 600 / ≤ 1.000 mm > 1.000Abweichung von der Nennbreite / Deviation of nominal thickness [mm] + 0,2 + 0,3 + 0,5 + 1,0 + 1,5

- 0, - 0 - 0 - 0 - 0

Toleranzen Tafeln / Tolerances sheets

Länge / Length

Längenabweichungen für Tafelmaterial / Deviation of sheetlength [%] + 0,5 / -0 des Nennwerts (max. 6 mm) / + 0,5 / -0 of nominal value (max. 6 mm)

11Elektroband / Electrical steel strip

Page 12: Hello world

Am laufenden Band – effiziente Produktion mit Packenringen

Die Entwicklung hochwertiger Werkstoffe wird ergänzt durch

gemeinsame Optimierung der wirtschaftlichen Produktionsprozesse

unserer Kunden. Ein gutes Beispiel hierfür ist die kontinuierliche

Weiterentwicklung unserer patentierten Packenringe.

Wir haben die Lauflänge der einzelnen Bänder von 1.000 auf bis zu

30.000 m erhöht. Die Möglichkeit, die Bänder außerdem durch

moderne Schweißtechnik zu verbinden und rechnergesteuert oszil-

lierend aufzuhaspeln, machen diese Ringaufmachungen zu einem

Turbo für die Produktion unserer Kunden. Bis zu 30fach verlängerte

Laufzeiten minimieren personalintensive Rüstzeiten sowie unrenta-

ble Maschinenstillstandzeiten.

Die Vorteile unserer Elektroband-Packenringe:

» Bandbreiten bis zu 70 mm

» Verlängerung der Lauflänge bis zum 30fachen

» Individuelle Verlegebreiten zwischen 250 und 550 mm

» Jumbo-Coils bis zu 3.500 kg

Long strip running – efficient production with oscillated wound coils

One of our main objectives at C.D. Wälzholz is the development of

high-quality materials. However, we also aim at enhancing the

efficiency of our customers’ production processes. A good example

is the continuous further development of our patented oscillated

wound coils.

We have managed to increase the length of the individual steel

strips from 1,000 to 30,000 metres. Moreover, steel strips can now

be joined by means of modern welding technology. These processes

as well as our computer-controlled oscillating winding procedure

increase the efficiency of our customers’ production enormously.

Operating times are 30 times longer now which means that labour-

intensive set-up times and unprofitable shutdown times are

minimized.

The advantages of our oscillated wound electrical steel coils are:

» Strip widths of up to 70 mm

» Operating times 30 times longer

» Individual coil widths of 250 mm - 550 mm

» Jumbo coils with a weight of up to 3,500 kg

12 Elektroband / Electrical steel strip

Page 13: Hello world

Schützenswert – Sicher von der Produktion bis zum Kunden

Damit das Elektroband in einwandfreiem Zustand unsere Kunden

erreicht, stellen wir auch bei Verpackung, Lagerung und Transport

höchste Anforderungen an die Qualität. Jede unserer Verpackungen

wird individuell auf ihre speziellen Transportbedingungen abgestimmt.

Neben Transportmittel, Wetterbedingungen und Dauer des Trans-

portes berücksichtigen wir auch hier die besonderen Wünsche

unserer Kunden. Qualifizierte Mitarbeiter stellen sicher, dass durch

den Einsatz modernste Verpackungsanlagen im Zusammenspiel mit

unterschiedlichsten Verpackungsmaterialien optimale Systeme zum

Schutz unserer hochwertigen Elektrobandwerkstoffe entstehen.

Und auch hier spielt der verantwortungsvolle Umgang mit Ressour-

cen und der Schutz der Umwelt eine wichtige Rolle. Daher verwen-

den wir in Abstimmung mit unseren Kunden nur so viel Verpa-

ckungsmaterial wie unbedingt notwendig ist.

Vielseitige, speziell für CDW gefertigte Paletten nach IPPC-Standard

stehen für Palettenverpackungen zur Verfügung, und bieten hin-

sichtlich Belastbarkeit und Größe die perfekte Basis für liegende

oder stehende Coils sowie Tafelmaterial.

Je nach Bedarf werden unsere Produkte mit Papier oder Folie, bei

besonders hohen Anforderungen an den Korrosionsschutz mit VCI-

Papier ummantelt. Vor mechanischen Einwirkungen schützen wir

unser Elektroband mit Kantenschutzblechen und Hartfaserronden.

Die so optimal geschützten Elektrobandwerkstoffe werden unmittel-

bar nach dem Verpackungsprozess in unseren vollautomatischen,

EDV-gesteuerten Flächen- oder Hochregallagern zum weiteren

Transport an Ihren Bestimmungsort bereitgestellt.

Ausgewählte Logistikpartner sorgen dafür, dass das Material zuver-

lässig und im einwandfreien Zustand unsere Kunden erreicht.

Selbstverständlich sind wir AEO-zertifiziert und damit ein sicherer

Teilnehmer in der internationalen Transportkette.

Deserving protection – Safe all the way from production to arrival at the customers’

In order to make sure that the electrical steel strip reaches our

customers in an immaculate condition we guarantee the highest

quality as regards packaging, storage and transport as well.

Packaging is arranged to suit our customers’ requests as well as to

meet the individual requirements of different means of trans-

portation itinerary and journey time. A wide range of packing

materials, automatic packaging equipment and our qualified staff

ensure that packing will always meet all the requirements. In order

to protect the environment we only use as much packaging material

as is really necessary.

We supply electrical steel strip as sheets and as coils with ver tical

and horizontal winding axis. We can select from a large number of

pallets with IPPC standard especially manufactured for

C.D. Wälzholz. Thus the ideal ground packaging as to toughness,

size and coilage can be chosen.

Depending on the respective requirements our material is covered

with paper and/or foil. In case of stricter requirements as to

corrosion protection we use VCI paper. Our electrical steel strip is

protected against mechanical influences by means of edge

protection sheets and hard fibre material.

The material we produce will always remain in immaculate

condition due to a well coordinated computer-assisted storage

system. Immediately after packaging the material is stored in our

area storage or fully automated high-bay storage system.

Distinguished logistics partners as well as safe cargo tie-down pro-

cedures ensure that the material reaches our customers in imma -

c u late condition. As a matter of course we are certified according to

AEO, and are therefore a safe participant in the international

transport chain.

13Elektroband / Electrical steel strip

Page 14: Hello world

Umrechnungstabelle Conversion table

GrößeSize

EinheitUnit

UmrechnungsfaktorConversion factor

in nach / to

Magnetische Polarisation J Magnetic polarization J

T = Wb/m² = Vs/m2 Wb/cm² = Vs/cm2 10-4

T G 104

T lines/square inch 6,45 x 104

Vs/cm2 T 104

G T 10-4

lines/square inch T 1,55 x 10-5

Magnetische Feldstärke HMagnetic field intensity H

A/m A/cm 0,01

A/m 0e 0,0126

A/m Ampere-turns/inch 0,0254

A/cm A/m 100

0e A/m 79,6

Ampere-turns/inch A/m 39,4

Watt-VerlustCore loss

W/kg W/lb 0,454

W/lb W/kg 2,2046

W/kg (50 Hz) W/kg (60 Hz) 1,266

W/kg (60 Hz) W/kg (50 Hz) 0,79

W/kg (50 Hz) W/lb (60 Hz) 0,574

W/lb (60Hz) W/kg (50 Hz) 1,737

Zugfestigkeit σTensile strength σ

N/mm² kp/mm2 0,102

N/mm² psi 145

kp/mm² N/mm2 9,81

psi N/mm2 6,90 x 10-3

Kraft FForce F

N = kgm/s2 kp 0,102

Force F N = kgm/s2 9,81

Gewicht mWeight m

g ounce 0,0353

kg pound 2,2046

ounce g 28,4

pound kg 0,454

Länge LLength L

mm inch 0,0394

inch mm 25,4

Fläche AArea A

cm2 square inch 0,155

square inch cm2 6,45

Volumen VVolume V

cm3 cubic inch 0,061

cubic inch cm3 16,387

Temperatur TTemperature T

°C °F 1,8 + 32

°F °C 0,556 - 17,8

14 Elektroband / Electrical steel strip

Page 15: Hello world

C.D. Wälzholz – in der Welt zu Hause

Ebenso vielfältig wie der Werkstoff Stahl ist die Unternehmens-

gruppe C.D. Wälzholz. Als traditionsreiches und fortschrittliches

deutsches Kaltwalzwerk verfügen wir heute über weltweite Tochter-

unternehmen und Vertretungen. So können wir unseren internatio-

nal produzierenden Kunden Elektroband in nahezu jeder Werkstoff-

ausführung anbieten. Überall.

Zufriedene Kunden, höchste Qualität sowie ein verantwortungs-

voller Umgang mit der Umwelt sind dabei unser Ziel. Immer.

C.D. Wälzholz – at home everywhere in the world

You know that steel is an extremely versatile material. But bear in

mind that the C.D. Wälzholz Group of Companies is just as versatile

itself. On the one hand we are a well-established German cold

rolling mill with a long tradition. But having said that, C.D. Wälzholz

is also a very modern company with subsidiaries and agencies all

over the world. Therefore we are in a position to offer our

international customers electrical steel strip in virtually any type

and grade required – everywhere in the world.

C.D. Wälzholz attaches great importance to environmentally friendly

production, and we always aim at achieving the highest possible

quality. Our main goal, however, has always been and will always

be to have fully satisfied customers.

15Elektroband / Electrical steel strip

Page 16: Hello world

Bandstahl

Bandstahl vergütet

Elektroband

Kaltband

Bonderband

Schmalband

Profile

C.D. Wälzholz KGFeldmühlenstr. 55 58093 HagenDeutschland/Germany

Fon/Phone: +49 (0) 23 31- 9 64 - 0Fax: +49 (0) 23 31- 9 64 - 21 00Internet: www.cdw.deE-Mail: [email protected]

Standorte: Hagen, Hohenlimburg, Plettenberg, Oberkochen, Iserlohn/Deutschland . Götzis/Österreich Thiers/Frankreich . São Paulo/Brasilien . Cleveland, Ohio/USA . Taicang/ChinaLocations: Hagen, Hohenlimburg, Plettenberg, Oberkochen, Iserlohn/Germany . Götzis/Austria Thiers/France . São Paulo/Brazil . Cleveland, Ohio/USA . Taicang/China

Cold rolled high carbon steel strip

Hardened and tempered steel strip

Electrical steel strip

Cold rolled low carbon steel strip

Bonderized steel strip

Narrow steel strip

Profiles

Rem

ind

Adve

rtis

ing

05/1

2