heck list multipanel · handle with stainless steel inlay (dimension min. 300mm, with coupling min....
TRANSCRIPT
Product management 1 Revision G / 28.11.2017
Check list multiPANEL Customer:
Contact partner:
Phone:
Email address:
Surface coating: Powder coating RAL 9005 deep black matt, fine structure
Front plate: 3mm, silver anodised / silver metallic, Powder coating
Lock and hinge: RAL 9005 deep black matt, fine structure
Decorative inlay surface: Stainless steel inlay V2A
Ingress protection: IP65 / En 60529
Temperature range: -20°C bis +60°C
External dimension max.: 800 x 800mm
External dimension min.: 150 x 150mm
Standard execution
Product management 2 Revision G / 28.11.2017
MPD (multiPANEL-Display with permanently connected front plate)
Alu-Front plate Applicable for glass
Visible front
**Usable area
MPK (multiPANEL-Kommando inset Front plate from the front, rear and direct)
Visible front
**Usable area
Direct installation from panel PC‘s
Alu-Front plate inset from the front
Alu-Front plate inset from the rear
Enclosure HxW: ___________________mm Front plate HxW: _________________mm
Enclosure-/Front plate dimensions H x W
Dimension by installed equipment
Product management 3 Revision G / 28.11.2017
HMI Panel
Others:________________________ Typ:__________________________
_
Rear wall variants
Bolted flush rear wall
Mounting depth 64mm
Bolted door
*(Screws + Hinges)
Mounting depth 64mm
Framed door 15mm
*(Turnbuckle+ Hinges)
Mounting depth 77mm
Framed door 60mm
*(Turnbuckle+ Hinges)
Mounting depth 127mm
*Turnbuckle+Hinges, Side H
Note: If using the version MPK with front plate inset from the rear;
mounting depth is reduced about 8mm.
Circulation of air distance consider?
Further installed eqipment, e.g. switch, push botton and so on.
Product management 4 Revision G / 28.11.2017
Horizontal installation
Mounting on suspension system profiPLUS
Upright version ** Hanging Version **
* Mounting only on bolted flush rear wall
Desk coupling *
** Mounting only on 70mm front profile
Others / Accessories
Handle with stainless steel inlay (Dimension min. 300mm, with coupling min. 625mm)
Emblem by stainless steel inlay
Special colour inkl. rear wall RAL-Classic: _________________________
Special colour front plate RAL-Classic: __________________________
Screen printing
Profile handle
*Keyboard tray Rigid (15° grade) Swiveling, stageless Mouse tray
(*Enclosure amplitude min. 334mm)
*Keyboard tray shortened (380mm) for keyboards with a trackball
Digital printing Emblem by front plate
VESA 75 *
VESA 100 *
Down (only without panel coupling) on both sides
*Wall joint
*Socket joint
A
A
*Not for over-head assembling
A
Signal light adaption
Support profile 1 B
250mm
500mm
750mm
1000mm
1500mm
Intermediate joint
Support profile 2 D
250mm
500mm
750mm
1000mm
1500mm
Please note: Maximum system lenght 2m
___________mm ___________mm
C Elbow
Signal light adaption
E
B C D
E
*Socket joint smart
*Wall joint smart
A
A
Socket joint profile
adjustment smart
Wall joint profile
adjustment smart
Universal socket joint
adjustment smart
Universal wall joint
adjustment smart
Product management 5 Revision G / 28.11.2017
Vertical installation
Support profil 1 B
Signal light adaption D
250mm
500mm
750mm
1000mm
1500mm
Support profil 2 C
250mm
500mm
Elbow
___________mm
___________mm
A
F
D E
**Wall joint, vertical **Socket joint, vertical **Base
**It‘s not allowed with intermediate joint!
B
C
Elbow
D
Support profil 3 F
250mm
500mm
750mm
1000mm
___________mm
E
Signal light adaption E
A A A
Needle bearing, optional
*Panel coupling Elbow panel coupling *Panel coupling N
hanging upright hanging upright hanging upright
G
Elbow panel coupling N
hanging upright
Enclosure couplings G /F
F
L = 250mm
L = 500mm
L =750mm
L = 1000mm
L = _________mm
*Profile lenght F Elbow desk coupling N
hanging upright
*Desk coupling N
hanging upright
VESA Adapter