heavy-duty drum trucks for 200/220l drums · drum handling equipment 60 manipulate drum from the...

Drum Handling Equipment

58

DTFBSRIndustrialUse on multi surfaces.Wheels: 250mm pneumatic.100mm nylon jockey.Capacity: 320kg.

DTWHBBIndustrial & YardFor smooth surfaces.Wheels: 250mm SolidRubber-tyredCapacity: 320kg.

Drum Dollies

DTZ80Rough TerrainNegotiate gravel surfaces,floor grates etc.Wheels: 400mm pneumatic.100mm nylon jockey.Capacity: 380kg.

DRUM TRUCKS

MODEL SUITABLE FOR WHEELS CAPACITY

DTZ80 Rough Terrain Steel-cntrd 400mm pneum. 380kg

DTFBSR Industrial Steel-cntrd 250mm pneum. 320kg

DTWHBB Industrial & Yard Steel cntrd 250mm solid rubber 320kg

DTBWBB Drum Cradle 200mm plastic-cntrd pneum. 320kg

Strong steel construction,Zinc Plated protection.

Heavy sliding catch engages overdrum lip. Wheel choices (as pictured).100mm nylon jockey wheels allowmaximum stability when drums are

loaded or unloaded .

DTBWBBDrum CradleChain secures drum.Fixed stand to lay

horizontally. Wheels:400mm pneumatic.Capacity: 320kg.

Heavy-Duty Drum Trucks for 200/220L Drums

PLASTIC DRUM ATTACHMENTIS OPTIONAL ON ALL MODELS

DR64 TRIANGULAR

CASTORS: 75mm nyl. swivel

CAPACITY: 300kg

SIZE: 500m

DDSQ SQUARE


CAPACITY: 400kg

SIZE: 600mm x 600mm

DD66 SQUARE


CAPACITY: 400kg

SIZE 600mm x 600mm

HEIGHT: 125mm

DDSQSquareProvides full mobility of drumsthroughout the factory.

Heavy steel angle construction.

For 200L steel drums.

DR64 – TriangularHeavy steel flat bar construction.

For 200L steel drums.

Castors: 75mm nylon swivel.

Capacity: 300kg

DTCCombinationDrum TruckDesigned for handling low weight orlow volume 60 or 200L steel drums.

Strong steel construction, zinc platedor painted finish.

Sliding catch secures drum.

Also use as a General Purpose HandTruck.

Wheels: 300 x 4 pneumatic or

250mm solid rubber

Lip size: 380mmW x 230mmD

DTC/TPlastic Drum Tie-downA strong webbing and ratchet tie-down,as pictured, is available as an optionalextra for securing plastic drums to theDrum-truck.

DTC DRUM TRUCK

HEIGHT: 1200mm

CAPACITY: 250kg

LIP SIZE: 250mm x 360mm

SPECIALS CAN BE MADE TO SUIT CUSTOMERS’ UNIQUE REQUIREMENTS

DR66 SquareGeneral purpose. Welded angle steelwith 18mm customwood deck.


See our

SpecialPurposeHand-trucks

on pages53–57


59

Our Drum Handling Equipment is designed to provide safe and

efficient handling of very heavy and awkward drums of all types.

They’re constructed from quality steel and are very strong and

robust. Drum cradles are zinc-plated for long-life protection.

Drum Tipping Cradles

DC1 – Drum CradleIdeal for 200L steel drums. Telescopic handleswith sliding catches which engage the drum lip.Rock back onto wheels to tilt drum horizontiallyto transport or decant (as pictured above).

DC4 Drum CradleFor 200L steel drums or 220L plastic drums.Position flat-bar lip under lower lip of drum andpull back to tilt horizontally to transport or decant.Fit attachment DC4R (right) to freely rotate drums(steel only) when resting horizontially.

DC4RDrum Revolving

Attachment

SB200 Spill Bin PalletDesigned to protect work areas from leaking drums.Fits four 220L drums. Pallet will hold 220 litres of spillage.

J20Jerry-can Tipping FrameA variety of sizes available to fitdifferent canisters

TE200 Tip Ezee FrameIdeal for decanting 200L drums.Wheels are optional. Frames forother sized drums also available.

Zinc-plated or Painted finish

Capacity: 250kgLength: 1120mm

DU Drum Upender

FOR DRUM TAPS SEE PAGE 62 – 63

DC1 DRUM CRADLE

SIZE: 930mm Long (handles in)Add 560mm with handles out500mmW x 510mmH

WHEELS: 100mm white nylon

DC4 DRUM CRADLE

SIZE: 900mmL (including lip) 550mmW x 480mmH

WHEELS: 100mm white nylon

DC4R DRUM REVOLVING ATTACHMENT

SIZE: 590mmL x 480mmW

WHEELS: 75mm black nylon


See our

ForkliftAttachments

Page 60


60

Manipulate Drum from the Forklift. Suitable for standard steel 205litre drums, also Mauser L ring drums, and some plastic drums.

Capacity: 680kg. Maximum fork section: 200mm x 50mm.

Forklift Attachments slip-on type

FLB150Forklift Drum Carrier

ADG 1Drum Grab

Drum GripsDG360A Single. DG360B DoubleAutomatic parrot beak grip. Suitable for standard steel60/205 litre drums, also Mauser L-ring drums, CHH plasticdrums and Fibreboard drums.

Capacity: 680kg. Maximum fork section: 180 x 65mm.

DWS Drum Webbing SlingFor 60L & 200/220L steel drums and anumber of plastic drums.Ratchet secures drum

DL70 Drum LifterAttach to 200 litre drums and use lifting hook.

DLS Drum Lifting SlingLift drums vertically, horizontally, or angled todischarge contents. Use with a forklift truck oroverhead hoist.

General Drum Handling

DLCDrum Lifting Clamp

ELEPHANT – Lift drums vertically,horizontally or invert and dump

contents. Self locking jaws. Use withoverhead hoist. Capacity: 1000kg

DT Drum TongsLift drums horizontally using overhead hoist.Semi-automatic.

Lift Drums easily and efficiently with a forklift truck.

Heavy welded steel construction.

Suitable for standard steel 205L drums.Double Drum (ADG 2) also available.

Max fork section: 200mm x 50mm.


DTUDrum Tilting Unit

Two models – standard (right) foruse with an overhead hoist, and

with forklift pockets (above).Drums rotate freely on axis.

Optional locking device available.Ratchet secures drum.

61

Drum-lifting Trucks

M14Air Drive Motor

M02Mixing Blade

5-blade, Stainless Steel

M07Air Motor StandGalvanised

M16CouplerStainless Steel

Usual requirements200L DRUM – BUNG ENTRY (2”BSP).M02 Mixer M16 CouplerM07 Air Motor StandM14 Air Drive Motor (300 - 3000rpm)

60L DRUM – BUNG ENTRY (2”BSP).M19 Mixer M24 Coupler M07 Air Motor Stand

ELECTRIC DRILL OPERATIONVariable speed drill – 1/2” chuck or larger.M02 Mixer – 200L drums M19 Mixer – 60L drums

Drum Mixing Equipment• Specially designed for bung-holeentry-mixing in 60 – 200 litre drums.

• Mixing Blades are lightweight andportable for quick, efficient mixing.

• Simple set-up with only a fewminutes’ instruction.

• Mixers may be driven with a 1/2”electric drill or explosion-proof airdrive motor (above).

• Thick or cold fluids may be thinnedby heating for quicker mixing &dispensing.

DHB/T Drum Heater (200/220L steel drums only)

For heating, melting and thawing non-volatile liquids, solids and viscous materialssuch as greases, fats, gelatine, tar and heavy oil. Heater is non-flameproof foroperation on 230 volt AC mains. Maximum 2000W with thermostat control (suppliedwithout input lead). Standard temperature range 30º–110º, special 0º–40º.

HDT25BHydraulicDrum TruckSTRADDLE LEG

• Reliable hydraulic pump

• Claw grabs drum lip for lifting

• 2 large roller wheels with easysteering rear braked castor

Lifting height: 345mm

Capacity: 650kg

MK80MobileDrum Carrier• Lift and tilt to decant afull drum

• Tighten chain lever tosecure drum in collar

• 2 large roller wheels witheasy steering rear castor

Capacity: 650kg

A = 1200mm

B = 1700mm

C = 1520mm

D = 970mm

E = 1320mm

DLR Drum Lifter/RotatorFREESTANDING. NYLON WHEELS

The Drum Lifter/Rotator enables one person to lift 250kg drums to aheight of 1.5 meters. Transort, rotate and decant unassisted.

The modified Pallet Truck hydraulics gives the operator finger-tip controlof light or heavy loads. Wheels are 200mm nylon, polyurethane or iron.

For a gearbox operated fork truck or overhead hoist mounted unitplease contact our sales engineers.



62

TQ09 Piston pumpPolypropylene construction withPTFE coated nitrile seal andalkathene polymer valvecomponents. Pumps about 250mlper stroke.

TQ05 Siphon pumpPolyethylene construction.Siphons liquids from higher tolower levels. Pumping thebellows primes the pump andbegins siphon action. Simplyloosen vent cap to stop thesiphon flow. Pump bellows todispense fluids to a higher level.Siphons up to 20 litres perminute, handles light oils,kerosene and various types oflight solvents.

Hand Pumps SUITABLE FOR BOATS, CARAVANS, MOTOR HOMES ETC.

ClassicBrass Pump• 10 strokes per litre

UltraPantryPump

SigmaDouble-action Pump

RockerGalley Pump• Fresh or salt water

• 13 strokes per litre

• Quality plasticpump

• Vertical plungeraction

• Cast-iron K model

• Suitable for clearand light fluids – water,petrol, diesel etc

Bung Spanner

DiaphragmHand Pump• Self-priming

Drum Taps and PumpsA variety of pump options designed for use with 2 inch

outlet on 205 & 60L standard steel drums.

IMPORTANT: Advise specific chemical applications to

ensure correct usage. Always wear protective clothing

and eye protection when dispensing chemicals. Don’t

mix applications; ie. one pump per fluid type.

DHS 450mmFor removing bungs fromsteel or plastic drums. Fitsmost types of drum closure.

TQ14 Rotary pumpCast alloy body with steelinlet/outlet tubing and heavy-dutyhandle. Delivers up to18 litres perminute. Transfer fluids in bothdirections. Ideal for transferringpetrol, diesel fuels, heavy oil,machine oil, low viscosity oils andnon-corrosive liquids. Includes 2.2mfarm tank grade anti-static hose.

TQ01 Lever pumpGeneral purpose, steel constructionwith three alternative ‘O’ rings and

chemical compatibility chart.Telescopic suction tube. Comes with1.8m outlet hose (petrol resistant).

Suitable for a wide variety ofchemicals and solvents. Convenient

bung opener cast on pump head.Pumps approx. 250ml per stroke, and

handles liquids to SAE90.



63

TP01 PolyethyleneFlo-king. lever action 2” NPS

KEY: BSP – British Standard Pipe Thread.

NPS – US National Pipe (straight) Thread.

HDPE – High Density Polyethylene.

LLDPE – Linear Low Density Polyethylene.

TP08 PolyethyleneLLDPE – Lever action. 3/4” BSP

TP14 PolyethyleneHDPE – Front lever action. 3/4” BSP

TP09 PolyethyleneHDPE – Screw action. 3/4” BSP

TP03 PolyethyleneHDPE – drum-major.Vertical discharge 2” BSP

TP03AHDPE – drum-major.Straight through 2” BSP

Cutter adapter available to broachdrum bung liner.

TP04 Ball valveNickel plated, brass body,chrome plated ball, Teflon seals.Male/Female, 3/4” BSP

TP18 Brass SPRING LOADED.Self-closing, Teflon seal. Fire baffle3/4” BSP

Special Purpose Taps

TP15/58 PolyethyleneLLDPE. Aeroflow with 58mm cap forPlastic Industry and Rheem containers.

TP15/70LLDPE. Aeroflow with 70mm cap forCarter Holt Harvey containers.

TP22 StainlessBall Valve (316)3 Piece. Teflon seal F-F 2” BSP.Serviceable in-situ

TP21 – 2 Piece. Teflon seal

F-F 2” BSP. Seal serviceable

TP20 – 1 Piece. Teflon sealF-F 2” BSP. (1” through body).Non-serviceable

TP22 with optionalnipple and elbow

3/4” Drum Taps

2” Drum Taps

Drum Adaptors – Polyethylene (HDPE) Bung Reducers – (HDPE)

TPB01 2” BSP external / 3/4” BSP internal

TPB02 2” Mauser external / 3/4” BSP internal

TPB03 2” Van Leer external / 3/4” BSP internal

TPB04 2” Rieke external / 3/4” BSP internal

TPA03 TPA01TPA06 TPA02TPA04

TPB01 TPB02 TPB03 TPB04

TP02Treacle TapMolasses GateGunmetal, 2” BSP

TP02STreacle TapMolasses Gate

Brass, spring loaded,Teflon seal, 2” BSP

TPA01 2” Mauser external / 2” BSP internal short

TPA04 2” Mauser external / 2” BSP internal long

TPA02 2” Rieke external / 2” BSP internal

TPA03 2” Van Leer external / 2” BSP internal

TPA06 NW50 internal / 2” BSP internal


heavy-duty drum trucks for 200/220l drums · drum handling equipment 60 manipulate drum from the...

Documents