heating manifold water manifold - sbk-neuenstein.de · available as modular system or completely...

List 2020/1a

Form

181

The flexible distribution manifold systems made of plastic for sanitary and heating

Heating manifoldWater manifold

Siegfried Böhnisch Kunststofftechnik GmbHMaybachstraße 1 D-74632 NeuensteinTel:+49 (0)7942-944 926 0 Fax:+49 (0)7942-944 926 [email protected] www.sbk-neuenstein.de

Index Page

Variation possibilities 3

Parts list for modular system / self installation 4

Heating manifold

Heating manifold 2000 5

Heating manifold 3000 6

Multizone 3000 and Differential pressure relief valve 7

Accessories for heating manifold 3000 9Actuator Room thermostat

Accessories for heating manifold 3000/2000 10Spare parts for heating manifold 3000Identification plate, plug, air vent, thermometer, o-ring Ball valve SpacerInstallation kit for one pipe manifold Wall holder

Manifold cabinets 12In-wall mountingCabinet holder

TwinCo 3000 manifold station 13

Water manifold

Water manifold 4001 1¼”x1” 14

Renovation Professional

Heating manifold 3000 17_______________________________________________________________

Alphabetical index 18

Terms of sale, delivery and payment 19


Please take technical data, installation dimensions and regulations from our technical documentation.You get this directly ex works or on www.sbk-neuenstein.de

Siegfried BöhnischKunststofftechnik GmbH

Maybachstraße 1D-74632 Neuenstein

Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

List 2020/1a

[email protected]

Heating manifold 3000Two-way connectionSupply module on the leftReturn module on the right

Heating manifold 3000Circuit up and downin the same manifold possible

Series 3000 / 2000 combinedwith separation plate betweenfloor and radiator circuit

Series 3000 / 2000 combined

Heating manifold 3000 as one pipe manifoldSupply module on the leftReturn module on the rightSeparation plate between supply and return module(installation kit for one pipe manifold)

Installation informationHeating manifold 3000 / 2000O-ring always at the top

Variation possibilities of manifold systems

Water manifold 4001as renovation manifoldConnection on the right

Two circuits up,one circuit down

Spacers between the circuitsfor an exact adaptation to an existing installation

Water manifold 4001with water drain and installation clampConnection on the left

Three circuits up,one circuit down

Completely assembled for a simple and quick installation




Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a


Part

s lis

t fo

r m

od

ula

r sy

ste

m / s

elf

in

sta

llati

on

Sin

gle

mo

du

le

even

t. a

s K

FR

Co

nn

ecti

ng

set

Th

read

ed

bar

M8x1000

Co

nn

ecti

on

blo

ck

En

d p

late

Nu

ts M

8P

ipe c

lam

p

so

un

d a

bso

rbed

Iden

tifi

cati

on

pla

te

2 c

ircu

its

21

11

12

22

3 c

ircu

its

31

11

12

23

4 c

ircu

its

41

11

12

24

5 c

ircu

its

51

21

12

25

6 c

ircu

its

61

21

12

26

7 c

ircu

its

71

21

12

27

8 c

ircu

its

81

21

12

28

9 c

ircu

its

91

21

12

29

Alt

ern

ati

ve t

o c

on

necti

ng

set

Heati

ng

man

ifo

ld 2

000 / 3

000

Wate

r m

an

ifo

ld 4

001 1

¼”

x 1

”

Connect

ing s

et in

cludes

2 c

onnect

ion b

lock

s, 2

end p

late

s, 4

nuts

M8 g

alv

aniz

ed, 1 s

et univ

ers

al h

old

er

an

d d

ep

en

din

g o

n t

he v

ers

ion

Manual a

ir v

ent, p

lug, fil

l and d

rain

valv

e, th

erm

om

ete

r, b

all

valv

e, id

entif

icatio

n p

late

.It

is r

eco

mm

en

ded

to

use a

n a

dd

itio

nal h

old

er

for

man

ifo

lds w

ith

10 a

nd

mo

re c

ircu

its.

Su

pp

ly m

od

ule

Re

turn

mo

du

leC

on

ne

cti

ng

se

tT

hre

ad

ed

ba

r

M8

x1

00

0

Co

nn

ec

tio

n b

loc

kE

nd

pla

teN

uts

M8

Un

ive

rsa

l w

all

ho

lde

r s

et

2 c

irc

uit

s2

21

12

24

1

3 c

irc

uit

s3

31

12

24

1

4 c

irc

uit

s4

41

12

24

1

5 c

irc

uit

s5

51

22

24

1

6 c

irc

uit

s6

61

22

24

1

7 c

irc

uit

s7

71

22

24

1

8 c

irc

uit

s8

81

22

24

1

9 c

irc

uit

s9

91

42

24

1

10

cir

cu

its

10

10

14

22

41

11

cir

cu

its

1111

14

22

41

12

cir

cu

its

12

12

14

22

41

13

cir

cu

its

13

13

14

22

41

14

cir

cu

its

14

14

14

22

41

15

cir

cu

its

15

15

14

22

41

16

cir

cu

its

16

16

14

22

41

Alt

ern

ati

ve

to

co

nn

ec

tin

g s

et

Connect

ing s

et in

cludes

1 c

onnect

ion b

lock

, 1 e

nd p

late

, 2 n

uts

M8 g

alv

aniz

ed, 2 p

ipe c

lam

ps,

5 id

entif

icatio

n p

late

s.It

is r

eco

mm

en

ded

to

use a

n a

dd

itio

nal p

ipe c

lam

p f

or

man

ifo

lds w

ith

10 a

nd

mo

re c

ircu

its.



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

The individual modules are made of fibreglass reinforced and heat and cold resistant plastic for operating temperatures from -20° to +90°C with integrated air chambers for thermal insulation in the colours red or blue.Connection block with 1½” external thread and 1” internal thread and with an additional ½” hole for air vent. Service connection right or left possible, circuit screw connections ¾” external thread euro-cone for plastic, copper/soft steel or multi-layered compound pipes.Available as modular system or completely assembled and leak tested manifold.

Heating manifold 2000

Single modules with o-ring gasket, leak tested

Heating manifold 2000, single modules

Type Unit Item no.Supply module 2000, red 1 pcs 6.013.038with o-ring gasket

Return module 2000, blue 1 pcs 6.013.039with o-ring gasket

Connection block 2000 and end plateType Unit Item no.Connection block 2000 made of brass 1 pcs 6.013.022with o-ring gasket, 1 ½” external and 1” internal threadwith ½” hole for air vent

Connection block 3000 /90deg made of brass 1 pcs 6.013.053.050with o-ring gasket, 1 ½” external threadwith 3 x ½” hole for air vent, fill and drain valve, thermometer

End plate made of steel 1 pcs 6.013.004.002with plastic hood for corrosion protection

Threaded bars and nutsType Unit Item no.Threaded bar M8 x 1000 galvanized 1 pcs 6.013.005.017for manifolds up to 17 circuits

Nuts M8 galvanized 100 pcs 6.013.006

Connecting set for heating manifold 2000Type Unit Item no.Connecting set 1 1 pcs 6.013.003.010includes 2 connection blocks 2000, 2 end plates,4 nuts M8, 1 set universal holder

Delivery without: Wall / Cabinet holder, air vent, clamp screw connections, ball valve, identification plates

Heating manifold 2000, completely assembled manifold

Type Length (mm) Unit Item no.HKV 2000 02 circuits 180 1 pcs 6.013.037.020HKV 2000 03 circuits 235 1 pcs 6.013.037.030HKV 2000 04 circuits 290 1 pcs 6.013.037.040HKV 2000 05 circuits 345 1 pcs 6.013.037.050HKV 2000 06 circuits 400 1 pcs 6.013.037.060HKV 2000 07 circuits 455 1 pcs 6.013.037.070HKV 2000 08 circuits 510 1 pcs 6.013.037.080HKV 2000 09 circuits 565 1 pcs 6.013.037.090HKV 2000 10 circuits 620 1 pcs 6.013.037.100HKV 2000 11 circuits 675 1 pcs 6.013.037.110HKV 2000 12 circuits 730 1 pcs 6.013.037.120

Extra charge per further circuit

NEW: Now also available with connection block 3000 /90 degrees (please specify when ordering)


Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

The individual modules are made of fibreglass reinforced and heat and cold resistant plastic for operating temperatures from -20° to +90°C with integrated air chambers for thermal insulation in the colours red or blue.Supply module with integrated shut-off, change over to actuator possible.Return module with integrated, adjustable flowmeter, lead-sealable cap.Connection block with 1½” exernal thread and 1” internal thread and with four additional ½” holes for air vent, fill and drain valve, thermometer. Service connection right or left possible.Circuit screw connections ¾” external thread euro-cone for plastic, copper/soft steel or multi-layered compound pipes.Available as modular system or completely assembled and leak tested manifold.

Heating manifold 3000 with flowmeter

Single module with shut-off, manual regulation, o-ring gasket, leak tested

Heating manifold 3000, supply module, red

Type Unit Item no.Supply module 3000, red 1 pcs 6.013.051with o-ring gasket

Single module with flowmeter, lead-sealable cap, o-ring gasket, leak tested

Heating manifold 3000, return module, blue

Type Unit Item no.Return module 3000, blue, indicator pin blue 1 pcs 6.013.058Indicating range 0,17 - 2,4 l/min => 10 - 145 l/hwith o-ring gasket

Return module 3000, blue, indicator pin green 1 pcs 6.013.057Indicating range 0,5 - 3,0 l/min => 30 - 177 l/hwith o-ring gasket

Return module 3000, blue, indicator pin red 1 pcs 6.013.054Indicating range 1,0 - 4,2 l/min => 60 - 250 l/hwith o-ring gasket

Return module 3000, blue, indicator pin yellow 1 pcs 6.013.096Indicating range 1,7 - 7,8 l/min => 100 - 465 l/hwith o-ring gasket

Connection block 3000 and end plateType Unit Item no.Connection block 3000 made of brass 1 pcs 6.013.053with o-ring gasket, 1 ½” external and 1” internal threadwith 4 x ½” hole for air vent, fill and drain valve, thermometer

Connection block 3000 /90deg made of brass 1 pcs 6.013.053.050with o-ring gasket, 1 ½” external threadwith 3 x ½” hole for air vent, fill and drain valve, thermometer

End plate made of steel 1 pcs 6.013.004.002with plastic hood for corrosion protection

Threaded bars and nutsType Unit Item no.Threaded bar M8 x 1000 galvanized 1 pcs 6.013.005.017for manifolds up to 17 circuits



Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!

Connecting sets for heating manifold 3000Type Unit Item no.Connecting set 2 1 pcs 6.013.003.020includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set universal holder (without installation kit)

Connecting set 3 1 pcs 6.013.003.030includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set universal holder (without installation kit),2 manual air vents ½”, 4 plugs ½”, 2 fill and drain valves ½”

Connecting set 4 1 pcs 6.013.003.040includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set universal holder (without installation kit),2 manual air vents ½”, 2 plugs ½”, 2 fill and drain valves ½”,2 ball valves 1½” union nut x 1” internal thread, 2 thermometers, 20 identification plates



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a


Installation kit for 2 or 3 circuits

Multizone 3000 installation kit

Type Unit Item no.

Installation kit double zone 1 pcs 6.013.100.120zone valve + end module

Installation kit triple zone 1 pcs 6.013.100.130zone valve + intermediate module + end module

The SBK-Multizone 3000 combines up to 3 heating circuits to one control zone. The zone function is based on three different modules.

Multizone 3000 single modules

Type Unit Item no.

Zone valve 3000, red 1 pcs 6.013.051.004with o-ring gasket

Intermediate module 3000, red 1 pcs 6.013.051.005with o-ring gasket

End module 3000, red 1 pcs 6.013.051.006with o-ring gasket

Substitute o-ring gasket (10 pcs) 1 set 6.013.059.210Special o-ring with cross piece, only suitable for Multizone 3000

Water flowthrough the

different modules



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!

[email protected]

List 2020/1a

Differential pressure relief valve for heating manifold 3000

Type Unit Item no.

SBK Differential pressure relief valve 1 pcs 6.013.180includes Bypass-tube and clamb screw connections

SBK Differential pressure relief valve - Set 1 pcs 6.013.180.001Differential pressure relief valve mounted in a Return moduleincludes Supply module with manual regulation,Bypass-tube and clamb screw connections

Connecting sets with cabinet-/ wall holder 95 mm highType Unit Item no.Connecting set 2 1 pcs 6.013.003.025includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set cabinet-/ wall holder 95 mm high (without installation kit)

Connecting set 3 1 pcs 6.013.003.035includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set cabinet-/ wall holder 95 mm high (without installation kit),2 manual air vents ½”, 4 plugs ½”, 2 fill and drain valves ½”

Connecting set 4 1 pcs 6.013.003.045includes 2 connection blocks 3000, 2 end plates,4 nuts M8, 1 set cabinet-/ wall holder 95 mm high (without installation kit),2 manual air vents ½”, 2 plugs ½”, 2 fill and drain valves ½”,2 ball valves 1½” union nut x 1” internal thread, 2 thermometers, 20 identification plates

alternative for minimum height

Delivery without: Wall / Cabinet holder, air vent, plug, clamp screw connections, ball valve, identification plates.With flowmeter blue (0,17 - 2,4 l/min => 10 - 145 l/h) Item no. 6.013.060.+With flowmeter green (0,5 - 3,0 l/min => 30 - 177 l/h) Item no. 6.013.051.+With flowmeter red (1,0 - 4,2 l/min => 60 - 250 l/h) Item no. 6.013.050.+With flowmeter yellow (1,7 - 7,8 l/min => 100 - 465 l/h) Item no. 6.013.052.+

Heating manifold 3000, completely assembled manifold

Type Length (mm) Unit + Item no.HKV 3000 02 circuits 180 1 pcs 020HKV 3000 03 circuits 235 1 pcs 030HKV 3000 04 circuits 290 1 pcs 040HKV 3000 05 circuits 345 1 pcs 050HKV 3000 06 circuits 400 1 pcs 060HKV 3000 07 circuits 455 1 pcs 070HKV 3000 08 circuits 510 1 pcs 080HKV 3000 09 circuits 565 1 pcs 090HKV 3000 10 circuits 620 1 pcs 100HKV 3000 11 circuits 675 1 pcs 110HKV 3000 12 circuits 730 1 pcs 120

Extra charge per further circuitPrice reduction per double Multizone Price reduction per triple Multizone


Connecting set for heating manifold 3000Type Unit Item no.

Connecting set 6 1 pcs 6.013.003includes 2 manual air vents ½”, 2 plugs ½”,2 fill and drain valves ½”, 2 thermometers with immersion sleeve ½”,20 identification plates

The flexible distribution manifold systems made of plastic for sanitary and heatingB

eca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!

Delivery with:1 set wall holder 114 mm, 2 manual air vents, 4 plugs, 2 fill and drain valves, 2 ball valves 1½” union nut x 1” internal thread, identification plates.With flowmeter blue (0,17 - 2,4 l/min => 10 - 145 l/h) Item no. 6.013.153.+With flowmeter green (0,5 - 3,0 l/min => 30 - 177 l/h) Item no. 6.013.151.+With flowmeter red (1,0 - 4,2 l/min => 60 - 250 l/h) Item no. 6.013.150.+With flowmeter yellow (1,7 - 7,8 l/min => 100 - 465 l/h) Item no. 6.013.152.+

Heating manifold 3000, completely assembled manifold with accessories

Type Length with ball valve (mm) Unit + Item no.HKV 3000 02 circuits 235 1 pcs 020HKV 3000 03 circuits 290 1 pcs 030HKV 3000 04 circuits 345 1 pcs 040HKV 3000 05 circuits 400 1 pcs 050HKV 3000 06 circuits 455 1 pcs 060HKV 3000 07 circuits 510 1 pcs 070HKV 3000 08 circuits 565 1 pcs 080HKV 3000 09 circuits 620 1 pcs 090HKV 3000 10 circuits 675 1 pcs 100HKV 3000 11 circuits 730 1 pcs 110HKV 3000 12 circuits 785 1 pcs 120

Extra charge per further circuitPrice reduction per double Multizone Price reduction per triple Multizone




Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

Accessories for heating manifold 3000

Connection cable 1000 mm

Actuator

Type Unit Item no.230 V ~, currentless closed 1 pcs 6.013.009.020230 V ~, currentless opened 1 pcs 6.013.009.1

24 V ~, currentless closed 1 pcs 6.013.02824 V ~, currentless opened 1 pcs 6.013.080


Colour white, wall fastening

Room thermostat

Type Unit Item no.230 V ~,1 break contact currentless closed 1 pcs 6.013.010for actuator currentless closed230 V ~, 1 change-over contact(Heating/Cooling) 1 pcs 6.013.010.050for actuator currentless closed / opened

Installation frame on in-wall box on request

Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

Page [email protected]

List 2020/1a

Accessories for heating manifold 3000 / 2000

Type Unit Item no.Identification plate 1 pcs 6.013.002.010printed tag (kitchen, bathroom etc.)

Plug ½”, self sealing 1 pcs 6.013.016

Automatic air vent ½”, self sealing 1 pcs 6.013.007

Manual air vent ½”, self sealing 1 pcs 6.013.017

Thermometer case black, Ø 63 mm 1 pcs 6.013.014.011with immersion sleeve ½” self sealing

O-ring gasket 36 x 3,05 (10 pcs) 1 set 6.013.059.010for connection block 3000/2000, modules, spacers, not for Multizone 3000

Fill and drain valve with hose connection ¾” 1 pcs 6.013.015.050rotatable, self sealing

Identification plate, plug, air vent, thermometer, o-ring gasket

Type Unit Item no.Ball valve with 1½” union nut x 1” internal thread 1 pcs 6.013.008to shut off the service connectionHex head wrench SW 5 1 pcs 6.013.0082to open or close the ball valve 6.013.008

Ball valve with ¾” union nut x ¾” external thread 1 pcs 6.013.068to shut off the manifold circuits

Ball valve for HKV 3000/2000

For recordation of the return temperatures per heating circuit. With ¾” union nut and ¾” external thread with euro-cone.

Intermediate piece with thermometer Ø 34 mm

Type Unit Item no.Intermediate piece + thermometer (complete) 1 pcs 6.013.013Thermometer Ø 34 mm 1 pcs 6.013.025Intermediate piece ¾” union nut 1 pcs 6.013.026x ¾” external thread with euro-cone


eca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

Type Unit Item no.Supply valve 1 pcs 6.013.033.020Manual regulation threepart 1 pcs 6.013.034

Spare parts for heating manifold 3000, supply module

Type Unit Item no.Flowmeter with lead-sealable capindicator pin blue (0,17 - 2,4 l/min => 10 - 145 l/h) 1 pcs 6.013.158indicator pin green (0,5 - 3,0 l/min => 30 - 177 l/h) 1 pcs 6.013.157indicator pin red (1,0 - 4,2 l/min => 60 - 250 l/h) 1 pcs 6.013.154indicator pin yellow (1,7 - 7,8 l/min => 100 - 465 l/h) 1 pcs 6.013.196

Spare parts for heating manifold 3000, return module

Sealing cap ¾”, for manifold circuit

For closing not required manifold circuits, with gasket

Type Unit Item no.Sealing cap ¾” (10 pcs) 1 set 6.010.009.010

Insertion part for euro-cone

for flat sealing connections

Type Unit Item no.Insertion part for euro-cone, made of plastic (10 pcs) 1set 8.009.000.010

Type Unit Item no.Insulating cover ¾” 10 - 15 mm (10 pcs) 1 set 6.013.018.010Insulating cover ¾” 16 - 20 mm (10 pcs) 1 set 6.013.018.020


Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!

consists of 1 x connection block diagonally drilled, 1 x separation plate 5 mm, 1 x intermediate plate 2 mm, 2 x sleeve nut M8x25, 2 x o-ring gasket.

Installation kit for one pipe manifold

Type Unit Item no.Installation kit for one pipe manifold 3000 1 pcs 6.013.055with connection block 3000, diagonally drilled

Installation kit for one pipe manifold 2000 1 pcs 6.013.056with connection block 2000, diagonally drilled

Wall holder sound absorbed with installation kitType Unit Item no.Universal wall holder 103-115 mm high 1 set 6.013.069

Wall holder 114 mm high 1 set 6.013.001


Wall holder 75 mm high 1 set 6.013.029for one pipe manifold

Wall holder 126 mm high 1 set 6.013.066for renovation



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

Insulating cover ¾”

to insulate the compression fitting ¾”for Tube-Ø 10 - 20 mm

[email protected]

List 2020/1a

For adaptation of manifold circuits with more than 55 mm mean distance. Especially for renovations or special solutions. With o-ring gasket.

Spacers

Type Unit Item no.Spacer red, 55 mm long 1 pcs 6.013.040Spacer red, 45 mm long 1 pcs 6.013.062Spacer red, 20 mm long 1 pcs 6.013.063Spacer red, 15 mm long 1 pcs 6.013.083Spacer red, 5 mm long 1 pcs 6.013.092

Spacer blue, 55 mm long 1 pcs 6.013.041Spacer blue, 45 mm long 1 pcs 6.013.064Spacer blue, 20 mm long 1 pcs 6.013.065Spacer blue, 15 mm long 1 pcs 6.013.084Spacer blue, 5 mm long 1 pcs 6.013.093

Special length on request

Manifold cabinets

Cabinet for heating manifold “Objekt” (in-wall mounting)

Manifold cabinet consists of 1 mm hot-dip galvanized steel sheet, frame and door powder-coated in white (RAL 9010)

Manifold cabinet continuously adjustable in depth and height, universal holder, demountable screed baffle plate, height-adjustable feet, door with metal turning bolt lock.

Cabinet dimensions inside: Height: 665 - 765 mm Depth: 110 - 160 mm (adjustable)Niche dimensions: Height: 675 - 775 mm Depth: 115 - 160 mm

Cabinet galvanized - frame and door white powder-coated: Item no. 6.013.021.+

Cabinet holder sound absorbedType Unit Item no.Universal cabinet holder 103-115 mm high 1 set 6.013.070

Cabinet holder 114 mm high 1 set 6.013.021Cabinet holder 95 mm high 1 set 6.013.042Cabinet holder 75 mm high 1 set 6.013.044for one pipe manifold

Front-wall cabinet for heating manifold (on-wall mounting) on request


Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

Type Unit + Item no.Size 3, for 1-3 circuits 1 pcs 102Cabinet width inside 345 mm, niche width 365 mmSize 5, for 4-5 circuits 1 pcs 106Cabinet width inside 445 mm, niche width 465 mmSize 7, for 6-7 circuits 1 pcs 108Cabinet width inside 545 mm, niche width 565 mmSize 11, for 8-11 circuits 1 pcs 111Cabinet width inside 745 mm, niche width 765 mmSize 14, for 12-14 circuits 1 pcs 114Cabinet width inside 945 mm, niche width 965 mmSize 18, for 15-18 circuits 1 pcs 116Cabinet width inside 1145 mm, niche width 1165 mm

Cylinder lock for cabinet 1 pcs 6.013.0201

List 2020/1a

The economic solution for a combined floor/radiator heating system.The required heat quantity from the radiator circulation is supplied to the floor circulation by a control valve, which is accessed by the electric digital control. Standard version as fix value controller.Because of an additional outside sensor (controlled by outside temperature) or an additional supply sensor the supply temperature of the heat generator can be used as a command variable.Heating manifold consists of well insulating, fibreglass reinforced and temperature-resistant plastic single modules in space-saving construction.Supply module with integrated, manual adjustable valves, change-over to actuators possible.Return module with integrated, adjustable and shut off flowmeter (indicating range 30-177 l/h or 60-250 l/h).Circuit connections ¾” external thread with euro-cone for plastic, copper or multi-layered compound pipe.Service connection 1” internal thread or 1 ½” external thread. Complete with manual air vent, fill and drain valve, plug and ball valve 1”. With adjustable bypass. We recommend the additional installation of a hydraulic switch to avoid hydraulic problems.

With flowmeter blue (0,17 - 2,4 l/min => 10 - 145 l/h) Item no. 6.074.453.+With flowmeter green (0,5 - 3,0 l/min => 30 - 177 l/h) Item no. 6.074.451.+With flowmeter red (1,0 - 4,2 l/min => 60 - 250 l/h) Item no. 6.074.450.+

Type 2 circuits FB + 1 circuit HK + bypass adjustable 485 020 3 circuits FB + 1 circuit HK + bypass adjustable 540 030 4 circuits FB + 1 circuit HK + bypass adjustable 595 040 5 circuits FB + 1 circuit HK + bypass adjustable 650 050 6 circuits FB + 1 circuit HK + bypass adjustable 705 060 7 circuits FB + 1 circuit HK + bypass adjustable 760 070 8 circuits FB + 1 circuit HK + bypass adjustable 815 080 9 circuits FB + 1 circuit HK + bypass adjustable 870 09010 circuits FB + 1 circuit HK + bypass adjustable 925 100

Extra charge per further heating circuit + 55 6.013.074.080


The installation height of the TwinCo 3000 manifold station depends on the orientation of the high-efficiency pump and is 116 mm or 200 mm (depending on the orientation)

Matching manifold cabinets for the TwinCo 3000 can be found on page 12.

Length (mm) + Item no.

TwinCo 3000 manifold station

TwinCo 3000 manifold station completely assembled

TwinCo 3000 installation kit and accessories

The economic solution for a combined floor/radiator heating system.Installation kit consists of electronic control, pump with connections, control valve with actuator, throttle valve, non-return flap, sensor and safety temperature limiter. Completely electrical wired. We recommend the additional installation of a hydraulic switch to avoid hydraulic problems.

Type Unit Item no.TwinCo 3000 installation kit incl. bypass 1 pcs 6.013.074.040

Outside sensor (controlled by atmospheric conditions) 1 pcs 6.013.074.050

Installation kit (controlled by boiler temperature) 1 pcs 6.013.074.052(adjustable supply sensor and bypass)

Control manifoldwith integrated pump shut-down module 1 pcs 6.013.048.030


Beca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

The individual modules are made of fibreglass reinforced and heat and cold resistant plastic. The upper parts are made of brass and have a bellow, which separates the spindle permanently from the water, or a non-return flap. Every ascending pipe can be separately drained with the integrated outlet device. Circuits up and down are possible in the same manifold by assembly single modules rotated 180°. Service connection 1¼” internal thread is on the left or on the right possible, circuit with 1 ½” external thread. The modules are admitted up to a positive operating pressure of 6 bar. Available as modular system or completely assembled. All modules are leak tested.

ATTENTION: Incompatible with water manifold 4000

Water manifold 4001 1¼“ x 1”

Single module with bellow or non-return flap; integrated outlet device and flat gasket.Circuit with 1 ½” external thread, circuit is up and down possible. Delivery without identification plates. Leak tested, admitted for a positive operating pressure up to 6 bar.

Water manifold 4001 single modules (branch T-valve)

Type Unit Item no.Single module 4001 1¼” x 1” with bellow, blue 1 pcs 8.401.001.000

Single module 4001 1¼” x 1” 1 pcs 8.401.002.000with non-return flap (without bellow) blue

Connecting set 5 for water manifold 4001Type Unit Item no.Connecting set 5 for water manifold 4001 1 pcs 8.016.001includes 1 connection block 4000,1 end plate with ½” internal thread, 2 nuts M8, 2 pipe clamps ,5 identification plates with holder.

Individual parts kit for water manifold 4001Type Unit Item no.Connection block with 1 ¼” internal thread + flat gasket 1 pcs 8.003.000

End plate without drilling 1 pcs 8.017.004.020End plate with ½” internal thread 1 pcs 8.017.003End plate with ¾” internal thread 1 pcs 8.017.001End plate with 1¼” internal thread 1 pcs 8.017.002

Pipe clamp with sound insulation 1 pcs 8.005.000(tension range 56 - 60 mm, thread M8 / M10)

Identification plate with holder (5 pcs) 1 set 8.401.010.050(printed and perforated tag)


Threaded bars with rolled thread M8, galvanized1000 mm long (up to 9 circuits) 1 pcs 6.013.005.017


eca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

Type Unit Item no.Physical water treatment (module) 1 pcs 8.040.000(incl. flat gasket)

Physical water treatment for water manifold 4001Made of plastic, red. Permanent water treatment because of constant magnets. Installation directly in front of the single modules or in the risers (attend the assembly instructions). Length 50 mm.

Type Unit Item no.360 mm long, plastic (for 2 - 4 circuits) 1 pcs 8.011.000490 mm long, plastic (for 5 circuits) 1 pcs 8.011.001620 mm long, plastic (for 6 circuits) 1 pcs 8.011.002

Water drain gutter for water manifold 4001with trap

Type Unit Item no.410 mm long, plastic (for 2 - 4 circuits) 1 pcs 8.012.004540 mm long, plastic (for 5 circuits) 1 pcs 8.012.005670 mm long, plastic (for 6 circuits) 1 pcs 8.012.006800 mm long, plastic (for 7 - 8 circuits) 1 pcs 8.012.007Special sizes on request

Mounting plate for water manifold 4001Plastic black, with installation kit. Use as splash guard.

Type Unit Item no.410 mm long, (for 2 - 4 circuits) 1 pcs 8.012.000540 mm long, (for 5 circuits) 1 pcs 8.012.001670 mm long, (for 6 circuits) 1 pcs 8.012.002800 mm long, (for 7 - 8 circuits) 1 pcs 8.012.003Special sizes on request

Mounting clamp for water manifold 4001Steel galvanized, with installation kit

Type Unit Item no.Cock upper part with bellow 1 pcs 8.001.004

Cock upper part with non-return flap 1 pcs 8.001.003

Handwheel for cock upper part 1 pcs 8.001.008

Flat gasket for module WV 4001 (5 pcs) 1 set 8.001.010

Drain spindle with o-ring for module WV 4001 1 pcs 8.001.007

Spare parts for water manifold 4001


eca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!

Made of plastic. The spacer is used for adapting the manifold circuits to existing installations. Ideal for renovations.Precise measure state by order, the spacer is produced exactly.

Spacer for water manifold 4001

Type Unit Item no.Spacer 10 - 50 mm for water manifold 4001 1 pcs 8.015.000(incl. flat gasket)



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

ATTENTION: The series 4001 is incompatible with the series 4000

Order note

1. Manifold connection on the left or on the right?2. Selection options end plate without drilling, ½” internal thread, ¾” internal thread, 1¼” internal thread3. Which circuit into which direction? (in case of manifolds with circuits up and down)4. The measure between the manifold circuits? (in case of manifolds for renovation)

water manifold 4001 1¼” x 1” as completely assembled manifold the followingPlease state by order ofdetails.

for cold water max. +20°C, circuit with 1 ½” external thread, options see ordering note belowwithout drain gutter, mounting clamp / plate and identification plates

Water manifold 4001 1¼” x 1” completely assembled

Type Length (mm) Unit Item no. 2 circuits 260 1 pcs 8.401.013.002 3 circuits 360 1 pcs 8.401.013.003 4 circuits 460 1 pcs 8.401.013.004 5 circuits 560 1 pcs 8.401.013.005 6 circuits 660 1 pcs 8.401.013.006 7 circuits 760 1 pcs 8.401.013.007 8 circuits 860 1 pcs 8.401.013.008 9 circuits 960 1 pcs 8.401.013.00910 circuits 1060 1 pcs 8.401.013.01011 circuits 1160 1 pcs 8.401.013.011

for cold water max. +20°C, circuit with 1 ½” external thread, options see ordering note belowwithout mounting clamp and identification plates

Water manifold 4001 1¼” x 1” completely assembled with gutter, mounting plate

Type Length (mm) Unit Item no. 2 circuits 260 1 pcs 8.401.028.002 3 circuits 360 1 pcs 8.401.028.003 4 circuits 460 1 pcs 8.401.028.004 5 circuits 560 1 pcs 8.401.028.005 6 circuits 660 1 pcs 8.401.028.006

for cold water max. +20°C, circuit with 1 ½” external thread, options see ordering note belowwithout mounting plate and identification plates

Water manifold 4001 1¼” x 1” completely assembled with gutter, mounting clamp

Type Length (mm) Unit Item no. 2 circuits 260 1 pcs 8.401.014.002 3 circuits 360 1 pcs 8.401.014.003 4 circuits 460 1 pcs 8.401.014.004 5 circuits 560 1 pcs 8.401.014.005 6 circuits 660 1 pcs 8.401.014.006


eca

use

of te

chnic

al c

hanges

the s

upplie

d it

em

s ca

n d

evi

ate

fro

m the il

lust

ratio

ns!




Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a




Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

Renovation Professional - Heating manifold 3000

The Renovation Professional Heating manifold 3000 is especially suitable for renovation projects with fixed given dimensions between axes (circuits). The Renovation Professional replaces old manifolds in need of renovation very easy.

With our various spacers, the manifold can be easily adapted to existing installations

consists of 1 x connection block diagonally drilled, 1 x separation plate 5 mm, 1 x intermediate plate 2 mm, 2 x sleeve nut M8x25, 2 x o-ring gasket.

Installation kit for one pipe manifold

Type Unit Item no.Installation kit for one pipe manifold 3000 1 pcs 6.013.055with connection block 3000, diagonally drilled

Installation kit for one pipe manifold 2000 1 pcs 6.013.056with connection block 2000, diagonally drilled

Wall holder sound absorbed with installation kitType Unit Item no.Universal wall holder 103-115 mm high 1 set 6.013.069



Wall holder 75 mm high 1 set 6.013.029for one pipe manifold

Wall holder 126 mm high 1 set 6.013.066for renovation

For adaptation of manifold circuits with more than 55 mm mean distance. Especially for renovations or special solutions. With o-ring gasket.

Spacers

Type Unit Item no.Spacer red, 55 mm long 1 pcs 6.013.040Spacer red, 45 mm long 1 pcs 6.013.062Spacer red, 20 mm long 1 pcs 6.013.063Spacer red, 15 mm long 1 pcs 6.013.083Spacer red, 5 mm long 1 pcs 6.013.092

Spacer blue, 55 mm long 1 pcs 6.013.041Spacer blue, 45 mm long 1 pcs 6.013.064Spacer blue, 20 mm long 1 pcs 6.013.065Spacer blue, 15 mm long 1 pcs 6.013.084Spacer blue, 5 mm long 1 pcs 6.013.093

Special length on request

Alphabetical index


Name Page Name Page

Accessories HKV 3000, HKV 2000 10 Manifold cabinets 12Accessories TwinCo 3000 13 Manifold station TwinCo 3000 13Actuator 9 Manual air vent ½” (q.v. connecting set HKV) 10Air vent ½” 10 Mounting clamps for WV 4001 1 ¼” 15Automatic air vent ½” 10 Mounting plates for WV 4001 1 ¼” 15

Multizone 3000 7 Ball valve ¾” HKV 3000/2000 10Ball valve 1 ½” HKV 3000/2000 10 Nuts M8 (q.v. connecting set HKV) 5, 6, 14Bellow WV 4001 1 ¼” 15

O-rings HKV 3000/2000 10Cabinets “Objekt” 12 Outside sensor 13Cabinet holder sound absorbed 12Cock upper part WV 4001 1 ¼” 15 Parts list 4Connecting set HKV 2000 5 Physical water treatment WV 4001 1 ¼” 15Connecting set WV 4001 1 ¼” 14 Plug ½” (q.v. connecting set HKV) 10Connecting sets HKV 3000 6 - 8Connection block HKV 2000 5 Room thermostat 9Connection block HKV 3000 6Connection block WV 4001 1 ¼” 14 Sealing cap ¾” 11Control manifold with integrated pump shut-down module 13 Single modules HKV 2000 5Cylinder lock for cabinet 12 Single modules HKV 3000 6

Single modules WV 4001 14Drain gutters for WV 4001 1 ¼” 15 Spacer WV 4001 1 ¼” 15Drain spindle WV 4001 1 ¼” 15 Spacers HKV 11

Spare parts HKV 3000 10End plates HKV 2000 5 Spare parts WV 4001 1 ¼” 15 End plates WV 4001 1 ¼” 14

Thermometer 34 mm 10Fill and drain valve 10 Thermometer 63 mm with immersion sleeve 10Flat gasket WV 4001 1 ¼” 15 Threaded bars HKV, WV 4001 5, 6, 14

Handwheel WV 4001 1 ¼” 15 Universal holder 11, 12Heating manifold 2000 5Heating manifold 3000 6, 8 Variation possibilities, manifold systems 3

Identification plates HKV 10 Wall holder sound absorbed with installation kit 11Identification plates WV 4001 1 ¼” 14 Water drain gutters for WV 4001 1 ¼” 15Insertion part for euro-cone 11 Water manifold 4001 1 ¼” 14, 16Insulation cover 11 Water treatment physical WV 4001 1 ¼” 15Installation kit controlled by boiler temperature 13Installation kit for one pipe manifold 11Installation kit TwinCo 3000 13Intermediate piece with thermometer 10




Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

Terms of Sale, Delivery and Payment

Fa. SBK Siegfried Böhnisch Kunststofftechnik GmbH


§ 1 Offers, confirmations of order, conclusion of contract § 6 Complaints1.1 No offer is binding. We reserve the right to alter, add to and abandon our 6.1 If defects or damages which are recognized during an orderly incoming production at any time. control, customers must complain immediately on arrival of merchandise.

Complaints about defects which cannot be recognized on arrival must be made 1.2 A contract results with our written acceptance of order. The contents of the immediately when found. Every claim for guarantee is lost, however, 5 years after order acceptance are also the contents of the contract, as long as the customer delivery.does not object to the contract immediately after receiving it. Otherwise, our confirmation of order applies and our general terms of sale, delivery and payment 6.2 Whether quantity or amount in weight, discrepancies are to be queried at the are approved. rail or forwarding company (haulage contractors), on receiving the merchandise

and written confirmation of the difference is to be obtained. Defective items are to 1.3 The issued order cannot be changed or cancelled after the sending of the be sent immediately, freight-free and postage-free.order confirmation.

1.4 The terms of sale, delivery and payment in hand have priority in every case § 7 Guaranteeover future purchase terms of our customers. 7.1 We undertake a guarantee for our water manifold 4001, multipurpose

manifold 5000 and distribution manifold 3000 / 2000 / 1000 of five years. We not 1.5 The price is ex works and without turnover tax (VAT). undertake the guarantee for other delivered items by us.

1.6 Increases in costs between the order confirmation and delivery entitle us to appropriate price adjustments. § 8 Sales Return

8.1 In the case of sending backs of deliveries to us which are not justifiable, we will calculate processing costs. At least 10 % of the invoiced value of delivery.

§ 2 Conditions of Payment Sending backs can only occur with our consent explained expressly first. The 2.1 Outside of Germany 100 % of the invoice amount when the goods are ready items in original packing returned with our consent have to be in a marketable for dispatch on our premises. condition.

2.2 If there are delays in payment , we are entitled to charge interest payable on arrears, at 4 % over the prevailing bank rate, however, at least 10 % p. a. Only § 9 Delays in delivery and release from delivery obligationpayments made to the corresponding place of payment, stated in the invoice, are 9.1 The obligation of delivery as well as compliance with keeping within delivery recognized when the sum of the invoice is irrevocably credited to our account. date will be revoked by all conditions which are exceptional and for which we are

not liable. This is also the case when business is interrupted or the sending of the 2.3 The date of the invoice is relevant for date of payment in all cases, even if the goods is made impossible due to these conditions.recipient receives the merchandise after the delivery date due to reasons for which we are not responsible. 9.2 If we are in delay with the delivery, the purchaser must grant an appropriate

extension of at least six weeks. The purchaser does not have the right to cancel a 2.4 Passing the date of payment or entry into lack of credit standing of the party contract, also not after granting extension of time, if we have already started with ordering as well as other important reasons entitle us to cancel the contract the production of the ordered goods.without a claim for performance and compensation against us, through this, being justified.

§ 10 Failure to deliver10.1 Failure to deliver cannot be judged according to the situation of single items.

§ 3 Retention of Property3.1 The delivered merchandise remains our property until complete payment is received. Our right of property affects the proceeds procured by the purchaser in § 11 Claims for damages, limitation of the guaranteecase of alienation. The purchaser must inform his customer about the existing 11.1 All claims which are made for and apply to the title of guarantee or a retention of property for further alienation. miscellaneous claim for damages against us, are limited to the amount of the net

factor value of the appropriate object. 3.2 The purchaser must inform us immediately, if third party claims are made for the delivered merchandise or rights constituted. Miscellaneous prosecution 11.2 We have the right to replace miscellaneous claims for guarantee by costs are carried by the purchaser. supplying equivalent parts. This does not entitle the customer to claim a price

reduction.

§ 4 Forwarding and Packaging 11.3 Claims for damages due to installation, maintenance and instruction costs 4.1 Place of contract performance is the company´s location in Neuenstein etc. will not be recognized or remunerated by us.(Germany).

11.4 We accept no liability of any kind for damage which is caused to persons or 4.2 Deliveries are freely to destination within german customs frontier from euro objects by the use or installation of products, also damaged ones, delivered by 750,00 and more, inclusive wrapping. us. We are also not liable for damages which are caused during improper use,

installation, overuse or natural wear and tear.4.3 Forwarding is carried out ex works Neuenstein at the risk of the ordering party, also by freight-free delivery.

§ 12 Place of contract performance, court of jurisdiction4.4 The seller is only obliged to take out an insurance if and as far as this has been 12.1 Place of contract performance is Neuenstein (Germany). Court of agreed in writing. jurisdiction is the competent court of jurisdiction in Heilbronn (Germany) without

any exception.

§ 5 Changes of Models5.1 We reserve the right to change constructions, tolerances and improvements.

5.2 We reserve the right to a reduction of or an addition to the delivery by 5 % of the quantity ordered for specially produced products which are made according to a sample, model or drawing.



Telefon : +49 (0) 7942 - 944 926 0Telefax : +49 (0) 7942 - 944 926 99

[email protected]

List 2020/1a

heating manifold water manifold - sbk-neuenstein.de · available as modular system or completely...

Documents