heaters for the cooling system tests (lab modules)
DESCRIPTION
Heaters for the cooling system tests (lab modules). A. Samoshkin Last update 04- Apr -2011. t° sensors ( half – module Type0 ). MB. DB. T. T. T. T. T. T. T. T. T. T. T. T. T. T. Module Type 0 cooling scheme. 25˚C. 35˚C. DB magnets heating. - PowerPoint PPT PresentationTRANSCRIPT
1
Heaters for the cooling system tests
(lab modules)
A. SamoshkinLast update 04-Apr-2011
JINRAlexandre.Samochkine @ cern.ch
2
DB
MB
T T
TT T T
T T
T T
t° sensors ( half – module Type0 )
T T T T
JINRAlexandre.Samochkine @ cern.ch
3
Module Type 0 cooling scheme
35˚C
25˚C
JINRAlexandre.Samochkine @ cern.ch
4
We were planning to use the 220 V – 200 W heaters, and every mockup mounts 8 of them. We have chosen such a high power to reduce the time needed to warm
up the mockup (1600 W should warm up the 170 kg of steel in less than 10 minutes). Anyway, if is not convenient to deliver that much power, it is possible to use lesser heating and pay that with some extra time during the warm-up phase.
DB magnets heating
JINRAlexandre.Samochkine @ cern.ch
5
Power dissipation by T0 Lab Module components
DB Q DB Q
410 W410 W 410 W 410 W 410 W410 W 410 W 410 W
110 W110 W 110 W110 W
150 W 150 W
PETS 440 WDB Q 300 WAS 3280 W
* Technical Specification for the CLIC Two-Beam ModuleG. RIDDONE EDMS 1097388
*
TH Table
JINRAlexandre.Samochkine @ cern.ch
6
Heaters for PETS and AS (Chosen)
Ø 8
508 mm
Ø 8
2024 mm
JINRAlexandre.Samochkine @ cern.ch
7
Heaters for T0 Test Module (option retained)
max 480 W max 480 W
1600 W 1600 W
Max 3050 W
- Two 20” (508 mm) long heaters for DB (PETS)- One 80” (2024 mm) long heater for MB (AS)
- Sixteen 200 W cartridges for DB (Quads)
JINRAlexandre.Samochkine @ cern.ch
8
3D Integration layout
Back
JINRAlexandre.Samochkine @ cern.ch
9
We need: Qty OptionsMetric US Copper Incoloy StSt Steel
508mm, Ø 11,2/12,5mm 20"/0,49 4 1925W/600V 1055W/480V 720W/480V 480W/240V
2024mm, Ø 8mm 80"/0,315 2 6095W/240V 3050W/240V 2285W/240V1525W/240V
TUBULAR HEATERS HOTWATT (USA)
Power Dissipation Scheme
AS
PETS
EXTRA
10
JINRAlexandre.Samochkine @ cern.ch
11
Heaters for DB & MB (two test modules Type 0)
- Four 20” (508 mm) long heaters for DB Max 480 W, 240 V, Ø 11,176mm, steel
(Ref: TS 44-20/480W240V/SF3S)- Two 80” (2032 mm) long heater for MB Max 6100 W, 240 V, Ø 11,176mm,
copper (Ref: TS 44-20/480W240V/SF3S)- Thirty two 200W cartridges for DB Quads
! C= 5/8”=16 mm The power leads need some space and wires should pass out To 3D
- Option2 not retained
JINRAlexandre.Samochkine @ cern.ch
12
Two modules (optional configuration)
- Two 160” (4064 mm) long heaters for MB & DB
?~6900 W (copper sheath) and ~4400 W (steel sheath)
- Option3 not retained
JINRAlexandre.Samochkine @ cern.ch
13
JINRAlexandre.Samochkine @ cern.ch
14
Test Module Type 0 cooling scheme
JINRAlexandre.Samochkine @ cern.ch
15
HOTWATT (USA)
Herewith the cost from parts alone, none packed, ex factory Hotwatt USA, without packing and transportation costs. (Price based on min. 2 pcs.)
TC31-160/6800W240V/SF3S CHF 285.00 / PCSTC44-160/6800W240V/SF3S CHF 308.00 / PCS
Packing-case and freight charge from Hotwatt work to CIF-Switzerland: CHF 1200.-Lead time 6-8 weeks (~ 6 weeks for manufacturing + ~2 week for delivery).
Contact:Felix MeyerSibalco AG, Birmannsgasse 8, 4055 Basel, Tel.: +41 61 264 10 10, Fax: +41 61 264 10 15, [email protected], www.sibalco.ch
Ø 8 Ø 11,2
4064
Phone conversation 15-Mar 16:00 no control unit supplied. Official offer must be issued by 17-Mar-2001Offer received 16-Mar 11:59 Clarification on required total qty of units and order them