HDT Steering Wheel identification.

VC Momo Sigma steering Wheel A38 Has build number of car engraved on it. This wheel was also available from Momo without a horn pad. 380mm Diameter.

VH Grp3 380mm in diameter Model Typ C38 KBA 70024 Known as Cavillino, White stitching Re released by Momo as Cavillino 2 Sticker still available as repo

VH SS Model Typ C38 KBA 70023 or 24 Known as Master, White stitching. 380mm Diameter.

VH ADP Same as VC sigma A38 The horn pad is the same one used over the entire size range. This wheel was also available without horn pad (no holes) 380mm Diameter.

VK Grp3, LE, SS Flyer, Calais, Director Used in VL’s as well. Model Typ V38 KBA 70023 or 24. 380mm Diameter.

VK GrpA Similar Corse Model Type V38 KBA 70088 380mm Diameter. Also re released as Monte Carlo with a grained leather.

See horn pad

VL GrpA Ghibli Model Typ V36 and V37 Has horn buttons under dimples. Some horn pads have smaller triangle. No stitching

3 different horn pads used, final one has embossed Peter Brock signature

VH SS Model Typ C38 KBA 70023 Known as Master. 380mm Diameter.

VL LE, Sports and others Known as Cobra White stitching Horn pads from the VL GrpA Ghibli also fit this model. 370mm seems to be quite common.

Magnum Momo Moretti

Magnums Momo Gritti 380mm Diameter. Also available with silver spokes.

VL Grp 3 Ghibli The VL Ghibli wheel did not have stitching around it, seems unique.

4 Spoke version,Ghibli 4

Momo regularly revived older models and renamed them. Grained and smooth leather was used by Momo. Momo hubs came to HDT black and were painted to suit the trim. Hub number 4805 A Boss hub looks almost the same as the Momo one. 360mm horn pads fit the 380mm wheels. Horn pads were interchanged and custom pads available. Horn buttons are now smaller. 6mm tolerence on diameters.

VL Director "Design by F.A. Porsche" horn button has PD for Porsche Design Linea (on the right) has concealed horn buttons.

VC horn button and horn pad also used on the VH ADP

Peter Brock signature horn button, commonly found in Flyers and Magnums.

Black red Black HDT horn button, found in VK GrpA and others. A Blue black blue found after secondary manufacture status was granted to HDT in the beginning of 1985.

VK GrpA horn button retainer. Has fine radius on outer edge and step underneath. Will fit all wheels and uses longer screws.