Hard Reset for P3-X

The hard reset will allow you to fix you P3-X when it would crash or freeze up

1. You would first need to get a small pin or a paper clip and then you would insert it to

the reset button that is located on the right side of the projector and press on it. The

location of the reset button on the projector as shown below:

2. After you press the reset button it should fix your P3-X and you would turn the

projector back on

3. Now your P3-X is ready to be used again

4. If you have done these steps and there is still a problem with your P3-X, please

contact AAXA Technical Support either by email or by phone for further assistance.

Mirroring with iPod Touch 4th or 5th gen,

iPhone 4S/5/5C/5S, or iPad 2, 3, 4, Mini

Mirroring allows you to see the same content on display to another.

Apple products capable of mirroring are the iPod Touch 4th, 5th gen, iPhone 4S/5/5C/5S, or iPad

2, 3, 4, and iPad Mini only.

1. If you have a device that has the 30-pin dock connector, you will need this AV adapter

from the Apple store: 30-pin Digital AV Adapter - If you have a device that has

Lightning, you will need the Lightning Digital AV Adapter.

2. Using the supplied HDMI cable, connect the smaller end of the cable to the P3X, and

the larger end to your Apple Digital AV Adapter, as shown below:

3. Turn on your P3X and on the menu screen, select the option circled in red below:

4. Then select the HDMI option (circled in red below):

5. If you have everything connected and turned on, you should now be able to see

whatever you see on your iPod Touch 4th or 5th gen, iPhone 4S/5/5C/5S, or iPad 2, 3,

4, Mini on your AAXA Projector.

Mirroring with a Samsung Galaxy S3, S4,

Note II, or Note III

Mirroring allows you to see the same content on display to another.

In this case, the only devices we have verified to be functioning are the Samsung Galaxy S3, S4,

Note II, or Note III.

1. First, you will need a MHL Adapter. For your convenience, you can purchase it

directly from our store: MHL Adapter.

2. Put in the micro USB end of the MHL Cable into the bottom of your Samsung Galaxy

S3, S4, Note II, or Note III. As shown below:

3. Insert the full HDMI into the mini-HDMI adapter and plug into your P3X. Then

connect the USB to the full-size USB port on the P3X.

4. Turn on your P3X once everything is connected and on the menu screen select the

option circled in red below:

5. Then choose the HDMI option circled in red below:

6. Now you are ready to enjoy the full mirroring capabilities of P3X and your Samsung

Galaxy smartphone.

Convert Your Video Files to a Format

Supported by AAXA Projectors

These are some tips on how to play supported videos on AAXA Projectors

There are many types of codecs for AVI. So even though a file may say it is an AVI extension, it

may be using a codec that the projector doesn’t recognize.

Please try the following:

Please go to this link here to download Format Factory. We have had great success with this free

and lightweight conversion program. Use it to convert your video to AVI and that should do the

trick. Note: USB or SD card must also be under 32GB in size for the projector to read.

Projector Native

Resolution

P1 Jr 380p

P3 1024 x 600

P4 1024 x 768

M1 800 x 600

M2 1024 x 768

L1V2 800 x 600

OEM-250 800 x 600

P2 Jr 380p

P300 1280 x 800

LED

Showtime 1280 x 800

P4-X 800 x 480

LED Pico 960 x 540

P3X 854x480

Connecting a computer to the P3X via HDMI

Only computers that support video output via HDMI will work with the P3X.

1. Using the supplied HDMI cable, connect the smaller end of the cable to the P3X, and

the larger end to your laptop or computer's HDMI port, as shown below:

2. Once connected, turn on the P3X and on the menu screen, select the option circled in

red below:

3. Then select the HDMI option (circled in red below):

4. On your computer screen, it may have already automatically connected through the

HDMI, but you can adjust the setting to fit your needs. If you have Windows 7, press

and hold down the Windows Key (the key with a windows flag) and then while

holding down that key, press "P". You can then set it the following ways:

o 1. Disconnect your projecting screen

o 2. Mirror your computer screen with what's projecting

o 3. Make the projection an extension of your computer screen

o 4. Only operate your computer on the projected screen and nothing on your

computer screen

5. Your P3X is now a second screen to your computer!

Viewing files off of a USB and/or MicroSD

Card

1. Connect your USB flash drive or MicroSD card to the projector and turn it on.

2. On the home screen select from any of the red circles below as appropriate to the

types of file you are playing (if you're playing video, pictures, music, or text files).

3. Select the type of device you have plugged into your P3X (USB Flash Drive or

MicroSD Card as shown below)

4. Navigate to the media you wish to play and hit OK to play.