hanmore bureau veritas

of 17/17
Materials Bratislava 11/12/13 April 2005 Presented by Peter Hanmore For the benefit of business and people TAIEX Workshop on the Pressure Equipment Directive

Post on 07-Dec-2015

221 views

Category:

Documents

3 download

Embed Size (px)

DESCRIPTION

Materiais

TRANSCRIPT

PowerPoint PresentationTAIEX Workshop on the
1
Materials
Harmonised
Standards
Product Standards, e.g.
EN 12953 – Shell boilers
EN 13480 – Industrial Piping
Applied for by Manufacturer of PE or material
New materials may require testing
Issued by Notified Body
*
Provide evidence of compliance
with allowable specification, i.e.
Harm Std, EAM, PMA
Manufacturer ensures material
material
Materials
PMAs
4
be accompanied by documentation issued by the material manufacturer affirming conformance to a specification.
Cat II, III, IV - specific product control - e.g. (EN 10204 - 3.1) -{prepared by material manufacturer}
Materials
Certification
5
Material manufacturer’s certificate acceptable only if:
Material manufacturer has Quality System, e.g. ISO 9000, approved by competent body established in EU,
If not: independent witness, e.g.
(EN 10204-3.2) Guideline 7/5
causes catastrophic release of pressure
Joining Materials
Welding Consumables
Appropriate properties
*
EN 10204 revised to ensure material certification requirements meet PED
2.2
Manufacturer declares conformance with order with test results based on non specific inspection
2.1
Manufacturer declares conformance with order without test results
With a network of engineer inspectors covering the whole of the UK, Bureau Veritas is able to provide a quality of service that is almost unrivalled in the inspection industry. This is directly as a result of our acquisition of Plant Safety Limited in December 2001
*
Tests and frequency per product specification and order
3.2
Manufacturer and Inspection body declares conformance with order with test results supplied
3.1
Validated by manufactures
product providing traceability
product providing traceability
maintained
With a network of engineer inspectors covering the whole of the UK, Bureau Veritas is able to provide a quality of service that is almost unrivalled in the inspection industry. This is directly as a result of our acquisition of Plant Safety Limited in December 2001
*
QS approval
Peter Hanmore
Technical Manager
[email protected]