halo rl56 spec sheet€¦ · the halo rl560 is a complete led baffle-trim module for 5” and 6”...

4
DESCRIPTION The Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is cULus Listed for use with Halo and All-Pro, and is UL Classified for use with other compatible 5” and 6” housings. The RL560 with integral LED driver offers 120 volt dimming capability. The RL560 lens provides uniform illumination and wet location listing. The die-cast construction makes any housing AIR-TITE for added HVAC savings and code compliance. SPECIFICATION FEATURES RL560WH White RL560SN Satin Nickel 80CRI 2700K, 3000K and 3500K 90CRI (white only) 3000K and 3500K 5-Inch / 6-Inch LED Recessed Retrofit Module-Trim FOR USE IN INSULATED CEILING AND NON- INSULATED CEILING RATED HOUSINGS HIGH EFFICACY LED WITH INTEGRAL DRIVER - DIMMABLE www.cooperlighting.com ADV131344 August 29, 2013 9:30 AM MECHANICAL Module - Trim • Module construction includes LED, heat sink, reflector, lens, baffle and trim ring • Durable die-cast aluminum construction • Regressed baffle • Heat sink designed to conduct heat away from the LED keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments • Halo matte white paint finish • Halo satin nickel plated finish Lens • Regressed lens • Impact-resistant polycarbonate • Convex form for lamp-like appearance • High lumen transmission • Diffusing for even illumination MOUNTING Torsion Spring Brackets • Pre-installed precision formed torsion spring brackets secure torsion springs and adjust to fit 5” or 6” compatible housings 5” & 6” Friction Blade Kit • Precision formed friction blades included • Provide alternative to torsion springs for retrofit in 5” and 6” housings without torsion spring mounting tabs. • Friction blade design allows the RL560 to be installed in any position within the housing aperture (360 degrees). • Replacement Kit: model RL56CLIP Housing Compatibility See Housing Compatibility LED • ColorTemperature (CCT) Options: 2700K, 3000K, and 3500K • Color Rendering Index (CRI) Options: 83 and 92 • Lumen maintenance: L70 at 50,000 hours projected in accordance with IES TM-21 • LED is a chip on board design consisting of a multiple LED package with proximity phosphor coating to create one virtual white light source for a productive “cone of light” ELECTRICAL Power Connections • LED connector is a non-screw base luminaire disconnect offering easy installation with the matching Halo 5” H550 Series and 6” H750 Series housings. • LED Connector meets California Title-24 high-efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire. • The included E26 medium screw-base Edison adapter provides easy retrofit of incandescent housings (see Housing Compatibility). Ground Connection • Separate grounding cable included on the module for attachment to the housing during installation. LED Driver • Dimmable driver is a 120 Volt, high efficiency, electronic power supply providing DC power to the LED. • Driver meets FCC EMI/RFI Consumer Level limits for use in residential and commercial installations. • Driver features high power factor, low THD, and has integral thermal protection in the event of over temperature or internal failure. Dimming • The Halo RL560 LED module is designed for dimming capability to 10% in normal operation with standard 120V electronic low voltage, LED-Rated, and many incandescent dimmers. The RL560 has dimming capability to 5% with select dimmers with low end trim adjustment. (Consult dimmer manufacturer for dimmer compatibility and details. Note, some dimmers require a neutral in the wallbox. Warranty Cooper Lighting provides a five year limited warranty on RL56 LED. Compliance Labels • UL/cUL Listed 1598 Luminaire (with listed Halo and All-Pro housings) • UL Classified (with other housings - see Housing Compatibility) • UL/cUL Listed for Damp Location • UL/cUL Listed for Wet Location – Shower Applications • IP56 Ingress Protection rated • May be installed in housings in direct contact with air permeable insulation** and combustible material Qualification • ENERGY STAR ® qualified residential and commercial* • Can be used for State of California Title 24 high efficacy luminaire compliance* • Can be used for International Energy Conservation Code (IECC) high efficacy luminaire compliance IC and AIR-TITE™ Certified under ASTM-E283 and listed UL/cUL 1598 with compatible housings, may be used to meet insulated ceiling** and restricted air-flow requirements such as: • Washington State Energy Code • International Energy Conservation Code (IECC) • NewYork State Energy Conservation Construction Code (NY-ECCC) • State of CaliforniaTitle 24 “Recessed Luminaires in Insulated Ceilings.” Catalog # Project Comments Prepared by Type Date HALO * Qualified and compliant. Refer to ENERGY STAR ® Qualified Products List and CEC (T24) Appliance Database for listings. ** Not for use with housings in direct contact with spray foam insulation. See ordering information table for available models. 2700K nominal 2700K 2725 3000K 3500K 4100K 5000K 6500K 3000K nominal 2700K 3045 3000K 3500K 4100K 5000K 6500K 3500K nominal 2700K 3465 3000K 3500K 4100K 5000K 6500K

Upload: others

Post on 22-Jul-2020

2 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: Halo RL56 spec sheet€¦ · The Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit

DESCRIPTIONThe Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit installation. The RL560 is cULus Listed for use with Halo and All-Pro, and is UL Classified for use with other compatible 5” and 6” housings. The RL560 with integral LED driver offers 120 volt dimming capability. The RL560 lens provides uniform illumination and wet location listing. The die-cast construction makes any housing AIR-TITE for added HVAC savings and code compliance.

SPECIFICATION FEATURES

RL560WH†

White

RL560SN†

Satin Nickel

80CRI2700K, 3000K and 3500K

90CRI (white only)3000K and 3500K

5-Inch / 6-Inch LEDRecessed Retrofit

Module-Trim

FOR USE ININSULATED CEILING

AND NON- INSULATEDCEILING RATED

HOUSINGS

HIGH EFFICACY LEDWITH INTEGRAL

DRIVER - DIMMABLE

www.cooperlighting.comADV131344

August 29, 2013 9:30 AM

MECHANICALModule - Trim• Moduleconstructionincludes LED, heat sink, reflector, lens, baffle and trim ring• Durabledie-castaluminum construction• Regressedbaffle• Heatsinkdesignedtoconduct heat away from the LED keeping the junction temperatures below specified maximums, even when installed in insulated ceiling environments• Halomattewhitepaintfinish• Halosatinnickelplatedfinish

Lens• Regressedlens• Impact-resistantpolycarbonate• Convexformforlamp-like appearance• Highlumentransmission•Diffusingforevenillumination

MOUNTINGTorsion Spring Brackets• Pre-installedprecisionformed torsion spring brackets secure torsion springs and adjust to fit 5” or 6” compatible housings

5” & 6” Friction Blade Kit• Precisionformedfriction blades included• Providealternativeto torsion springs for retrofit in 5” and 6” housings without torsion spring mounting tabs.• Frictionbladedesignallows the RL560 to be installed in any position within the housing aperture (360 degrees).• ReplacementKit:model RL56CLIP

Housing CompatibilitySee Housing Compatibility

LED• ColorTemperature(CCT)† Options:2700K,3000K,and 3500K• ColorRenderingIndex(CRI)†

Options: 83 and 92• Lumenmaintenance: L70 at 50,000 hours projected in accordance with IES TM-21

•LEDisachiponboarddesign consisting of a multiple LED package with proximity phosphor coating to create one virtual white light source for a productive “cone of light”

ELECTRICALPower Connections• LEDconnectorisanon-screw base luminaire disconnect offering easy installation with the matching Halo 5” H550 Series and 6” H750 Series housings.• LEDConnectormeets California Title-24 high-efficacy luminaire requirement for a non-screw base socket, and where required to qualify as a high-efficacy luminaire.• TheincludedE26medium screw-base Edison adapter provides easy retrofit of incandescent housings (see Housing Compatibility).

Ground Connection• Separategroundingcable included on the module for attachment to the housing during installation.

LED Driver• Dimmabledriverisa120Volt, high efficiency, electronic power supply providing DC power to the LED.• DrivermeetsFCCEMI/RFI Consumer Level limits for use in residential and commercial installations.• Driverfeatureshighpower factor, low THD, and has integral thermal protection in the event of over temperature or internal failure.

Dimming• TheHaloRL560LEDmodule is designed for dimming capability to 10% in normal operation with standard 120V electronic low voltage, LED-Rated, and many incandescent dimmers. The RL560 has dimming capability to 5% with select dimmers with low end trim adjustment. (Consult dimmer manufacturer for dimmer

compatibility and details. Note, some dimmers require a neutral in the wallbox.

WarrantyCooper Lighting provides a fiveyear limited warranty on RL56LED.

Compl ianceLabels• UL/cULListed1598Luminaire (with listed Halo and All-Pro housings)• ULClassified(withother housings - see Housing Compatibility)• UL/cULListedforDamp Location• UL/cULListedforWetLocation – Shower Applications• IP56IngressProtectionrated• Maybeinstalledinhousings in direct contact with air permeable insulation** and combustible material

Qualification• ENERGYSTAR® qualified residential and commercial*• CanbeusedforStateof California Title 24 high efficacy luminaire compliance*• CanbeusedforInternational Energy Conservation Code (IECC) high efficacy luminaire compliance

IC and AIR-TITE™Certified under ASTM-E283 andlistedUL/cUL1598withcompatible housings, may be used to meet insulated ceiling** and restricted air-flow requirements such as:• WashingtonStateEnergy Code• InternationalEnergy Conservation Code (IECC)• NewYorkStateEnergy Conservation Construction Code(NY-ECCC)• StateofCaliforniaTitle24 “Recessed Luminaires in Insulated Ceilings.”

Catalog #

Project

Comments

Prepared by

Type

Date

HALO

*Qualified and compliant. Refer to ENERGY STAR® Qualified Products List and CEC (T24) Appliance Database for listings.

** Not for use with housings in direct contact with spray foam insulation.† See ordering information table for available models.

2700K nominal

2700K

2725

3000K 3500K 4100K 5000K 6500K

3000K nominal

2700K

3045

3000K 3500K 4100K 5000K 6500K

3500K nominal

2700K

3465

3000K 3500K 4100K 5000K 6500K

4000K nominal

2700K

3985

3000K 3500K 4100K 5000K 6500K

2700K nominal

2700K

2725

3000K 3500K 4100K 5000K 6500K

3000K nominal

2700K

3045

3000K 3500K 4100K 5000K 6500K

3500K nominal

2700K

3465

3000K 3500K 4100K 5000K 6500K

4000K nominal

2700K

3985

3000K 3500K 4100K 5000K 6500K

2700K nominal

2700K

2725

3000K 3500K 4100K 5000K 6500K

3000K nominal

2700K

3045

3000K 3500K 4100K 5000K 6500K

3500K nominal

2700K

3465

3000K 3500K 4100K 5000K 6500K

4000K nominal

2700K

3985

3000K 3500K 4100K 5000K 6500K

Page 2: Halo RL56 spec sheet€¦ · The Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit

LIGHTING FACTS

DIMENSIONS

Ø 7.25”[184mm]

3.15”[80mm]

Ø 7.25”[184mm]

3.15”[80mm]

RL560WH68272700KSource

RL560WH69303000KSource

RL560WH69353500KSource

RL560WH6830 3000KSource

RL560WH68353500KSource

RL560SN68303000KSource

RL560SN68272700KSource

www.cooperlighting.com

ENERGY DATA

RL560 Series Energy Data:(Values at non-dimming line voltage)Minimum Starting Temp: -30°C (-22°F)EMI/RFI: FCC Title 47 CFR, Part 18, Class B (Consumer)Sound Rating: Class A standardsInput Voltage: 120VPower Factor: >0.90Input Frequency: 60HzTHD: <20%Input Power: 10.5W (RL560WH6827, RL560SN6827, RL560WH6930, RL560WH6935)Input Power: 9.4W (RL560WH6830, RL560SN6830, RL560WH6835)Input Current: .15AMaximum IC (Insulated Ceiling) Ambient Continuous Operating Temperature: 25°C (77°F)Maximum Non-IC Ambient Continuous Operating Temperature 40°C (104°F)

R L 5 6 S e r i e s

Page 3: Halo RL56 spec sheet€¦ · The Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit

www.cooperlighting.com

HOUSINGS - Halo and All-Pro UL Listed Compatibility

Compatible Halo LED Housings with LED luminaire connector (high-efficacy compliant)

HALO

Recessed Can Size Catalog Number Description

5" H550ICAT 5" LED, Insulated Ceiling, AIR-TITE, New Construction Housing

H550RICAT 5" LED, Insulated Ceiling, AIR-TITE, Remodel Housing

6"

H750ICAT 6" LED, Insulated Ceiling, AIR-TITE, New Construction Housing

H750RICAT 6" LED, Insulated Ceiling, AIR-TITE, Remodel Housing

H750T 6" LED, Non-IC, AIR-TITE, New Construction Housing

H750RINTD010 6" LED, Non-IC, AIR-TITE, Remodel International Housing, 0-10V DC Dimming

H750TCP 6" LED, Non-IC, New Construction/Remodel Chicago Plenum Housing

H2750ICAT 6” LED, Shallow, Insulated Ceiling, AIR-TITE, New Construction Housing

Compatible Halo Incandescent E26 Screwbase Housings

HALO

5"

H5ICAT 5” Insulated Ceiling, AIR-TITE New Construction Housing

H5RICAT 5” Insulated Ceiling, AIR-TITE Remodel Housing

H5T 5” Non-IC, New Construction Housing

H5RT 5” Non-IC, Remodel Housing

H5TM 5” Non-IC, New Construction Housing (metric version - Canada)

H25ICAT 5” Shallow, Insulated Ceiling, AIR-TITE New Construction

6"

H7ICAT 6” Insulated Ceiling, AIR-TITE New Construction Housing

H7RICAT 6” Insulated Ceiling, AIR-TITE Remodel Housing

H7ICT 6” Insulated Ceiling, New Construction Housing

H7RICT 6” Insulated Ceiling, Remodel Housing

H7ICATNB 6” Insulated Ceiling, AIR-TITE New Construction Housing, No Socket Bracket

H7ICTNB 6” Insulated Ceiling, New Construction Housing, No Socket Bracket

H7T 6” Non-IC, New Construction Housing

H7RT 6” Non-IC, Remodel Housing

H7TNB 6” Non-IC, New Construction Housing, No Socket Bracket

H7TCP 6” Non-IC, Chicago Plenum, New Construction/Remodel Housing

H7UICT 6” Insulated Ceiling, Universal New Construction Housing

H7UICAT 6” Insulated Ceiling, Universal, AIR-TITE, New Construction Housing

H27ICAT 6” Shallow, Insulated Ceiling, AIR-TITE New Construction Housing

H27RICAT 6” Shallow, Insulated Ceiling, AIR-TITE Remodel Housing

H27ICT 6” Shallow, Insulated Ceiling, New Construction Housing

H27RICT 6” Shallow, Insulated Ceiling, Remodel Housing

H27T 6” Shallow, Non-IC, New Construction Housing

H27RT 6” Shallow, Non-IC, Remodel Housing

ORDERING INFORMATION

SAMPLE NUMBER: RL560WH6827Complete unit includes a RL560 Baffle-Trim LED Module and a 5” and 6” compatible housing, ordered separately.

RL56 Series Accessory (order separately)

80 CRIRL560WH6827= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 2700K, Matte WhiteRL560SN6827= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 2700K, Satin NickelRL560WH6830= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3000K, Matte WhiteRL560SN6830= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3000K, Satin NickelRL560WH6835= 5”/6” Retrofit Baffle - Trim LED Module, 83CRI, 3500K, Matte White

90 CRIRL560WH6930= 5”/6” Retrofit Baffle - Trim LED Module, 92CRI, 3000K, Matte WhiteRL560WH6935= 5”/6” Retrofit Baffle - Trim LED Module, 92CRI, 3500K, Matte White

RL56CLIP=Replacement kit of 5” and 6” Friction Clips for retrofitting into an existing housing without torsion spring receiving brackets. (One set of clips included with the unit.)

OT400P=Oversize Flat White Metal Trim Ring 6” I.D. x 9-1/4” O.D. (ring slips behind RL560 ring, in stepped configuration)

OT403P=Oversize White Plastic Trim Ring 6” I.D. x 8” O.D. (ring slips behind RL560 ring, in stepped configuration)

TRM690WH=Oversize Matte White Metal Trim Ring. Designed for RL560 ring to inset into oversize ring for an even (non-stepped) trim surface

HE26LED=Replacement screw base adapter (one included with unit)

R L 5 6 S e r i e s

Page 4: Halo RL56 spec sheet€¦ · The Halo RL560 is a complete LED Baffle-Trim Module for 5” and 6” aperture recessed downlights; suitable for new construction, remodel and retrofit

Note: Specifications and Dimensions subject to change without notice.Visit our web site at www.cooperlighting.com

CustomerFirstCenter1121Highway74SouthPeachtreeCity,GA30269770.486.4800FAX770486.4801CooperLighting5925McLaughlinRd.Mississauga,Ontario,CanadaL5R1B8905.507.4000FAX905.568.7049www.cooperlighting.com

HOUSINGS - Halo and All-Pro UL Listed Compatibility (continued)

HOUSINGS - UL Classified for retrofit compatibility

RL560 is UL Classified for retrofit in the following 5˝ and 6˝ recessed housings:

Halo LED Retrofit Enclosures

HALO 6"ML7BXRFK 6” Retrofit Enclosure, Non-IC, BX Whip

ML7E26RFK 6” Retrofit Enclosure, Non-IC, E26 Screw base Interface

Compatible All-Pro Incandescent E26 Screwbase Housings

All-Pro

Recessed Can Size Catalog Number Description

5"EI500AT 5” Insulated Ceiling, AIR-TITE New Construction Housing

EI500RAT 5” Insulated Ceiling, AIR-TITE Remodel Housing

ET500 5” Non-IC, New Construction Housing

ET500R 5” Non-IC, Remodel Housing

6"

EI700AT 6” Insulated Ceiling, AIR-TITE New Construction Housing

EI700RAT 6” Insulated Ceiling, AIR-TITE Remodel Housing

EI700 6” Insulated Ceiling, New Construction Housing

EI700R 6” Insulated Ceiling, Remodel Housing

EI700ATNB 6” Insulated Ceiling, AIR-TITE New Construction Housing, No Socket Bracket

EI700NB 6” Insulated Ceiling, New Construction Housing, No Socket Bracket

EI700U 6” Insulated Ceiling, Universal New Construction Housing

EI700UAT 6” Insulated Ceiling, Universal, AIR-TITE, New Construction Housing

ET700 6” Non-IC, New Construction Housing

ET700R 6” Non-IC, Remodel Housing

EI2700AT 6” Shallow, Insulated Ceiling, AIR-TITE New Construction Housing

EI2700 6” Shallow, Insulated Ceiling, New Construction Housing

EI2700R 6” Shallow, Insulated Ceiling, AIR-TITE Remodel Housing

ET2700 6” Shallow, Non-IC, New Construction Housing

ET2700R 6” Shallow, Non-IC, Remodel Housing

Juno® IC22, IC22R, IC22W, IC22S, IC23, IC23W, IC21, IC21R, IC2, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R

Capri Lighting CR1, PR1, QL1, R9ASIC, R5*

Lightolier®1104ICS*, 1104ICR*, 1104SIC*, 1104SICR*, 1004ICS*, 1004ICR*, 1004SIC*, 1004SICR*

1104ICX - Requires installation of ML7RAB retrofit adapter band accessory (not included).

Progress® Lighting P87-AT*, P86TG

Lithonia Lighting® L7X, L7XP

Thomas® Lighting PS1, R9ASIC/PS9RM

Prescolite® IBXS

Commercial Electric™ C7ICA (H3), H18

Elco Lighting® (HL7ICA) EL7ICA

*Requires replacement of torsion springs with included friction clips (accessory replacement kit: RL56CLIP).

Juno®, Capri Lighting, Lightolier®, Lithonia Lighting®, Thomas® Lighting, Elco Lighting®, Progress® Lighting, Prescolite® and Commercial Electric™ and their product brand names, where identified above, are tradenames or trademarks of each respective company and Cooper makes no representations on these trademarks.

R L 5 6 S e r i e s