hair care formulary - essential ingredients, · pdf filehair care formulary april, 2008 pure...

Hair Care Formulary

April, 2008

pure in cosmetics

2

Contents

SHAMPOOS........................................................................................................................................ 3

Anti-Dandruff Shampoo with BENTONE® MA ............................................................................ 3

2 in 1 Conditioning Shampoo with BENTONE® EW ................................................................... 4

Hair Shampoo with BENTONE® EW........................................................................................... 5

Pearlised Shampoo with THIXCIN® R ........................................................................................ 6

CONDITIONERS ................................................................................................................................. 7

Creamy Rinse Conditioner with BENTONE GEL® PTIS V.......................................................... 7

STYLING AND TREATMENTS........................................................................................................... 8

Ethnic Hair Moisturising Cream with BENTONE GEL® MIO V and BENTONE® EW.................. 8

Glossifying Hair Pomade with BENTONE GEL® MIO V ............................................................. 9

Hair Defining Complex with BENTONE GEL® VS-5PC V......................................................... 10

Hair Dressing Cream with THIXCIN® R and BENTONE GEL® GTCC V .................................. 11

Hair Pomade with BENTONE GEL® PTIS V............................................................................. 12

Hair Pomade with BENTONE GEL® MIO V, BENTONE GEL® VS5-PC V and THIXCIN® R.... 13

Hair Relaxer Cream with BENTONE GEL® MIO V ................................................................... 14

Hair and Scalp Grease with THIXCIN® R and BENTONE GEL® LOI V .................................... 15

Hair Styling Clay with BENTONE GEL® VS-5PC V .................................................................. 16

Hair Styling Stick with THIXCIN® R........................................................................................... 17

Spiky Hair Clay with THIXCIN® R and BENTONE GEL® CAO V.............................................. 18

3

SHAMPOOS

Anti-Dandruff Shampoo with BENTONE® MA

BY3031/13

Advantages

The presence of BENTONE® MA, rheological additive in this system:

• Imparts viscosity

• Helps suspend the Zinc Pyrithione

• Produces a stable emulsion at increased temperatures

Ingredient Supplier % w/w PHASE A BENTONE® MA (Hectorite) ELEMENTIS Specialties 1.5 Methocel E15 (Hydroxypropyl Methylcellulose) Dow Chemical 0.25 Deionised Water 52.9 Tegosoft TN (C12-15 Alkyl Benzoate) Evonik Degussa 4.0 Tego Alkanol 1618 (Cetearyl Alcohol) Evonik Degussa 1.2 Paratexin P (Propyl Paraben) S. Black Group 0.1 PHASE B Zinc Omadine 48% Aq. Dispersion (Zinc Pyrithione) Arch Personal Care 2.0 PHASE C SERDET® DFK 30 (Sodium Lauryl Sulfate) ELEMENTIS Specialties 30.0 Tego Betaine F50 (Cocamidopropyl Betaine) Evonik Degussa 7.0 Tego Pearl N 100 (Glycol Distearate and Steareth-4) Evonik Degussa 3.0 Monamid CMA (Cocamide MEA) Uniqema 2.5 PHASE D Lanodant DM (DMDM Hydantoin) RITA 0.5 Rain Fresh (Fragrance) Bell Flavors & Fragrances 0.1 FD & C Green #3 (0.1% Solution) (Green 3) 0.25 Citric Acid (50% Solution) To pH 5.5 – 6.0

Mixing Procedure

1. Predisperse Phase A with high shear and mix for at least 20 minutes until uniform.

2. Disperse Phase B in Phase A with high shear and mix until uniform.

3. Add Phase C ingredients in the order given, using lower shear mixing.

4. Add Phase D ingredients in the order given, using lower shear mixing until uniform. © Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

4

2 in 1 Conditioning Shampoo with BENTONE® EW BY3130/31

Advantages

The presence of BENTONE® EW, rheological additive in this system:

• Imparts viscosity

• Produces a creamier textured foam

• Reduces static

• Produces a stable system at increased temperatures

• Improves storage stability

• Leaves hair feeling soft and glossy

Ingredient Supplier % w/w PHASE A BENTONE® EW (Hectorite) ELEMENTIS Specialties 1.5 Deionised Water 48.5 PHASE B Mackadet EQ-178 (Decyl Glucoside and Cocamidopropyl Hydroxysultaine and Cocamidopropyl Betaine and Cocamide MIPA and Disodium Laureth Sulfosuccinate and Disodium Lauryl Sulfosuccinate)

Mcintyre Group LTD 45.6

Propylene Glycol Dow Chemical Company 1.0 PHASE C Dow Corning 1664 Emulsion (Dimethicone and Laureth-4 and Laureth-23)

Dow Corning 3.0

Vegetable Glycerin 8.0 Crillet 3 Super (Polysorbate 60) Croda 3.3 PHASE D Germaben II (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.2

Rain Fresh (Fragrance) Bell Flavors & Fragrances 0.1 FD&C Green #3 (0.1% Solution) (Green 3) 0.1 Citric acid (50% solution) Adjust PH: 5.5-6.5 q.s.

Mixing Procedure

1. Disperse Phase A with high shear and mix for at least 20 minutes until uniform.

2. Add Phase B, mixing well, but without causing foamimg.

3. Add Phase C to Phase A+B with low shear mixing until uniform.

4. Add Phase D one at a time with gentle mixing until uniform. © Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

5

Hair Shampoo with BENTONE® EW RECF-147

Advantages

The presence of BENTONE® EW, rheological additive in this system:

• Produces a creamier textured foam

• Leaves wet hair feeling slightly conditioned

• Reduces the static problem

• Provides thermostable viscosity control

• Gives softer hair feeling and gloss

Ingredient Supplier % w/w PHASE A BENTONE® EW (Hectorite) ELEMENTIS Specialties 1.5 Deionised Water 51.9 PHASE B SERDET® DFK 30 (Sodium Lauryl Sulfate) ELEMENTIS Specialties 28.0 Tego Betain F50 (Cocamidopropyl Betaine) Evonik Degussa 6.0 Plantacare 818 UP (Coco Glucoside) Cognis 6.0 PHASE C Tego Pearl N100 (Glycol Distearate and Steareth 4) Evonik Degussa 3.0 Abil B8832 (Dimethicone Copolyol) Evonik Degussa 0.2 PHASE D Genapol L3 (Laureth-3) Clariant 2.0 D-Panthenol 75 W (Panthenol) Roche 1.0 Perfume 0.2 Paratexin FPX (Phenoxyethanol and Methylparaben and Ethylparaben and Propylparaben and Butylparaben and Isobutylparaben)

S. Black Group 0.2

PHASE E Purac PH90 (Lactic Acid) Purac pH5.5-6.0

Mixing Procedure

1. Disperse Phase A using Silverson homogenising and continue to mix for 15 - 20 minutes.

2. Using a propeller stirrer, add Phase B.

3. With continued propeller stirring add Phase C.

4. Add Phase C with propeller stirring.

5. Adjust the pH if required with Phase E.

© Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

6

Pearlised Shampoo with THIXCIN® R HPA17/18/9

Advantages

The presence of THIXCIN® R, rheological additive in this system:

• Improves application and dispensability

• Provides pearl stabilisation and overall improved stability

• Enhances final shampoo appearance

Ingredient Supplier % w/w PHASE A Deionised Water 39.1 Antil 120 (PEG-120 Methyl Glucose Dioleate) Evonik Degussa 0.75 PHASE B SERDET® DFK 30 (Sodium Lauryl Sulfate) ELEMENTIS Specialties 39.3 Tego Betain F50 (Cocamidopropyl Betaine) Evonik Degussa 13.3 Genapol PDB (Glycol Distearate and Laureth-4 and Cocamidopropyl Betaine)

Clariant 3.0

PHASE C Tegosoft GC (PEG-7 Glyceryl Cocoate) Evonik Degussa 2.0 Jojoba Oil S. Black 0.5 PHASE D THIXCIN® R ELEMENTIS Specialties 0.1 PHASE E Propylene Glycol 1.75 Paratexin FPX (Phenoxyethanol and Methylparaben and Ethylparaben and Propylparaben and Butylparaben and Isobutylparaben)

S. Black Group 0.2

Mixing Procedure

1. Warm Phase A slightly to melt.

2. Add Phase B with propeller stirring.

3. Mix Phase C. Heat to 60°C.

4. Add Phase D and mix using a silverson homogeniser for 15 minutes.

5. Add Phase C+D to Phase A+B with propeller stirring.

6. Add Phase E to Phase A+B+C+D and mix.


7

CONDITIONERS

Creamy Rinse Conditioner with BENTONE GEL® PTIS V

BY3031/39

Advantages

The presence of BENTONE GEL® PTIS V, rheological additive in this system:



Ingredient Supplier % w/w PHASE A BENTONE GEL® PTIS V (Pentaerythrityl Tetraisostearate and Disteadimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 3.0

Incroquat Behenyl TMS (Behentrimonium Methosulfate and Cetearyl Alcohol)

Croda 3.5

Cropure Olive (Olea Europaea (Olive) Fruit Oil) Croda 3.0 Dow Corning Q2-8220 Conditioning Additive (Trimethylsilylamodimethicone)

Dow Corning 2.0

Tego Alkanol 16 (Cetyl Alcohol) Evonik Degussa 1.0 PHASE B Deionised Water 80.5 Varisoft 432 CG (Dicetyldimonium Chloride) Evonik Degussa 2.0 Glycerine RITA 2.0 Incromectant AQ (Acetamidopropyl Trimonium Chloride) Croda 1.0 PHASE C Hydrotriticum 2000 (Hydrolyzed Wheat Protein) Croda 1.0 Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.5

Mixing Procedure

1. Mix Phase A and heat to 75-80°C.

2. In a separate container combine Phase B and heat to 75-85°C.

3. Add Phase A to Phase B with high agitation.

4. Cool to 45°C and add Phase C with low agitation until uniform. © Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

8

STYLING AND TREATMENTS

Ethnic Hair Moisturising Cream with BENTONE GEL® MIO V and BENTONE® EW

BY3031/40

Advantages

The presence of BENTONE GEL® MIO V and BENTONE® EW, rheological additives in this system:

• Creates a light-feel and reduces tackiness

• Gives body, and allows easy spreading, due to the increased thixotropic nature



Ingredient Supplier % w/w PHASE A BENTONE® EW (3% Dispersion) (Hectorite) ELEMENTIS Specialties 33.5 Deionised Water 25.5 Ritapan D (D-Panthenol) RITA 1.0 PHASE B BENTONE GEL® MIO V (Mineral Oil and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 39.0

Drakeol 7 (Mineral Oil) Penreco 25.0 Arlacel 165 (Glyceryl Stearate and PEG-100 Stearate) Uniqema 6.0 Lanette O Wax (Cetearyl Alcohol) Cognis 3.0 PHASE C SERDET® DFK 30 (Sodium Lauryl Sulfate) ELEMENTIS Specialties 30.0 Tego Betaine F50 (Cocamidopropyl Betaine) Evonik Degussa 7.0 Tego Pearl N 100 (Glycol Distearate and Steareth-4) Evonik Degussa 3.0 Monamid CMA (Cocamide MEA) Uniqema 2.5 PHASE D Vitamin E (Tocopherol) BASF 0.5 Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methyparaben and Propylparaben)

ISP 0.5

Aloe Vera 1:1 (Aloe Barbadensis Leaf Extract) Caribbean Aloe Vera 0.2

Mixing Procedure

1. Predisperse Phase A and heat to 70 - 75 °C.

2. Disperse Phase B and heat to 75 - 80 °C.

3. Add Phase B into Phase A using a homogeniser for 15-20 minutes.

4. Cool to 45 °C and add Phase C in the order listed. Mix well until uniform. © Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

9

Glossifying Hair Pomade with BENTONE GEL® MIO V BY2968/74

Advantages

The presence of BENTONE GEL® MIO V, rheological additive in this system:

• Creates a non-greasy glossing pomade, which can create incredible styles

• Gives body and allows easy spreading, due to the increased thixotropic nature



Ingredient Supplier % w/w PHASE A BENTONE GEL® MIO V (Mineral Oil and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 3.0

Drakeol 7 (Mineral Oil) Penreco 22.0 PHASE B Polychol 15 (Laneth-15) Croda 24.0 Crill 45 (Sorbitan Trioleate) Croda 3.5 Crill 4 (Sorbitan Oleate) Croda 1.0 PHASE C Deionised Water 34.0 Propylene Glycol Dow Corning 12.0 PHASE D Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.5

Mixing Procedure

1. Disperse Phase A and heat to 75 - 80 °C.

2. In a separate container combine Phase B and heat to 75 - 85 °C.

3. Add Phase B to Phase A with adequate agitation.

4. Premix Phase C and heat to 70 - 75 °C.

5. Add Phase C to the mixture with high shear mixing until uniform.

6. Add Phase D to the mixture at 70 °C and mix till uniform.

7. Hot pour into the jar at 70 °C.


10

Hair Defining Complex with BENTONE GEL® VS-5PC V KB5/050

Advantages

The presence of BENTONE GEL® VS-5PC V, rheological additive in this system:

• Improved emulsion stability

• Enriches the formulation

• Imparts viscosity and body

• Provides ease of application and spreadability

• Speeds adsoprtion onto the hair

• Enhances overall hair appearance and eliminates stickiness

• Smoothes the hair cuticle to provide a soft feel, with a combination of good curl definition and style management

Ingredient Supplier % w/w PHASE A BENTONE GEL® VS-5PC V (Cyclopentasiloxane and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 1.0

Incroquat Behenyl TMS (Cetearyl Alcohol and Behentrimonium Methosulphate)

Croda Chemicals 4.0

PHASE B Deionised Water 78.4 Glycerine 4.0 Luviskol VA64 Powder (VP/VA Copolymer) BASF 2.0 PHASE C Dow Corning 345 Fluid (Cyclomethicone) Dow Corning 10.0 PHASE D Propylene Glycol Dow Corning 12.0 Paratexin FPX (Phenoxyethanol and Methylparaben and Ethylparaben and Propylparaben and Butylparaben and Isobutylparaben)

S. Black Group 0.2

PHASE E Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.5

Mixing Procedure

1. Heat Phase A to 75-80°C.

2. In a separate vessel heat Phase B to 75-80°C.

3. Add Phase A to Phase B with silverson homogenising and mix for 20 minutes.

4. With propeller stirring add Phase C.

5. Mixing on the propeller stirrer, cool the product to 35°C.

6. Below 35°C add Phase D with stirring.

7. Measure the pH and if needed adjust to pH5.5. © Copyright 2008, Elementis Specialties, Inc. All rights reserved. Copying and/or downloading of this document or information therein for republication is not allowed unless prior written agreement is obtained from Elementis Specialties, Inc. ® Registered trademark of Elementis Specialties, Inc. The information in this publication is, to the best of our knowledge, true and accurate, but since the conditions of use are beyond our control, no warranty is given or to be implied in respect of such information. In every case, caution must be exercised to avoid violation or infringement of statutory obligations and any rights belonging to a third party. We are, at all time, willing to study customers’ specific outlets involving our products in order to enable their most effective use.

11

Hair Dressing Cream with THIXCIN® R and BENTONE GEL® GTCC V BY3130/74

Advantages

The presence of THIXCIN® R and BENTONE GEL® GTCC V, rheological additives in this system:

• Create hair definition and style without contributing to hair stiffness, keeping the hair looking sleek and frizz free

• Leave hair feeling soft and smooth, with a glossy shine

• Produce a stable emulsion at increased temperatures

• Improve storage stability

Ingredient Supplier % w/w PHASE A BENTONE GEL® GTCC V (Caprylic/Capric Triglyceride and Stearalkonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 4.0

THIXCIN® R (Trihydroxystearin) ELEMENTIS Specialties 0.5 Abil OSW 5 (Cyclopentasiloxane and Dimethiconol) Evonik Degussa 8.0 Dow Corning 245 Fluid (Cyclopentasiloxane) Dow Corning 6.0 Abil EM 90 (Cetyl PEG/PPG-10/1 Dimethicone) Evonik Degussa 2.5 Drakeol 34 (Mineral Oil) Penreco 2.0 Abil Soft AF 100 (Methoxy PEG/PPG-7/3 Aminopropyl Dimethicone)

Evonik Degussa 0.5

PHASE B Deionised Water 75.5 Sodium Chloride 0.5 PHASE C Deionised Water 34.0 Propylene Glycol Dow Corning 12.0 PHASE D Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.5

Mixing Procedure

1. Combine Phase A and heat to 60 - 70 °C.

2. In a separate container premix Phase B and heat to 60 - 70 °C.

3. Slowly add Phase B to Phase A with shear for 10 minutes.

4. Homogenize at 65 °C for 10 minutes.

5. Cool down to 45 °C and add Phase C.


12

Hair Pomade with BENTONE GEL® PTIS V KR9/092

Advantages

The presence of BENTONE GEL® PTIS V, rheological additive in this system:

• Helps provide an emollient film, which leaves the hair with a better shine

• Aides wet and dry combability

• Leaves the hair softer

• Increases viscosity and enhanced stability

Ingredient Supplier % w/w PHASE A BENTONE GEL® PTIS V (Pentaerythrityl Tetraisostearate and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 6.0

Tego Alkanol 1618 (Cetearyl Alcohol) Evonik Degussa 11.0 Mineral Oil 7.0 Tegosoft Liquid (Cetearyl Ethylhexanoate) Evonik Degussa 6.0 Beeswax 5.0 Tegin 4100 Pellets (Glyceryl Stearate) Evonik Degussa 4.0 Arlacel 987 (Sorbitan Isostearate) Uniqema 4.0 PHASE B Dow Corning 345 Fluid (Cyclomethicone) Dow Corning 57.0

Mixing Procedure

1. Combine Phase A and heat to 110°C with mixing.

2. Cool with mixing to 70°C.

3. Add Phase B to main batch, with mixing.

4. Cool with mixing.


13

Hair Pomade with BENTONE GEL® MIO V, BENTONE GEL® VS5-PC V and THIXCIN® R BY3130/61

Advantages

The presence of BENTONE GEL® MIO V, BENTONE GEL® VS5-PC V and THIXCIN® R, rheological additives in this system:

• Create lift easily, due to the unique texture, leaving the hair feeling soft and smooth, with a glossy shine

• Produce a stable pomade at increased temperatures


Ingredient Supplier % w/w PHASE A THIXCIN® R (Trihydroxystearin) ELEMENTIS Specialties 2.0 Drakeol 7 (Mineral Oil) Penreco 47.5 PHASE B BENTONE GEL® MIO V (Mineral Oil and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 30.0

BENTONE GEL® VS-5PC V (Cyclopentasiloxane and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 10.0

Cropure Avocado (Persea Gratissima (Avocado) Oil) Croda 5.0 Dow Corning 345 Fluid (Cyclomethicone) Dow Corning 5.0 Vitamin E Acetate (Tocopheryl Acetate) BASF 0.3 PHASE C Unisept P (Propylparaben) Universal Preserv-A-Chem 0.2

Mixing Procedure

1. Disperse Phase A with higher shear at 55 - 60 °C for 15-20 minutes.

2. In a separate container combine Phase B and mix until uniform.

3. Add Phase B to Part A with adequate agitation.

4. Cool down to 60 °C and add Phase C with slow shear until uniform.


14

Hair Relaxer Cream with BENTONE GEL® MIO V BY3130/36

Advantages

The presence of BENTONE GEL® MIO V, rheological additive in this system:

• Gives body and allows easy spreading, due to the increased thixotropic nature

• Promotes even distribution



Ingredient Supplier % w/w PHASE A BENTONE GEL® MIO V (Mineral Oil and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 5.0

Carnation (Mineral Oil) Crompton 10.0 Snow White Petrolatum (Petrolatum) UPI 10.0 PHASE B Polawax NF (Emulsifying Wax) Croda 8.0 Volpo S10 (Steareth-10) Croda 2.5 Crodafos N10N (DEA-Oleth-10 Phosphate) Croda 2.0 Lanette O Wax (Cetearyl Alcohol) Cognis 1.5 PHASE C Deionised Water 51.7.0 Propylene Glycol Dow Corning 2.0 PHASE D NaOH 25% Solution 6.8 Germaben II E (Propylene Glycol and Diazolidinyl Urea and Methylparaben and Propylparaben)

ISP 0.5

Mixing Procedure

1. Disperse Phase A and heat to 75 – 80 °C.

2. In a separate container combine Phase B and heat to 75 - 85 °C.


4. Premix Phase C and heat to 70 - 75 °C.

5. Add Phase C to the mixture with homogenizing.

6. Add Phase D, in the order given, to the mixture when temperature reaches 45 °C and mix well with low shear.


15

Hair and Scalp Grease with THIXCIN® R and BENTONE GEL® LOI V BY3130/71

Advantages

The presence of THIXCIN® R and BENTONE GEL® LOI V rheological additives in this system:

• Create a light-feel and allow easy spreading, due to the increased thixotropic nature

• Produce a stable system at increased temperatures


Ingredient Supplier % w/w PHASE A BENTONE GEL® LOI V (Lanolin Oil and Isopropyl Palmitate and Stearalkonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 20.0

Drakeol 7 (Mineral Oil) Penreco 30.0 PHASE B THIXCIN® R (Trihydroxystearin) ELEMENTIS Specialties 2.0 PHASE C Beeswax White SP 422 (Beeswax) Strahl & Pitsch 10.0 Penreco Snow (Petrolatum) Penreco 34.0 Lanette O Wax (Cetearyl Alcohol) Cognis 3.5 PHASE D Unisept P (Propylparaben) Universal Preserv-A-Chem 0.4 Fragrance International Flavors &

Fragrances 0.1

Mixing Procedure

1. Heat Phase A to 55 - 60 °C and mix.

2. Add Phase B to Phase A and mix with high shear for 15 minutes.

3. In a separate container combine Phase C and heat to 75 - 85 °C and mix until uniform.

4. Add Phase A+B to Phase C with adequate agitation.

5. Cool down to 60 °C, and add Phase C with slow shear, mixing until uniform.


16

Hair Styling Clay with BENTONE GEL® VS-5PC V Florotech KR7/028

Advantages

The presence of BENTONE GEL® VS-5PC V, rheological additive in this system:

• Improved stability, viscosity and body

Ingredient Supplier % w/w PHASE A BENTONE GEL® VS-5PC V (Cyclopentasiloxane and Disteardimonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 5.0

Penreco Snow (Petrolatum) Penreco 28.50 Floresters 15 (Jojoba Esters) Floratech 7.0 Beeswax White Refined SP 44 (Beeswax) Strahl & Pitsch 6.0 S & P Carnauba Wax Refined (Copernica Cerifera Wax) Strahl & Pitsch 6.0 Florasun 90 (Helianthus Annuus Seed Oil) Floratech 5.0 Floresters 20 (Jojoba Esters) Floratech 3.0 Altalc 200 USP (Talc) Luzenac 2.0 PHASE B Deionised Water 26.3 Florasolve PEG-150 Hydrogenated Jojoba (PEG-150 Jojoba Hydrogenated)

Floratech 10.0

Paratexin M (Methylparaben) S. Black Group 0.2 PHASE C Tocopherol Cognis 1.0

Mixing Procedure

1. Combine Phase A and heat to 90 °C with propeller agitation. Mix for 20 minutes.

2. Combine Phase B and mix at 80 °C with propeller agitation.

3. Slowly add Phase A to Phase B with fast propeller agitation.

4. Cool to 75 °C and add Phase C.

5. Pour into a container and allow to cool to room temperature.


17

Hair Styling Stick with THIXCIN® R BY3130/14

Advantages

The presence of THIXCIN® R, rheological additive in this system:

• Builds viscosity by acting as a stiffening agent


• Improves pay off, adds lubricity and gives a buttery feel

Ingredient Supplier % w/w PHASE A THIXCIN® R (Trihydroxystearin) ELEMENTIS Specialties 8.0 Unicast-CO (Ricinus Communis (Castor) Seed Oil) Universal Preserv-A-Chem 54.7 PHASE B Penreco Snow (Petrolatum) Penreco 15.0 Beeswax White SP 422 (Beeswax) Strahl & Pitsch 10.0 Shebu (Butyrospermum Parkii (Shea Butter)) RITA 6.0 Candelilla Wax SP 37 (Euphorbia Cerifera (Candelilla) Wax) Strahl & Pitsch 4.0 Carnauba Wax SP 63 (Copernicia Cerifera (Carnauba) Wax) Strahl & Pitsch 2.0 PHASE C Unisept P (Propylparaben) Universal Preserv-A-Chem 0.2 Fragrance International Flavors &

Fragrances 0.1

Mixing Procedure

1. Combine Phase A at 55-60 °C with high shear for 15-20 minutes.

2. In a separate container combine Phase B and heat to 75 – 85 °C until uniform.


4. Cool down to 60 °C, and add Phase C with slow shear until uniform.


18

Spiky Hair Clay with THIXCIN® R and BENTONE GEL® CAO V BY3130/69

Advantages

The presence of THIXCIN® R and BENTONE GEL® CAO V, rheological additives in this system:

• Provide a high degree of hold for a longer time, for gravity defying styles

• Allow easy spreading, due to the increased thixotropic nature

• Produce a stable system at increased temperatures


Ingredient Supplier % w/w PHASE A THIXCIN® R (Trihydroxystearin) ELEMENTIS Specialties 2.0 Unicast-CO (Ricinus Communis (Castor) Seed Oil) Universal Preserv-A-Chem 29.0 PHASE B BENTONE GEL® CAO V (Ricinus Communis and Stearalkonium Hectorite and Propylene Carbonate) ELEMENTIS Specialties 18.0

Carnation (Mineral Oil) Crompton 15.0 Beeswax White SP 422 (Beeswax) Strahl & Pitsch 10.0 Parvan 127 (Paraffin) Exxon 8.0 Penreco Snow (Petrolatum) Penreco 8.0 Carnauba Wax SP 63 (Copernicia Cerifera (Carnauba) Wax) Strahl & Pitsch 6.0 Tagat CH 40 (PEG-40 Hydrogenated Castor Oil) Evonik Degussa 3.5 PHASE C Unisept P (Propylparaben) Universal Preserv-A-Chem 0.5

Mixing Procedure

1. Combine Phase A at 55-60 °C with high shear for 15 - 20 minutes.

2. In a separate container combine Phase B and heat to 75 - 85 °C, and mix until uniform.


4. Cool down to 60 °C, and add Phase C with slow shear. Mix until uniform.


hair care formulary - essential ingredients, · pdf filehair care formulary april, 2008 pure...

Documents